Tender For Construction Of Gym Room, Lawn Tennis Court, 2Nos Of Room And Store Room At Nalco Club, Damanjodi, Damanjodi-Odisha

TDR : 44406702

Tender Notice
BOQ

Expired

Damanjodi , Odisha

Tender Brief : Tender For Construction Of Gym Room, Lawn Tennis Court, 2Nos Of Room And Store Room At Nalco Club, Damanjodi

Document Fees
Refer document

EMD
₹ 60000.0 /-

Tender Value
Refer document

Submission Date
12-08-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Part- A, Construction of Gym room at NALCO Club
2	2.8.1.Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains, including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
3	2.25.Backfillingwithselectedexcavated earth or any other materialsaround the foundations, under floors,pavements or any other places in layers not exceeding 15 cm, watering and ramming, consolidating etc. complete.Lead upto 500m
4	2.28.1.Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of soil
5	4.1.3.Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
6	4.1.6.Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size)(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
7	5.1.2.Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
8	5.2.2.Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
9	5.9.1.Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns, etc as directed by Engineer-in-Charge.
10	5.9.3.Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform as directed by Engineer-in-Charge.
11	5.9.5.Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers as directed by Engineer-in-Charge.
12	5.9.6.Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts as directed by Engineer-in-Charge.
13	5.22.4.Bending/binding Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(REINFORCEMENT STEEL/TOR STEEL SHALL BE ISSUEDFREE OFCOST ATNALCO\"s STORE), Hot rolled deformed bars
14	6.1.2.Brick work with clay flyashbrickupto plinth levelin : Cement mortar 1:6 (1 cement : 6 coarse sand) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
15	6.3.1.Brick work with clay flyashbrickin superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
16	6.13.2.Half brick masonry with clay fly ash F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.) Cement mortar 1:4 (1 cement :4 coarse sand)
17	7.1.1.Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : ( CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE). , Cement mortar 1:6 (1 cement : 6 coarse sand)
18	9.48.1.Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. ( All required structural steel materials for this item shallhave to be procured by the contractor).Fixed to steel windows by welding or inserted to the walls
19	9.95.3.Providing and fixing ISI marked aluminium butt hinges anodisedtransparent or dyed to required colour or shade with necessary screws etc. complete:250x75x4 mm
20	9.96.1.Providing and fixing aluminium sliding door bolts, ISI marked anodised, transparent or dyed to required colour or shade, with nuts and screws etc. complete as direction of E-I-C : 300x16 mm
21	9.96.2.Providing and fixing aluminium sliding door bolts, ISI marked anodised transparent or dyed to required colour or shade, with nuts and screws etc. complete as direction of E-I-C , transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
22	9.97.1.Providing and fixing aluminium tower bolts, ISI marked, anodisedtransparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of E-I-C : 300x10 mm
23	9.97.2.Providing and fixing aluminium tower bolts, ISI marked, anodisedtransparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of E-I-C: 250x10 mm
24	9.100.1.Providing and fixing aluminium handles, ISI marked, anodisedtransparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of E-I-C. 125 mm :
25	9.101.1.Providing and fixing aluminium hanging floor door stopper, ISI marked, anodisedtransparent or dyed to required colour and shade, with necessary screws etc. complete as per direction of E-I-C. Single rubber stopper
26	10.1.Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
27	11.41.2.Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
28	12.41.2.Providing and fixing on wall face unplasticised Rigid PVC rain water pipes as per IS 13592, including jointing with seal ring , leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
29	13.1.2.Providingandlaying 12mm thick cement plaster in cement mortar 1:6 (1cement: 6sand) on the rough sides of single or half brick wall or masonary work using approved type sand including curing etc. all complete for all heights.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE)
30	13.2.2.Providingandlaying 15mm thick cement plaster in cement mortar 1:6 (1cement: 6sand) on the rough sides of single or half brick wall or masonary work using approved type sand including curing etc. all complete for all heights.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE)
31	13.8.Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete
32	13.16.Providingandlaying 6mmthick cement plaster toceiling ofnominal mix1:3 (1 cement: 3 sand) using approved Nowra- ngpur orBoriguma river sandincluding screening,necessarycuringetc,all complete (at any height).(CEMENT WILL BE ISSUEDFREEOF COST AT NALCO\"S STORE).
33	13.41.1.Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer
34	13.47.1.Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
35	13.61.1.Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :, Twocoats on new work
36	15.2.2.Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as per directionof Engineer - in - charge Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
37	17.7.2.Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. (CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
