|
| 1 | Foundation excavation in hard soil including levelling and dressing the bed and sides depositing muck within initial lead and lift etc. |
| 2 | Filling foundation and plinth with sand well watered and rammed including cost and conveyance and royality of sand etc. complete. |
| 3 | Cement concrete (1:4:8) using 4cm CBHG metal including cost,conveyance and royality of materials curing etc. complete |
| 4 | Cement concrete (1:2:4) using 12mm CBHG chips for R.C.C works including Hoisting and laying |
| 5 | Brick work with Flyash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in foundation and plinth |
| 6 | Brick work with Flyash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in superstructure in ground floor |
| 7 | Brick work with Flyash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4) in foundation and plinth |
| 8 | R.C.C Work inM20 grade with 20 mm and downgrade blackhard granite stone chips (crusher brocken) including hoisting and laying in layers. |
| 9 | column base and plinth beam |
| 10 | lintel beam |
| 11 | columns/beams |
| 12 | Chajja/SS |
| 13 | Roof Slab |
| 14 | Supplying,fitting & placing uncoated HYSD bar reinforcement as per drawing and technical specification including cost,conveyance and all taxes of steel/binding wire etc. in ground floor |
| 15 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work in GF |
| 16 | 12mmthickcementplaster(1:4)finishedsmoothto outside smooth surface of brick walls |
| 17 | 12 mm thick cement plaster in c.m (1:6) over RCC work and brick masonry in ground floor |
| 18 | 16 mm thick cement plaster in c.m(1:6) over brick or stone masonry in ground floor outside |
| 19 | 6 mm thick cement plaster in cm(1:4), finished smooth including closed deep chiping and slurry treatment per sqm in Ground floor |
| 20 | Priming 1-coat with any approved primer over wall surface including cost of primer in ground floor |
| 21 | Wall painting -2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint in ground floor |
| 22 | Finishing exterior walls with weather coat of approved shade two coats on new work to give an even shade including cost of paint in ground floor |
| 23 | Supplying, fitting and fixing of powder coated M.S. collapsible gate/Window grill/Ventilator etc made out of M.S. square bar / M.S. flats / M.S. angles as per approved drawing and design, cutting to required size and welding properly, finished smooth andsandpapering,includingcost,conveyance,taxesofall materials,requiredscrews,costofalllabour,T&Petc.as required for the work complete as per direction in all floors. |
| 24 | Cost of PVC/FRP panel type (single shutter) frame doors including cost, conveyance,excluding GST of all materials, labour and T&P etc. complete |
| 25 | Supplying, fitting, fixing up window (sliding type) made up of aluminium section 9778 as window frame section; No 4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement and all fittings including cost of materials, taxes labour, T&P complete |
| 26 | Cementpunningincludingwateringandcuringwithcost, conveyance, royalties, and excluding GST of all materials with alllabourandT&Prequiredfortheworkcompleteinall respect. |
| 27 | Fixing of vitrified tiles (60cm x 60cm Colour/ Printed series) in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles in ground floor. |
| 28 | Fixing of Vitrified tiles 60cmx60cm (Colour/ Printed series) series in dado, skirting and risers of steps on 12mm thick cement plaster in mortar (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles per sqm in ground floor |
| 29 | Supplying, fitting & fixing Ceramic Floor Tiles (30x30) cm in floors laid on 20mm thick CM (1:4) and filling joints with white cement of aproved quality including cost of all materials in GF |
