|
| 1 | M&L for preparation of old plastered or unplastered surfaces of wall including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of white lime wash on wall complete all as specified and directed. |
| 2 | M&L for preparation of old plastered or unplastered surfaces of ceiling includingbrooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of white lime wash on ceiling complete all as specified and directed. |
| 3 | M&L for preparation of old plastered or unplastered surfaces of wall including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of cement base paintcomplete allas specified and directed. |
| 4 | M&L for complete removal of existing treatment of old plastered surfaces of wall and applying two coat of white washincluding preparation of surfaces, complete allas specified and directed. |
| 5 | M&L for preparation of old plastered surfaces of walls and applying one coat of oil emulsion distemper complete all as specified and directed. |
| 6 | M&L for complete removal of existing treatment,washing, rubbing down and stopping of distempered and painted surfaces of wall and preparing the surfaces even and smooth using 1 mm thick plaster of paris putty andapplying two coats of oil emulsion distemper over a coat of primercomplete allas specified and directed. |
| 7 | M&L for preparation of old painted wooden or wooden based surfaces of any description, not otherwise described,over 10 cm width or girth andapplying one coat of snythetic enamel paint (first quality),complete allas specified and directed. |
| 8 | M&L for preparation of old painted steel surfaces of any description, not otherwise described,over 10 cm width or girth andapplying one coat of snythetic enamel paint (first quality),complete allas specified and directed. |
| 9 | M&L for removing of old paint fron steel surfacesby paint remover or burning offby blow lamps and cleaning with scrappers, any number of coats, any width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer,complete all as specified and directed. |
| 10 | M&L for complete removal of existing treatment, washing, rubbing downand stopping of distempered and painted surfaces of wallsand applying one coat ofacrylic smooth exterior paint (weather coat) complete all as specified and directed. |
| 11 | M&L for writing building numbers, letters or figures (Block, Roman, Italic or Indian) by writing with black synthetic enamel paint n.exc 30 cm high complete as specified and as directed. |
| 12 | Taking down cement plaster any description on brick or stone wall etcincluding rackingout joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed, complete all as specified and directed. |
| 13 | M&L for 15mm thick rendering in CM (1:4) on external surfaces of brick work, stone masonry or concrete surfaces finished fair and even , complete all as specified and directed. |
| 14 | M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfacesfinished even and smooth without using extra cement, complete all as specified and directed. |
| 15 | M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed. |
| 16 | M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 2 mm thick wall care putty on walls, complete all as specified and directed. |
| 17 | Dismantling plain or corrugated steel sheeting (Roof covering) of any description or any gauge or thickness complete all as specified and directed. |
| 18 | Demolition of brick /block or stone measonry built in cement mortar, complete all as specified and directed. |
| 19 | Dismantling wall and ceiling boards of any description or any thickness including cover fillets complete all as specified and directed. |
| 20 | Dismantling floor hearth / wall tiles including cement mortar bedding (but not backing) and removing from site complete all as specified and directed. |
| 21 | Demolition of cement concrete terrazo (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed. |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 23 | S&F rolled mild steel Fe -290(Gde E-165)forRoof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing, chowkhat(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 24 | S &F Galvanised, corrugated mild steel sheeting, 0.63 mm thick, with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in roofs etc. with grade of zink coating 120 gm/sqm, complete all as specified and directed. |
| 25 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering with self tapping screws complete all as sepcified and as directed. |
| 26 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge hips, valley gutters, drip and straight flashings (length and girth as fixed) ffixed with self tapping screws complete all as sepcified and as directed |
| 27 | S &F Plain, galvanised, mild steel sheeting, 0.80 mm thick,as in ridge, hips, valley gutters, drip and straight flashings (length and girth as fixed)with grade of zinc coating 120 gm/sqm, complete all as specified and directed. |
| 28 | S &F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed. |
| 29 | M&L for Pre-cast cement concrete block masonry in 1:3:6 type C1 using 20mm graded stone agg with solid block exc 10cm width and setting in CM 1:6, complete all as specified and directed. |
