Tender For Special Repair To Bldg No P-49 And Bathrooms At Aro Complex At Mil Stn Katihar; 1 Taking down Chowkhats or frames not exc 1.5 sqm each with shutters ( without taking off shutters from the frame) incl dismantling of PCC bed blocks for hold fasts, all as specified and as directed. 2 Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, all as specified and as directed. 3 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification. 4 S&F Factory made solid panel pvc doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification. 5 M&Lfor PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in steel frame,gaps in between glazed &flyproof steel window, cills, railling up to 60mm in height etc including necessary form work as required all complete, all as specified and as directed. 6 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. 7 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. 8 Demolition of cement concrete(unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or aboveground level) complete all as specified. 9 M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded agg finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays & construction joints to be given at every 3m interval and corners of buildings and filled with bituminous mastic or equivalent filler complete all as specifed and as directed. 10 M&L for75 mm thickPCC 1:4:8 type D-2 (40 mm graded crushed stone aggs) as in in sub base finish even and rough to receive to top layer complete all as specified. 11 M&L Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and as directed. 12 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete complete all as specified and as directed. 13 M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth, all as specified and as directed. 14 Takingup or down GI Tubing15mm bore pipe and connectionincluding cleaning for refixing or removal from site as directed. 15 Takingup or down GI Tubing25mm bore pipe and connectionincluding cleaning for refixing or removal from site as directed. 16 S&F 15 mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type of pipe, all as specified and as directed. 17 S&F 25 mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type of pipe, all as specified and as directed. 18 S&F in repair 110mm boreCI/SWG drain pipes aid in trenches and jointed as specially complete all as specified and as directed. 19 Demolition and breaking up 100 mm drain pipes (salt glazed ware , Acor reinforced concrete) set in cement mortar, all as specified and as directed. 20 PVC 110mm(SWR) dia bends any radius in repairs, all as specified and as directed. 21 S&FGalvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, all as specified and as directed. 22 S&F Sheet glass, ordinary quality and glazing with oil putty in square any size in aluminium joineryin each pane ,4.0 mm thick glass complete all as specified and as directed 23 S&F 4.00mm thick figured sheet glass, ordinary quality fixed with aluminium frame works n. exc 0.5 sqm in each pane, all as specified and as directed. 24 S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium ally fixed.complete all as specified and directed. 25 S &F 125 mm size Butt hinges, medium weight, cold rolled mild steel and fixed,complete all as specified and directed. 26 S&F 150 mm Aluminium handles, cast type, anodised,complete all as specified and directed. 27 S&F Aluminium anodised barrel tower bolt of extruded section and fixed150 mm size complete all as specified and directed. 28 S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorand fixed with screw complete all as specified and as directed. 29 Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles from site, all as specified and as directed. 30 M & L for non skidcolouredCeramic tiles 7 to 8 mm thick area of eachtile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed for laying floor finishes in CM (1:6) complete all as specified and as directed 31 M&L Coloured glazed ceramic tiles 300 x 450 x 7 mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 cm thick backing with cm 1:4, all as specified and as directed. 32 M&L for Vitrified Ceramic light shade coloured tiles 10mm thick (square/rectangular ) polished, area of each tiles n exc.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or colour to match incl 15 mm screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed. 33 M&L for Vitrified Ceramic light shade coloured tiles 10mm thick (square/rectangular ) polished, area of each tiles n exc.36 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or colour to match incl 10 mm screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed. 34 Taking down cementplaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc, all as specified and as directed. 35 M&L Rendering 15 mm thick on other thanfair faces of brick work or concrete sur-faces in cement mortar 1:6 for finished even and fair,complete all as specified and directed. 