|
| 1 | SPECIFICATION OF LIFEBUOY##1- The inner diameter should not be less than 400 mm and the outer diameter should not be morethan 800 mm.#2- Mass of the lifebuoy should not be less than 2.5 Kg.#3- Man Overboard lifebuoy\"s mass should not be more than 4Kg.#4 diameter of the grab line should not be less than 9.5 mm. It\"s length should be at least 4 times the outer diameter of the body andit should be secured at 4 equidistant points.#5- Lifebuoy should be able to support not less than 14.5 KG of Iron in Fresh ter for24hours.#6- It should be constructed of inherent buoyant material.#7- It should not sustain burning or continue melting after being totallyenveloped in fire for 2 seconds.#8- It should be able to withstand a drop into water from height at which i stowed above waterline inlightest sea going condition or 30 metres whichever is greater without impairing its operating capability.#9- Equipment should be goodoperation condition.# |
| 2 | SPECIFICATION OF LIFE JACKET##1- Material :Polyester / Nylon Fabric Coated With Polyurethane#2- Usage/Application :Rescueoperation#3- Sleeves Type : Without Sleeves#4- Size :125 x 60 cm for Adults#5- Weight 1100 gm aprox.#6- Floatability :Yes#7-Material m Stitched With Nylon Fabric#8- Wear Type :Reflective#9- Colour : Orange#10- Is It Waterproof : Waterproof#11- Buoyancy:100 N#12- Equipment should be good operation condition.# |
| 3 | SPECIFICATION OF SAFETY BELT WITH BODY HARNESS##Safety belt with body harness as per ates IS: 3521, It should be insuch a manner, so that it can ensure safe fall protection to arrest falls and facilitate rescue and evacuation operation. It should have twhest attachment textile loops and a dorsal attachment #D# ring.#1- Design :One dorsal attachment D-ring for fall arrester#:Adjustableleg straps#:Adjustable chest straps#:Sit strap#:Made up of elastic webbing for more comfort & impact resistant#2- Webbing ial -Polyester#:Width - 44 + 1mm#:Breaking strength - 25KN(Aprox.)#3- Stitching thread :Material - High-tenacity polyester#4- MetalComponent : Aluminium#5- Test compliance :As per IS:3521#6- Weight :1Kg + 10Gm# |
| 4 | SPECIFICATION OF RUBBER HAND GLOVES#Electric Shock Proof Seamless Rubber Hand Gloves of Test Volts 33000 as per IS4770-1991 (Reaffirmed 2012)#1- Usage/Application : Electrical protection#2- Colour : off White#3- Pattern : Plain#4- Screen Size :Hospitals ger Type : Full Fingered#6- Cuff Length :11-15 Inches#7- Quality : Heavy duty#8- Weight Per Pair 250Grm. Aprox.#9-Equipment should be good operation condition.# |
| 5 | Chemical suit made from soft durable virgin grade PVC resistant to peeling, cracking , tearing, acid and alkali resistant with hood has areplaceable head gear and replaceable extra large visor air breather at back with flap, Complete suit in high frequen y welded withstrong vinyl unbreakable, rust proof welded buttonholes defy rough wear. Colour must be yellow, material should be Polyvinyl Chloride(PVC), size should be free size. Equipment should be good operation condition. |
| 6 | SPECIFICATION OF BRAIDED ROPE OF 16 MM SIZE FOR RESCUE PURPOSE##THE BRAIDED ROPE SHALL MEET THEFOLLOWING FEATURES.#I) DIAMETER - 16 MM#II) WEIGHT - 74 GMS PER METER#III) ELASTICITY - STATIC#IV)BREAKING STRENGTH - 31 KN#THE BRAIDED ROPE SHALL BE CE CERTI SHALL CONFORM TO EN-1891 |
