|
| 1 | Excavationforfoundationinearth,soilofalltypes,sand,gravelandsoftmurum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthe buildingareaand stackingandspreadingasdirected,dewatering,preparingthebed forthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means. SSR 22-23 I.NO. 21.02 @ 207.00 Per Cum |
| 2 | Excavationforfoundationinearth,soilsofalltypes,sand,gravelandsoftmurum, includingremovingtheexcavatedmaterialuptoadistanceof50metresbeyondthe building area and stackingandspreadingasdirected,dewatering,preparingthebed forthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means. SSR 22-23 I.NO. 21.04 @ 258.00 Per Cum |
| 3 | Providingdry/trap/granite/quartzite/gneissrubblestonesoling15cmto20cm thick including hand packing and compacting etc. complete. SSR 22-23 I.NO. 21.38 @ 1382.00 Per Cum |
| 4 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved byEngineer inchargein layers of 15 cmto 20 cm including watering and compactionetc. complete. SSR 22-23 I.NO. 21.37 @ 599.00 Per Cum |
| 5 | Fillinginplinthandfloorswith approved excavatedmaterialin15cm.to20cm. Layers including watering and compacting etc. complete. SSR I.NO. 21.36 @ 120.00 Per Cum |
| 6 | Providing and laying Cast in situ/ReadyMix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steelcentering,formwork,laying/pumping,compacting,rougheningthemif special finish is to be provided,finishingifrequiredandcuringcomplete,withfully automatic micro processorbasedPLCwithSCADAenabledreversibleDrumType mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade). SSR 22-23 I.NO. 24.01 @ 5830.00 Per Cum |
| 7 | Providingandlayinginsitu/ReadyMix cementconcrete M-20 oftrap/granite /quartzite/ gneiss metalforR.C.C.work infoundationslikeraft,stripfoundations, grillageand footingsofR.C.C.columnsandsteelstanchions etc.includingbailing outwater, Steel centeringformwork,laying/pumpingcoverblocks,compactionand curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR 22-23 I.NO. 25.11 @ 7104.00 Per Cum |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to beprovidedandcuringetc.complete.(Excludingreinforcementandstructural steel).withfully automaticmicroprocessorbasedPLCwithSCADA enabledreversible DrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfine aggregate (Crushed sand VSI Grade). SSR 22-23 I.NO. 25.31 @ 13783.00 Per Cum |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/gneissmetal forR.C.C.beamsandlintelsasperdetaileddesignsand drawings or asdirectedincludingsteelcentering,formwork,coverblocks, laying/pumping,compactionand roughening the surface if special finish is to be providedandcuringetc. complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversible DrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfine aggregate (Crushed sand VSI Grade). SSR 22-23 I.NO. 25.5 @ 12269.00 Per Cum |
| 10 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/gneissmetal forR.C.C.chajjaasperdetaileddesignanddrawingsincluding steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete.Withfineaggregate (Crushed sand VSI Grade). SSR 22-23 I.NO. 26.05 @ 13932.00 Per Cum |
| 11 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters forR.C.C.pile caps,footings,foundations,slabs,beams columns,canopies, staircase, newels,chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR 22-23 I.NO. 26.33 @ 89703.00 Per Mt |
| 12 | Providing and fixing in position HCRM / CRS (CorrosionResistant Steel) bar reinforcement ofvariousdiametersforR.C.C.pilecaps,footings,foundations,slabs, beams columns,canopies, staircase, newels, chajjas, lintels pardis, copings, fins, archesetc.asperdetailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.SSR 22-23 I.NO. 26.34 @ 94136.00 Per Mt |
| 13 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksin cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete. SSR 22-23 I.NO. 27.03 @ 7514.00 Per Cum |
