|
| 1 | SCHEDULE \"A\" PART-I [ B/R WORKS] |
| 2 | Dismantlingof ceiling board (fibre, pulp, insulation, etc) for false ceiling any thickness, including cover fillets. |
| 3 | S & F in repair powder coated anodised aluminium snap grid frame size of grid 605 x 605 mm frame work for false ceiling all as specified. |
| 4 | S & F in repair Hangers 6mm dia G.I (Upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleatsmade out of G.I flat 40 x 3 mm size 60 mm long complete all as per specified. |
| 5 | Material and labour in repair for12 mm thick Gypsum board in ceiling fixed with screw to frame work complete all as specified and directed. |
| 6 | Demolition of cement concrete in ground floors and pavings n.exc 15 Cm thickness and removing the debris from the site exc 1.5 km but not exc 5km and deposition where directed |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not back-ing), and removal of debris from the site and depositing where directed |
| 8 | M&L25 mm thick Plain cement concrete type B-1,1:2:4 (20mm grade aggregate) used in sub base complete all as specified and directed. |
| 9 | M & L coloured joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchincludingscreed bed 15mm thick in cement mortar 1:4 etc complete all as specified and directed. |
| 10 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polishedarea of each tile n.exc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match includingscreed bed 15 mm thick in cement mortar 1:4 etc complete all as specified. |
| 11 | All as per item No 9.00 above but on Skirting/dado over 10 mm thick back coat in CM 1:3 complete all as specified and directed. |
| 12 | All as per item No 10.00 above but on Skirting/dado over 10 mm thick back coat in CM 1:3 complete all as specified and directed. |
| 13 | Dismantling Plain or corrugated steel sheeting, any guage, thickness, including nainital or similar pattern roof coveringscomplete all as specified and directed. |
| 14 | S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 16 | S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 17 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 18 | Fixing only Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 19 | S& F for wind ties for roof including securing bolt,including all necessary drilling,bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 20 | Taking down steel windows exc 1.5 sqm but n exc 4 sqm complete all as specified and directed. |
| 21 | Taking down and refixing of steel windows exc 1.5 sqm but n exc 4 sqm in same opening and making good the damaged surface with the final finish as per existing complete all as specified and directed. |
| 22 | Taking down steel ventilators with shutters n exc 1.5 sqmcomplete all as specified and directed. |
| 23 | Taking down and refixing of steel windows n exc 1.5 sqm in same opening and making good the damaged surface with the final finish as per existing complete all as specified and directed. |
| 24 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed. |
| 25 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqmcomplete all as specified and directed. |
| 26 | S & F solid prelam PVC door frame of size 50 mm x 47 mm made out of 5 mm prelam colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 27 | S & F factory made solid prelam PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face and 2 mm plain colour PVC sheet on back face complete all as specified and directed. |
| 28 | S & F 100 mm long butt hinges medium weight cold rolled complete all as specified and directed. |
| 29 | S & F 150 mm long aluminium anodised barrel tower bolts complete all as specified and directed. |
| 30 | S & F 150 mm long aluminium anodised handle cast type complete all as specified and directed. |
| 31 | S & F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 32 | Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed. |
| 33 | Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No)etc. complete all as specified and as directed |
| 34 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 35 | S&F 5.5 mm thick sheet glass ordinary quality and glazing with rubber beading exc 0.5 Sqm each panel complete all as specified. |
| 36 | S&F 5.5 mm thick sheet glass ordinary quality and glazing with rubber beading n exc 0.5 Sqm each panel complete all as specified. |
| 37 | S&F 5 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each panel complete all as specified. |
| 38 | S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. |
| 39 | S&F solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including removal of existing complete all as specified and directed. |
| 40 | M&L Preparation of old decorated /new plastered surfaces of wallby complete removing of existing treatment by using Vacuum based sanding machine and applyingtwo coats Oil bound distemper incl applying with 3 mm thick wall care Putty over a coat ofprimer of surfaces filing or cracks, holes on wall by putty etc by using mechanical tool/auto rollerand as per manufacturer instruction complete all as specified and directed.Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from GE. Contractor should submit Auth applicator certificate before execution of work. |
