|
| 1 | (Dismantle of Floor Tile) Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead, For thickness of tiles 10 mm to 25 mm |
| 2 | (Dismantle of Brick wall) Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 3 | Jali wall |
| 4 | (Demolishing Floor) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 5 | (PCC Work 1:5:10) 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | right side of clinical add room |
| 7 | (PCC Work 1:2:4) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Area 2 |
| 9 | Pantry counter |
| 10 | Pantry Floor |
| 11 | (Reinforcement) Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more (use steel bar 8 mm dia) |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 13 | Front wall |
| 14 | (Plaster work) 12 mm cement plaster of mix :room inside |
| 15 | 15 mm cement plaster of mix :room outside |
| 16 | 12 mm cement plaster of mix : Pantry inside |
| 17 | 15 mm cement plaster of mix : Pantry outside |
| 18 | (Putty work) Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 19 | Outer wall |
| 20 | Pantry inside wall |
| 21 | Pantry outside wall |
| 22 | (Paint work) Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. (Make- Asian / Burger) |
| 23 | Wall |
| 24 | Inside and outside wall |
| 25 | Inside wall |
| 26 | Pantry inside wall |
| 27 | Outside wall |
| 28 | (Vitrified tiles) Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints .Size of Tile 1000x1000 mm ISI marked (Make - Somany/ Kajaria/Orientbell/ Johnson) |
| 29 | Pantry Floor |
| 30 | (Ceramic Glazed Wall tiles) Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. ISI marked (Make - Somany/ Kajaria/Orientbell/ Johnson) |
| 31 | Bathroom wall inside |
| 32 | (Ceramic Glazed floor tiles) Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeISI marked (Make - Somany/ Kajaria/Orientbell/ Johnson) |
| 33 | (Half Brick work) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 34 | Jali wall |
| 35 | Pantry wall |
| 36 | (Black Granite) Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm |
| 37 | (Flush Door) Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 38 | Bathroom gate |
| 39 | (Fiber Door ) Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC \"C\" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the \"C\" Channel using PVC solvent adhesive etc. completeas per direction of Engineer-in-charge, manufacturer\"s specification & drawing30 mm thick pre laminated PVC door shutters |
| 40 | (Fiber Door Frame) Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin- Charge. |
| 41 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWPgrade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in charge. (Payment of providing and fixing s.s handle, auto closing hinges 10% price already included of this rate) |
| 42 | (False Ceiling) Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge. |
| 43 | Bathroom ceiling Area |
| 44 | (Alluminum Window) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 45 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall bepaid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 46 | (Window Glass) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 47 | (Alluminum Latch) Providing and fixing ISi marked oxidised M.S/Aluminium door latches conforming to IS:5930 with screws etc. complete, 300x20x6 mm |
| 48 | (Tower Bolts) Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete . 300x10 mm |
| 49 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete . 150x10 mm |
| 50 | (Aluminium Hinges) Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete, 100x75x4 mm |
| 51 | (Aluminium Handle) Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete, 100 mm |
| 52 | (Door Closer) Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 53 | (Lock with Handle) Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete |
| 54 | (Door Stopper) Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 55 | (S.S Handle) Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm |
| 56 | (Malba ) Disposal of malba dump out ofthe campus, Charges of per round trolly |
| 57 | (Scaffolding) Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for therequired duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective ofduration of scaffolding. |
| 58 | (Roller blinds) Providing and fixing of roller blinds with branded quality. |
| 59 | (Waste pipe) Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe |
| 60 | (W.C ) Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. ISI marked (make - jaquar/ Hindware/Kohler) |