| 14 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksin cementmortar 1:6 in superstructure including striking joints, raking out joints, wateringand scaffolding etc. Complete.SSR 22-23 I.NO. 27.05 @ 7994.00 Per Cum |
| 15 | Providing and fixing self supporting steel roofing systemfor a Godown or alike made up ofstructuralgradesteelsheetof912millimeterwidth(tolerance+/-2millimeter), moulded at site using mechanical press dies to the desired curve and shape to form 605 millimeter wide interlocking panels . The interlocking panels shall be pressed to close the seam forming water tight joints for a span of 15.30 meter having arch rise as 3.06 meter, archlength17.75meter.Thebasematerialmadeupofimported galvalumesteel complying to ASTM A792having base metal thickness of 0.80 millimeter ( tolerace + / - 0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster , top coat 25 micron and bottom coat 12 micron as per approved colour , including fixing hangers , clamps etc.as may be necessary of Proflex standard, including fixing sky light of 2 millimeter thick polycarbonate sheet of size 2\" x 7\" and turbo ventilator of 24\"\" diameter to be installed at every 30 feetalong thelength ofroof includingfinishing, testingand cleaning etc. complete. SSR 22-23 I.NO. 38.41 @ 2264 Per Sqm |
| 16 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.)for roofing without wind tiles including fastening with galvanised iron screws andbolts,leadandbitumenwashersasperdrawingetc.complete.(Weightof5.5 Kilogram/sq.m.). SSR I.NO. 38.04 @ 870.00 Per Sqm |
| 17 | Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:4 withoutneeru finish to concrete or brick surfaces, in all positionsincluding scaffolding and curing etc. complete. SSR 22-23 I.NO. 32.04 @ 278.00 Per Sqm |
| 18 | Providinginternalcementplaster20mmthickin Singlecoatsincementmortar1:4 without neerufinish,toconcrete,bricksurface,inallpositionsincluding scaffoldingandcuring etc.complete. SSR 22-23 I.NO. 32.07 @ 382.00 Per Sqm |
| 19 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing,gussetplatesetc.asperdetaileddesignsanddrawingsoras directed including cutting,fabricating, hoisting,erecting fixingin position, Making riveted/ bolted/welded connectionandone coat of anticorrosive paint andover it 2 coats of oil painting approved quality and shade etc. complete. SSR 22-23 I.NO. 23.04 @ 119459.00 Per Mt |
| 20 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre asperdrawing including fixtures,necessarywelding andpainting with one coatsof anticorrosive paint and two coats of oil painting complete. SSR 22-23 I.NO. 40.01 @ 2097.00 Per Sqm |
| 21 | Providing and applying washable oil-bound distemper of approvedcolour andshade to oldand new surfacesintwocoatsincludingscaffolding,preparingthesurfaces. (excluding the primer coat.) etc. complete. SSR 22-23 I.NO. 36.11 @ 48.00 Per Sqm |
| 22 | Providingandapplyingtwocoatsoftexturedsyntheticpaintofapprovedshadeand quality andonecoatofprimerbeforeapplyingtexturedpaintincludingscaffolding ifnecessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. SSR 22-23 I.NO. 35.24 @ 163.00 pER sQM |
| 23 | Providing and applying two coats of water proof cement paint of approved manufacture andofapprovedcolourtotheplasteredsurfacesincludingscaffoldingifnecessary, cleaning and preparing the surface, watering for two days etc.complete. SSR I.NO. 35.13 @ 79.00 Per Sqm |
| 24 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fittedwith sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S.Bracketplate300x300x3.15mmminimumsizeandshapewithsquarebar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mmthicknessandofanysizeattopandsafetydevicesincludingmechanicalgear operation arrangement consisting of worm gear wheels and worms of high grade cast iron ormildsteelandonecoatofredleadprimeretc.complete.(I.S.62481979)(With mechanical gear). SSR 22-23 I.NO. 39.25 @ 5308.0 Per Sqm |