| 41 | Material and labour for preparation of old decorated/ new plastered surfaces of walls bybrooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent walls and trading oil and greasy spots and applyingfor one coat of white washby using mechanical tool/auto roller complete all as specified and as directed by Engr-in-charge. |
| 42 | Material and labour for one coat of synthetic enamel painting on old painted steel surfaces of any description, not otherwise described over 10cm width or girth including preparation by using mechanical tool/auto roller complete all as specified and as directed by Engr-in-charge. |
| 43 | Material and labour for preparation of old decorated surfaces of ceiling bybrooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent walls and trading oil and greasy spots and applyingfor one coat of white wash complete all as specified and as directed by Engr-in-charge. |
| 44 | Material and labour for one coat of synthetic enamel painting on old painted wooden surfaces of any description, not otherwise described over 10cm width or girth including preparationby using mechanical tool/auto roller complete all as specified and as directed by Engr-in-charge. |
| 45 | Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc complete all as specified and as directed |
| 46 | M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4 complete all as specified and as directed |
| 47 | M & L for Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations complete all as specified and as directed |
| 48 | Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework complete all as specified and as directed by Engr-in-charge. |
| 49 | Material and labour for old size brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 50 | S & F in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed |
| 51 | S & F in repairs vitreous china urinal partition slabs white of size 310 x 770 mm terminating about 40 cmabove floor line, fixed complete all as specified and as directed |
| 52 | Supply and fix in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge. |
| 53 | Supply and fix in repairs vitreous china wash down water closet pedestal pattern white including trap connections to drain and to flush pipe anti-syphonic pipe etc., complete all as specified and as directed by Engr-in-charge. |
| 54 | Supply and fix in repairs PVC valveless, syphonic action, flushing cistern low level 10 ltrs capacity, white with inlet ball valve float and handle including brackets and flush pipe of polyethylene of low or high quailty PVC 32mm dia complete all as specified and as directed by Engr-in-charge. |
| 55 | S & F 32 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. |
| 56 | Supply and fix in repairs PVC connection 15mm size PTMT nuts length 450mm complete all as specified and as directed by Engr-in-charge. |
| 57 | Taking up or down 15mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge. |
| 58 | Taking up or down 25mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge. |
| 59 | Supplying and laying of 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including clamping to walls complete all as specified. |
| 60 | Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including clamping to walls complete all as specified. |
| 61 | Supply and fix in repairs Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterflyhandle conforming to ISscrewed down, screwedfor iron pipes or for brass ferrule complete all as specified and as directed.Make:- Cat No.PIS-06 of Prayag or Cat No.CON-037KN of Jaquar or T1805C of HR Johnson or G1404A1 of Parryware or equivalent as specified in list of make as approved by GE |
| 62 | Supply and fix in repairs Angular stop cock 15mm bore, brass, chromium plated, fancy type conforming to ISscrewed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.Make:- Cat No.PIS-10 of Prayag or Cat No.CON-053KN of Jaquar or T1810C of HR Johnson or G3053A1 of Parryware or equivalent as specified in list of make as approved by GE |
| 63 | Supply and fix in repairs Pillar tap 15 mm bore, brass with capstan heads, chromium plated, fancy type, long Neck with aerator conforming to, screwed down high pressure with long screwed shanks and fly nuts, screwedfor iron pipes or for brass ferrule etc., complete all as specified and as directed.Make:-Cat No.PIS-02 of Prayag or Cat No.CON-021KN of Jaquar or T1603C of HR Johnson or G2402A1 of Parryware or equivalent as specified in list of make as approved by GE |
| 64 | Supply and fix in repairs 19mm dia curtain rails, anodised aluminium alloy with fixing brackets, stops rollers etc., complete all as specified and as directed by Engr-in-charge. |
| 65 | Supply and fix as in repairs tubular towel rail brass chromium plated, 20mm dia D type, 60cm long between flanges complete allas specified and as directed. |
| 66 | Supply and fix in repairs health faucet (hand shower) with 1.0metre long tube with wall hook, chromium platedcomplete all as specified and as directed.Make:- Cat No.BEA-101 of Prayag or CatNo.ALD-563 of Jaquar or O0426C of HR Johnson or T9961A1 of Parryware or equivalent as specified in list of make as approved by GE |