38	17.8.Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings
39	7261.C.P. Brass angle valve 15 mm
40	1951.C.P. brass waste 32 mm
41	17.31.Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
42	17.33.Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
43	17.71.Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
44	17.60.1.1.Providing and fixing PVC floor trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 110 mm inlet and 110 mm outlet
45	17.73.1.Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
46	18.8.2.Providing and fixing Internal Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes. (CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
47	18.8.3.25 mm nominal outer dia Pipes. (CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
48	18.12.4.Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore
49	18.13.1.Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore
50	18.49.1.Providing and fixing C.P. brass bib cock of approved quality : 15 mm nominal bore
51	18.52.1.Providing and fixing C. P. brass stop cock of approved quality : 15 mm nominal bore
52	18.17.1.Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore
53	18.17.2.32 mm nominal bore
54	18.58.1.1.Providing and fixing PTMT grating of approved quality and colour. Circulary type , 100 mm nominal dia
55	18.7.1.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia outer dia Pipes.(CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
56	18.22.2.Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter
57	18.48.Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
58	22.14.1.Grading roof for water proofing treatment with, Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
59	21.1.1.2.Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)
60	21.1.2.2.Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
61	21.2.2.Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
62	21.3.2.Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
63	21.8.1.Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in charge complete.Upto 5mm depth and 5 mm width
64	NON DSR .Providing & fixing polygranite sheet of required size and thickness of 3mm using suitableadhesive (heatx, fevicol etc ) as directed by engineer in charge
65	NON DSR.Supplyingof branded waterproofing agent for adition in fresh concrete like Dr. fixitpidiproof LW+ or equivelent as per Engineer in charge
66	Part -B, Construction of lawn tennis court, 2 nos of rooms with toilet at NALCO Club
67	2.8.1.Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains, including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
68	2.25.Backfillingwithselectedexcavated earth or any other materialsaround the foundations, under floors,pavements or any other places in layers not exceeding 15 cm, watering and ramming, consolidating etc. complete.Lead upto 500m
69	4.1.3.Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
70	4.1.6.Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size)(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
71	5.1.2.Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
72	5.2.2.Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
73	5.9.1.Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns, etc as directed by Engineer-in-Charge.
74	5.9.3.Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform as directed by Engineer-in-Charge.
75	5.9.5.Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers as directed by Engineer-in-Charge.
76	5.9.6.Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts as directed by Engineer-in-Charge.
77	5.22.4.Bending/binding Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(REINFORCEMENT STEEL/TOR STEEL SHALL BE ISSUEDFREE OFCOST ATNALCO\"s STORE), Hot rolled deformed bars
78	6.1.2.Brick work with clay flyashbrickupto plinth levelin : Cement mortar 1:6 (1 cement : 6 coarse sand) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
79	6.3.1.Brick work with clay flyashbrickin superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
80	6.3.3.Brick work with clay flyashbrickin superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)(FLY ASH BRICK WILL BE ISSUED FREE OF COST AT FLY ASH BRICK PLANT IN ALUMINA REFINERY)
81	6.13.2.Half brick masonry with clay fly ash F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.) Cement mortar 1:4 (1 cement :4 coarse sand)
82	7.1.1.Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : ( CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE). , Cement mortar 1:6 (1 cement : 6 coarse sand)
83	8.2.2.2.Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm ( CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
84	8.10.2.Providing and fixing stone slab with table rubbed, edges rounded andpolished, of size 75x50 cm deep , fixed in urinalpartitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade
85	9.1.2.Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood
86	9.6.2.Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineerin- charge and panelling with panels of : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPTI, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade 1, Type - II marked :
87	8727.Providing and fixing on flush door, wood work, 1.0 mm thick decorative laminated sheet as directed by EIC
88	9.42.Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I,including top cover of 6 mm commercial ply wood , nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flatfixed to pelmet with hollock wood cleatson both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
89	9.48.1.Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. ( All required structural steel materials for this item shallhave to be procured by the contractor).Fixed to steel windows by welding or inserted to the walls