| 25 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fittedwith sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S.Bracketplate300x300x3.15mmminimumsizeandshapewithsquarebar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mmthicknessandofanysizeattopandsafetydevicesincludingmechanicalgear operation arrangement consisting of worm gear wheels and worms of high grade cast iron ormildsteelandonecoatofredleadprimeretc.complete.(I.S.62481979)(Without mechanical gear). SSR I.NO. 39.24 @ 4829.00 Per Sqm |
| 26 | Providing andfixing inposition(asper1868/1982)Aluminium sliding windowof three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window framebottomtrack section 92 x 31.75 x 1.30 mmat weight1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Runningmetre.Theshuttershouldbeof bearingbottom40x18x1.25mmat weight 0.417Kilogram/One Running Metre. Inter locking section 40x 18x 1.10mm atweight 0.469Kilogram/Running metre. andhandleandtopsection40x 18x1.25mm atweight 0.417Kilogram/Running metre. As per detailed drawings and as directed byEngineerincharge withallnecessary Aluminium sectionsfixturesandfasteningssuchasrollerbearingin nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thickplainglassandaluminiummosquitonetshutterwithstainlesssteeljailwith all required screws and nuts etc, complete. With colour Anodising without box. SSR 22-23 I.NO. 39.42 @ 5425.00 Per Sqm |
| 27 | Providing and fixing in position powder coated aluminium louvered windows / ventilator ofvarious sizes with powder coating as per detailed drawing and specifications including aluminiumframes80x38mmx1.22mmboxtype,5mmthicksheet glasslouvers,of approved quality etc. complete. SSR I.NO. 39.68 @ 3467.00 Per Sqm |
| 28 | Turbo Ventilator 24\": Providing wind operated tubo ventilator system of various sizes over the existing roof inclusing cutting CGI sheets, proper fixing in position to true line and level with all fixtures and fastenings incuding etc. complete. SSR 22-23 I.No. 42 on P.No. 529 @ 9702.00 Per No |
| 29 | Supplying and erecting mains with 3 x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW. Item No. 1-3-6, Page No. 5, PWD Electrical CSR 2022-23. |
| 30 | Supplying and erecting LED Panel Light (600mm X 600mm) Max. 30 having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. Item No. 2-1-7, Page No. 24, PWD Electrical CSR 2022-23. |
| 31 | Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW. Item No. 1-7-1, Page No. 11, PWD Electrical CSR 2022-23. |
| 32 | Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75 m) length respectively and total 8.0 m long with pole cap, base plate in provided foundation. (weight 101 kg) as per specification no. OH- PL/STP. Item No. 8-1-1, Page No. 146, PWD Electrical CSR 2022-23. |
| 33 | Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP. Item No. 9-1-1, Page No. 160, PWD Electrical CSR 2022-23. |
| 34 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP. Item No. 9-1-4, Page No. 160, PWD Electrical CSR 2022-23. |
| 35 | Supplying, erecting & marking DP-MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB. Item No. 5-3-6, Page No. 90, PWD Electrical CSR 2022-23. |
| 36 | Supplying, erecting & marking DP-MCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB. Item No. 5-3-7, Page No. 90, PWD Electrical CSR 2022-23. |
| 37 | Supplying and erecting GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. Item No. 6-1-6, Page No. 106, PWD Electrical CSR 2022-23. |
| 38 | Supplying and erecting marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete with compliance to IS 720:2010. Item No. 6-1-14, Page No. 107, PWD Electrical CSR 2022-23. |
| 39 | Wiring for plug on board with Switch socket surface/concealed type, copperwiring and earthing and with modular accessories as per specification No: WG PW/CW. Item No. 1-7-26, Page No. 13, PWD Electrical CSR 2022-23. |
