|
| 1 | B/R WORK |
| 2 | Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs, complete all as specified. |
| 3 | S&F true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24mm x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24mm x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24mm x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19mm x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200mm c/c in both directions using 3.0mmthick pre-straightened GI wire.including 595mm x 595mm x 6mm thick E-Board Designer ceiling fixing 600mm x 600mm x 6mm grid (Frame work) etc complete all as specified and directed. |
| 4 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering. complete all as specified. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles. complete all as specified. |
| 6 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M complete all as specified. |
| 7 | Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified. |
| 8 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified. |
| 9 | Taking down Shutters of any description exc 1 sqm but n. exc 2 sqm each of any description complete all as specified and directed. |
| 10 | Taking down, easing, adjusting and refixing in the same opening shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and refixing builders hardware as required including renewal of unserviceable screws etc. complete all as specified. |
| 11 | Dismantling wrought iron or mild steel work of any description not othrwise provided for complete all as specified. |
| 12 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of450mm x 300mm x 7mm/ 600mm x 450mm x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified. |
| 13 | M&L for Non - skid Ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 14 | M&L for Mirror polish on marble/ granite/ kota stone/ stone work where ever required to give high gloss finish complete. |
| 15 | M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified. |
| 16 | M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. complete all as specified. |
| 17 | M&L for rendering 10mm thick in cement mortar (1:3) as in ceiling on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 18 | M&L for preparation of newly plastered surface and applying two coat of distemper oil emulsion over a coat of primer and one coat of putty white or tinted on wall surface complete all as specified and as directed. (Note:- painting will be done by brush/ spray/ roller of building upto the height G+1) complete all as specified. |
| 19 | M&L for preparation of newly plastered surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty specified and directed. (Note:- painting will be done by brush/ spray/ roller of building upto the height G+1) complete all as specified. |
| 20 | M&L for preparation of newly plastered surface and applying two coat of distemper over a coat of primer on ceiling etc complete all as specified and as directed. (Note:- painting will be done by brush/ spray/ roller) complete all as specified. |
| 21 | M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered/ decorated wall and ceiling surface and applying two coat of Premium Acrylic smooth interior paint and including priming coat of interior primer and incl one coat of wall putty complete all as specified and as directed. (Note:- painting will be done by brush/ spray/ roller of building upto the height G+1) all as per directed by Engr -in-Charge) (Note:- Rate shall be included for necessary scaffolding and safety measures where required at site) |
| 22 | M&L for Preparation of old painted wooden surfaces of any description over 10cm or girth and applying one coats of synthetic enamel paint over a coat of pink primer complete all as specified |
| 23 | S & F of Powder coated aluminum threetrack sliding shutters consisting two Glazed shutters and one guazed shutters(with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces with brick work and plaster as required at site:-(i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick.(ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm.(iii) Aluminium glazing strip of size 18.2 x 16.66mm.(iv) 4 to 5 mm thick float glass superior quality make Modi float for two shutters.(v) IDPE rubber gasket for fixing glass.(vi) Locking cleat per shutter -01 No.(vii)Two nos sliding rollers per shutter.(viii) Rubber shock absorber 03 No pershutter.(ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter.(x) Fixing screws for frame with wall – 06 No per window. |
| 24 | S & F Powder coated Aluminium ventilator, fixed type without sash bar, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc. including 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion complete all as specified. |
| 25 | S&F powder coated of any colour (Thickness or powder coating not less than 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 26 | S&F stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples with wooden beading on wooden shutter or width screws to aluminium window/ ventilators shutter. complete all as specified |
| 27 | S&F 300mm length, powder coated aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. complete all as specified |
| 28 | S&F 300mm ordinary rat and tail rod pattern springes including roller plate and roller complete of mild steel complete all as specified |
| 29 | S&F in repair stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples with wooden beading on wooden shutter or width screws to steel shutter. |
| 30 | S&F in repair Stainless steel curtain rod/ rail25mm dia medium weightwith premium quality incl SS brackets with decorative caps as approved by Engr-in-Charge complete all as specified. |
| 31 | S & F small fitting such as brackets of any latch and hinges block shaped door and window stops and like incl all necessay labour article not exc 200mm each in 2nd class hard wood all as specified. |
| 32 | S & F Framed work as in doors, gates and window guard bars of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. |
| 33 | S&F in repair laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing includingall fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 34 | S&F in repair laying and testing for 20mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed. |