| 67 | S & F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or I floorscomplete all as specified and as directed. |
| 68 | S & F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches orfloorscomplete all as specified and as directed. |
| 69 | Dismantling and breakingup drain pipes AC /CI /PVC Pipes set in cement mortar 100mm/75mmbore complete all as specified and as directed. |
| 70 | S & F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wallscomplete all as specified and as directed. |
| 71 | S & F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floorscomplete all as specified and as directed. |
| 72 | S & F PVC (SWR) bends 110 mmcomplete all as specified and as directed. |
| 73 | S & F PVC (SWR) bends with access door 110 mmcomplete all as specified and as directed. |
| 74 | S & F PVC (SWR) bends 75 mmcomplete all as specified and as directed. |
| 75 | S & F PVC (SWR) bends with access door 75 mmcomplete all as specified and as directed. |
| 76 | S & F PVC (SWR) 75 mm Floor trap, plain with stainless steel grating including jointing with solvent cementcomplete all as specified and as directed. |
| 77 | S & F PVC (SWR) 75 mm multi Floor trap, plain with stainless steel grating including jointing with solvent cementcomplete all as specified and as directed. |
| 78 | M & L for Gun metal globe or gate valves with iron wheel head, screwed both ends for pipe and fixed of size 25 mm dia complete all as specified and as directed. |
| 79 | S & F 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and as directed. |
| 80 | Material and labour for repairs 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed in pelmet box with nails to timber frame work complete all as specified and as directed by Engr-in-charge. |
| 81 | S&F 6 mm thick teak wood lipping to 12 mm thick particle board complete all as specified and as directed |
| 82 | S&F in repair preliminated particle board of 18/19mm, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw to timber frame work,complete all as specified. |
| 83 | S&F 6 mm thick teak wood lipping to 18/19 mm thick particle board complete all as specified and as directed |
| 84 | S & F in repairs double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting and making good to floor as per existing complete all as specified and directed. |
| 85 | S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified & directed. |
| 86 | Taking down and refixing of Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 87 | Material and labour preparation of old wooden surfaces, staining with spirit and applying one coat of varnish on old wooden surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed by Engr-in-charge. |
| 88 | S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed |
| 89 | Taking down cement plaster or concrete etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 90 | M&L 10 mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6 including finishing even and smooth without extra cement complete all as specified and as directed |
| 91 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed |
| 92 | M & L for clean sawn timber fixed Second class hard-wood in scantlings complete all as specified and as directed |
| 93 | Material and labour preparation of new wooden surfaces and applying two coat of varnish over a filler coat on wooden surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed by Engr-in-charge. |
| 94 | M& L for terrace waterproofing preparation ,provision and applying polyurethane waterproofing membrane coating system comprising the followings:(a) Cleaning mechanically the surface clean and free from any bituminous residue dirt,oil,grease undulations,troughts etc, including surface cracks etc filled with high performance rapid setting , high early strength , shrinkage compensated repair concrete , all complete as per the manufactures specification.(b) Providing & applying PU primer @ 200ml per sqm or equivalent as approved by GE and then applying two coats of two component,moisture cure highly elastomeric & tough polyurethane waterproofing membarance PU @1.5kg per sqm in two coats to achieve dry film thickness of 1.07 mm having tensile strength > 6MPa & elongation of600% providing unmatched crack bridging abilities and solid content of 98% . complete all as per the manufactures specification.(c) On completion of waterproofing application ,providing and fix 200gsm non woven polypropylene geo textile memrane with over lap of minimum 50mm as protective medium before screed concrete or land scaping works(Make: Nitoproof 650 PU of FOSROC or equivalent as mentioned in list of make as approved by GE) |
| 95 | M&L for providing ,cement concreteB-0 1:2:4 (12.5mm graded aggregate)and50mm thickness admixed with Bostik LW or equivalent as mentioned in list of make approved by GE @ 200ml per bag 50kg cement as per manufacture instruction as the make approved by GE, on the cured waterproofing membrance to protect the waterproofing coating system from any damage complete all as specified and directed by Engineer-in-ChargeMake:- Bostik or equivalent as mentioned in list of make as approved by GE |