90	9.95.3.Providing and fixing ISI marked aluminium butt hinges anodisedtransparent or dyed to required colour or shade with necessary screws etc. complete:250x75x4 mm
91	9.96.1.Providing and fixing aluminium sliding door bolts, ISI marked anodised, transparent or dyed to required colour or shade, with nuts and screws etc. complete as direction of E-I-C : 300x16 mm
92	9.96.2.Providing and fixing aluminium sliding door bolts, ISI marked anodised transparent or dyed to required colour or shade, with nuts and screws etc. complete as direction of E-I-C , transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
93	9.97.1.Providing and fixing aluminium tower bolts, ISI marked, anodisedtransparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of E-I-C : 300x10 mm
94	9.97.2.Providing and fixing aluminium tower bolts, ISI marked, anodisedtransparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of E-I-C: 250x10 mm
95	9.100.1.Providing and fixing aluminium handles, ISI marked, anodisedtransparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of E-I-C. 125 mm :
96	9.101.1.Providing and fixing aluminium hanging floor door stopper, ISI marked, anodisedtransparent or dyed to required colour and shade, with necessary screws etc. complete as per direction of E-I-C. Single rubber stopper
97	9.145.Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer\"s specification and direction of engineerin- charge.
98	9.146.Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both sidthreaded and tightened with check nuts and washers complete, all as per manufacturer\"s specification and direction of engineer-in-charge.
99	9.129.Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge
100	10.1.Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
101	10.5.2.Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 25x6mm for diagonal braces and central cross piece.(Structural steel have to be procured by contractor)
102	10.28.Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
103	11.41.2.Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
104	12.41.2.Providing and fixing on wall face unplasticised Rigid PVC rain water pipes as per IS 13592, including jointing with seal ring , leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
105	12.45.3.Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board
106	13.1.2.Providingandlaying 12mm thick cement plaster in cement mortar 1:6 (1cement: 6sand) on the rough sides of single or half brick wall or masonary work using approved type sand including curing etc. all complete for all heights.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE)
107	13.2.2.Providingandlaying 15mm thick cement plaster in cement mortar 1:6 (1cement: 6sand) on the rough sides of single or half brick wall or masonary work using approved type sand including curing etc. all complete for all heights.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE)
108	13.8.Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete
109	13.16.Providingandlaying 6mmthick cement plaster toceiling ofnominal mix1:3 (1 cement: 3 sand) using approved Nowra- ngpur orBoriguma river sandincluding screening,necessarycuringetc,all complete (at any height).(CEMENT WILL BE ISSUEDFREEOF COST AT NALCO\"S STORE).
110	13.41.1.Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer
111	13.47.1.Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
112	13.61.1.Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :, Twocoats on new work
113	15.2.2.Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as per directionof Engineer - in - charge Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
114	17.2.1.Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
115	17.7.2.Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. (CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
116	17.8.Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings
117	17.23.Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.(CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
118	1535.Supply & Fixing Flush pipe with union spreaders and clamps all in C.P. brass for single stall
119	7261.C.P. Brass angle valve 15 mm
120	1951.C.P. brass waste 32 mm
121	17.31.Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
122	17.33.Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
123	17.71.Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
124	17.60.1.1.Providing and fixing PVC floor trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 110 mm inlet and 110 mm outlet
125	17.73.1.Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
126	18.8.2.Providing and fixing Internal Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes. (CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
127	18.8.3.25 mm nominal outer dia Pipes. (CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
128	18.12.4.Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore
129	18.13.1.Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore
130	18.49.1.Providing and fixing C.P. brass bib cock of approved quality : 15 mm nominal bore
131	18.52.1.Providing and fixing C. P. brass stop cock of approved quality : 15 mm nominal bore
132	18.17.1.Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore
133	18.17.2.32 mm nominal bore
134	18.58.1.1.Providing and fixing PTMT grating of approved quality and colour. Circulary type , 100 mm nominal dia
135	18.7.1.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia outer dia Pipes.(CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
136	18.22.2.Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter
137	18.48.Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
138	19.4.1.1.Providing and fixing square-mouth PVC gully trapcomplete with grating brick masonry chamber with water tight cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5(CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE).
139	22.14.1.Grading roof for water proofing treatment with, Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
140	21.1.1.2.Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)
141	21.1.2.2.Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
142	21.2.2.Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
143	21.3.2.Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
144	21.8.1.Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in charge complete.Upto 5mm depth and 5 mm width
145	24.5.Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
146	NON DSR .Providing & fixing polygranite sheet of required size and thickness of 3mm using suitableadhesive (heatx, fevicol etc ) as directed by engineer in charge
147	NON DSR .Providing and fixing 6 layer synthetic flooring for tennis court of standard dimension (double width) with service lane and addditionalclear space around the court is needed in order for players to reach overrun balls for a total of 18.3 meters (60 feet) wide and 36.7 meters (120 feet) long as directed by Engineer in charge
148	NON DSR.Supplyingof branded waterproofing agent for adition in fresh concrete like Dr. fixitpidiproof LW+ or equivelent as per Engineer in charge
149	Part -C, Construction of store room at NALCO Club
150	2.8.1.Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains, including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
151	2.25.Backfillingwithselectedexcavated earth or any other materialsaround the foundations, under floors,pavements or any other places in layers not exceeding 15 cm, watering and ramming, consolidating etc. complete.Lead upto 500m
152	4.1.3.Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
153	4.1.6.Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size)(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
154	5.1.2.Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
155	5.2.2.Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
156	5.9.1.Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns, etc as directed by Engineer-in-Charge.
157	5.9.3.Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform as directed by Engineer-in-Charge.
158	5.9.5.Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers as directed by Engineer-in-Charge.
159	5.9.6.Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts as directed by Engineer-in-Charge.
160	5.22.4.Bending/binding Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(REINFORCEMENT STEEL/TOR STEEL SHALL BE ISSUEDFREE OFCOST ATNALCO\"s STORE), Hot rolled deformed bars
161	6.1.2.Brick work with clay flyashbrickupto plinth levelin : Cement mortar 1:6 (1 cement : 6 coarse sand) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
162	6.3.1.Brick work with clay flyashbrickin superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
163	6.13.2.Half brick masonry with clay fly ash F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.) Cement mortar 1:4 (1 cement :4 coarse sand)
164	7.1.1.Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : ( CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE). , Cement mortar 1:6 (1 cement : 6 coarse sand)
165	8.2.2.2.Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm
166	8.10.2.Providing and fixing stone slab with table rubbed, edges rounded andpolished, of size 75x50 cm deep , fixed in urinalpartitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade
167	9.42.Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I,including top cover of 6 mm commercial ply wood , nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flatfixed to pelmet with hollock wood cleatson both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
168	9.48.1.Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. ( All required structural steel materials for this item shallhave to be procured by the contractor).Fixed to steel windows by welding or inserted to the walls
169	9.95.3.Providing and fixing ISI marked aluminium butt hinges anodisedtransparent or dyed to required colour or shade with necessary screws etc. complete:250x75x4 mm
170	9.96.1.Providing and fixing aluminium sliding door bolts, ISI marked anodised, transparent or dyed to required colour or shade, with nuts and screws etc. complete as direction of E-I-C : 300x16 mm
171	9.96.2.Providing and fixing aluminium sliding door bolts, ISI marked anodised transparent or dyed to required colour or shade, with nuts and screws etc. complete as direction of E-I-C , transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
172	9.97.1.Providing and fixing aluminium tower bolts, ISI marked, anodisedtransparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of E-I-C : 300x10 mm
173	9.97.2.Providing and fixing aluminium tower bolts, ISI marked, anodisedtransparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of E-I-C: 250x10 mm
174	9.100.1.Providing and fixing aluminium handles, ISI marked, anodisedtransparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of E-I-C. 125 mm :
175	9.101.1.Providing and fixing aluminium hanging floor door stopper, ISI marked, anodisedtransparent or dyed to required colour and shade, with necessary screws etc. complete as per direction of E-I-C. Single rubber stopper
176	9.145.Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer\"s specification and direction of engineerin- charge.
