Tender For Electrification Work Of 6 Percent Abadi Plots In Village Gharbara, Greater Noida, 1 BOQ 2 Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) 11 KV grade at a depth of 900 mm below ground levelover a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides andon top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc.UPPWD schedule 2018 item no 506 (f),120 sq mm 3 core 11Kv grade XLPE cable 3 Supply. Delivery. Installation, Testing & Commissioning of 11 KV Straight through cable jointing kit of 3 core cable for cable jointing. Complete in all respects as required for proper completion of work. SOR-7 (make Raychem/C.C.I./ Frontee) 4 (c) 3CX120/150/185 Sq.mm. 5 Supply, Delivery, Installation, Testing & Commissioning of 11 KV Out door type cable termination kit of 3 core cable for cable termination at the panel & transformer complete in all respects as required for proper completion of work. (650mm length) SOR-6(make Raychem/C.C.I./Frontec) 6 3CX120/150/185 Sq.mm. 7 Supply & erection of Steel tubular pole with 1/6 over all length of pole grouted with cement concrete in 1:3:6 (1 cement : 3 coarse sand : 6 stone ballast) including plinthing of pole 30 cm above the ground level, plastring of plinth including excavation back filling etc. The rates includes all materials labour & T&P. etc. required for proper completion of work as per direction of E/I. SOR-21 8 410 SP-56, 11 mtr, (Approx. wt. 241kg.) 9 S/E of Section Double pole structure on ST pole 410 SP 56 with 1/6 over length of poles grounted with cement concrete in 1:3:6 (one cement: 3 coarse sand :6 Stone balleast) including plingthing of pole 30 cm above grade level, plastering of plinth including excavation & back filling etc. The double pole structure consist of 100X50X2.24 mtr. & 75X40 mm 2.24 mtr. M.S. channel and bracings with M.S. clamp packing piece Nuts Bolts etc. The rates includes all materials labour T&P etc. required for proper completion f work as per direction of E/I. SOR-22 10 Supply & erection of strut consisting 410 SP-55,11 mtr long ST.pole with M.S clamp complete with grouting etc complete in all respect ete as per Direction of Engineer in charge. (pole+clamp rate up pwd schedule 2018) item no 623 11 Supply, delivery, testing, laying of Al. conductor HDPE/XLPE insulated 11000V grade Arial Bunched Cable with Messenger wire as below on pole complete in all respect. (CCI (Bombay/Nashik), Fort Gloster (Calcutta / Baripara), Asian (Thane / Silvasha), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells, Kalinga, Suraj, Delton Grandley & Polycab make can be used) SOR-50 12 3CX120 Sqmm. + 95 Sqmm. 13 Supply & erection of stay set at least 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm x 600 double screw tightener, 7/4.00 mm G.I stay wire etc. in 1:3:6 cement concrete complete in all respect.as per uppwd schedule 2018 item no. 630 14 S/F of one side cross arm made of 100x50x6mm M.S. channel 0.90mtr. Long & 50x50x6mm M.S. angle 1.0 Mtr. Long with M.S. clamp, nut bolts etc. complete in all respect. (AR) 15 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. item no 701 16 Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. Uppwd schedule 2018 item no 716 17 S/F of 11 KV Disc with Gun fittings on cross arms/clamps fixed on poles including all Nut, bolts & washer etc. for proper completion of work. (Jaishree, BHEL, RR, Hindustan make) SOR-32 18 S/F of cross arm made of 100X50 mm M.S. channel 2.5 mtr. long on poles with packing, piece, M.S. clamp, Nut bolts etc. complete in all respect. SOR-28 19 Supply & Erection of End clamp (J Hook) (AR) 20 Supply & Erection of Screw Tightner (AR) 21 S/F of suspension clamp with insulated suitable ABC arial bunched conductor complete in all respect (AR) 22 S/F of 11 KV Drop-out type fuse set channel type of ‘Relco’ or equivalent make with insulators and other accessories required for proper completion of work. SOR-40 23 Supply & fixing steel tubular pole 10 Metre long designated 410 SP-42 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect.as per aproved Rate of UPSIDA 24 410 SP-42, 10 mtr., (Approx. wt. 144kg.) 25 S/F of G.I. pipe 100 mm dia ‘B’ class ZINDAL / TATA make including required material, T&P etc. complete in all respects. SOR-37 26 Painting of the electric pole with two coat of Al-paint over red oxide primer complete in all respect. (PS-634) (Last Approved year 2012-2022 FTS 131866) 27 Supply, delivery, testing, laying of Al. conductor HDPE/XLPE insulated 11000V grade Arial Bunched Cable with Messenger wire as below on pole complete in all respect. (CCI (Bombay/Nashik), Fort Gloster (Calcutta / Baripara), Asian (Thane / Silvasha), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells, Kalinga, Suraj, Delton, Grandley & Polycab make can be used) SOR-50 (Last Approved year 2012-2022 FTS 131866) 28 3CX95 Sqmm. + 1CX50 Sqmm.+ 70 Sqmm. Massanger 29 S/F of L.T. Junction Box on pole suitable for outdoor type operation of size 388X304X170mm made of 3.0mm CRCA sheet complete in respect as per direction of E/I. 30 S/F of 50 Sqm to 16 Sqm L.T. ABC connector on pole complete in all respect (A/R) 31 S/F of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the Engineer-in-charge.PS-504 (SOR-138) 32 95 Sqmm. 33 50 Sqmm. 34 Supply and fixing of LED Street light Fitting having die cast aluminium body anddiffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect.er with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect.as per uppwd schedule 2018 item no 1423 Cat AA 35 Supply & fixing of 100 mm x 110 mm shackle insulator /100 mm x 80 mm pin insulator including G.I. Bolts / spindle nuts etc. complete in all respect. Item no 36 Supply and fixing following dia G.I. pipe (B class) in pole Used as LED street light bracked for fixing of LED of street light and for cable entry including bending the pipe to the required shape complete as required (Each piece make 1.5 Mtr Long). DSr-18/11.6.2 (use as street light bracket) (Last Approved year 2012-2022 FTS 131866) 37 40 mm dia 38 Supply and fixing following capacity of automatic street light cubicle contoral panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with ML-3. contactors, HRC fuse, isolating metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 39 25Amp.TPN (As per UP.PWD schedule 2018 item no.807 e (2) 40 Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect. (G.I. wire should use as a support to bind overhead line with it at interval of 5 mtr.) As per UPPWD Schedule-628 41 Supply and wiring of submains with 2 nos. 2.5 sq mm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge. as per up pwd schedule 2018 item no 289 42 S/L of 90mm dia. DWC pipe for drawing of power cable across the road by drilling of 120mm dia. at 1mtr. below the road level thereby doing the work of providing DWC pipe by Trenchless method. SOR-53 43 Supply & fixing of anticlimbing device fabricated from G.I.(flat) of 25 mm x 6mm size in a shape of ring of the pole size, having G.I. flat pointed fins of length 225 mm in 8 nos. including all the materials, labour, T&P and other material required for proper completion for work and to the satisfaction of Engineer-in-Charge.as per uppwd schedule 2018 item no 635 44 Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. DSR 2018 item no.13.10 45 Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. 46 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in air the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer- Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PS-501-507) 47 i) 16 sq. mm 4 core 48 Labour Cess will be paid extra as per applicable 49 GST will be paid extra as per applicable