| 30 | S&F anodised aluminum snap grid of size 605 X 605 mm frame work for false ceiling including hangers of 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, complete all as specified and directed. |
| 31 | S&F exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm X 600 mm grid (frame work for ceiling shall be measured and paid seprately) complete all as specified and directed. |
| 32 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring etc., complete all as specified and directed. |
| 33 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm,as infloors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade of tiles over and including 15mm thick cement screed bed or bedding layer in CM (1:4) complete all as specified and as directed. |
| 34 | All as per Item No 33 here-in-before, but as in skirting/dado over and including 10mm thick backing coat / rendering rough finished in CM (1:4) complete all as specified and directed. |
| 35 | M&L for non - skid ceramic coloured joint freetiles 7 to 8 mm thick(Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bedin CM (1:4) complete all specified and directed. |
| 36 | All as per Item No 35 here-in-before, but as in skirting/dado over and including 10 mm thick backing coat / rendering rough finished in CM (1:4), complete all as specified and directed. |
| 37 | M&L fornon - skid ceramic coloured joint freetiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, infloors etc. set and jointed in neat cement slurry and pointed in white or colouredcement to matchthe shade of tile over and including 15 mm thick screed bed or bedding in CM (1:4) complete all specified andas directed. |
| 38 | M&L forglazed clolour ceramic tiles of size 300x200x6-7 mm thick as in vertical/dado surfaces over 10mm thick rendering as a back coat rough finished in CM 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement with pigment, complete all as specifed and as directed. |
| 39 | M&L forcolouredglazed ceramic tiles in vertical surface 350 x 250 x 7 mm/450 x 350 x 7 mm thickset and jointed in neat cement slurry and pointed in white or colour cement to match, laid over & including rendering 10mm thick as backing coat rough finished in CM (1:4) on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles/granite complete all as specifed and as directed. |
| 40 | M&L for 75mm thick PCC (1:4:8) type D2 ( using 40mm gradded stone aggreggate) as in sub base offloor, path etc., complete all as specified and directed. |
| 41 | M&L coloured chequered cement concrete tiles 20cm x20cm x 25mm/ 30cm x30cm x 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer of CM (1:4) as in floors/paths etc., complete all as specified and asdirected. |
| 42 | M& L for 50 mm thick PCC 1:3:6 type C-1(usingmechanically crushed20 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement including forming joints in 2 mtr intervals and filled with bitumen mastics complete all asspecified and as directed. |
| 43 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid bedded and pointed in any mortar complete all as specified and directed. |
| 44 | M&L for Machine cut kota stone (550 mm x 550 mm size) slab flooring 18-20 mm thick as in floor over 15mm thick screed bed in CM 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 45 | Taking down chowkhats with shutters (without taking off shutters from the frame) and removing from site, area not exceeding 1.5 Sqm each, complete all as specified and directed. |
| 46 | All as peritem No 45 here-in-before, but area exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. |
| 47 | Taking down of shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and directed. |
| 48 | S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 49 | S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 50 | M&L for providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as in holdfasts for pressed steel chowkhats, complete all as specified and directed. |
| 51 | S&F for providing 18 /19 mm thickpre laminted particle board exterior grade prelaminated on both sides and decorative choice fixed for cupboard, kitchen cupboardand shelving complete all as specified and directed. |
| 52 | S&F for continuous hinges mild steel bright finish or electrogalvanised width of flap 30mm, complete all as specified and directed. |
| 53 | S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 54 | S&F 2nd class hard wood 35 mm thick plain, framed,panelled shutters(any no ofpanels) with panels of timber flat on both sides (feather edge) or of veneered partical board medium density, wood partical board with commercial face veneers; supply and fix to chowkats complete all as specified. |
| 55 | S&F 2nd class hard wood 35 mm thick Glazed and sketon shutters,open rebeated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SS Part-I, section 8, clause 8.24 (a) supplied and fited to chowkat complete all as specified and directed. |
| 56 | S&F solid PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing complete all as specified and directed. |
