|
| 1 | tem No. 1:- Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material |
| 2 | Item No. 2:-Providing, laying, spreading and compactinggraded stone aggregate to wet mix macadum specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with paver in sub - base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density . Laying by grader paver |
| 3 | Item No. 3 :Proving and laying dense bituminous macadam using crushed aggregates of grading I, premixed with bituminous binder VG-40 Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 50/75 mm compacted thickness .USING 80 TPH Batch mix type hot mix plant without SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and V-Sat attachment with Stone Dust filler. Including tack coat @ 0.30 kg/Sqm) |
| 4 | Item No. 4:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.40 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compactionfor 30/40 mm compacted thickness with VG-30 Bitumen,Excluding prime / tack coat. For Bitumen VG-30 bulk -- USING 80 TPH Batch mix type hot mix plant without SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and V-Sat attachment with Stone Dust filler(Using 80 TPH Batch mix type hot mix plant Including tack coat @ 0.25 kg/Sqm) |
| 5 | tem No. 5 ; -Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes complete . |
| 6 | Item No. 6:-SupplyingSpreading and Compacting hard murumspreading in uniforms layers on a prepared surface andCompacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete. |
| 7 | Item No. 7 :- Excavation for catch sidewater gutter in all sorts of soil to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sort of soil |
| 8 | Item No. 8 ; - Providing and erecting a \"W\" Metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70cm above road/ground level, fixed on ISMC series channel vertical post 150 x 75 x 5mm spaced 2m centre to centre 1.8 m high , 1.1 m below ground / road level, all steel parts and fitments to be galvanised by hot dip process all fittings to confirm to IS:1367 and IS:1364 , metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5mm , 330 mm long complete as per clause 810 . |
| 9 | Item No. 9 :- Providing and fixing R.C.C. 1:2:4200 m.stone of size (15 X 10X 65 cm ) as per I.R.C. design (IRC 26-1967) including cost of reinforcement @ 100 kg / cum), painting, numbering, fixing in standard size (35 X 30 X 40 cm ) C.C. 1:4:8block etc complete. |
| 10 | Item No. 10:-Providing and fixing Reinforced cement concrete 1:2:4 ordinary Kilometre stones on NH including painting numbering etc. complete as per IRC Design for highway km stones and fixing in standard size CC 1:4:8 block complete . |
| 11 | Item No. 11 :- Providing and fixing Reinforced cement concrete 5th Kilometre stones on NH including painting numbering etc. complete as per IRC Design for highway km stones and fixing in standard size CC 1:4:8 block complete . |
| 12 | em No. 12 :-Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the same to suitable locations etc. complete |
| 13 | tem No. 13:-Cutting of branche of trees and shrubs from the roadway or within R.O.W including disposal of wood and leaves to suitable location etc. complete |
