|
| 1 | Material and labour for preparation of old wall surfaces of any descriptionand applying one coat of cement based paint of approved tint on wall surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Material and labour for preparation ofsurfaces of any description of old painted surfaces and applying one coat of plastic emulsion paint of approvedtint complete all as specified and as directed. |
| 3 | Complete removal of existing treatment of wall surfaces and finishing the surface with 3mm thickBirla / JK wall care putty to receive the good and smooth surfaces and applying two coats of plastic emulsion paint of approved tint over a coat of primer complete all as specified and as directed. |
| 4 | Material and labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / litre and UV resistance as per IS 15489-2004. Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqmweather proof emulsion paint over andincludingpriming coat of exterior primer including removal of existing treatment as per the manufacturer instructions complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material and labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / litre and UV resistance as per IS 15489-2004.Alkalie and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43litre / 10 sqmweather proof emulsion paint over and includingpriming coat of exterior primer includingpreparation new wall surfaces of any descriptionas per the manufacturer instructions complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material and labour for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of approved tintcomplete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for15 mm thick rendering of brick or concrete surface in cement mortar 1:4 and finishing the surface with even and smooth without using extra cement including taking down old plaster complete all specified and directed. |
| 8 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Material and labour prelaminated particle board18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with nails to timber frame work as in shutters for kitchen shelves / cupboards with nails fixed in repairs complete all as specified and as directed. |
| 10 | Material and labour prelaminated particle board18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with nails to timber frame work as in pelmet boxes or in narrow width n.exc. 15cm each with nails fixed in repairs complete all as specified and as directed. |
| 11 | Supply and fix in repairs of drapery rod 20mm dia, decorative typecomplete all as specified and as directed. |
| 12 | Supply and fix in repairs of end stopper, decorative type and fixing brackets for the drapery rod 20mm dia. (One Set comprises of 2 No. of decorative type end stopper 2 No. of fixing brackets) and fixed-in-repairs complete all as specified and as directed. |
| 13 | Supply and fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width ofaperture 1.40mm and fixed with tinned tacks or aluminium wire staples complete all as specified and as directed by the Engineer- -in-Charge. |
| 14 | Supply and fix in repairs ball catcher with 8mm dia steel ball, brass body and striking plate including letting in and fixed complete all as specified and as directed. |
| 15 | Supply and fix in repairs aluminium anodised barrel tower bolt of extruded section of length 100mm complete all as specified and as directed. |
| 16 | Supply and fix in repairs 40mm width of flap (when open) contineuous (piano) hinges, mild steel, bright finish or electro galvanisedcomplete all as specified and as directed. |
| 17 | Supply and fix in repairs mortice lock brass vertical type 4 levers 100mm, complete all as specified and as directed. MAKE :-Godrej or equivalent. |
| 18 | Supply and fix 100mm longbutt hinges medium weight coldrolled mild steel complete all as specified and as directed. |
| 19 | Supply and fix in repairs 150mm floor door stopper of aluminium alloy powder coated, with hard down steel spring, shoe complete all as specified and as directed. |
| 20 | Supply and fix in repairs 100mm aluminium mortice lock with four levers (vertical type)heavy dutycomplete all as specified and as directed.MAKE :- Godrej or equivalent |
| 21 | Material and labour washing, rubbing down and stopping of old distempered wallsurfaces and applying two coat of distemper oil emulsionof approved tint on wall surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material and labour washing, rubbing down and stopping of distempered and painted surfacesof old distemperedsurfaces and applying one coat of distemper oil emulsion of approved tint on ceiling surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Materila and labour washing, rubbing down and stopping of distempered and painted surfaces of old distempered surfaces and applying two coat of distemper oil emulsion on ceiling surfaces complete all as specified and as directed by Engineer -in - charge. |
