|
| 1 | PART-A (CIVIL) |
| 2 | Earth work in excavation of foundation in hard soilwith all leads and lifts including dressing the sides and levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P,royalty etc. complete and as directed by the Engineer-in-charge. |
| 3 | Filling in foundation & plinth with sand in 22.5cm(9\") thick layers including watering and ramming with all cost conveyance royalty, taxes of the materials and labour with T&P required for the work etc. complete or as directed by the Engineer-in-charge. |
| 4 | Plain Cement concrete (1:3:6) with 4cm size C.B, h.g metalof approved quality and from approved quary including hoisting,lowering,and laying in layers to 10cm(4\") thick to required level, ramming,watering including all cost & conveyance of all materials and labour with T&P required for the work with all taxes and royalities complete in all respects and as directed by the EIC. |
| 5 | Fly ash bricks masonary in cement mortar (1:6) after immersing bricks for six hours in water before use in super structure using Fly Ash bricks of size (25 x 12 x 8 cm) having a crushing strength of not less than 75 Kg/Cm2 including splays cutting circular moulding chmfering and corbelling watering and curing etc complete including cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect or as directed by the Engineer-in-charge.(a)foundation |
| 6 | b)Above foundation |
| 7 | Fly ash bricks masonary in cement mortar (1:4) after immersing bricks for six hours in water before use in super structure using Fly Ash bricks of size (25 x 12 x 8 cm) having a crushing strength of not less than 75 Kg/Cm2 including splays cutting circular moulding chmfering and corbelling watering and curing etc complete including cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect or as directed by the Engineer-in-charge. |
| 8 | Reinforced Cement concrete work of M-20 grade in foundation, column, beam, slab using 20mm and down grade black hard granite (crusher broken) stone chips of approved quality and from approved quary including hoisting, lowering and laying in layers not exceeeding 15cm thick to the required level ,ramming,watering and curing etc. including all cost of material, labour, with T&P and taxes of materials etc. required for work and as per direction of EIC.((a)Columns Foundation)). |
| 9 | (B) Columns and beams |
| 10 | (C) Plinth bend |
| 11 | (D) Lintel, Window seal & Bed block |
| 12 | (E) Chajja |
| 13 | (F) Roof slab |
| 14 | (G) Staircase |
| 15 | (H) Fins |
| 16 | Supplying fitting, with Straightening,cutting, bending, cranking, hooking, welding or jointing (if required) the HYSD steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works and for providing cost, conveyance and taxes of M.S. rods or Tor steel including binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. completefor ground floor or as directed by the Engineer-in-charge. |
| 17 | 20 mm thick grading plaster ( 1:4 ) on roof slabincluding watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 18 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600 mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality etc complete including cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect or as directed by the Engineer-in-charge. |
| 19 | Fixing Vetrified tiles in dados skirting on 12 mm thick CP ( 1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles inclu rubbing and polishing etc complete including cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect or as directed by the Engineer-in-charge. |
| 20 | Fixing Antiskirting Ceremictiles in floors treads on 25 mm thick bed of cement mortar ( 1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including watering and curing with thecost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 21 | FixingAntiskirting Ceremic tiles in dados skirting on 12 mm thick CP ( 1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles inclu rubbing and polishing etc complete including watering and curing with thecost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 22 | Fixing Kota tiles in floors treads on 25 mm thick bed of cement mortar ( 1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of Kota tiles. etc complet including watering and curing with thecost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 23 | FixingKota tiles in dados skirting on 12 mm thick CP ( 1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles inclu rubbing and polishing etc complet including watering and curing with thecost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 24 | 12mmthick cement plaster (1:6) over Brick / stone massonary finished smooth including watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 25 | 16mmthick cement plaster (1:6) over Brick / stone massonary finished smooth including watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 26 | 20mmthick cement plaster (1:6) over Brick / stone massonary finished smooth including watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 27 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtureswith cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 28 | Providing, fitting and fixing of F.R.P. doors with frame of approved design and colourincluding labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 29 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. including cost of materials all taxes labour t&P etc complete as per direction of EIC. |