| 40 | Supplying and erecting regular/ standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FG-FN/CF Item No. 2-10-2, Page No. 35, PWD Electrical CSR 2022-23. |
| 41 | Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board. Item No. 5-3-14, Page No. 90, PWD Electrical CSR 2022-23. |
| 42 | Supplying, installing, testing & commissioning portable type room air conditioner having ISEER minimum 3.33 suitable to operate on 250V, 50 Hz, A.C. supply minimum 1TR capacity complete with refrigerant R32/R410A at position with drain pipe arrangement with small bucket of size minimum 1 litre with necessary wheel base for movement.. Item No. 3-2-35, Page No. 46, PWD Electrical CSR 2022-23. |
| 43 | Supplying, installing, testing and commissioning of single phase, 230V, 50 Hz, 2500 VA digital pure sine wave inverter with backup time of ........ hrs. based on Insulated Gate Bipolar Transistor (IGBT) technology complete as per specification no. AP-INV. Item No. 3-6-4, Page No. 50, PWD Electrical CSR 2022-23. |
| 44 | Supplying and erecting 12V/200Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete. Item No. 3-8-6, Page No. 51, PWD Electrical CSR 2022-23. |
| 45 | Providing solingusing 80 mmsize trap metal in 15 cm. layer including filling voidswith Crushed sand/grit, ramming, watering etc. complete. SSR 22-23 I.NO. 21.4 @ 1454.00 Per Cum |
| 46 | Supplyinghardmurum/kankarattheroadsite,includingconveyingandstacking complete. SSR 22-23 I.NO. 2.29a @ 435.00 Per Cum |
| 47 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete. SSR 22-23 I.NO. 2.30 @ 79.00 Per Cum |
| 48 | Compactingthehardmurumsidewidthsincludinglayinginlayersoneachsidewith vibratory roller including artificial watering etc. complete. SSR 22-23 I.NO. 2.31 @ 21.00 Per Sqm |
| 49 | Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints withbitumenetc.complete.(withfullyautomaticmicroprocessorbasedPLCwith SCADA enabledconcretebatchmixplant /pan mixerwith fineagreegates ofrequired specifications ( VSI sand finely washed etc ) SSR 22-23 I.NO. 6538.00 Per Cum |
| 50 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shadepaintcomplete, onM.S.angle ofsize 35x 35x 3mm framewith properly cross braced M.S. angles of size35mmx35mmx3mm duly painted includingTwo M.S.angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and whitebandsof25cmwidthincludingallfixturesetc.andfixingtheboardsin1:4:8 concreteblockofsize60cmx60cmx75cmincluding,excavation,refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge. SSR 22-23 I.NO. 6.36 @ 9963.00 Per No |
| 51 | Sand: Sand Fineness Modulus, Silt ContentDSR I.NO 10 P.NO. 584 @ 1380.00 Per Test |
| 52 | TMT Steel: Upto 16mm Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress. DSR I.NO 72 P.NO. 586 @ 1275.00 Per Test |
| 53 | Murum: Atterberg Limits; Liquid Limit & Plastic Limit TestingDSR I.NO 30 P.NO. 585 @ 1170.00 Per Test |
| 54 | Truss Steel Anti Corrosive Test: Resistance to applied Voltage. ( 1 Hr. Test ) (Set of 2 Bars) DSR I.NO 66 P.NO. 586 @ 1115.00 Per Test |
| 55 | Concrete: Compressive Strength OF C.C. Cube(Set of 3 cubes). DSR I.NO 19 P.NO. 426 @ 690.00 Per Test |
| 56 | Basic Test of Cement: Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness. SSR I.NO. 1 P.NO. 426 @ 3770.00 Per Test |
| 57 | BASIC TEST OF AGGREGATE.Water Absorption, Specific Gravity,Impact Value, Crushing Value. SSR I.NO. 2 P.NO. 426 @ 2600.00 Per Test |
| 58 | BRICKSWater Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). SSR I.NO. 13 P.NO. 426 @ 2175.00 Per Test |
| 59 | Qty of Material utilised for Royelty For Sand |
| 60 | Qty of Material utilised for Royelty For Without Sand |
| 61 | Management Strategies and Implementation Plan (MSIP) to manage theEnvironmental,Social,HealthandSafety(ESHS)risksandESHSCode of Conduct |