| 30 | Fixing Ceramic Floor Tiles (30x20)cm in dado, skirting & risers of steps of 12 mm thick CP (1:3) joined wth neat cement slurry mixed with pigments to match th shades of the tiles including rubbing and polishing complete including cost of tiles in GF |
| 31 | Construction of soakpit with RCC precast rings of dia 0.90 m x 0.30 m height - 6 nos and one RCC cover slab at top including all cost of materials, labour and transportation etc. |
| 32 | Letter writing on front wall of the building for signboard purpose on a base of weather coat paint including all cost of paints materials & labour charges etc. |
| 33 | Recessed wiring to light point/Fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduct with 5Amp. 250V piano switch/ceiling rose, ISI marked, mounted on MS box having front bakelite cover of auiltable size, MS box with 1.5 Sqm mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connections as per direction of Engineer in Charge. (Make of wire- Finolex/L&T/Anchor/Havels/V Guard) |
| 34 | Group-A, short point |
| 35 | Group-B, medium point |
| 36 | Group-C, long point |
| 37 | Recessed wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia non metallic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard/Great White/HPL) |
| 38 | Supply & Fixing of 5/6 amp, 3-pin socket with switch on existing board. |
| 39 | Wiring of circuit/Recessed Sub-main wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor, ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit, 1.6 mm in recessed PVC conduit as required (Make of wire- Finolex/L&T/Anchor/Havells/V-Guard/Great White/Mescab/HPL) |
| 40 | 2 X 1.5 sq.mm + 1 x 1.5 sq.mm |
| 41 | 2 X 2.5 sq.mm +1 x 1.5 sq.mm |
| 42 | 2 X 4.0 sq.mm +1 x 1.5 sq.mm |
| 43 | S/F of 4 way single pole and neutral single/double door sheet Steel MCB distribution board |
| 44 | Single door 4 way |
| 45 | S/F of5 -32 amp rating, 240 volt \"B\" series MCB for lighting and other loads in the existing MCB distribution board, ISI marked, complete with connection, testing and commissioning etc. as requierd(make-HPL/ Havells/ Legrand /L&T/C&S) |
| 46 | 5 - 32 amp SP (single pole) MCB |
| 47 | S/F of32 amp DP switch (Make- Cona/Anchor) |
| 48 | Supply and fixing of 32 Amp ICDP mainswitch with MS Board |
| 49 | Supply and fitting ofComputer board |
| 50 | S/F of Ceiling fan, aluminium body, copper winding with accessories & connection without reglator (Make-Crompton/Havells/Usha/eqv.):-48\" (1200 mm) fan |
| 51 | S/F of eletronic step type regulator for ceiling fan in existing swich board including connections (Cona/Anchor/eqv. ) |
| 52 | S/F of Bakelite angle holder/batten holder in place of ceiling rose |
| 53 | S/F of 9 watt LED tubelight (Phillips/Crompton/Surya) |
| 54 | S/F of 9 watt LED bulbs (Phillips/Crompton/Surya) |
| 55 | Supply and fitting of 40W LED Street light fittings complete with all accessories (Phillips/Havels/Bajaj) |
| 56 | S/F of Earthing with G.I. earth pipe 3m long, 40 mm dia, ISI marked, including accessories and providing masonary enclosure with cover plate having loking arrangement and watering pipe etc. with charcoal and salt as required;- Standard Earthing as per Govt. specification |
| 57 | S/F of SWG No. 6/No. 8copper wire for earth continuity |
| 58 | Supplying all materials, labour, T & P for cutting holes in brick/stone masonry walls in all floors for taking GI/PVC pipes and fittings through & making good to the damages with CM(1:4) etc. all complete to pass through 125mm to 250 mm thick walls. |
| 59 | Supplying all labour T & P & materials & cutting grooves in pucca floors & walls veritically & horizontally to the required depth & width for fixing GI/PVC pipes & fittings,testing the pipe line against leakage & making good to damages etc. all complete. |