36 M&L for rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound and mixed with polyester triangular fibre as per manufacturer instructions for finished even and smooth (without using extra cement) (WPC and triangular fibre will be measured and paid separately) including providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement. 37 Supply only liquidwater proofing compound, complete all as specified and directed. 38 Supply only polyester triangulerfibres as secondary reinforcement in all types of concrete and mortars,complete all as specified and directed. 39 M&L for prepration of new plastered surfaces ofwall applying two coat of oil emulsion distemper over 1 mm thwall care putty to obtained smoothness of plastered surfaces complete all as specified and as directed. 40 M&L for prepration of newly plastered surface andappplying two coatsofacrylic smooth exterior paint of required shade over 1 mm thick wall care putty etc complete all as specified and as directed. 41 M&L for complete removal of old decorated surfaces of walls appplying two coatsofacrylic smooth exterior paint of required shade over 1 mm thick wall care putty etc complete all as specified and as directed 42 Material and labour for preparation of old surfaces of walls and applying one coat of oil bound distemper, complete all as specified and as directed 43 S&F in repairsStop valves 15mm dia, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, but fancy type, chromium plated with long shank and cup (concealed type), all as specified and as directed. 44 S & Fin repairs 15 mm bore bib taps fancy type cast copper alloycromium plated screwed down, screwed for iron pipe or for brass ferrule, all as specified and as directed. 45 S&F of angle stop valves 15mm dia, cast chromium plated, screwed down, high pressure, screwed both ends for iron pipe and fixed, chromium plated with long shank and cup, all as specified and as directed. 46 S&F in repairs of pillars taps fancy type, cast copper alloy with capston heads, chromium plated screwed down high pressure, screwed for iron pipe 15mm bore , all as specified and as directed. 47 S&F in repair water closet (Squatting pattern) of vitreous china squatting pan of pattern ORRISA pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) incl connectio to trap and flushing pipeetc complete incl trap set in and incl concrete complete all as specified and as directed. 48 Supply and fixingPVC valve less syphonic action type flushing cistern low level, white with PVC in let ball valve, float and handle incl brackets , 10 ltrs capacity and connection to pipesset with concrete and making good to floor, fixed as in repair complete all as specified & directed. 49 S&F as in repair of wash hand basin vitreous China, white, flat back (550x400mm) including brackets, cutting for and pinning ends of brackets or errecting stand and waste coupling of PTMT with long screwed shanks and fly nuts,full threaded flage end bedded in white cement, all as specified and as directed. 50 S&F in repairs brass chromium plated shower rose 125mm size any colour for fixing with 15mm pipe, all as specified and as directed. 51 S&F PVC connection 15mm size with PTMT nuts,450mm length, all as specified and as directed. 52 S&F in repair towel rail 600mm, 20mm dia, D typeof brass chromium plated fixed with and including CP brass screws, all as specified and as directed. 53 S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, all as specified and as directed. 54 Supply and fixing 100mm dia chromium plated grating with waste hole, fixed as in repairs complete all as specified and directed. 55 Supply and fixing 100mm dia chromium plated grating , fixed as in repairs complete all as specified and directed. 56 Supply and fixing PVC waste pipe suitable for 32mm dia bore waste coupling fixed as in repairs, complete all as specified and directed. 57 M&Lin repairs for PVC (SWR) floor trap 75 mm,plainwith grating incl jointing with solvent cement, all as specified and as directed. 58 S&F of 1000 litre capacity rotational moulded polyethylene water storage tank (Cylinderical vertical with close top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling old one and provn of all necessary fittings complete, all as specified and as directed. 59 Demolition of brickwork built in cement mortor including all quoins arches, pillars etc complete & removal as specified, all as specified and as directed. 60 M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 mmean radius built in CM 1:6 incl demolition of old bricks, all as specified and as directed. 61 S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleatsMinimum weight 300gms), all as specified and as directed. 62 Supply & fix as in repairharrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc, all as specified and as directed. 