| 30 | Supplying iron shutter M.S. panalled door single leaf withM.S. frame and M.S. panalled window double leaf with M.S. frame and grill etc complete including cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect or as directed by the Engineer-in-charge. |
| 31 | Fitting, fixing iron shutter M.S. panalled door withM.S. frame and M.S. panalled window with M.S. frame and grill in position etc including fixing in cement concrete CC (1:3:6) with 12mm to 20mm hard stone chips or in cement morter (1:3) including all cost of materials and as per the direction of the Engineer-in-charge. |
| 32 | Supplying fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of sixe 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in e rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour T&P etc required for the complete in all respect and as per the direction of the Engineer-in-charge. |
| 33 | Providing, fitting and fixing of false ceilling with aluminium anodised T Section No 3215 with 2\"-00\"\" center to center, L section No 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminium grid 2\"-0\" x 2\"-0\"\" suspended from ceiling etc complete including all cost of materials and as per the direction of the Engineer-in-charge. |
| 34 | Finishing wall surface of walls with Acrylic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging, charges with cost, conveyance, royalities and taxes of all materials and labour with T&P require for thework etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 35 | Priming 1 coat with any appproved Primer of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging, charges with cost, conveyance, royalities and taxes of all materials and labour with T&P require for thework etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 36 | Distempering two coats to the wall surface with any approved paint over a coat of chalk wash including cost of distemper etc. conveyance, royalities and taxes of all materials and labour with T&P require for thework etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 37 | Wall painting two coats with Acrylic Emulsion paint (weather seal coat) of approved shade on new work to give an even shade including cost, conveyance and taxes of all materials and labour with T&P required for the work etc complete in all respect in all floors or as directed by the Engineer-in-charge |
| 38 | Painting 2 (Two) coats with any approved enamel paint over a coat of priming to new wood workand iron work including cost of the primer and paint sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P required for the work etc complete in all respect in all floors or as directed by the Engineer-in-charge |
| 39 | (2nd Floor)- Flyash brick masonary in cement mortar(1:6) after immersing bricks for six hours in water before use in super structure using clamp burnt bricks of size (25 x 12 x 8 cm) having a crushing strength of not less than 50 Kg/Cm2 including splays cutting circular moulding chmfering and corbelling watering and curing etc complete including cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect or as directed by the Engineer-in-charge. |
| 40 | Reinforced Cement concrete work of M-20 grade in foundation, column, beam, slab using 20mm and down grade black hard granite (crusher broken) stone chips of approved quality and from approved quary including hoisting, lowering and laying in layers not exceeeding 15cm thick to the required level ,ramming,watering and curing etc. including all cost of material, labour, with T&P and taxes of materials etc. required for work and as per direction of EIC.(A) Columns and beams |
| 41 | (B) Window seal |
| 42 | (C) Chajja |
| 43 | (D) Roof slab |
| 44 | (E) Fins |
| 45 | Supplying fitting, with Straightening,cutting, bending, cranking, hooking, welding or jointing (if required) the HYSD steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works and for providing cost, conveyance and taxes of M.S. rods or Tor steel including binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. completefor ground floor or as directed by the Engineer-in-charge. |
