|
| 1 | Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for allas specified and directed. |
| 2 | M&L Cement concrete type D2, 1:4:8( 40 mm graded crushed stone aggregate) as filling and mass concrete of existing rollers area complete all as specified and directed. |
| 3 | M&Lfor laying 50mm thick Cement concrete type B-1, 1:2:4( 20 mm graded crushed stone aggregate) as in floor and paving surfaces all as specified and directed. |
| 4 | M&L Cement concrete type D2, 1:4:8 ( 40 mm graded crushed stone aggregate) 75 mm thick as in sub base of flooring all as specified and directed. |
| 5 | M&L for sand cushion (Tibba Sand), filling under floors/tiles/paver blocks or in foundations including watering and consolidation complete all as specified and directed. |
| 6 | M & L for laying 100 mm thick rubber moulded precast concrete interlocking paver block and shape and size conforming to IS -15658-2006 of M-50Grade with grey cement andpigment complete all as specified and directed.Note:-The sample shall be got approved before bulk procurement andshall be got tested independently by the Engg-in-Charge. |
| 7 | M&L PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in sides of rounded or chamfered on edges of interlocking/chequered tiles complete all as specified and directed. |
| 8 | Demolition of brick workor stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc. and rubbish materials remove from site all as specified and directed |
| 9 | M&L Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 10 | Taking down cement plaster of any description on brick/stone wall incl raking out joints hacking for keyscrubbing down water, complete all as specified and as directed. |
| 11 | M&L for 15 mm thick cement plaster in (1:6) on fair faces of brick work finishing even and smooth w/o using extra cement, complete all as specified and as directed. |
| 12 | M&L for Rendering 15mm thick cement mortar 1:4 on brick or concrete wall surface finished even and smooth without using extra cement, complete all as specified and as directed. |
| 13 | M&L preparing newly plastered wall surfaces and applying two coat of weather proof exterior emulsion over and including one coat of primer complete all as specified and directed. |
| 14 | M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over and including a coat of primer, complete all as specified and as directed. |
| 15 | M&L for preparation of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed. |
| 16 | M&L preparation of old painted surface ofwall surface and applying one coats ofweather proof exterior emulsion in camouflage pattern complete all as specified and directed. |
| 17 | Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified . |
| 18 | Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed at a level n.exc 1.5m above starting point complete all as specified and directed. |
| 19 | Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed by Engr-in-charge. |
| 20 | Allas per item No-19 above but 1.5m to 3m height from base completeall as specified and directed. |
| 21 | Allas per description of item No-19 above but 3m to 4.5m height from base completeall as specified and directed. |
| 22 | Allas per description of item No-19 above but 4.5m and above height from base completeall as specified and directed . |
| 23 | Dismantling posts or struts in natural ground (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed groundcomplete all as specified and directed. |
| 24 | Excavation in post holes(or similar holes) each in not exc. 0.50 cum getting out returning, filling in an ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil out of defence land and making good surface all as specified & directed. |
| 25 | M&L PCC 1:3:6 type C2 (40mm graded crushed stone aggregate) filling in post holes, foundation,and other similar work complete all as specified and as directed. |
| 26 | M&L for Mild steel angle iron fencing posts and struts in fencing including necessary cutting , drilling , welding etc and bending to swan neck shape as required and drilling holes notching for wire etc conforming to Fe-410-0 or 310-0 complete all as specified and directed. |
| 27 | Dismantling barbed wire , from strut pole any position, complete all as specified and directed. |
| 28 | S&F Galvanised 2 strand , steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixingto any type of standard railsstraining bolts, including securing ortyping at crossingswith andprovision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured), complete all as specified and directed. |
| 29 | M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed. |
| 30 | S&F 3.00 mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting, sealed down with an approved adhesive, complete all as specified and directed. |
| 31 | Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed section , complete all as specified and directed. |
| 32 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 33 | M&L for MS work in Roof trusses (framed), trussed, purlins, crane gantries, rails, posts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.including special shaped washer etc. complete and including all necessary drilling or cutting holes in brick/ concrete surfaces and making good, welding work, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete and all as specified |
| 34 | S&F MS plain plates, square cut, with riveted, bolted or welded attachment FE-410-W (Gde-E-250) quality A as specified,complete all as specified and directed. |
| 35 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long, diameter of neck in 5 to 10mm , complete all as specified and directed. |
| 36 | Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified & directed. |
| 37 | S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 38 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed. |
| 39 | S & F 1mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed. |
| 40 | Supply and laid in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 41 | S& F in repairs PVC (SWR) bends for 110mm bore pipe, complete all as specified and directed. |
| 42 | Taking up or down 15 mm dia steel tubing & connections including clearing for refixing or removal to store, complete all as specified and directed. |
| 43 | S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. |
| 44 | Dismantling water tanks any type of capacityExc 500 but n.exc 1000 liters ,complete all as specified and directed. |
| 45 | Dismantling water tanks any type of capacityexc 250 but not exc 500ltr ,complete all as specified and directed. |
| 46 | S&F 1000 liter capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered white, hoisted and fixed in position, including 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 47 | All as per Item no 46 above but of 500 liter capacity. |
| 48 | S&F in repair 15mm Bib taps, cast copper alloy , chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 49 | Taking down shutters of any description exc 2sqm, complete all as specified and directed. |
| 50 | Taking down old wooden doors (single/double shutter ) of exc 4sqm n.exc 6sqm any position with complete accessories including chowkhat or frame all as specified and directed.. |
| 51 | S & F Framed work as in doors or gates of angle or other sectionFE-410 W (Gde E-250) Quality \"A\" with gusset plates, MS Plain black sheet for door, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 52 | S & F Mild Steel flat iron as in hold fast 400mm long embedded in PCC block with spitted ends and in braces in diagonal hand made sliding bolts, clamp hooks and similar worklike Banks, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; largehasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 , complete all as specified and directed. |
| 53 | M & L PCC 1:2:4type B1 (20mm graded stone aggregate )asin lintels upto 1..5 m clear span, cills, hold fast for door, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and threading, complete all as specified and directed. |
| 54 | S&F factory made 30mm thick flush shutters, solid core construction, with particle board coreand plywood face panels, commercial type on both sides includeforthe provision of suitable blocks for taking mortice locks, latches, or other fittings complete all as specified and directed. |
| 55 | Material and labour for surfaces of any description not other describe over 10cm width or girth and applying twocoat of synthetic enamel paintover one coat of pink primer,including preparation of new wooden surface, complete all as specified and directed. |
| 56 | Supply and fixing in repair Aluminium butt hinges medium weight, cold rolled, 100mm, ISI marked, fixed with stainless steel screws complete all as specified and directed. |
| 57 | Supply and fixing 200mm long aluminium anodised barrel tower bolt, extruded section, fixed with stainless steel screws complete all as specified and directed. |
| 58 | Supply and fixing 150 mm size extruded aluminiumalloy handles fabricated type, anodised fixed with stainless steel screws complete all as specified and directed. |
| 59 | Supply and fixing 300mm aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed with stainless steel screws complete all as specified and directed. |
| 60 | S&F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes including Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads complete all as specified and directed. |