| 24 | Material and labour for grinding of old terrazzo / kota tile floor, skirting, marble / granite kitchen cooking platform using machine with carborandum of 220 to 350 grit and applying oxalic acid powder, machine fitted with hessain bobs and finally applied with wax polish complete all as specified and as directed. |
| 25 | Supply and fixpowder coated aluminium (minimum thickness of powder coating 50 micron) section as in door shutters, aluminium section weighing 0.55 kg/M including joining cleats, glazing clips, rubber neoprene packing, handles - 2 Nos in each door, hinges, snap beading, screws complete fixed in repairs complete all as specified and as directed. |
| 26 | Supply and fixpowder coated aluminium (minimum thickness of powder coating 50 micron) section as in windows and ventilatorshutters, side hung type, without sash bars, aluminium section weighing 0.55 kg/M including joining cleats, glazing clips, rubber packing , hinges type B-21 100mm long2 Nos, suitable handle 1 No, snap beading, screws complete fixed in repairs complete all as specified and as directed. |
| 27 | Supply and fixingpowder coated aluminium (minimum thickness of powder coating 50 micron)framefor doors, windows, ventilators, with one or more rebates including joining cleats for fixingincluding taking down old joineryetc., complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply and fix in repairs sheet glass pane4mm thick selected quality plain glass, in square n.exc 0.5 sqm each pane with rubber beading / glass putty etc complete all as specified and as directed. |
| 29 | Supply and fix in repairs figured glass pane pin headedincluding removing loose or decayed putty sheet figured glass, pin head type and glazing with oil putty / rubber beadingin square not exceeding 0.5 sqm in each pane of 4mm thick etc complete all as specified and as directed. |
| 30 | Supply and fix sheet glass pane 4mm thick selected quality plainglass, in square not exc 0.5 sqm each pane with rubber beading / glass putty etc complete all as specified and as directed. |
| 31 | Supply and fix in repair aluminium (die cast) body door closer, hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 32 | Supply and fix5.5mm thick sheet glass ordinary quality and glazing with oil putty / glazing pins / spring clips / rubber beadsarea exc. 0.50 sqm eachpane complete all as specified and as directed. |
| 33 | Supply and fix in repairs solar control film 50 micron thick reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed. |
| 34 | Supply and fix in repairs venetian blinds vertical type 100mm width with approved fabric and powder coated aluminium fittings such as top rails, metal weight nylon button loops etc to match with the top rail metal base complete all as specified and as directed. |
| 35 | Resecuring or easing and adjusting of shutters, without taking down areaexc. 1 sqm but not exc. 2 sqm each complete all as specified and as directed. |
| 36 | Resecuring or easing and adjusting of shutters, without taking down area exc.2 sqm each complete all as specified and as directed. |
| 37 | Supply and fix in repairs 15mm dia Chromium Plated cast copper alloy bib taps with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 38 | Supply and fix in repairs,Bib taps long body15mm dia without wall flange, foam flow, chromium plated, fancy type, screwed down, screwed for iron pipe complete all as specified and as directed. |
| 39 | Supply and fixing Chromium Plated wall mixer 3-in-1 system including three joints to steel pipes, plugging and screwing to walls fixed in repairs complete all as specified and as directed.MAKE :- Jaquar CAT No. 7281 or techno commercially equivalent makes specified in PS. |
| 40 | Supply and fixing Chromium Plated wall mixer 2-in-1 system including three joints to steel pipes, plugging and screwing to walls fixed in repairs complete all as specified and as directed.MAKE :- Jaquar or techno commercially equivalent makes specified in PS. |
| 41 | Supply and fix in repairs brass chromium plated bottle traps for WHB / urinal with inlet and outlet screwed for pipe including necessary packing union and cap, suitable for 40mm bore traps complete all as specified and as directed. |
| 42 | Supply and fixing brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap, suitable for 32mm bore traps and fixed complete all as specified and as directed. |
| 43 | Supply and fix in repairs 15mm dia Pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 44 | Supply and fix in repairs 15mm dia fancy typechromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 45 | Supply and fix in repairs15mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 46 | Supply and fix in repairs20mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 47 | Material and labour for waste fittings, 32mm dia brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed in repairs complete all as specified and as directed. |