| 46 | 20 mm thick grading plaster ( 1:4 ) on roof slabincluding watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 47 | 12mmthick cement plaster (1:6) over Brick / stone massonary finished smooth including watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 48 | 16mmthick cement plaster (1:6) over Brick / stone massonary finished smooth including watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 49 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. including cost of materials all taxes labour t&P etc complete as per direction of EIC. |
| 50 | Supplying iron shutter M.S. panalled door single leaf withM.S. frame and M.S. panalled window double leaf with M.S. frame and grill etc complete including cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect or as directed by the Engineer-in-charge. |
| 51 | Fitting, fixing iron shutter M.S. panalled door withM.S. frame and M.S. panalled window with M.S. frame and grill in position etc including fixing in cement concrete CC (1:3:6) with 12mm to 20mm hard stone chips or in cement morter (1:3) including all cost of materials and as per the direction of the Engineer-in-charge. |
| 52 | Finishing wall surface of walls with Acrylic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging, charges with cost, conveyance, royalities and taxes of all materials and labour with T&P require for thework etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 53 | Priming 1 coat with any appproved Primer of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging, charges with cost, conveyance, royalities and taxes of all materials and labour with T&P require for thework etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 54 | Distempering two coats to the wall surface with any approved paint over a coat of chalk wash including cost of distemper etc. conveyance, royalities and taxes of all materials and labour with T&P require for thework etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 55 | Wall painting two coats with Acrylic Emulsion paint (weather seal coat) of approved shade on new work to give an even shadeincluding cost of Cement paint etc. conveyance, royalities and taxes of all materials and labour with T&P require for thework etc. complete in all respect in all floors or as directed by the Engineer-in-charge |
| 56 | Painting 2 (Two) coats with any approved enamel paint over a coat of priming to new wood workand iron work including cost of the primer and paint sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respector as directed by the EIC. |
| 57 | PART- B (Electrical) |
| 58 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modularswitch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab) Group A (1.1.1) |
| 59 | -do- .... Group B (1.1.2) |
| 60 | -do- .... Group C (1.1.3) |
| 61 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.8 Modular box with base & cover (1.24.5) |
| 62 | 4 Modular box with base & cover (1.24.3) |
| 63 | 12 Modular box with base & cover (1.24.6) |
| 64 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 65 | S/F of 6 Modular GI boxin recess with suitable size of Modular base cover in front including providing and fixing2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required. |
| 66 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.27) |
| 67 | Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). -do- 2x1.5sqmm +1x1.5sqmm ( 1.8.1 ) |
| 68 | -do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 ) |
| 69 | -do- 2x4sqmm +1x1.5sqmm ( 1.8.3 ) |
| 70 | -do- 4x6sqmm +2x2.5sqmm ( 1.8.10 ) |
| 71 | S/Fof \"B\" series SP MCB of 5A to 32 Amp rating 240Volt \"B\" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1) |
| 72 | S/F of 63A TPN MCB |
| 73 | S/F of 63A DP MCB |
| 74 | S/F of following 16way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.8 |
| 75 | S/F of following 8 way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.6 |
| 76 | S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL)(1.29-1.28) |
| 77 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick and 25mm x 5mm copper tape (1.15Kg. Per Mtr.) 3.5Mtr. & 20mm G.I.pipe medium class 2.7 Mtr. ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc wih charcoal and salt as required. (3.5 + 3.6) |
| 78 | Providing and fixing 8 SWG copper wire in recess for loop earthing as required. (3.18) |
| 79 | Supply & Fixing of 1200mm (48\") A.C. ceiling fan(1 Star) without regulator incudig numbering of reputed mark with all accessories and connections(Make & Models :Usha-Striker Neo HS / Pollycab-Vital HS / Crompton-High Speed / Havells-Samrat ES / Anchor-Turbo speed star / Orient-Summer Breeze Pro / Great whiteALDOUS) |
| 80 | S/F of electric step ceiling fan regulater in existing switchboxincluding connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulatoras required.(1.38) |
| 81 | S/F of Fan hok S\"type madeof 16mm MS rodas per specificationn |
| 82 | S/F of extra down rod 20mmm dia(1.41)(20cm) |