| 96 | M &L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 including finishing even and smooth without extra cement complete all as specified and as directed. |
| 97 | M&L rendering 15mm thick cum 1:3 on top of the chaijah with water proofing compund including coping and proper slope and incl necessary cutting and making good and finished the surface even & smooth without using extra cement complete all as specified and as directed. |
| 98 | Fixing only PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore.(Except Pipes) complete all as specified and as directed. |
| 99 | Fixing only PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore.(Except Pipes) complete all as specified and as directed. |
| 100 | S&F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and as directed. |
| 101 | S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and as directed. |
| 102 | S&F 75mm PVC (SWR) vent cowl complete all as specified and as directed. |
| 103 | S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed. |
| 104 | Fixing Only tubes any grade galvanised with all fittings fixed complete to walls and ceiling or laid in floors 15mm bore complete all as specified and as directed. |
| 105 | Fixing Only tubes any grade galvanised with all fittings fixed complete to walls and ceiling or laid in floors 20mm bore complete all as specified and as directed. |
| 106 | S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia including cutting /chasing in walls etc. complete all as specified and as directed. |
| 107 | S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm dia including cutting /chasing in walls etc complete all as specified and as directed. |
| 108 | M&L for removing of Bushes/small trees from walls, over roof slabs etc including from root level and using chemical and filling the same with cement mortar in CM 1:4, and applying 2 coats of weather coat paint over a coat of primer over and including wall care puttyetcby using mechanical tool/auto roller complete all as specified and directed. |
| 109 | M&Lfor preparation of new plastered surface by Vacuum based sanding machine and applying two coats of anti algea weather proof emulsion high performance exterior wall finish over and including priming coat of exterior primer over 2mm thick wall care putty etc by using mechanical tool/auto roller and as per manufacturer instruction complete all as specified and directed.Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from GE. Contractor should submit Auth applicator certificate before execution of work. |
| 110 | M&L for complete removal of existing old treatment of any description with mechanical equipment and preparation of oldsurfacesby washing rubbing downby Vacuum based sanding machineand applying two coats of anti algea weather proof emulsion high performance exterior wall finish over and including priming coat of exterior primer on 2mm thick wall care putty etcby using mechanical tool/auto roller and as per manufacturer instruction complete all as specified and directed.Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from GE. Contractor should submit Auth applicator certificate before execution of work. |
| 111 | Taking downofaluminium partition incl frame exc 2 sqm in same each complete all as specified and directed. |
| 112 | S&F powder coated aluminium fixedpartition of approved design, aluminium frame work with 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed including aluminium beading & rubber packing for fixing glass, area of each panel not exc 1.20 Sqm complete all as specified and as directed. |
| 113 | SCHEDULE \"A\" PART-II [ E/M WORKS] |
| 114 | Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures, PVC conduits and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials from wall/ceiling etc to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed. |
| 115 | Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into existingconcealedconduitthrough Wall/Ceiling/Flore along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly and including 2 mm thick terminal boxes MS sheet flush mounted with 3 mm thick laminated hylem sheet fixed with camium plated iron screwsfor mountling switches, socket, fan regulators etc complete for for the following point wiring and making good disturbed surfaces matching with existing paint complete all as specified and as directed. |
| 116 | One light point controlled by one switch with cable 1.5 Sqmm size. |
| 117 | One fan point controlled by one switch with cable 1.5 Sqmm size. |
| 118 | One exhaust fan point controlled by one switch with cable 1.5 Sqmm size. |
| 119 | One 3 pin socket outlet 5 Amps, independentboardwith cables 1.5 Sqmm size. |
| 120 | All as per item ser no-115 above here in before but one 5 pin socket outlet 5/15 Amps, indipendentboardwith cables 4.0 Sqmm size. |
