|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and not exc 1.5 m in depth and getting out in hard/dense soil , completeall as specified and directed by Engineer-in-charge. |
| 2 | Returning, filling in, including back filling, spreading, levelling, watering and well ramming in layers not exc 25 cm in Hard/Dense soil , completeall as specified and directed by Engineer-in-charge. |
| 3 | Removing excavated material to a distance n.exc 50m and depositing , completeall as specified and directed by Engineer-in-charge. |
| 4 | Material and labourfor mooram/red bajri filling in floor or pavings, laid in layers nexc 15 cm thick, spread , levelled and rammed including watering , completeall as specified and directed by Engineer-in-charge. |
| 5 | Material and labour for 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in fdn filling or mass concerete , completeall as specified and directed by Engineer-in-charge. |
| 6 | Material and labour for PCC 1:3:6 Type C1 20 mm graded crushed stone aggregate as in wall or retaining wall, any thickness, size or shape including pilasters buttresses columns, pillars boundary pillars andposts (including caps and bases) , completeall as specified and directed by Engineer-in-charge. |
| 7 | Material and labour for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc, verical or to batter, work in rough finished flat surfaces of concrete , completeall as specified and directed by Engineer-in-charge. |
| 8 | Supply and fixing for PVC (SWR) pipes single socketed, in any length of 110mm bore with rubber ring joints, laid in walls , completeall as specified and directed by Engineer-in-charge. |
| 9 | Material and labour for broken stone or boulders hand packing ( any thickness), at back of walls over arches etc and raising (or lowering) to the required level, completeall as specified and directed by Engineer-in-charge. |
| 10 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exc 5o m and making good surface, work in soft disintergreted rock , completeall as specified and directed by Engineer-in-charge. |
| 11 | Supply and fixing for Fe 410-w(Gde E 250)quality B rolled mild steel in roof trusses (framed) trussed, purlins, crane gantries, rails and framing (beam, tee, angle, channel or flat sections) including distance pieaces cleats etc , completeall as specified and directed by Engineer-in-charge. |
| 12 | Supply and fixing for MS plates plain or chequered square cut or notched forming holes drilled or welded any thicness , completeall as specified and directed by Engineer-in-charge. |
| 13 | Material and labour for Painting to steel surfaces with two coat of synthetic enamal paint over one coat of redoxide primer, completeall as specified and directed by Engineer-in-charge. |
| 14 | Supply and fixing for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 , completeall as specified and directed by Engineer-in-charge. |
| 15 | Supply and fixing for 0.63mm thick galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 , completeall as specified and directed by Engineer-in-charge. |
| 16 | Supply and fixing for Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws, completeall as specified and directed by Engineer-in-charge. |
| 17 | Supply and fixing for Pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.5 mm thick of an colour having strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws , completeall as specified and directed by Engineer-in-charge. |
| 18 | Material and labour for submain wiring with two runs of single core multi stranded PVC insulated FRLS flexible copper conductor cable of size 1.5 sqmm and one run of single core multi stranded PVC insulated FRLS flexible copper conductor cable green colour of size 1.5 Sqmm as earth lead in & includingnon metallic PVC conduit medium grade in surface with all conduit accessores and junction boxes, plastic, round, four terminals, completeall as specified and directed by Engineer-in-charge. |
| 19 | Material and labour for ceiling rose surface bakelite 3 terminals PVC/polycarbonate, isolated body , completeall as specified and directed by Engineer-in-charge. |
| 20 | Supply and fixing for decorative ultra slim LED tube light fitting with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver of 20/22watt (4\") in and including 20/22 watt LED tube rod complete withall accessories prewiredand connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core , completeall as specified and directed by Engineer-in-charge. |
| 21 | Supply and fixing for sheet metal enclosure MCB distribution board. Single pole & neutral 240 V, 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link , completeall as specified and directed by Engineer-in-charge. |
| 22 | Supply and fixing for Sheet metal enclosure MCB distribution board. Single pole & neutral 240 V 2 way complete with IP-43 IK-09 protection complete with appropriate size , completeall as specified and directed by Engineer-in-charge. |
| 23 | Supply and fixing for MCB SP 240 volt 6to 32 A,10 kAbreaking capacity having C-curve characteristics connected with suitable lugs , completeall as specified and directed by Engineer-in-charge. |
| 24 | All as per item No 23.00 here-in-before but SPN 16-32 Amps , completeall as specified and directed by Engineer-in-charge. |
| 25 | Supply , fixing and laying of DWC pipe of size 50/38 mm dia (outer dia) with coupler including passing the LT Cables of size 16-70 sqmm through the DWC pipe for protection of cable , completeall as specified and directed by Engineer-in-charge. |
| 26 | Supply and fixing for 1100 volts grade heavy duty cable PVC insulated Aluminium staranded conductor , served with inner sheathed PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 01 mtrs apart including 4mm suspention wire one twin core flat/circular cable of size 6 sqmm x 2 core , completeall as specified and directed by Engineer-in-charge. |
| 27 | Supply, layingtesting and connecting cable of size 25 Sqmm, 4 Core XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade laid in trenches/ducts/wall or through pipe with suitable size of cable glands, crimping type cable lugs , completeall as specified and directed by Engineer-in-charge. |
| 28 | Material and labour for tubing GI light grade 40 mm bore laid in trenches, ducts, floor for protection of cable,fixed to wall or poles including fixing arrangement,completeall as specified and directed by Engineer-in-charge. |
| 29 | Material and labour for clamps, bracing, supports and back plates made out of structural steel section including nuts, bolts and washers all as required at site for fixing GI tubing in truly vertical position including two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed. |
| 30 | Supply and fixing for FRP pole junction looping box with MCB SPN 6 amps & provision of 4 Nos copper bus bar of required size for 3 phase 4 wire cable connections with suitable size FI clamps for fixing to pole complete with necessary nuts & bolts etc , completeall as specified and directed by Engineer-in-charge. |
| 31 | Supply and fixing for time switches astro type (having longitude and latitude of Indian cities in memory) 250 V single phase of 20 Amp rating with contactor fitted inside sheet steel enclosure , completeall as specified and directed by Engineer-in-charge. |
| 32 | Supply and fixing for Heat shrink joint indoor/outdoor LT 1100 volts grade 25-50 sqmm, 4 core , completeall as specified and directed by Engineer-in-charge. |
| 33 | Supply and fixing for Heat shrink joint indoor/outdoor LT 1100 volts grade 70-120 sqmm, 4 core , completeall as specified and directed by Engineer-in-charge. |
| 34 | Supply and fixing for LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection , completeall as specified and directed by Engineer-in-charge. |