| 48 | Supply and fix in repairs 15mm dia fancy typechromium plated with long shank stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle (concealed type) screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 49 | Supplying and fix in repairs PVC connection 15mm size with PTMT nuts of length 450mm,complete all as specified and as directed. |
| 50 | All as per Sl Item No 49 above but 600mm lengths all as specified and as directed. |
| 51 | Supply and fix in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern including jointing to squatt pattern closet and making good the floor complete all as specified and as directed. |
| 52 | Supply and fix in repairs stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plugs, waste pipe and washersincluding cast iron cantilever brackets, connecting union etc over all size 915mm x 460mm with bowl size 410mm x 330mm x 200mm complete all as specified and as directed. |
| 53 | Supply and fix in repairs PVC flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle etc complete all as specified and as directed. |
| 54 | Supply and fix gun metal globe or gate valve of 20mm bore dia with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and as directed. |
| 55 | Supply and fix in repairs vitreous china wash handbasin, white, flat back, size 550mm x 400mm excluding taps but including brackets, cutting for and pinning brackets or errecting stands / rock bolts to fixing complete all as specified and as directed. |
| 56 | Supply and fix in repairs water closet seat cover white colour closed pattern with flat bottom complete all as specified and as directed. |
| 57 | Supply and fix in repairs grating of 125mm dia of stainless steel for floor trap etc complete all as specified and as directed. |
| 58 | Supply and fix in repairs grating of 125mm diabut with holes of stainless steel for floor trap etc complete all as specified and as directed. |
| 59 | Material and labour for 15mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing steel tubing and connections complete all as specified and as directed. |
| 60 | Material and labour for 20mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing steel tubing and connections complete all as specified and as directed. |
| 61 | Supply and laying in repairs of 20mm diaCPVC pipes with SDR 11 fittings on walls / ceiling or laying in floors complete including all fittingscomplete all as specified and as directed. |
| 62 | All as per Sl Item No 61 above but 25mm dia CPVC pipes |
| 63 | Supply and fix in repairs brass Chromium Platedshower rose 125mm size with or without / swivel joints complete all as specified and as directed. |
| 64 | Supply and fix in repairs EWC vitreous china pan with \"S\" or \"P\" trapwhite including connection to drain or out going pipe and flushing pipe, antisyphonage pipe etc complete all as specified and as directed. |
| 65 | Supply and fix fancy type chromium plated 2 way bib tap15mm dia with Chromium Plated flangefixed in repairs complete all as specified and as directed. MAKE :-Jaquar or techno commercially equivalent makes specified in PS. |
| 66 | Supply and fix in repairs health faucet (ABS Body) mid steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed. |
| 67 | Cutting screwing existing steel tubing of 15mm dia for addition / alterations to pipesetc., complete all as specified and as directed. |
| 68 | Cutting screwing existing steel tubing of 20mm dia for addition / alterations to pipesetc complete all as specified and as directed. |
| 69 | Taking up or down 15mm dia GI old tubing and connections including cleaning and re-fixing in new or old positionto walls / chases / ceilings or laying in floors etc complete all as specified and as directed. |
| 70 | Taking up or down 20mm dia GI old tubing and connections including cleaning and re-fixing in new or old positionto walls / chases / ceilings or laying in floors etc complete all as specified and as directed. |
| 71 | Supply and fix in repairs toilet paper holder with flat recessed type stainless steel body complete all as specified and as directed. |
| 72 | Supply and fix in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 73 | Supply and fix in repairs kitchen stand made out of stainlesssteel ofsize length 910mm x width 225mm x height 790mm complete all as specified and as directed.MAKE :-Prayag / Maruti or equivalent |
| 74 | Supply and fix in repairs vitreous chinawater closet (Orissa pattern)of size 580mm x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe and provision of concrete bedding etc complete all as specified and as directed. |