| 121 | Material and labour for Sub main wiring with Two run single core 2.5 sqmm for phase and neutral and one run single core 2.5 sqmm ass earth wire (ie 3 X 2.5 Sq mm) with multi stranded copper conductorPVC insulated unsheathed FRLS cable 1100 volts grade confirming to IS-694 continuity conductor drawn into and including non-metallic rigid PVC conduit 20 mm dia in surface/concealed/PVCwiring through wall/ceiling/floor/roof etc including conduit accessories including taking down old sub main wiring with PVC conduit and taken as credit complete all as specified and as directed.Notes: (i) The disturbed surfaces shall be made good with existing surface including finishes as applicale.(ii) Cutting chases for concealed wiring shall be measured and paid seperately (ii) Two different color wires shall be used for phase and neutral . (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles .(iv) Three run of 2.5 Sqmm cable, and one run of PVC conduit will be measured as one unit. |
| 122 | All as per item Ser No. 117 above here in before but Two run single core 6 sqmm for phase and neutral and one run single core 6 sqmm as earth wire (ie 3 X 6 Sq mm) complete all as specified and as directed. |
| 123 | All as per item Ser No. 117 above here in before but Four run single core 6 sqmm for phase and neutral and two run single core 6 sqmm as earth wire (ie 6 X 6 Sq mm) with minimum 25mm dia PVC conduit complete all as specified and as directed. |
| 124 | All as per item Ser No. 117 above here in before but Four run single core 10 sqmm for phase and neutral and two run single core 10 sqmm as earth wire (ie 6 X 10 Sq mm)with minimum 25mm dia PVC conduitcomplete all as specified and as directed. |
| 125 | S & F switch piano flush type single pole one way 5 ampscomplete all as specified and as directed. |
| 126 | S & F switch socket combination 2 in 1, 3 pin 5 amps flush type complete all as specified and as directed. |
| 127 | S & F switch socket combination 2 in 1, 3 pin 5 and 15 amps flush type universal complete all as specified and as directed. |
| 128 | S&F Ceiling rose three terminals/ PVC/ polycarbonate, isolated bodycomplete all as specified and as directed by Engr-in-Charge. |
| 129 | S & F stepped type electronic fan regulator flush type on the existing phenoic laminated sheet etc complete all as specified and as directed |
| 130 | Supply and fix high efficiency Wall mounted LED light fitting 4 feet white, 18/20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed. |
| 131 | Supply and fix high efficiency Wall mounted LED light fitting 2 feet white, 9/10W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed. |
| 132 | Supply and Fixhigh efficiency modern 24 W 2 x 2 ft recess mount LED lights with panel for recessed dust free installation with high brightness LED for glare free homogenous illumination and suitable for ceiling cut out 600x 600mm including taking down old one and taken as credit complete all as specified and as directed. |
| 133 | Supply and Fix PVC modular MCB enclosure single pole and netural with a two pin and earth plug and socketcomplete with one SP MCB 16-32 Amps including taking down old one complete all as specified and as directed. |
| 134 | S&F sheet metal enclosure VTPN MCCB DB 4 way double door with spreader terminals,insulating phase barrier and hardware, having IP 43 and IK 09 protection with neccesary arrangements Including taking down old u/s DB, MCCB and MCB\"s all as specified and directed.Note:- MCCB, MCB shall be measured and paid seperately under respective item of schedule. |
| 135 | S&F sheet metal enclosure VTPN MCCB DB 8 way double door with spreader terminals,insulating phase barrier and hardware, having IP 43 and IK 09 protection with neccesary arrangements Including taking down old u/s DB, MCCB and MCB\"s all as specified and directed.Note:- MCCB, MCB shall be measured and paid seperately under respective item of schedule. |
| 136 | S&F DB for MCB SPN 8 waydouble door DB with 200 amps rated copper bus barin SS enclosure double door type having IP 43 and IK 09 protection Including taking down old u/s DB and MCB\"s all as specified and directed . Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule. |
| 137 | Supply and fix for MCB SPN 230 V, 40 Amps with breaking capacity 10KA C curve Including taking down old unserviceable complete all as specified and as directed by Engr-in-charge. |
| 138 | Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve Including taking down old unserviceable complete all as specified and as directed by Engr-in-charge. |
| 139 | M&L for Cutting chases on brick walls concrete surfaces not exc10cm girth and making good in cement mortar (1:3) the existing surfaceafter carryiing out the concealed wiring including necessary finishesall as directedby Engr in charge. |
| 140 | M&L for MS chequered plate of thickness not less than 5mm and area as per site requirement size to cover cable duct opening including repairing work to edges of duct with appropriate PCC to place MS chequered plate equally on the duct in the installation complete including painting with two coat synthetic enamel paint of approved tint over a coat of red oxide primer and taking out the broken PCC duct cover complete all as specified and directed. |
| 141 | Supply and fix on pole/wall buried in ground fixed to wall on battern or recess or chase or buried in ground or drawn in conduit/ pipe earth continuity conductor copper earth strip 32 x 6 mm complete all as specified and as directed |
