Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Warehouse |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means SSR OF 2022-23 ITEM NO. 21.01 & PAGE NO.153 |
| 3 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m to 3.0 m) By Mechanical Means SSR OF2022-23 ITEM NO. 21.08 & PAGE NO.154 |
| 4 | Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means SSR OF 2022-23 ITEM NO. 21.12 & PAGE NO.154 |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR OF 2022-23 ITEM NO. 24.01 & PAGE NO.175 |
| 6 | Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR OF 202-23 ITEM NO. 25.11 & PAGE NO.178 |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR OF 2022-23 ITEM NO. 25.31 & PAGE NO.179 |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR OF 2022-23ITEM NO. 25.5 & PAGE NO.181 |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR OF 2022-23 ITEM NO. 26.05 & PAGE NO.184 |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete inM-20 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR OF 2022-23 ITEM NO. 26.25 & PAGE NO.185 |
| 11 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR OF 2022-23 ITEM NO. 26.33 & PAGE NO.188 |
| 12 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.SSR OF 2022-23 ITEM NO. 27.01 & PAGE NO.197 |
| 13 | Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.SSR OF 2022-23 ITEM NO. 21.36 & PAGE NO.157 |
| 14 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete.SSR OF 2022-23 ITEM NO. 21.37 & PAGE NO.157 |
| 15 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.SSR OF 2022-23 ITEM NO. 21.4 & PAGE NO.157 |
| 16 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR OF 2022-23 ITEM NO. 27.05 & PAGE NO.197 |
| 17 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete SSR OF 2022-23 ITEM NO. 32.06 & PAGE NO.209 |
| 18 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR OF 2022-23 ITEM NO. 32.11 & PAGE NO.209 |
| 19 | Providing and fixing in position factory made box type steel window with glazed fanlight including steel windows of cold rolled section of 105mm x 60mm x 1.25mm thick frame section filled with cement concrete (1:2:4) and metal pressed steel shutters of 20 gauge (1mm) as per detailed drawing and design or as directed including providing horizontal mild steel 12mm square bars at 10cm center to center, required F-7B section, section 7-6, section 20mm x 5mm mild steel flat for shutter and F4B section for frame, 3mm thick glass of approved quality for fanlight necessary fixtures and fastening etc. complete finishing with one coat of anti-corrosive paint etc.complete SSR OF 2022-23 ITEM NO. 39.22 & PAGE NO.248 |
| 20 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (Without mechanical gear) SSR OF 2022-23 ITEM NO. 39.24 & PAGE NO.248 |
| 21 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down etc. complete.SSR OF 2022-23 ITEM NO. 36.03 & PAGE NO.227 |
| 22 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old andnewsurfacesintwocoatsincludingscaffolding,preparingthesurface.(excludingthe primer coat)etc. complete. SSR OF 2022-23 ITEM NO. 36.12 & PAGE NO.227 |
| 23 | Providing and applying plastic emulsion paint of approved quality, colour and shade tonew surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.SSR OF 2022-23 ITEM NO. 36.14 & PAGE NO.227 |
| 24 | Providing preconstruction alantitermite treatment as perI.S.6313 (PartII) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.BASIC RATE AS PER SSR OF 2022-23 ITEM NO. 21.22 & PAGE NO.155 |
| 25 | Providing and fixing lioghtening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25mm dia. 1.2 mm thick with multiple points head 1.2 mt. long ( Heavy Duty) welded or clamped to G.I. pipe pole B grade 50 mm diaof requiired length with M.S. round bnase plate 25 Cm diam and 10mm thick at bottomembeded in cement concrete 1:3:6 dfoundation of size 45 cm diam x 45 cm Height and providing earthing with copper earth plate of size 60 x 60 x 0.3 cms with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40Kilogramcharcoal and salt with altemate layers of charcoal and salt and G.I.pipe 40mm dia 2 meter length burried in earthe upto earthling plate remining portion above ground level for watering and refilling comcpete Note- Copper strip fropm lightening conductor is not considered in this item. SSR OF 2022-23 ITEM NO. 44.18 & PAGE NO.295 |
| 26 | Providing and laying in situ cement concrete M30 with tremix treatment for 200 mm thickness for flooring with groove cutting of 4 mm wide and 20mm deep with necessary refilling with bitumenetc. complete. SSR OF 2022-23 ITEM NO. 33.31 & PAGE NO.216 |
| 27 | Royalty |
| 28 | FOR SAND |
| 29 | FOR OTHER METAL |
| 30 | Testing |
| 31 | BASIC TEST OF AGGREGATE Water Absorption, Specific Gravity, Impact Value, Crushing Value |
| 32 | CEMENTStandard Consistency Fineness,Specific Gravity, Setting Time ( Initial & Final), Compressive Strength, Soundness |
| 33 | BRICKS Water Absorption , Compressive Strength, Efflorescence (Set of 5 bricks) |