| 35 | Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortat in 1:4 cutting depth not exc 10 cm complete all as specified |
| 36 | S&F in repair fancy type CP two way stop cock of 15mm bore complete all as specified. |
| 37 | S&F in reparis health faucet CP with connecting pipe 1 meter long with stand. complete all as specified |
| 38 | S&F Chromium plated towel ring fixed withscrews (Minimum weight 90gms) complete all as specified. |
| 39 | S&F in repair 15mm bore bib tap long body heavy cast copper alloy (fency type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed. |
| 40 | S&F 15mm bore brass CP Wall mixer (3-in-1) with arrangement for both telephonic hand shower and overhead shower with bend pipe complete all as spcecified and directed. |
| 41 | S&F in repairs Overhead shower 125mm x 125mm (5\" x 5\") with 200mm (8\") long shower arm and wall flange complete all as specified and as directed. |
| 42 | S&F in repairs soap dish glass, complete all as specified and directed. |
| 43 | S&F in reparis Brass chromium plated tublar towel rail, 20mm dia \"D\" type 60 cm long between flanges, complete all as specified |
| 44 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified |
| 45 | S & F in repair vitreous china water closet Rimless One piece EWC with slim soft close seat cover 660 x 350 x 745mm Concealed S or P Trap for better aesthetics Snow White - Whiter than the whitest complete all as specified. |
| 46 | S&F in repair toilet paper holder chromium plated complete all as specified and as directed. |
| 47 | S&F Grating 100mm dia of CP with or without hole complete all as specified |
| 48 | S&F in repairs table top basin, of size 515mm x 415mm x 145mm fixed complete incl CP waste coupling, waste pipe, PVC connection for hot & cold all as specified. |
| 49 | S&F in repair chromium plated Central hole basin mixer with 450mm braided connection pipe (without pop-up) screwd down for 15mm GI bore pipe complete all as specifed. |
| 50 | S&F looking mirror 6.3mm thick exc 0.50each pane Grinding, polishing and rounding off edges of glass, drilling holes in glass any type fixed on wall with chromium plated screws complete all as specified and directed. |
| 51 | S&F in repair stop valves/ angle cock, 15mm dia pipe cast copper alloy, fancy type chromium plated with ong shank and cup sccewed down high pressure for iron pipe or for union and fixed. |
| 52 | Taking down CI or pvc soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes. Bends, swan-necks etc., including cleaning or refixing or removal to store. up to 14th storey |
| 53 | S &F 110mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls. |
| 54 | S&F 110mm bore PVC (SWR) bends of any radius. complete all as specified |
| 55 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified. |
| 56 | S&F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified. |
| 57 | S &F 75mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls. complete all as specified |
| 58 | S&F 75mm bore PVC (SWR) bends any radius complete all as specified |
| 59 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified |
| 60 | S&F 75mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified |
| 61 | M&L for PVC (SWR) floor trap 75mm dia plain with graing including jointing with solvent cement etc complete all as specified |
| 62 | M&L 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edgemoulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified |
| 63 | S&F, solid PVC wall panelling consisting of 5mm thick plain colour PVC sheet fillet of width 35mm inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 64 | S&F WPC board for cupboard shelf 12mm thick any colour as approved by Engr-in-charge complete all as specified and directed. |
| 65 | S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 66 | S&F Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. complete all as specified. |
| 67 | S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. |
| 68 | Disconnecting 500 Ltr existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. And hoisting if required reconnecting and re-fixing in position. complete all as specified. |
| 69 | M&L for fly ash Brick work straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) using old size bricks complete all as specified |
| 70 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required. complete all as specified. |
| 71 | M&L for Precast cement concrete 1:2:4, type B -1 (Using 20mm graded stone aggregate) in landings, bed plates, pintle blocks, anchorage blocks, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary form work, complete all as specified |
| 72 | S&F TMT bars 10mm dia and over cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips. complete all as specified. |
| 73 | Excavation in hard/ dense soil as in post holes each n.exc 0.50cum, getting out, returning, filling, in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering and removing surplus soil complete all as specified. |
| 74 | M&L for cement concrete in foundations, filling, bed blocks and mass concrete type B-2 (1:2:4) (40mm graded aggregate) complete all as specified. |
| 75 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire. |
| 76 | Supply only galvanized iron chain link fencing approved size complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F mild steel angle iron posts and struts in fencing post and iron flats for securing chain link fencing including all necessary drilling bolting etc. and similar work complete all as specified. |
| 78 | S&F mild steel screw bolts machine made with hehagonal or square heads at one end and screwed the other, or screwed both ends each screwed and to be fitted with washers and one hexagonal or squere nuts n. exc 5 cm long and diqa of neck 10mm, complete all as specified. |
| 79 | S&F mild steel framed work such as framed and hung as gates ornamental and intricate design, including pintle hinges, stops, hand-made sliding bolts, etcgrills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed. |
| 80 | M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified. |
| 81 | M&L for preparation of new or previously untreated surfaces of steel n. exc 10 cm in width or girth and unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified. |