| 7 | SPECIFICATION OF FIRE FIGHTING HELMET AS PER EN 16471:2014# Fire Fighting Helmet as per EN 16471:2014:- Theergonomic design makes it safe and comfortable, even over long periods of use.#1- Protection and Resistance :-#Highly resistant shellto shocks, ex re to elevated temperatures and chemical attack#2- Comfort and fit## Comfort headband covered with soft leather.Patented ratchet quick adjustment system, even with gloves on## 3-point chinstrap for safe fit. Adjustable in 5 steps, with automaticbuckles, xible chincup## Height-adjustable headband and net suspension#3- Material helmet shell## Advanced high temperaturepainted thermoplastic## Vented or unvented options#4- Material inner parts## Flame retardant polyamide blends and fibres#5-Headsize## Adjus ther headband 52-64 cm#6- Weight## Helmet (without accessories ): 680 g +/- 20g#7- colours#Red and white#8-Main requirements:## Shock absorption (top / lateral)## Penetration resistance## Lateral deformation resistance## Protection againsthigh speed par ame resistance## Thermal resistance (convection and radiant heat)## Effective retention system## Electricalproperties## Resistance to contact with liquid chemicals## Low temperature performance (-30 degrees# |
| 8 | SPECIFICATION OF GUMBOOT AS PER IS 5557:2004##Colour : Black and red#Sizes & approx. Weight : Size 8-1500Gram, Size 9# 1600Gram, Size10-1800Gram#Leg hight : 15Inch#Uppper : Rubberised soft and flexible PVC for comfortable walk#Outsole : It ismade up of oulded hard PVC for better grip. The outsole has good anti slip, anti penetration, heat resistant properties & is resistance tomild acid, alkalis oils. Able to with stand 150000 cycle flexing test.#Hardness : Upper=55+/-5, Sole=65+/-5#Lining : Sweat abso ntfabric lining#Suitable for : Firefighting and other# |
| 9 | Spade SET |
| 10 | Specification of Self-Contained Open Circuit Compressed Air Breathing Apparatus (Carbon Fibre Composite (CFK) Cylinder 6.8 lit x300 bar) Approved to EN 137: 2006 Type 2, CE0120##The SCBA (Carbon Fibre Composite (CFK) Cylinder 6.8 lit x 300 bar) is idealuse when working in environments where fibre and smoke, toxic gases or a lack of oxygen are present. It provides high level ofperformance, highly capable, with EN 137:2006 Type 2 Approval.#The SCBA (Carbon Fibre Composite (CFK) Cylinder 6.8 lit x 300ba can be used with EN 136: 1998 CL3 approved Protect 2000 P Full Face Mask.#Main Components:# Protect 2000 P-Plug in typefull-face mask approved to EN 136:1998, CL3# Lung Demand Valve# Pressure Reducer# High Pressure Gauge (0-350 bar) withwarning whistle Back Plate# Harness Assembly# Valved Cylinder#Full Face Mask#Protect 2000 Full face mask is of superior qualityEPDM, non-ageing chemical resistant rubber with sealing flaps, Neoprene five point harness & neck strap, Impact resistant wide viewreplaceable carbonate visor, speech diaphgragm, self-demisting facility, inhalation and Silicon exhalation valves, Special easy-to-clickPlug-in connector compatible with a Lung Demand valve.#Carrying System#The carrying system is ergonomically designed to followthe |
| 11 | Specification of Chemical protective Suit Size XL & XXL#1.It should be suitable for the transfer of hazardous substances or themeasurement of these substances in non -explosive atmospheres.#2.It should be fully encapsulating and gas tight.#3.it should ha lexibleand foldable two-layer visor which offers a natural field of vision.#4.It should have double flap zipper and hot air taped seams (bothinternal and external).#5. It should be easy to don and doff, and is should be designed to be use with personal tection equipment likeopen circuit breathing apparatus inside it and helmet.#6.It should be compatible for using with open circuit Breathing Apparatus Set forbreathing point of view.#7.It should include fixed gloves,(with laminate inner lining),integrat gas tight socks with boot flaps, integratedadjustable waist belt and Kevlar over # gloves for additional cut protection.#8.It should be made of Zytron 800 soft laminated materialwith self-life 10 years.#9.It should be comfortably fit to Body height of 1 m.#Approval:-#a.) NFA 1994:2007 -US requirements forprotective clothing for incidents involving warfare agents.#b.) EN 943-1:2002 European requirements for protective clothing forindustrial applications#c.) EN 943-2:2002 (ET) European requirements for |