| 57 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to this stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification and drawing all as specified in SSR Part-II 2020 section 8, complete all as specified and directed. |
| 58 | S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, complete all as specified and directed. |
| 59 | S&F aluminum anodized frame for doors, windows, ventilatorswith one or more rebated including jointingcleats for fixing etc complete all as specified. |
| 60 | S&F aluminum anodized door shutters, aluminum section weighing 0.55 Kg/m including necessary, jointing cleats, glazing clip, rubber neoprene packing handles two nos in each door, hinges three nos in each leaf, anodized snap beading screws etc powder coating of any colourcomplete all as specified and as directed. |
| 61 | S&Faluminum anodised window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc. complete all as specified and as directed. |
| 62 | S&F mortice brass lock vertical type size 100mm with 4 levers complete all as specified and as directed. |
| 63 | S&F floor spring double action hydraulically regulated made up of min 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty ISI Marked fixed in position, complete all as specified and as directed. |
| 64 | S&F aluminum (die cast ) body door closer hydraulically regulated designation No 3 universal type, suitable fo door shutters of 851 to 1000 mm in width andof weight between 61 to 80 Kg. C omplete all as specified and as directed. |
| 65 | Taking downsteel window/ventilator including guard bar, complete all as specified and directed. |
| 66 | S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded, complete all as specified and directed. |
| 67 | All as per item No 66 here-in-before, but withoutglazing bars, complete all as specified and directed. |
| 68 | S&F 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed. |
| 69 | S&F 100 mm butt hinges, extruded aluminum alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed. |
| 70 | S&F 250 mm aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminum alloy and fixed complete all as specified and directed. |
| 71 | S&F 200mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. |
| 72 | S&F 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. |
| 73 | S&F 150 mm aluminum handles, cast type, anodised complete all as specified and directed. |
| 74 | S&F 100 mm aluminum handles, cast type, anodised complete all as specified and directed. |
| 75 | S&F aluminum alloy body and tongue, anodised floor door stopper 140 mm long with hard drawn steel spring fixed in any position etccomplete all as specified and directed. |
| 76 | S&F mild steel 300mm ordinary rat tail rod pattern springs including roller, roller plate, complete all as specified and directed. |
| 77 | S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed. |
| 78 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed. |
| 79 | S&F 4.8 mm thick tinted glass selected type quality for aluminum doors/ windows including rubber gasket/neoprene pad etc complete all as specified and directed |
| 80 | M&L for prepartion ofnewwooden surfaces anydescription not otherwise described and exc10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 81 | M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specifiedand directed. |
| 82 | Hacking out old broken glass (any thickness size quality or description) from woodenor steel frames glazed with putty or fixed with beads, complete all as specified and directed. |
| 83 | S&Fsheet glass 4mm thick ordinary quality and glazing with oil putty or beadings in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 84 | TakingdownGI tubing and connection 15 mm dia including cleaning of serviceable pipe forreuse and removal of unserviceable tube from work site, complete all as specified and as directed. |
| 85 | Taking down GI tubing and connection 20 mm dia and removal of it from work site, complete all as specified and as directed. |
| 86 | S&F GI tubing medium grade of size 15 mm boreincluding all fittings such as bend, Tee, union, socket etc complete fixedto wall, ceiling and laid in floor etc completeall asspecified and directed. |
| 87 | All as per Ser Item No. 86 here in before, but except GI pipe, complete all as specified and directed. (Old serviceable pipe shall be used as obtained from Srl Item No 84 here-in-before). |
| 88 | S&F GI tubing medium grade of size 20 mm boreincluding all fittings such as bend, Tee, union, socket etc complete fixedto wall, ceiling and laid in floor etc completeall asspecified and directed. |
| 89 | S&F in repairsstop valves 15 mm dia chromium plated,fancy type, cast copper alloy,screwed down high presser with crutch or butterfly handle, screwed both ends for iron pipe or for unions andfixed complete all as specified and directed. |
| 90 | S&Fin repairglass shelf with sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed. |
| 91 | S&F in repairs 15 mm bore bib taps, cast copper alloy, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrulecomplete all as specified and directed. |
