|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm Offices:-Area=4X4.7X3.3=62.04 SqmMI Room:-Area= 4.69X2.76=12.94Total= 74.98 Sqm |
| 2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of the Tile 600X600 MM |
| 3 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :Thickness above 10 mm up to 25 mmMI Room |
| 4 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated e layer particle board or graded wood particle board IS:12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge |
| 5 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. 65 mm |
| 6 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. |
| 7 | Providing and fixing chromium plated brass handles with necessaryscrews etc. complete 125 mm |
| 8 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessarycomplete 20 mm dia |
| 9 | Providing and installation18mm ply with 1mm thick approved laminate and 2mm thick matching PVC EDGE BINDING at all edge. With both side laminated finish completefor Cupboard of office.Table 4\"X3\"X5 Nos =60Sft |
| 10 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area2.5 sq.meters and under, including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 Coarse sand) |
| 11 | Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete Two or more coats on new work with ist quality acrylic distemper.Area =965-300= 665 Sqm |
| 12 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 14 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade Old work (one or more coats) |
| 15 | Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. |
| 16 | Providing and Fixing of 3 seater Foldable Chair MS with Cusion Typed (wall Mounted) complete as per Engineering -in- Charge. |
| 17 | Providing and fixing ofpowder coated Aluminium frame with ACP board and 6 mm thick Glass complete as per directions of Engineer- in-charge. |
| 18 | Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 20 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below |
| 21 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm Area =1.42*2.1X2=6.00 Sqm |
| 22 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 mm each |
| 23 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150X10 mm |
| 24 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :00x58x1.90 mm each |
| 25 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm |
| 26 | Finishing walls with Acrylic Smooth exterior paint of required shade Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 27 | Providing and fixing electrical Concealed wiring with FRLS Cum flexible wires of approved brand, size and quality for 1 Ton 3 star invertor Split Air Conditioners (Make Voltas) |
| 28 | Providing and fixing 150mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc to suit shutter thickness complete. |
| 29 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 30 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 31 | Wiring for circuit/ sub main wiring along earth wire with the 2x2.5 sq mm+1x2.5 sq mm earth wire of FRPVC insulated copper conductor, single core cable in casing capping as required. |
| 32 | Wiring for circuit/ sub main wiring along earth wire with the 2x4 sq mm+1x4 sq mm earth wire of FRPVC insulated copper conductor, single core cable in casing capping as required. |
| 33 | Supplying and fixing following modules switch/ socket on the existing modules plate & switch box including connections but excluding modules plate etc as required. (a) 15/16ampswitch |
| 34 | Supply and fixing of–ditto- but(b) 5 pin 5/6 amp socket outlet |
| 35 | Supply and fixing of–ditto- but (c) 5 pin15/ 16amp socket outlet |
| 36 | Supply and fixing of–ditto- but (d) 5/6 amps switch |
| 37 | Supplying and fixing two modulestepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 38 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 39 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required.(a) 1 or 2 Module (75mmX75mm) |
| 40 | Supply and fixing of–ditto- but(b) 3 Module (100mmX75mm) |
| 41 | Supply and fixing of–ditto- but(c) 4 Module (125mmX75mm) |
| 42 | Supply and fixing of–ditto- but(d) 6 Module (200mmX75mm) |
| 43 | Supply and fixing of–ditto- but(e) 8 Module (125mmX125mm) |
| 44 | Supply and fixing of–ditto- but(f) 12 Module (200mmX150mm) |
| 45 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.(a) 1 or 2 Module |
| 46 | Supply and fixing of–ditto- but(b) 3 Module |
| 47 | Supply and fixing of–ditto- but(a) 4 Module |
| 48 | Supply and fixing of–ditto- but(b) 6 Module |
| 49 | Supply and fixing of–ditto- but(c) 8 Module |
| 50 | Supply and fixing of–ditto- but(d) 12 Module |
| 51 | Supply and fixing of batten/angle holder including connection etc as required. |
| 52 | Supply and fixing of exhaust fan, Make-Phillips/Havells/Bajaj/Standard or equivalent 300 mm sweep heavy duty 900 RPM. |
| 53 | Supply and fixing of fancy wall light 9 Watt, warm white of approved make |
| 54 | Supply of LED tube light fitting 36 Watt Make-Phillips/ Havells/Bajaj |
| 55 | Supply and fixing of ceiling fan 1200mm, Make-Phillips/Havells/Bajaj |
| 56 | Supply and fixing of 5 amps to 32 amps rating,240/415 volts, single pole and neutral in the existing MCB DB complete with connection, testing and commissioning etc as required. |