177	9.146.Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both sidthreaded and tightened with check nuts and washers complete, all as per manufacturer\"s specification and direction of engineer-in-charge.
178	9.129.Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge
179	10.1.Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
180	10.5.2.Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 25x6mm for diagonal braces and central cross piece.(Structural steel shall be procured by the contractor)
181	10.28.Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
182	11.27.Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
183	11.41.2.Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
184	12.41.2.Providing and fixing on wall face unplasticised Rigid PVC rain water pipes as per IS 13592, including jointing with seal ring , leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
185	12.45.3.Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board
186	13.1.2.Providingandlaying 12mm thick cement plaster in cement mortar 1:6 (1cement: 6sand) on the rough sides of single or half brick wall or masonary work using approved type sand including curing etc. all complete for all heights.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE)
187	13.2.2.Providingandlaying 15mm thick cement plaster in cement mortar 1:6 (1cement: 6sand) on the rough sides of single or half brick wall or masonary work using approved type sand including curing etc. all complete for all heights.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE)
188	13.8.Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete
189	13.16.Providingandlaying 6mmthick cement plaster toceiling ofnominal mix1:3 (1 cement: 3 sand) using approved Nowra- ngpur orBoriguma river sandincluding screening,necessarycuringetc,all complete (at any height).(CEMENT WILL BE ISSUEDFREEOF COST AT NALCO\"S STORE).
190	13.41.1.Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer
191	13.47.1.Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
192	13.61.1.Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :, Twocoats on new work
193	15.2.2.Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as per directionof Engineer - in - charge Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
194	17.2.1.Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
195	17.7.2.Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. (CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
196	17.8.Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings
197	17.23.Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
198	1535.Supply & Fixing Flush pipe with union spreaders and clamps all in C.P. brass for single stall
199	7261.C.P. Brass angle valve 15 mm
200	1951.C.P. brass waste 32 mm
201	17.31.Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
202	17.33.Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
203	17.71.Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
204	17.60.1.1.Providing and fixing PVC floor trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 110 mm inlet and 110 mm outlet
205	17.73.1.Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
206	18.8.2.Providing and fixing Internal Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes. (CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
207	18.8.3.25 mm nominal outer dia Pipes. (CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
208	18.12.4.Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore
209	18.13.1.Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore
210	18.49.1.Providing and fixing C.P. brass bib cock of approved quality : 15 mm nominal bore
211	18.52.1.Providing and fixing C. P. brass stop cock of approved quality : 15 mm nominal bore
212	18.17.1.Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore
213	18.17.2.32 mm nominal bore
214	18.58.1.1.Providing and fixing PTMT grating of approved quality and colour. Circulary type , 100 mm nominal dia
215	18.7.1.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia outer dia Pipes.(CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE)
216	18.22.2.Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter
217	18.48.Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
218	19.4.1.1.Providing and fixing square-mouth PVC gully trapcomplete with grating brick masonry chamber with water tight cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5(CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE).
219	22.14.1.Grading roof for water proofing treatment with, Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.)
220	21.1.1.2.Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)
221	21.1.2.2.Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
222	21.2.2.Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides
223	21.3.2.Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
224	21.8.1.Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in charge complete.Upto 5mm depth and 5 mm width
225	24.5.Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge.
226	NON DSR .Providing & fixing polygranite sheet of required size and thickness of 3mm using suitableadhesive (heatx, fevicol etc ) as directed by engineer in charge
227	NON DSR.Supplyingof branded waterproofing agent for adition in fresh concrete like Dr. fixitpidiproof LW+ or equivelent as per Engineer in charge

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Gym Room, Lawn Tennis Court, 2Nos Of Room And Store Room At Nalco Club, Damanjodi, Damanjodi-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Gym Room, Lawn Tennis Court, 2Nos Of Room And Store Room At Nalco Club, Damanjodi, Damanjodi-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us