| 75 | Supply and fix in repairs Chromium Plated brass tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 76 | Supply and fix in repairs cabinet mirror, moulding theremoset litron formaldehyde of plientil formaldehyde with chromium plated frame openable type and mirror colour white complete all as specified and as directed.Make : Prayg / Commander |
| 77 | Supply and fixed in repairs corner shelves glass fitted with Chromium Plated brackets and screws complete all as specified and as directed. |
| 78 | Supply and fix in repairs looking mirror of size 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood with PVC frame all round fixed with chromium plated brass screws complete all as specified and as directed. |
| 79 | Supply and fix in repairs nipple PTMT suitable for 20mm dia bore pipe in HDPE water tank (Minimum weight 15mm-38gms / 20mm-45 gms / 25mm-65gms) complete all as specified and as directed. |
| 80 | Supply and fix in repairs extension nipple PTMTsuitable for 15mm dia bore pipe in HDPE water tank (Minimum weight 15mm-18gms) complete all as specified and as directed. |
| 81 | Dismantling of floor or wall tiling including cement mortar bedding and disposing of debris outside MD land complete all as specified and as directed. |
| 82 | Material and labour for glazed ceramic coloured tiles 300mm x 200mm x 7mm / 450mm x 300mm x 7mm on vertical surfaces such as skirting / dados over and including rendering 10mm thick in CM 1:3 as in backing coat for fixing tiles complete all as specified and as directed. |
| 83 | Material and labour for non-skid ceramic tiles coloured7mm to 8mm thick as in floors, area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 84 | Material and labour forgranite 20mm thickof any type work (table rubbed and polished) as in cooking platforms and like, in cement mortar (1:4)including pointing in white cement 1:2, using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including 15mm thick screed bed in CM 1:4 set and jointed complete all as specified and as directed. |
| 85 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 86 | Material and labour for vitrified ceramiccolouredtiles light shade 10mm thick (square / rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thickCM 1:6 screed bed complete all as specified and as directed. |
| 87 | All same as per item No 86 above but as in skirting over and including 10mm thick rendering on brick work or concrete surface as in backing coat of cement mortar 1:4 complete all as specified and as directed. |
| 88 | Material and labour for chequered cement concrete tiles of size 25cm x 25cm x 25mm thick set, jointed and pointed in neat cement slurry with mixture of grey and white cement over and including screed bed 15mm thick in CM 1:6 complete all as specified and as directed. |
| 89 | Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including screed bed 15mm thick in CM 1:6 complete all as specified and as directed. |
| 90 | Demolition of PCC (unreinforced) in ground floors and pavings not exc 15cm thickness including removal of debries upto a distance of 500 meter from the building complete all as specified and as directed by Engineer-in-Charge. |
| 91 | Material and labour for 75mm thick cement concrete type C2, 1:3:6 using 40mm graded aggregate as in path, hard standing, plinth protection etc and finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 92 | Material and labour for applying silicon sealant in the gaps of windows in repairs complete all as specified and as directed by Engineer-in- Charge. |
| 93 | Material and labour in repairs for fixing rubber beading for aluminium windows complete all as specified and as directed by Engineer-in- Charge. |
| 94 | Material and labour in repairs external teak wood lipping 6mm thick, fixed with particle boardcomplete all as specified and as directed by Engineer-in-Charge. |
| 95 | Cleaning accessable or non accessable roofincluding cleaning theRCC roof with wire brushes, removal of tree root, caked mud etcsweeping with brooming and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc andremoval of debris fromthe site premises as directed by Engineer-in-Charge complete all as specified and as directed. |
| 96 | Material and labour for double action floor spring hydraulically regulated made up of minimum1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified and as directed. |
| 97 | Supply and fixin repairs sensors only for automatic touchless ceramic urinal sensor / sensor flusher of approved makecomplete all as specified and as directed byEngineer-in-Charge. |
| 98 | Demolishing cement concrete in roof paddingetcmanually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-Charge. |
