|
| 1 | Clearing Compound premises of shrubs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be neccessary).(Payment to be made on area cleaClearing Compound premises of shrubs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be neccessary).(Payment to be made on area cleared) |
| 2 | Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in-charge.a) 3.90 metre height. |
| 3 | (i) Labor Charges for shifting up to 19th shifting |
| 4 | (b)Extra for additional 3.6 m height or part thereof. |
| 5 | (i) Labor Charges for shifting up to 19th shifting |
| 6 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 7 | Uprooting and removing plants from the surface of walls parapet etc and making good damages. Repairing of damages to be paid separately.(a) Small plant of girth of exposed stem upto 75 mm. lift upto 6 mtr. |
| 8 | Brick work with 1st class bricks in cement mortar (4:1)a)In foundation & plinth |
| 9 | Plaster (to wall, floor, celling etc.)with sand and cement mortar including roundaing of or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (G Floor). (excluding cost of chipping over concrect surface ) (a) With (4:1) cement mortar.20 mm thick plaster |
| 10 | Neat cement punning average 1.5 mm thick in wall, dado, window sill, floor, drain etc.Note : Cement 0.152 m3/%m2 |
| 11 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(a) Grill weighing above 16Kg/m2 and above |
| 12 | Reparing collapsible gate by cutting out all rivets as necessary re-assambling all members including welding pieces of channels, sraightening bent bars and rivetting with new rivets and fitting in positionand painting two coats. |
| 13 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(a) Sal : Siliguri. |
| 14 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be madei) 35mm thick shutters with 19mm thickpanel of size 30to 45 Cm.a) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak |
| 15 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(a) 50mm. X 40mm. X 2.5mm. |
| 16 | (b) 75mm. X 60mm. X 3.15mm. |
| 17 | Taking out old brass hinges and fitting, fixing the same with new brass screws.(a) 50mm. Long butt hinge. |
| 18 | b) 75mm. Long butt hinge. |
| 19 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.a) 600 mm long |
| 20 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.a) 1050 mm long |
| 21 | Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 22 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen / M-Seal etc) complete.(a) Pipes(i) 110 mm Dia. |
| 23 | Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. |
| 24 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 25 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 26 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :(i) Two coats (with any shade except white) |
| 27 | b) On steel or other metal surface :with Super gloss (high gloss)(i) Two coats (with any shade except white) |
| 28 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC.(I) In ground Floor : (a) Two Coats |
| 29 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.(i) Premium 100% Acrylic Emulsion A) In ground floor (two Coats) |
| 30 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)i) 3 mm thick (weighing 7.4 kg/Sq.m) |
| 31 | Cleaning IPWC with Acid. |
| 32 | Cleaning EP or Anglo-Indian WC with Acid. |
| 33 | Cleaning Urinal with Channel with acid |
| 34 | Cleaning and polishing marbel or mosaic portion includingremoving stains. |
| 35 | Supply of daily labour[ Male Mazdur] for swipping. |
| 36 | Supplying P.V.C. water storage tank of approve quality with closed top with lid (Black) - Multilayer.(a) 1000 Lite capacity |
| 37 | Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity(a) Upto 1st story from GL |
| 38 | (b) Extra for each additional story. |
| 39 | Supplying, fitting and fixing PVC pipes of approved make ofSchedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia)(i) 20 mm dia. |
| 40 | (ii) 25 mm dia. |
| 41 | Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.(c) Upto 50 users:-(i) Within a lead of 150 metre |
| 42 | Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc.etc.from road side masonary drain/ hume pipe drain/ culvert etc. by mathor labour after removing concrete.Slab/manhole cover etc.without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc.etc.by using iron pans,buckets including all labour, tools & plants including removing the spoils in dry condition and disposing the same by truck beyond the road side in conformity with municipal/corporation rules for such disposal including loading into truck and cleaning the road side in all respects as per direction of the Engineerin-Charge. |
| 43 | Add GST @ 18 % over Sl No 1 to 34 |
| 44 | Add LWC @ 1 % over Sl No 1 to 35 |