| 60 | Supplying all materials, labours, taxes and T&P etcfor fitting & fixing of U-PVC/Sch. PVC pipes (ORIPLAST/Equvalent make) of following dia to walls,ceiling and floorswith clamps/hooks & including making good to damages etc. all complete. |
| 61 | a)15 mm dia PVC (ASTM) pipe |
| 62 | b)20 mm dia PVC (ASTM) pipe |
| 63 | c)25 mm dia PVC (ASTM) pipe |
| 64 | Supplying all materials, labour, T & P in all floors for fitting & fixing of U-PVCfixturesof the following diameter including supply of required jointing materials etc. all complete |
| 65 | 25mmdia BALL VALVE |
| 66 | 25mmdia union |
| 67 | 25mm dia elbow |
| 68 | 25mm dia tee |
| 69 | 20mm dia union |
| 70 | 20mm dia elbow |
| 71 | (20x15)mm RS / FTA /MTA |
| 72 | Supplying all materials, labour, T & P forfitting and fixing of different types ofBrass/CP fittings accessories including supply ofjointing materials etc. all complete. |
| 73 | 15 mm dia heavy duty/ long body CP bib cock/pillar cock (Plaza/Amber/Equiv.) |
| 74 | 15 mm dia short body CP bib cock/pillar cock |
| 75 | 25 mm dia CP plain/angle/concealed stop cock |
| 76 | 110mm CP grating /floor jally |
| 77 | Supplying all materials, labour, T & P in all floors for laying in trenchs unplastisizedVC SW pipes confirming to IS:4985-2000 class-IV (4Kgf/Cm2) of following ominal boreincluding supply ofjointing materials and testing etc. all complete |
| 78 | b) 110mm dia PVCpipe |
| 79 | Supplying all materials, labour, T & P in all floors for fitting and fixing of PVC SW pipe fittings of the following diameter to walls with nails, bobbins,wooden plugs laying in trenches including jointing with rubber lubricant by non-heat appliction method, testing, earthwork in excavation and refilling of trenches etc-all complete |
| 80 | 110mm dia plain Tee |
| 81 | 110mm dia P -Trap /N - Trap |
| 82 | 110mm dia plain bend |
| 83 | 110mm dia cowl |
| 84 | 110/75/50 mm dia clamp |
| 85 | Supplying all materials, labour, T & P and fixing vitreousWater ClosetIndian type squatting pan/European type or commode duly embedded in C.C. (1:5:10) with P or S - trap including jointing of trap with pan in CM(1:1), cutting the floor and making good to the damages etc- all complete :-(580mm x 440mm)Indian pan |
| 86 | Supplying all materials, labour, T & P andfitting and fixing 10 liters capacity low level flushing cistern with a pair of cast iron/ M.S. brackets complete with fittings likePVC ball valve, float, unions and couplings for connection with Inlet, Outlet and Overflow pipes,including cutting holes and making goodto the damages etc.all complete |
| 87 | Supplying all materials, labour, T & P and fixing Wash basins with hole for pillar cock with cast iron or M.S. bracketsincluding cutting holes in walls and making good to the damages with supply of wooden plugs, screws and cement etc. and connections to waste pipe /pillar cock / supplymain line etc. all complete:- 450mmx300mm size wash basin |
| 88 | Supplying all materials, labour, T & P and fixing bevelled edge Mirror of superior glass mounted on 6mm thickplywood sheet and fixed to wooden plugs with CP screws and washers complete:- 600mmx450mm mirror |
| 89 | Supplying& fixing standard size CP towel rails/ towel rings complete with CP brass brackets fixed to wooden plugs with CP screws |
| 90 | a) Towel Rail |
| 91 | Supplying& fixing standard size CP Soap case/ Soap stand fixed to PVC plugs & screws etc. |
| 92 | Supplying all materials, labour, T & P and fixing SINTEX/Equivalant OH water storage tank including cutting holes through the tank and fixing PVC tubes, fittings, sockets etc including hoisting upto a height of 5 m. above ground level and placing in required position overRCC beam and R.C.C.slab along with provision of brick work in CM (1:6) for circular protection wall around the tank including centering, shutering, watering, conveyance of all materials etc- all complete. |
| 93 | a) 500 lit PVC tank |
| 94 | b) Staging |
