|
| 1 | Inlet Bracket CI |
| 2 | Strainer |
| 3 | Impeller |
| 4 | Pump Bearing Bush |
| 5 | Top Bowl |
| 6 | O’ Ring Nitrile Rubber |
| 7 | SS Sleeve |
| 8 | Cable Guard |
| 9 | Lock Nut |
| 10 | Pump Shaft |
| 11 | Diffuser Housing |
| 12 | Pump Bearing Housing |
| 13 | Diffuser Bush |
| 14 | Gun Metal Intermediate Diffuser |
| 15 | CSK Screw |
| 16 | NRV Rubber Sheet |
| 17 | Intel Seal Ring |
| 18 | Diaphram Cap |
| 19 | Threst Bearing Segment Holder |
| 20 | Threst Bearing Segment |
| 21 | Counter Threst Bearing Ring |
| 22 | Bottom Bearing Housing |
| 23 | Top Bearing Housing |
| 24 | Threst Bearing Plate |
| 25 | Rewinding Charge with DC wire upto 2 HP (115mm) pumpset |
| 26 | Rewinding Charge with DC wire upto 3 HP (115mm) pumpset |
| 27 | Rewinding Charge with DC wire upto 5 HP (115mm) pumpset |
| 28 | Rewinding ChargewithDC wire upto 5 HP (150mm) pumpset |
| 29 | Rewinding Charge with DC wire upto7.5 HP (150mm) pumpset |
| 30 | Rewinding Charge with DC wire upto 10 HP (150mm) pumpset |
| 31 | Rewinding Charge with Dc wire of 20 HP Open well submersible pump set |
| 32 | Rewinding Charge with Dc wire of 25 HP Open well submersible pump set |
| 33 | V-12 Bearing Set |
| 34 | 38x55x80 Gun Metal Bush |
| 35 | Pump Casing Bush |
| 36 | Casing Sleeve |
| 37 | Gun Metal Impeller |
| 38 | 45 mm Shaft Grinding Charge |
| 39 | Rewinding Charge with Dc wire of 40 HP Open well submersible pump set |
| 40 | V-15 Bearing Set |
| 41 | 0-30Amps Ammeter |
| 42 | 0-500V Volt meter |
| 43 | Bush Button |
| 44 | Indicator |
| 45 | 380-415 V No Volt Coil |
| 46 | 400-440V No Volt Coil |
| 47 | 200-240V No Volt Coil |
| 48 | 1ø Preventer |
| 49 | Dry run Auto Preventer |
| 50 | 1ø ; 2 HP ; 13-24Amps Over Load Relay |
| 51 | 1ø ; 1.5 HP ; 8-13.5Amps Over Load Relay |
| 52 | 1ø ; 1 HP ; 6-9Amps Over Load Relay |
| 53 | 3ø ; 5 HP ; 8-13Amps Over Load Relay |
| 54 | 3ø ; 7.5 HP ; 13-20Amps Over Load Relay |
| 55 | 1ø ; 16Amps 2Pole Contact Set |
| 56 | 3ø ; 20Amps 4Pole Contact Set |
| 57 | 3ø ; 25Amps 4Pole Contact Set |
| 58 | 3ø ; 40Amps 4Pole Contact Set |
| 59 | Star / Delta Delay Timer |
| 60 | Add on Block |
| 61 | Grease |
| 62 | DC Wire |
| 63 | Valganising Rubber |
| 64 | Labour Charge forPannel Board Service. Upto 3 HP |
| 65 | b. 3 HP to 7.5 HP |
| 66 | c. Above 7.5 HP to 20 HP |
| 67 | Dismantling and assembling charges of pumpset |
| 68 | Labour charge for single phase service with proper wiring and running condition |
| 69 | Labour charge for Three phase service with proper wiring and running condition |
| 70 | Erection Charge for Removal of Borewell Sub and Refitted after the repair attended with proper wiring and running condition a. Upto 3 HP |
| 71 | b. Above 3 HP to 7.5 HP |
| 72 | c. Beyond 7.5 HP upto 20 HP |
| 73 | GST 18% |