| 61 | (Basin Mixer) Providing and fixing of wash basin mixer ISI markedMake-Jaquar/Hindware/Johnson /Kohler |
| 62 | (Health faucet) Providing and fixing of Hand Shower (Health faucet) (ABS Body) with 8mm Dia, 1.2 Meter Long Spirochrome flex tube & Wall Hook ISI marked(Make - Jaquar / Hindware/Johnson/Kohler) |
| 63 | (Soap Dispenser) Providing and fixing of push button soap dispensers, capacity 0.8L, material ABS: Finish : white/smoked ISI marked (Make - Jaquar / Hindware/Johnson/Kohler) |
| 64 | (Mirror) Providing and fixing of Swivel Mirror 630 445 mmRectangular ShapeISI marked (Make - Jaquar / Hindware/Johnson/Kohler) |
| 65 | (Towel Rail) Providing and fixing of Single Towel Rail 450mm LongISI marked (Make - Jaquar / Hindware/Johnson/Kohler) |
| 66 | (Wash Basin) Providing and fixing pedistal wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-ISI marked (Make-Jaquar /Hindware/Johnson/Kohler) |
| 67 | (PVC Connection) Providing and fixing uplasticised PVC connection pipe with brass unions, 45 cm length, 15 mm nominal bore. ISI marked |
| 68 | 30 cm length,15 mm nominal bore |
| 69 | (Sensor Urinal) Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & postflushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. ISI marked (Make-Jaquar /Hindware/Johnson/Kohler) |
| 70 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter andembedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finishedsmooth.Granite Stone of approved shade |
| 71 | (CPVC Pipe) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(Make- Astral/other etc.) |
| 72 | (Brass Angle Valve) Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931ISI marked (Make-Jaquar /Hindware/Johnson/Kohler) |
| 73 | (2 in 1 Brass Angle Valve) Providing and fixing 2 in 1 C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931ISI marked (Make-Jaquar /Hindware/Johnson/Kohler) |
| 74 | (Miscellaneous Sanitory fitting) Providing and fixing.CPVC ball valve 20mm (06 Nos.)CPVC female elbow 20mm (20 Nos.)CPVC female tee 20mm (10 Nos.)CPVC socket/coupler 20mm (30 Nos.)CPVC plain tee 20mm (30 Nos.)CPVC plain elbow 20mm (40 Nos.)CPVC plug 15mm (24 Nos.)CPVC clip/shettle 25mm (30 Nos.)CPVC female socket 20mm (8 Nos.)CPVC male socket 20mm (8 Nos.)CPVC Solvent 1 kgTaflon Tap (20 Nos.)PVC Tee 110 mm (04 Nos.)PVC Elbow 110 mm (05 Nos.)PVC Socket 110 mm (05 Nos.)PVC Nani Trap 110 mm (05 Nos.)PVC Half set 110 mm (02 No.)PVC Pipe 110 mm (24 mtr).Solevent (500 gm) etc.C.P Brass Grating (s.s jali 100mm dia)Make- Astral/Prakash/Prince |
| 75 | (Stainless steel sink) Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. 610x460 mm bowl depth 200 mm |
| 76 | (Brass Long Body) Providing and fixing C.P. brass long body bib cock of approved qualityconforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 77 | (Electrical Work Start Here ) Providing & fixing of Split A/CMake: Voltas, Hitachi, LG |
| 78 | Providing & fixing of Light 36 w panel Make: Wiprow, Bajaj, Syska |
| 79 | Providing & fixing of 12 modular GI box, Make: Anchor, VIP, L&T Engem, with consealed work of chipping & cutting. |
| 80 | Providing & fixing of 12 modular switch plate Make: Anchor, ABB, CONA |
| 81 | Providing & fixing of Providing & fixing 6/16amp switch modular Make: Anchor, ABB, CONA |
| 82 | Providing & fixing of 6/16amp socket modular Make: Anchor, ABB, CONA |
| 83 | Providing & fixing of 6Amp Switch modular Make: Anchor, ABB, CONA |
| 84 | Providing & fixing of Digital projector wit screen Make: Epson, Zebronics, Samsung |
| 85 | Providing & fixing of Wire 2.5 sqmm Make Havells, RR Cabels, Polycab etc. (red+black+green) 60+60+60 mtr, with consealed work of chipping & cutting. |
| 86 | Providing & fixing of Wire 4.00 sqmm Make Havells, RR Cabels, Polycab etc. (red+black+green) 60+60+60 mtr with consealed work of chipping & cutting. |
| 87 | Providing & fixing of PVC conduit pipe 1\"\" Make: AKG, Finoplex, Astral with consealed work of chipping & cutting. |
| 88 | PVC Bend 25mm Make: AKG, Finoplex, Astral. |
| 89 | 25mm, 4 Way PVC Junction box Make : AKG, Finoplex, Astral |
| 90 | Providing & fixing of PVC Insulation tape |
| 91 | Providing & fixing of PVC clip for fixing |
| 92 | Providing & fixing of Wall Fan Make: Bajaj, Crompton, Usha |
| 93 | Providing & fixing of Exhaust 9 inchs Make: Usha, Crompton, Bajaj |
| 94 | Providing & fixingof 18W Tube light Make: Philips, Wiprow, Bajaj |
| 95 | Providing & fixing of Geyser 15 letermake :Bajaj, Crompton,Anchor |