63 Dismantling ceilingboards, any thickness including cover fillets old frame work any type complete all as specified and directed 64 Providing & fixing false ceiling with semi perforated 12 mm thick micro tegular edges atall heights with GRG (Glass FibreReinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS8225:1987, Noncombustible as per BS4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge 65 Dismantling of any type of corrugated or semi corrugated sheets as in roof covering incl. ridges & removing from site, all as specified and as directed. 66 S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed 67 Dismantling wrought iron or mild steel work of any description complete, all as specified and as directed. 68 Material and labour for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade ST-240, all as specified and as directed. 69 M&L for two coat of synthetic enamel paint over a coat of red oxide including preparation of new steel surfaces all as directed. 70 M&L 18 mm thick PVC sheet plelaminated economic/economic colourboth side , cut according to the size of the cabinet or for kitchen drawer provided and the groove to be made on the one edge so that the overlapping could be done for double leafshutter including fixing with 1.25 Mild steel screw to the frame with the channel,complete the work accordingdirections of Engineer-in-Charge, Including dismantling of any type of Board complete all as specified and directed. 71 M&L 9 mm thick PVC sheet plelaminated economic/economic colourboth side , cut according to the size of the cabinet or for kitchen drawer provided and the groove to be made on the one edge so that the overlapping could be done for double leafshutter including fixing with 1.25 Mild steel screw to the frame with the channel,complete the work accordingdirections of Engineer-in-Charge, Including dismantling of any type of Board complete all as specified and directed. (Make - Rahjshri / Kumar archtech ) 72 S&F sainless steel handles 100 mm fixed with screw complerte all as specified and as directed 73 Auto close stainless steel (clip hinges) 75mm size suitable for cupboard shutter fixed in position with stainless steel screws, fixed as in repairscomplete all as specified & directed. 74 Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixingframe the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-inCharge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made, all as specified and as directed. 75 Demolition of cement concrete (unreinforced) as in benching ,cover fillets , roof kerbs, kerbs PCC pading over roof and of any description and in any position not otherwise speceally provided for , including taking down existing un-serviceable waterproofing treatment from roof slab surface, roughening of old concrete surface by picking , cleaning the surface by wire brush and also including disposing off the retrived debrisoutside the premises / site, complete all as specified and directed by Engr-in-charge 76 M&L for 40 mm thick cement concrete type B0 (1:2:4) (using 12.5 mm crushed stone aggregates) admixed with admixture conplast WL Xtra (of Make FOSROC or equivalent brand of other manufacturer) at the rate of 125 ml / 50 kg bag of cement and vergin polypropylene fibre (Recon) (of make Reliance or equivalent brand of other manufacturer ) at the rate of 125gm per 50 kg bag of cement , as in padding over roof etc, finished even and smooth without using extra cement , complete all as specified and directed by Engr-in-charge 77 M&L for water proofing coating with polyurethane based water proofing liquid membrane to be applied by brush with three coats of minimum dry film of total thickness 1 mm thick and shall be cured by reaction with atmospheric moisture to give a tough elastomeric water proofing membrane , complete all as specified and directed by Engr-in-charge 78 M&L repairing of cracks & honeycomb treatment by injection grouting by identifying the cracks and joints, chasing shall be chased open into U grove shape. The surface of the groove shall be suitabily prepared as required to apply the mortar. Apply a bond coat of SBR latex (of make FOSROC or equivalent brand of other manufacturer) and sealed with shrinkage controlled , polymer modified, fibre reinforced cementitious repair mortar fixing PVC nozzle, injetion grouting to be done with cement slurry admixed with expanding grout asmixture to be mixed @ 225 gm/ 50 kg bag of cement complete all as specified and directed by Engr-in-charge 79 M&L for bore packing to be done at pipe entries by forming proper formwork and filling the gap with non-shrinkable cementitious grout and sealed with epoxy/polyster sealant, complete all as specified and directed by Engr-in-charge 80 Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete fittings such as switches and fixtures ceiling roses, pendants, regulators, sockets, lamp holders, bracket light fittings, bulk heads fittings, tube light fittings etc removingthe materials from site and making good disturbed surfaces of walls, floors etc complete all as specified and directed. 