| 99 | Material and labour for Plain Cement Concrete type B1, 1:2:4, using 20mm graded aggregate as in roof padding, kerbs or mud stops, rounded or chamfered on edges kerbs etc complete all as specified and as directed. |
| 100 | Cleaning the roof surfacesby use of wire brush, water jet and grinding etc to remove all loose dust, fungus, oil, grease etc., all the existing membrane and primer and other foreign particles shall be removed by grinding and other mechanical means completely to reach base slab complete all as specified and as directed. |
| 101 | Material and labour for repairs to rain water outlets packing by checking the soundness of the existing treatment around the outlets and removing any loose mortar if any, followed by filling the gaps with high strength non-shrink cementitous grout Dr. Fixit Pidigrout 10M and sealing around the pipe outlets using single component highly elastomeric Dr. Fixit PU sealant complete all as specified and as directed. |
| 102 | Material and labour for cut open the cracks in V-groove manner up to 5mm to10mm wide by mechanical cutter, clean the groove with air blower to remove dust, dirt etc., fill the cracks with Dr. Fixit PU sealant after necessary cleaning, post filling apply one coat of polyurethane coating over the sealant by sandwiching 45 gsm fiber mesh between sealant and PU coating, the width of PU coating shall be 100mm, applied all along the length of cracks complete all as specified and as directed. |
| 103 | Material and labour for priming by providing, mixing and applying one coat of efflorescence resistant penetrating primer, Dr. Fixit Primer seal primer at a rate of7.0 to 8.0 sq.mt / liter in the SSD condition, allow the primer to dry for 4 hrs, prior to application of Dr. Fixit Roof seal Ultra topcoat waterproof coating systems complete all as specified and as directed. |
| 104 | Material and labour for providing and applying single component, GRIHA certified, water based eco-friendly high performance UV resistant elastomeric hybrid polyurethane Coating, Dr. Fixit Roof seal Ultra without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat in 1st coat until all surface is covered. Lay a 45 GSM Fibre glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition. Allow the first coat to dry for approximately 4-6 hours before applying the 2nd coat at 90° to the first coat, ensure there are no pinholes or air bubbles on the membrane surface, apply second coat of Dr. Fixit Roof seal Ultra without dilution spreading at the rate of 0.70 litre / Sq.mt /Coat to achieve total dry film thickness of 850 to 1000 microns at forced coverage at the rate of 1.40 litre / Sq.mt in 2 coats, the coating shall be done on entire horizontal area, upstands,vertical parapet wall etc., this coating shall meet and exceed the ASTM D 6083 - 97a standard specification, attains a tensile strength of ≥ 4.00 N/mm2 with 45 GSM glass fibre mesh confirming to ASTM D 412; Elongation at break ≥300% and crack bridging ability up to 3 mm, Solar Reflectance Index as per ASTM E 1980 – 105, Water permeability @5 bar – Nil as per EN12390 - 8:2019. Air cures the coating for 7 days complete all as specified and as directed. |
| 105 | Material and labour for Cracks filling by opening non-structural hairline cracks in plaster surface up to 5mm width in “V” shape and fill with Dr. Fixit Crack-X Paste. Cracks more than 5mm and all separation gaps should be filled up with Dr. Fixit Crack-X Shrink free. Cracks more than 10 mm and all separation gaps should be filled up with Polymer modified mortar (PMM) mix with Dr. Fixit Pidicrete URP 10% by weight of cement in the ratio of 1:3 curing etc. as per standard methodology, all joints between CC members and masonry / pipe penetration shall be racked out at least 10 mm deep, the gap shall be sealed by (PMM) polymer modified mortar admix with Dr. Fixit Pidicrete URP 10 % by weight of cement in the ratio of 1:3.complete all as specified and as directed. |
| 106 | Material and labour for apply one coat of prime seal primer diluted with water in the ratio 2:1 spreading at the rate of 8.0 – 10.0 / Sq.mt / Litre in the SSD condition and allow it to penetrate for 3 to 4 hours. (only for fresh plaster surface) complete all as specified and as directed. |
| 107 | Material and labour for apply one coat of Dr. Fixit Raincoat Waterproof Coating without any dilution, maintain the spreading rate of 4.20 - 4.70 Sq.mt / litre / coat application to achieve about 100-120 microns DFT, apply second coat of Dr. Fixit Raincoat Select Top Coat with interval of 6 - 8 hours without any dilution spreading at rate of 6.0 - 6.5 Sq.mt / per litre / coat to achieve DFT of 60 – 70 microns, the material having following technical properties: Attains hairline crack bridging up to 2 mm, Elongation of >100 % as per ASTMD 412; Tensile strength 2.50 Mpa per ASTM D 412, Passes Water Resistance as per SS500 standard, Complies to anti carbonation test as per EN 1062 part 6. complete all as specified and as directed. |