| 82 | M&L for Cement concrete type B-2, 1:4:8 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified. |
| 83 | M&L for 300mm x 300mm x 10mm thick high traffic paver tiles (coloured) joint free as in floors of and jointed with neat cement slurry and poited in white/ coloured cement to match the surface laid over and inculding 20mm thick screed bed in CM 1:6 complete all as specified. |
| 84 | S&F stainless steel benches/ Hand rails of 304 Grade of approved pattern/ design including SS welding, buffing fixed to ground complete all as specified. |
| 85 | M & L for cement concrete type C-2 1:3:6 (Using 20mm graded stone aggt) in foundation filling and mass concrete for post holes complete all as specified. |
| 86 | S&F Steel work in tubular trusses and post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified. |
| 87 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screwcomplete all as specified. |
| 88 | Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., complete all as specified. |
| 89 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding fixed with self tapping screws, making grooves on wall for proper fixing of sheet with wall and covered with concrete or other leakage proof material including taking down the existing unserviceable PVC sheets complete all as specified. |
| 90 | E/M WORK |
| 91 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc, and making good the disturbed surface of walls and floors etccomplete all as specified . |
| 92 | Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etccomplete all as specified. |
| 93 | Taking down carefully MCB DBs/ sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors complete all as specified. |
| 94 | Taking down existing geyser any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/ connectorcomplete all as specified. |
| 95 | Taking down existing ceiling fans any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified. |
| 96 | M&L for Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including metal flush box, modular cover plate saitable size and cover frame of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:- |
| 97 | (a)One light/ fan/ bell point controlled by one way switch. |
| 98 | (b)One 5 Amps socket out let point controlled by one switch on SAME BOARD with other switches. complete all as specified. |
| 99 | (c)One 5 Amps socket out let point on independent board controlled by one switch. complete all as specified . |
| 100 | All as per item No. 96 here in before but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase/ neutral & for earth 2.5 Sqmm green PVC insulated FRLSH cable for 15 Amps socket point on independent board controlled by one switch. |
| 101 | S&F Modular Switch flush type 6 Amps single pole, one way complete all as specified. |
| 102 | S&F Modular Socket outlet, multi purpose, 5 Pin combined 6 Amps flush type complete all as specified. |
| 103 | S&F Modular Bell push flush type, 6 Amps complete all as specified. |
| 104 | S&F Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socketcomplete all as specified. |
| 105 | S&F Modular Switch 16 Amps single pole, one way complete all as specified. |
| 106 | S&F modular fan regulator step type, 2 module type complete. |
| 107 | S&F Bell, ding dong type, AC 230 Volts, single pole complete. |
| 108 | S&F ceiling rose surface bakelite three terminal complete all as directed. |
| 109 | S&F lamp holder insulated body with back plate for batten fittings complete all as directed. |
| 110 | S&F LED bulb of 7 watt, Of base B-22, suitable for fixing in lamp holder. complete all as specified. |
| 111 | S & F wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient high transmissitivity diffuser, high lumen ouput 230 volts and intregrated electronic driver connector block etc. complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 112 | S & F LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. |
| 113 | S&F Surface/ Recessed mounted LED panel 15 W, slim, compact round LED panel of 15 W plastic body with premium diffuser to ensure glare free & even distribution of light complete all as specified. |
| 114 | S & F Decorative wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22baseand including fixing of LED bulb 10 watts complete all as specified and directed. |
| 115 | S & F LED luminaire 600mm x 600mm square LED panel 35/36 watts, 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-charge. |
| 116 | M&L for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed FRLSH cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed FRLSH 6.0 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wallcomplete all as specified. |
| 117 | Supply and fix in repairs double door SPN DBs eight ways of powder coated DB\"s suitable for MCB\"s fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified. |
| 118 | Supply and fix MCB SPN 6 to 32 Amps 10 KA, \"C\" series including connection with suitable size aluminium/ copper lugs complete all as specified |
| 119 | Supply and fix MCB SP 6 to 32 Amps 10 KA, \"B\" series including connection with suitable size aluminium/ copper lugs complete all as specified |
| 120 | M&L for single pole and neutral encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with one single pole MCB SP 20 Amps complete all as specified and directed. |
| 121 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for Bldg security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 122 | Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour includingcutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. |
| 123 | S&F modular TV socket as following: (a)TV socket 1 module Make 1 Nos (b)Modular with plate for TV socket 1 No (c)Plastic flush boxes for 1 module jack |
| 124 | Taking down carefully servicebleKWH Electric Meter single phase any type and re fixing the same after completion of the work with wooden rectangular board making good the disturbed surface of walls and floors etc complete all as specified. |
| 125 | S & F Rigid non-metallic PVC conduit of suitable size required exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks etc. complete all as specified. |