| 92 | S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 93 | S&F in repairs 15 mm bore brass CP mixer, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered \"Hot or cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 94 | S&F in repairs Vitreous China wash down water closetEWC (Pedestal pattern), standard size, white (including fixing bolts, flushing cistern and flush pipe), plastic seat and cover white, closed pattern with flat bottom, mild steel chromium plated or anodised hinging devices, connected to drains outlet including chromium plated steel jet pressure unit, fixed as in repairs, and removal of old from site, complete all as specified and directed. |
| 95 | S&F in repair of existing water closet (squatt pattern) and foot rest with vitreous china (white) first quality water closet, Orissa pattern size 580x440 mm with integral foot rests, including 100mm castiron \"P\" or \"S\" trap and 100 mm cast iron sanitary connection socket to fit WC outlet, complete including fixing of flush pipe with seat and making good the disturbed floor surfaces to match with existing and making connections serviceable complete all as specified and directed. |
| 96 | S&Fin repairs PVC virgin polypropylene, valve less syphonic action type flushing cistern 10 ltr capacity, low level, white/coloured with inlet ball valve withfloat and handle including new bracket fixed in position, PVC bend/flush pipe 32 mm dia, complete including connections to water mains with and including 15mm dia, 450 mm long PVC connection pipes with PTMT checknuts (excluding taps) complete all specified and directed. |
| 97 | S&F in replacement of internal flushing systern fittings (kit ) of make as per existing fitting complete all as specified and as directed. |
| 98 | S&F in repairs PVC connection 15mm size with PTMT nuts and 450/600mm long complete all specified and directed. |
| 99 | S&F in repairs , first quality , wash basins, vitreous china, white, flat back of size 550x400mm , includingpillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipesincluding brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets, complete all as specified and directed. |
| 100 | S&F in repairs 19/20 mm dia curtain rails mild steel chromium plated with fixing brackets, stops, roller etc, complete all as specified and directed. |
| 101 | S&F MS with PVC coateddecorativecurtain rod 22-25mmwith fixing brackets, knobs etc., as in repairs complete all as specified & directed. |
| 102 | Dismantling water tanks and removing to storeexc 250and n.exc 500 ltrscomplete all as specified and directed. |
| 103 | Dismantling water tanks and removing to store exc 500 but n. exc 1000 ltrscomplete all as specified and directed. |
| 104 | Dismantling water tanks and removing to store exc 1000 but n. exc 2000 ltrscomplete all as specified and directed. |
| 105 | S & F 500 ltr capcity rotational moulded polyethylne water storage tanks (cylindrical vertical with closed top) duly provided with necessay fittings/fixtures for connecting inlet, outlet, washout and overflow pipes, noisted incl ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20 mm bore and fixed in position complete all as specified and directed. |
| 106 | All as per item No 105 here-in-before, but 1000 ltr capacity, complete all as specified and directed. |
| 107 | All as per item No 105 here-in-before, but 2000 ltr capacity, complete all as specified and directed. |
| 108 | Disconnecting existing tanks exc 250and n.exc 500 ltrs , setting aside (orlowering if required) forrepairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 109 | All as per item No 108 here-in-before, but of 1000 ltr capacity complete all as specified and directed. |
| 110 | S&F in repairs for 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe complete.(Note: Ladder required for repair work shall be arranged by the contractor.) |
| 111 | M&L for welding in repair exc 2.5 cm but n exc 5 cm in length, thickness of metal to be welded n exc 6mm, complete all as specified and directed. |
| 112 | M&L for powder coated aluminum door seal 1000 mm long, 30 mm wide including dust/insect arrestor in repair complete all as specified and directed. |
| 113 | S&F in repair 600mmx450mm and 5mm thick bevelled edge mirror of selected quality glass mounted on 6mmm thick AC building board or commercial ply wood including framing and fixed to woodenplugs with CP screws & cup washers & fixed complete all as specified and directed. |
| 114 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specifiedand directed. |
| 115 | S&F in repair bidet jet spray triangle nozzle made of brass chromium plated high quality PVC silver tube of 1 mtrmaking connections and fixed in position complete all as specifiedand directed. |
| 116 | M & L for Mild steel, plain, black sheet 0.80 mm thickin hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; drain cover, water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc. with hinge and openablewith plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. in repairs, complete all as specified and directed. |
| 117 | Schedule of Credit |
