Bids Are Invited For 100234246-M5653016525-Screw Conveyor Assembly, AHP_COMMON, ON BASIS OF NTPC DRG / SPECS PART NAME: SCREW CONVEYOR ASSEMBLY DRAWING & POSITION NUMBER: 060-1004-011-A1-R3 FRONT JOURNAL MATERIAL: EN-8, REAR JOURNAL MATERIAL SPEC: AISI 347, PIPE: HOT FINISHED SEAMLESS PIPE, IS 1161 YST 310, THICKNESS:16 MM, SCREW PLATE MATERIAL SPEC:IS 2002 GRADE 2, CIRCULAR DISK: BOILER PLATE, CONVEYOR, OEM / PARTS PART NAME: FRONT JOURNAL DRAWING & POSITION NUMBER :060- 1004-062-A3 & 1, CONVEYOR, OEM / PARTS PART NAME: REAR JOURNAL DRAWING & POSITION NUMBER :060-1004-062-A3 & 2, SCREW CONVEYOR, NORMAL/PARTS PART NAME: SCREW PLATE DRAWING & POSITION NUMBER :060-1004-013-A3 & 4 EQUIPMENT NAME: SCREW CONVEYOR MATERIAL STANDARD:IS 2002, GRADE I, AHP_COMMON, ON BASIS OF NTPC DRG / SPECS PART NAME: COUPLING ASSEMBLY APPLICATION: SCREW CONVEYOR DRAWING & POSITION NUMBER: 060-1004-016-A3 COUPLING FLANGE/BOLT MATERIAL: EN-8, SPACER MATERIAL:MS, RUBBER BUSH-SYNTHETIC RUBBER(SH 60-70), AHP_COMMON, ON BASIS OF NTPC DRG / SPECS PART NAME: BEARING HOUSING APPLICATION: SCREW CONVEYOR MATERIAL: EN-8 DRAWING & POSITION NUMBER: 060-1004-031-A2, AHP_COMMON, ON BASIS OF NTPC DRG / SPECS PART NAME: BOTTOM BEARING MATERIAL: UHMW-PE DRAWING & POSITION NUMBER: 060-1004-064-A3 ADDITIONAL INFORMATION: FOR SCREW CONVEYOR 1 SET CONSISTS OF BOTTOM BEARING - 01 NO. TEFLON COLLAR (ODXIDXT) - 219X140.1X16 MM - 02 NOS. 219X140.1X10 MM - 02 NOS. 219X140.1X25 MM - 02 NOS., AHP_COMMON, ON BASIS OF NTPC DRG / SPECS PART NAME: FLANGE MATERIAL: MILD STEEL DRAWING & POSITION NUMBER: 060-1004-055-A3 & 1 FOR SCREW CONVEYOR, AHP_COMMON, ON BASIS OF NTPC DRG / SPECS PART NAME: END COVER MATERIAL: MILD STEEL DRAWING & POSITION NUMBER: 060-1004-055-A3 & 2 FOR SCREW CONVEYOR, AHP_COMMON, ON BASIS OF NTPC DRG / SPECS PART NAME: END COVER MATERIAL: MILD STEEL DRAWING & POSITION NUMBER: 060-1004-055-A3 & 2 FOR SCREW CONVEYOR, AHP_COMMON, ON BASIS OF NTPC DRG / SPECS PART NAME: FLEXIBLE COUPLING MOTOR END APPLICATION: SCREW CONVEYOR DRAWING & POSITION NUMBER: 060-1004-052-A3 MATERIAL SPEC: EN-8, AHP_COMMON, ON BASIS OF NTPC DRG / SPECS PART NAME: BUSH APPLICATION: SCREW CONVEYOR MOTOR COUPLING BOLT MATERIAL: SYNTHETIC RUBBER DRAWING & POSITION NUMBER: 060-1004-003-A4-0 DIMENSION: LENGTH:34 X OD:33.6 X ID:18 MM SHORE HARDNESS:60-70A, AHP_COMMON, ON BASIS OF NTPC DRG / SPECS PART NAME: RUBBER BUSH FOR SCREW COUPLING APPLICATION: SCREW CONVEYOR GEARBOX MATERIAL: SYNTHETIC RUBBER DIMENSION: LENGTH:36 X OD:45.5 X ID:24 MM SHORE HARDNESS:60-70A, AHP_COMMON, ON BASIS OF NTPC DRG / SPECS PART NAME: COUPLING BOLT WITH NUT MOTOR END DRAWING & POSITION NUMBER: 060-1004-002-A4 & 1 FOR SCREW CONVEYOR, MATERIAL SPEC: EN-8, AHP_COMMON, ON BASIS OF NTPC DRG / SPECS PART NAME: COUPLING BOLT WITH NUT SCREW END DRAWING & POSITION NUMBER: 060-1004-002-A4 & 2 FOR SCREW CONVEYOR, MATERIAL SPEC:EN-8 Total Quantity : 855