| 142 | Supply and fix aluminium powder coated double deflection adjustable (open and close type) type supply air grill/ diffusers with MS volume controldampers and aluminimum powder coated fixed bar type return air grill/ diffusers as required without volume control damper for return air complete all as specified and as directed |
| 143 | Material and labour for Earthing complete with using copper earth plate electrode of size 600mm x 600mm x 3.15 mm thick buried directly underground vertically (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate at a depth not less than 1.5m below ground level connected with and incl copper strip 32x6 mm including 40 mm dia GI pipe light grade by means of nuts bolts, washers and copper earth strip protected by GI pipe light grade 40 mm bore up to 7.5 mtras per site requirement including necessary earth work in any type of soil PCC (1:3:6) type C1 chamber and RCC(1:2:4)type B-1cover and watering pipe 20 mm dia medium grade with funnel complete with mesh , refiling with alternate 5 layer of charcoal (200kg) & salt crystal (200kg) and top two inches layer with back filling compound(100kg) all as specified. Note for Earthing work:- Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, reinforcement removal of surplus soil , site clearance etc. (ii) Copper earth strip , GI Pipe 40 mm light grade 7.5 mtr and GI Pipe 20 mm medium grade 1.50 mtr deemed to be included the rate quoted by the contractor.(iii) Beyond 7.5 M the copper earth strip & GI pipe light grade 40 mm dia shall be measured and paid separetely under the respective item of the schedule (iv) Quotated rate include testing after completion from test point and the desired earth resistance shall be not more than 1 ohm .If the desired result is not obtainedthe earthing will be re done by the contractor at no extra cost. |
| 144 | Material and labour for Earthing complete with using galvanised steel earth plate electrode60cm×60cm× 6mm thick buried directly underground vertically (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate at a depth not less than 1.5m below ground level connected with and incl 4 mm GI wire including 15 mm dia GI pipe light grade by means of nuts bolts, washers and GI wire protected by GI pipe light gradev 15 mm bore up to 7.5 mtr as per site requirement including necessary earth work in any type of soil PCC (1:3:6) type C1 chamber and RCC(1:2:4)type B-1cover and watering pipe 20 mm dia medium grade with funnel complete with mesh , refiling with with alternate 5 layer of charcoal (200kg) & salt crystal (200kg) and top two inches layer with back filling compound(100kg) all as specified. Note for Earthing work:- Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, reinforcement removal of surplus soil , site clearance etc. (ii) Copper earth strip , GI Pipe 15 mm light grade 7.5 mtr and GI Pipe 20 mm medium grade 1.50 mtr deemed to be included the rate quoted by the contractor.(iii) Beyond 7.5 M the GI wire & GI pipe light grade 40 mm dia shall be measured and paid separetely under the respective item of the schedule (iv) Quotated rate include testing after completion from test point and the desired earth resistance shall be not more than 2 ohm .If the desired result is not obtainedthe earthing will be re done by the contractor at no extra cost. |
| 145 | Supply & fixing of GI wire 4mm dia complete all as specified and directed. |
| 146 | Supply and erect stainless steel cable trunking not less than 150mm (depth), 150mm (width) with 2mm (thick) made up of stainless steel with coupler plates tee horizontal bend vertical etc with necessary arrangements to fix on wall/floor as per site requirement complete all as specified and as directed. |
| 147 | Taking down and refixing heat and smoke detector included the charges of tools and plants etc as per site requirements complete all as specified and directed. |
| 148 | Taking down exhaust fans from wall of any make and sweep by disconnecting complete for repairs all as specified and as directed. |
| 149 | Fixing only exhaust fan after repair of any make and sweep by connecting with 3 core copper flexible round cable from ceiling rose to fan complete all as specified and directed.Note:- Copper wire will be measured and paid separately as supply only under relevant items. |
| 150 | M & L for rewinding of burnt out exhaust fan 300mm sweep motor with super enameled copper winding wire of suitable gauge/ size including necessary tapping varnishing etc including taking down burnt copper winding and necessary transportation to workshop and back testing complete all as specified and directed. |
| 151 | Supply and fix for MCCB 4 Pole, 415 V,adjustable Thermal &Fixed Magnetic setting typetype 63/100 Amps with breaking capacity 25 KA Including taking down old unserviceable complete all as specified and as directed by Engr-in-charge. |
| 152 | Supply and fix for MCCB 4 Pole, 415 V,adjustable Thermal &Fixed Magnetic setting typetype 150/160 Amps with breaking capacity 25 KA Including taking down old unserviceable complete all as specified and as directed by Engr-in-charge. |
| 153 | Schedule of credit amount brought back from Ser Page No.40- Rs. 94,921.00 will be deducted from the above quoted amount to derive the contract sum. SIGNATURE OF CONTRACTOR |