| 83 | P/F of plain 16/0.2 mm Twin twisted flexible copper cable(1.31) |
| 84 | S/F of 45-48 wattLED street light fitting complete with all connection.\ including fixing of bracket and all accessories as per directionof Engineer-In-charge(Make: Havels / Phillps / Crompton / Polycab /HPL) |
| 85 | S/F of 18-25 wattLED Tube light fitting compoete with all connection.\ including fixing and all accessories as per directionof Engineer-In-charge(Make: Havels / Phillps / Crompton / Polycab /HPL) |
| 86 | S/F of18W LeD Squre (12\"×12\") LSDSMN-12W-WW with surface Panel rings (Havels/crompton/philips/panasonic) |
| 87 | Supply of instalation, Testing commissioning of 12 Watt. LED bulb |
| 88 | S/F of 15A socket on 2 modular board for A.C |
| 89 | S/F of 32A C series D.P. MCB for A.C (make: Legrand/Anchor/Havels/HPL) |
| 90 | S/F of 25AMoter Starter switch for A.C (Make: Havells / Anchor/Le-Grand) |
| 91 | wiring to sub main with 1*1.5 mm2 single core multi strand copper wire for inverter wiring (1x1.5mm) |
| 92 | Provn of 3 1/2x 150Sqmm Armoured Cable with all connections(30) |
| 93 | Laying of MV cable above120sqmm to 400 sqmm in surface(5.5.3) |
| 94 | Laying of MV cable above 120sqmm to 400 sqmm in ground (5.1.3) |
| 95 | Supplying and making end termination with brass compression gland and aluminum lugs for 150sq mm. 3½ Core cable |
| 96 | Supply & fixing of 250 A TPNPanel Board powder coated (40\" X32\" X 12\")1.250A 4P MCCB (36KA) (Make :L&T)-1 no., 2.250A Spreader Link-1no., 3.250A Copper Busbar with all Accessories-5Kg, 4.200A Changeover-1no.,5. 63A DP MCB-3 nos, 6. 32A DP MCB-3nos., 7.63A 4P MCB-3 nos.,8. Digital metering with CT & RYB indicator and danger board-1no., 9.Internal wiring with copper lugs, wire & other accessories-1no. |
| 97 | PART- C (P.H) |
| 98 | (P.H.)Earthwork in all kinds of soil in excavation of foundation trencheswithin 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. (a) Initial lift upto 1.5 mtr |
| 99 | (b)From 1.5 mtr to 3.0 mtr depth |
| 100 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. |
| 101 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 102 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 103 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 104 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 105 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 106 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 107 | Supplying all materials, labour, T&P and making M.S. Step Iron in 12mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded inC.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 108 | Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C.bafflewall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 109 | Supplying all materials, labour, T&P and providing 110mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded inP.C.C(1:1.5:3)using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 110 | Supplying all materials, labour T&Pand fixing Ceramic Tiles in floors on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per specificat. |
| 111 | Supplying all materials, labour T&Pand fixing porcelain glazed tilesin dados skirting, on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of Engineer-in-Charge. |
| 112 | Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge. |
| 113 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in cm (1:4) for takingGI / PVC pipes and making good the damagesetc all complete as per P.H specification and direction of the E.I.C. a) Cutting Hole (250 mm thick wall) |
| 114 | Cutting Grooves in wall or floor |
| 115 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Neycer/Cerra/ Parry ware/ Hindware) |
| 116 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrestetc all complete as per specification and direction of the E.I.C.European water closet with ‘P’ trap plain with seat cover |
| 117 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-550mmx400mm size wash hand basin . (Cerra/ Parry ware/ Hindware) |
| 118 | Fixing of Pedestrial for W.H.B |
| 119 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C. (JAGUAR)15mm dia CP long body bib cock |
| 120 | 15mm dia CP short body bib cock |
| 121 | 15mm dia CP Two way angle/Bib Cock |
| 122 | 15mm dia CP Health Fuccet |
| 123 | 15mm dia CP Angle Stop Cock |
| 124 | 15 mm dia CP Pillar Cock |
| 125 | 15mm dia CP concealed stop cock |
| 126 | a) Fixing of 20mmx450mm long CP towel rail |
| 127 | 25mm dia U-PVC Ball Valve[Metal Ball] |
| 128 | 32mm dia U-PVC Ball Valve[Metal Ball] |
| 129 | 15mm x 225mm long size CP shower arm |
| 130 | Fixing of Glass Mirror 600mmx450mm size B.E mirror (fixed type) |
| 131 | 450mmx125mm size plate Acrylic shelf |
| 132 | CPtowel ring |
| 133 | Fixing of C.P Soap Holder |
| 134 | Flat Back lipped wall urinal [Medium] 380x580x350 |
| 135 | Cost of 15mm dia urinal spreader |