| 108 | Material and labour for providing and fixing in true horizontal600 mm x 600mm false ceiling board manufactured by M/s. Armstrong World Industries complete all as specified and as directed. |
| 109 | Supply and fix in repairs swan neck pillar cock 15mm dia of Chromium Plated Brass type with casted spout without foam flow complete all as specified and as directed. |
| 110 | Supply and fix one piece EWC with soft close seat cover 660mm x 365mm x 765mmwithconcealed \"S\" or \"P\" trapwhite including connection to drain or out going pipe and flushing pipe, anti syphonage pipe etc complete all as specified and as directed. MAKE :- Jaquar / Jhonson / Cera |
| 111 | Supply and fix 8 feet long, 4 pipes, pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of delrin material with rope guide mounted on channel pair of length 24 inches (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit, rope will be HDPE double core of 4mm dia fixed to ceiling and minimum weight of one pipe shall not be less than 0.20Kg/mtr, minimum weight of rope shall not be less than 7700 Gms/unit ( for 04 Pipes) complete all as specified and as directed.MAKE :- Easy dry systems or Equivalent |
| 112 | Taking down chowkat or frames with shutter (without taking off shutter fromthe frames) area not exceeding 1.5 sqm each.complete all as specified and as directed. |
| 113 | Supply and fixsolidPVC door frame ofsize 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawings fixed with drilling and min 100mm screw with rawl plug complete all as specified and as directed. |
| 114 | Material and labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 115 | Supply and fix solid PVC wall lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed. |
| 116 | Supply and fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed. |
| 117 | Supply and fix aluminium extruded section body section door closer hydraulically regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
| 118 | Material and labourfor SMP Magma factory made 18mm thick 100% Solid WPC ( wood polymer composite) laminated / plain boards as in cup board shutters. boards shall beof required size comprising of virgin PVC resin of K Value 57-60 (suspension grade), calcium carbonate and natural fibers (woodpowders / rich husk / wheat husk) and non- toxic additives, made from extrusion process foam sheet single extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holdingcapacity ( Screw withdrawal strength of 2000 N (face) & 1100N (Edge) minimum compressive strength of 50 N/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread of frame of class A category with property of being termite/ Borer free, water/ moisture proof and fire resistance. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing with headed counter sunk ss screws complete all as specified and as directed. |
| 119 | Supply and fix in repairs syphon kit as required for low level flushing cistern complete all as specified and as directed. |
| 120 | Material and labour for apply two coats of bitumen based aluminium paint on roof complete all as specified and as directed. |
| 121 | Material and labour for PVC Edge band tape of approved brand and colour as specified by Engineer-in- Charge. |
| 122 | Material and labour for providing and carry out expansion joint treatment after proper surface preparation to remove loose mortars, dust, foreign particles from joints, fixing of tightly packed closed cell polyethylene based back up rod or filler board to ensure no gaps or voids exists, mask face edge of the joint using masking tape for neat finish, mixing of Dr. Fixit Tape Adhesive – Two part Epoxy Adhesive using slow speed drill till get homogeneous mix, apply it to prepared joint 1-2mm thick with notched trowel or putty blade, tooled to a smooth finish and finally fixing of Dr. Fixit Seal Tape– Flexible expansion joint membrane available in 1mm thickness and 150mm wide exhibiting superior mechanical properties like,Elongation >500%, Tensile Strength >12N/mm2,Tear Strength >200N above joint followed by another layer of epoxy adhesives Dr. Fixit Tape Adhesive as complete as per manufacturer’s specification, for joint over end laps, the overlaps surfaces must be clean, wiped and lapped with 100mm overlap, after application, the system should be allowed to cure for 7 days complete as specified by Engineer-in- Charge. |
| 123 | Material and labour for protecting the expansion joint system with Aluminium sheet of 1mm thick in a U shape fashion or as per the design or site condition, extending the same on both side horizontal section and vertical section, with riveting one side only as per the manufacturer instruction and as specified by Engineer-in- Charge. |
