|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. In cement mortar |
| 3 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. |
| 5 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 6 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 8 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. With cement mortar 1:4 (1 cement : 4 fine sand). |
| 9 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 10 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks. |
| 11 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 12 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. ( where steel work will be provided by department ) |
| 13 | Dry cleaning of the sofa/chair seats by using 3M shampoo and stain remover chemicals etc. vaccuming, shampooingand drying complete. labour charges as per direction of Engineer in charge. |
| 14 | Providing and fixing 8mm thick frameless toughened glass with bevelling for table top etc. all complete as per direction of Engineer-in-charge |
| 15 | P/F C.P. brass Monoblock Basin Mixer of Jaquar make no. FLR-CHR-5167NB, taking out and refix overcounter washbasin with granite complete.as per direction of Engineer in charge. |
| 16 | Providing and fixingTowel Ring Square Jaquar Continental ACN-CHR-1121N make as per direction of Engineer-in-charge |
| 17 | Providing and fixing Bib Cock with Wall Flangeof 15 mm nominal bore Kubix Prime KUP-CHR-35037PM (Jaquar make) as per direction of Engineer in charge. |
| 18 | Providing and fixing of 30cm stainless steel grab bar of approved quality and make complete as per direction of Engineer. |
| 19 | P/F dual flush cistern syphon of Hindware make or approved quality complete as per direction of Engineer-in-charge |
| 20 | P/F solid plastic soft close seat cover for dual flush WC of approved make (Hindware make or approved as per direction of Engineer in charge. |