| 136 | Cost of squatting urinal(600x355mm) |
| 137 | Fixing of Marble Partition in Urinal - 1.20 x 0.90 |
| 138 | Supplying all materials, labour, T&P and fitting and fixing U-PVCsoil waste ventilating pipes of and fittings of the following outside diameter of 4kg/cm2conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing etc all complete as per P.H specification and direction of the E.I.C.a) 110mm dia PVC SWR pipe |
| 139 | 110mm dia Plain bend |
| 140 | 110mm U-PVC door bend |
| 141 | 110mm U-PVC door Tee |
| 142 | 110mm dia cowl |
| 143 | 125mm dia CP grating |
| 144 | 110mm dia PVC P trap |
| 145 | 110mmPVC SWR plain Tee |
| 146 | 110mm diaPVC SWR offset |
| 147 | Supplying all materials, labour, T&P and providing and fixing to wall or ceilling and floor PVC pipes conforming to(Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testingetc all complete as per P.H specification and direction of the E.I.C. a) 20mm dia C-PVC pipe (Internal) |
| 148 | 25mm dia ASTM/PVC pipe (External) |
| 149 | 32mm dia ASTM/PVC pipe (external) |
| 150 | 32mm dia HDPE pipe |
| 151 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:1.5:3) mix using 12 mm size H.G chips, foundation concrete (1:3:6) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. (a).Inside size 250mmx250mm |
| 152 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes withcement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips,12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, paymentof royalty, taxes etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm |
| 153 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brickwalling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. Construction of Soak way Pit Construction of Brick Soak way Pit (1.20 m dia x 2.10m Deep) |
| 154 | Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approvedsolvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches andall round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. Laying of 100 mm dia S.W Pipe line Haunch top |
| 155 | Supplying all materials, labour, T&P and Fitting and Fixing of PVCwater storage tankincluding cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr aboveG.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 Ltr capacity Sintex tank (1st Floor) |
| 156 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 Ltr capacit(1st Floor) |
| 157 | SINKING OF PW -1 No.Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site conditionas per thedirection of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 200 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell) Drilling of 200mm dia bore- |
| 158 | Drilling of 150mmdia bore- |
| 159 | Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threadedincluding plugging tubewell to prevent entry of foreign materials from above.a) Lowering of 200mm dia PVC pipe (Labour) |
| 160 | Cost of 200mm dia PVC pipe (Sch-80-ISI mark) |
| 161 | Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge. |
| 162 | Installation of pump setSupply of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 1800-2200 ltr/hour and a head of 45-60 Mtr of reputed make like KSB/TEXMO and equivlant including all cost conveyance and taxes etc all complete as per the direction of E.I.C. |
| 163 | Supplying all labour, T&P and fitting abnd fixing of 1.00 HP single phasevertical submersible pump set with commissioning and testing etc all complete as per the direction of E.I.C. |
| 164 | Supplying all labour, T&P and fitting abnd fixing of ISI mark DOL starter of reputed make like BCH or equivalent for1.00 HP single phasesubmersible pump including all cost, conveyance of all taxesetc all complete as per the direction of E.I.C. |
| 165 | Supplying all labour, T&P and fitting abnd fixing of three core flat cable (1.5 mm2) of ISI mark of reputed make like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc all complete as peras per the direction of E.I.C. |
| 166 | Supplying all labour, T&P and fitting abnd fixing of plastic rope MS well cover, MS clamp, stainless steel short piece, bend and socket including all cost, taxes etc all complete as peras per the direction of E.I.C. |
| 167 | Supplying all labour, T&P and fitting abnd fixing of HDPE pipe and fitting with making connection to pump set including all cost, taxes etc all complete as peras per the direction of E.I.C. A) 32mm dia HDPE pipe |
| 168 | BORE PROTECTION Supplying all materials, labour, T&P for construction of bore protection wall with providing sand filling, cement concrete (1:4:8) with HG metal & KB brick work in cement mortar (1:6) of 1.15 height, 16mm thick CP over the brick work, RCC slab of size 0.95 x 0.95 x 0.75 mtr avairage length in C 1:1.5:3, centering shutering including watering curing conveyance of all materials to work site with all cost, taxes etc all complete as peras per the direction of E.I.C. |
