Tender For Open Gym Goods Supply, falna-Rajasthan

Open Gym Goods Supply , Back Extension Dimension :-1400 Mm (Length) X 700 Mm (Width) X 820 Mm (Height) Safe Area :- 2.4 Mtr. X 1.7 Mtr. Back Extensionequipment Made Form C G.I. Pipe Of Different N.B. Pipe (Nb Stands For Nominal Bore Le. Internal Diameter Of Pipe In Mm) The Main Frame In Of 50 Mm Nb Made Form C Class G.I. Pipe. The Foot Resting Frame Of 32 Mm Nb Made Form C Class G.I. Pipe. The Handle Frame Is Of 25 Nb Made Form C Class G.I. Pipe. The Seat Fitted On The Outer Frames Is Made Up Of M.S. Sheet Of Size 330 M.M X 2 M.M Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. The Foundation Used For Fixing Is Consists Of 50 Mm Nb Made Form C Class G.I. Pipe. The Footrests Are Made Form Casted Aluminum Material, Having Sizes 130 X 310 X 5 Mm Thick. With The Support Of 250 Mm X 115 Mm X 3 Mm Thick. Ms Plate. The Powder Coating Done With Pure Polyester Powder Of Ackzonoble Of Breger With 60 To 70 Micron Thickness. , Double Standing Twister Dimensions :- 1500 Mm (Length) X 600 Mm (Width) X 1300 Mms (Height.) Safe Area :- 2.5 Mtr. X 1.5 Mts. Double Standing Twister Equipment Made Form C Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Milimeters. The Center Pipe In Of 100 Nb Made From C Class G.I. Material. The Bottom Welded With Support Of M.S. Round Plate Of 250 Mm & 10 Mm Thickness. The Bottom Frame Is Of 32 Nb Made From C Class G.I. Pipe. The Handle Frame Is Of 25 Nb Made Form C Class G.I. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb C Class Weided With M.S. Round Plate Of 250 Mm & 10 Mm Thick. Main Pipe Supported With 25 Mm X 25 Mm M.S. Angles Of 3 Mm Thickness And 20 Mm X 40 Mm Crc. Square Pipes Of 3 Mm Thickness. The Twister Plate Fitted On The Bottom Frame Is Made Up To M.S. Round Plate Of Size 300 Mm And 10 Mm Thick. Closing Caps Are Made Up To High Quality Fiber Reinforced Plastic Material. Pins Used Of Diameter 35 Mm Are Made Up Form Sae 8620 Bright Material. The Bearing Used Are Of 6205 Zz Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nuts And Bolts Are Used For Assembly. The Powder Coating Done With Pure Polyster Powders From Ackzonable Of Breger Paints With 60 To 70 Micron Thickness. , Cycle Dimensions :- 1570 Mm (Length) X 570 Mm (Width) X 900 Mm (Height) Safe Area :- 2.5 Mtr. X 1.5 Mtr. Cycle Equipment Made From C Class G.I. Pipe Of Different N.B. (Nb Stands For Nominal. Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. ) The Main Frame Of 50 Nb Made Form C Class G.I. Pipe M.S. Round Plate Of 300 Mm X 10 Mm Thickness Used To Form A Paddle Assembly. The Handle Frame Is Of 25 Nb Made From C Class G.I. Pipe, The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330 Mm X 300 Mm X 2 Mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. For Foundation 32 Nb C Class G.I. Pipe Used. Closing Caps Are Made Up Of High Quaility Fiber Reinforced Plastic Material Pins Used Of Diameter. 25 Mm Are Made Up Form Sae 8620 Bright Material. Pins Used Of Diameter 13 Mm Are Made Up From En 8 Material With Crca Pipe 20 X 20 Mm Of Thickness 3.00 Mm For Paddle Assembly. The Bearing Used Are 6001 Zz & 6205 Xx Permanent Lubricated Sealed Bearing Of Reputer Brand. High Tensile Steel With Galvanized Nuts And Bolts Are Used For Assembly. The Circlip Used For Assembly Are Of A24 Type. The Powder Coating Done With Pure Polyester Powders Form Ackzonable Of Berger Paints With 60 To 70 Micron Thickness. , Rower Dimensions :- 1200 Mms (Lenght) X 1000 Mm (Width) X 920 Mm (Height) Safe Area :- 1.5 Mtr. X 1.5 Mtr Rower Equipment Made Form C Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Milimeters. The Main Frame Is Of 80 Nb C Class G.I. Pipe Welded With M.S. Round Plate Of 250 Mm X 10 Mm. The Handle Frame 25 Nb Is Made Form C Class G.I. Pipe . The Foundation Used For Fixing Is A Structure And Made Form Center Pipe Of G.I. Of 80 Nb C Class Welded With M.S. Round Plate Of 250 Mm & 10 Mm Thick Main Pipe Supported With 25 Mm X 25 Mm M.S. Angles Of 3 Mm Thickness And 20 Mm X 40 Mm Crc Square Pipes Of 3 Mm Thickness. To Join The Movement Frame To Main Frame Connecting Links Made Up Form 32 Nb G.I. C Class Pipe. The Seat Fitted On Th Outer Frames Are Made Up Of M.S. Sheet Of Size 330 Mm X 300 Mm X 2 Mm Thickness And Deep Drawn And Pressed Intools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. Pins Used Of Diameter 17 Mm Are Made Up Form Sae 8620 Bright Material. The Bearings Usedare Of 6203Zz Pemanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Sttel With Galvanized Nuts And Bolts Are Used Of Assembly. The P.U. Bushes ( Stopper) Used To Avoid The Collistion. The Cirilips Used For Assembly Is Of A 16. The Powder Coating Done With Polyester Powders Form Ackzonoble Of Berger Paints With 60 To 70 Micron Thickness.

INR 1000 /-

Refer document