81 S&F point wiring for one light/fan/bell /5amp socket outlet same board/5amp socket outlet independant board point,controlled by one, one way switch with 1.5 sqmm size,PVC insulated and unsheathed1100 volts grade, single core stranded (multistrand) copper conductor (FRLS) cable drawn into & including midium grade PVC conduit (not less than 20mm outer dia) with all fittings and accessories fixed concealed (including chase cutting in brick/stone masonry walls for fixing conduit and plastering the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3mm thick plastic laminated sheet covers/ modular plate fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 sqmm solid copper conductor cable earth wire and connected to earth dolly complete all as specified and directed, are as follows :- 82 (A) One light /one fan/one bell point controlled by one switch, all as specified and as directed. 83 (B) One socket outlet 5 pin 5 amps controlled by one switch on same board, all as specified and as directed. 84 (C) One socket outlet 5 pins 5 amps controlled by one switch on independentboard, all as specified and as directed. 85 All as per item No 2 herein before but wiring with 2.5 sqmm copper wire (FRLS)and 2.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board, all as specified and as directed. 86 S&F modular switchsingle pole, one way 6 amps complete all as specified and directed. 87 S&F modular socket outlet multi 5 pins 6 amp,complete all as specified and directed. 88 S&F modular switchsingle pole, one way 16 amps complete all as specified and directed. 89 S&F modular socket outlet 2 in 1, 6 pins 16 amp,complete all as specified and directed. 90 S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed. 91 S&Fmodular step fan regulator, 120 watt, 2 moduleAC, 230V, 50Hz complete all as specified and directed. 92 S&Fcall bell multi musical type, AC, 230V single pole fixed over with and including sunk spressed steel box of size 175mm x 100mmwith 3mm thick plastic laminated backalite shut cover fixed with brass screw complete all as specified and as directed. 93 S&Fmodular bell push,single pole 6 ampscomplete all as specified and directed. 94 S&Fmodular white cover plate with frame 3 module, all as specified and as directed. 95 S&Fmodular white cover plate with frame 8 module, all as specified and as directed. 96 S&Fmodular white cover plate with frame 12 module. Make - Legrand,roma,havells,complete all as specified and as directed. 97 S&Fmodular metal flush box3 module.Make - Legrand,roma,havells,complete all as specified and as directed. 98 S&Fmodular metal flush box8 module, all as specified and as directed. 99 S&Fmodular metal flush box12 module, all as specified and as directed. 100 Supply and fixing LED light fittings 1x20 W ,220V,environmental friendly,energy efficient color temperature 6500K, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make LED Pride Essential Batten 20 W 6500 K of Havells catalogue no LHEXAWP7IN1W020 or equivalent approved make, complete all as specified and as directed. 101 Supply and fixing LED light fittings 1x10 W ,220V,environmental friendly,energy efficient color temperature 6500K, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make LED Pride plus neo of Havells catalogue no LHEXACP7IN1W010 or equivalent approved make, complete all as specified and as directed. 102 Supply and fixing LED bldg security light fitting 25 watt 230V, AC outdoor type with high pressure die cast aluminium hosing and head resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete of make /HPL/Bajaj/Havells, complete all as specified and as directed. 103 S&F MCB, SP, 240 volts, AC, C curve, 10 KA,6 to 32 amps, all as specified and as directed. 104 S&F MCB, SPN, 240 volts, AC, C curve type, 10 KA, 32 amps, all as specified and as directed. 105 S&F sheet metal enclosure for DBs (double door type) when MCBs - SPN/SP to be used Single pole and neutral 8 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and as directed. 106 S&F sheet metal enclosure for DBs (double door type) when MCBs - SPN/TPN to be used, Triple pole and neutral 4 way incl blanking plate as reqd with 200 amps rated busbar 415V fixed sunk/flush to the wall or niche complete all as specified and as directed. Make : Havells/Legrand or equivalent with IP 65/66 protection. 107 Taking down the ceiling fan & exhaust fan, servicing/ greasing, oiling the fans including rewinding theus fans, after complete the spl repair bldg wkre-fixing the fans including plywood wkwindows for fixing the exhaust fans, all as specified and as directed by the Engineer-in-charge. 108 S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 Volt, complete, fixed in repairs, all as specified and as directed. 109 Taking down the geyser, servicing,changing minor parts like connection pipe, nut bolt etc incl painting, after complete the spl repair bldg wk and re-fixing the geiser, all as specified and as directed by the Engineer-in-charge.