| 34 | CONCRETE Compressive strength of C.C.Cube (Set of 3 cubes) |
| 35 | MURUM-HARD Sieve Analysis |
| 36 | STEEL BAR TESTING Upto 16 mm (Set of 3 Bars) |
| 37 | PEB |
| 38 | Structural Steel E-350Supplying, fabricating, erecting and fixing in position of steel structures at all elevations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062 - 2006. Rate shall include cost of cutting, welding, splice plates and packing plates, transporting,straightening, cleaning, fabricating and erecting in position welded/bolted Structural steelwork in columns, beams, trusses, purlins,platforms, ladders, monorails, staircases ,supports, strengthening of steel membersetc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings includingpainting as per G4/G5/G6 before erection and all materials and labour charges etc., complete andincluding Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG – HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost of bolts,nuts, washers, welding and electrodes required for the complete work). |
| 39 | Structural Steel - Cold Formed Light gauged Supplying, fabricating and erecting of Cold Formed Light Gauge structural steel members conforming to IS:801/ IS:811 hot-dip galvanised to IS:4759 - 96 including cutting, welding or bolting, splice plates and packing plates,transporting,straightening, cleaning, fabricating and erecting in position. |
| 40 | Sheeting PPGL 0.5 mm thk Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer incharge with all necessary accessories.(Essar) Make) |
| 41 | Roof Accessories - Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge- |
| 42 | Center Ridge |
| 43 | Gable flashing |
| 44 | Roof Gutter (Assumed Girth- 600 mm) PPGI 0.5 mm Thk. Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends,all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc., conforming to latest specification including straightening, cutting, welding, bending to shape, bolting etc., complete and as directed as per engineer incharge |
| 45 | Downtake Pipe Providing and fixing of the rain water down take pipes of PPGI, the sectional area of rain water down take pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimetre of roof area drained. No spout shall be less than 80 mm in diameter. The spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour charges etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / |
| 46 | Polycarbonate Sheet Supply & Fixing of 2mm thkpolycarbonate sheets as per drawing & as directed by engineer in-charge. |
| 47 | Turbo Ventilator Supply & Fixing of turbo ventilator with 610 mm throat, having base ring & top plate in stainless steel of 0.8 mm thick, rotated using twin bearings of SKF - 600122 & 600322 permanently lubricated & sealed. Fixed in FRP base plate of2mm thk clear 1.020mtr wide & 1.7 mtr long. |
| 48 | Electricity |
| 49 | Supplying,erecting&terminatingXLPEarmouredcable3 core6sq.mm.copperconductorcontinuous5.48sq.mm. (12SWG)G.I.earthwirecompleteerectedwithglands& lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 50 | Makingtrenchofsuitablewidthanddepthinhardmurum/ tar roadfor layingprovided LTcable upto andincluding 16 sq. mm complete as per specification no. CW-EXNCTR |
| 51 | Makingtrenchofsuitablewidthanddepthinsoftsoilfor layingprovidedLTcableuptoandincluding16sq.mm complete as per specification no. CW-EXN-CTR |
| 52 | Supplying & erecting mains PVC unarmoured cable 1100Volt gradeISImark3core/2.5sqmmstranded/solidcoppercompleteerectedonwallwithdulypaintedG.I.Saddle@ |
| 53 | Supplying & erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrialtwopinplugsocket10Aand3pinplugtop10A with top cover necessary connection etc complete withapproved make. |
| 54 | ProvidingpointwiringforstreetlightwithPVCunarmoured cable1100VoltgradeISImark3core1.5sqmmstranded/ solid copper erected on wall with G. I. Saddle duly painted @ 0,25 m C/C rigidly grouted in the wall with the help of platedscrew including 4” x 4” M. S. box 2 way with epoxy painting & |
| 55 | Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base. |
| 56 | Supplying and erecting LED street light fitting suitable for20 to25W,withPF>0.95classIP65andabovehousingof pressurediecastaluminiumalloyandheatsinkextruded aluminium complete as per specification No FG-ODF/FLS |
| 57 | SupplyinganderectingstreetlightWallbracketmadefrom 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB |
| 58 | Providing earthingwith galvanizediron earthplate size60 x 60x 0.6cmcompletewithallmaterials,testing&recording the results as per specification no. EA-EP |
| 59 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 60 | Supplying, erecting & marking DPMCB 6A to 32A,C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB |
| 61 | Supplying,erecting&markingSPMCB6Ato 32A,B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 62 | SupplyinganderectingGIsheet1.6mm(16SWG)tobe usedforfabricationofboxespanelboardsetc.including cutting,bending,drilling,welding,rivetingetc.andpainting with one coat of red lead paint and 2 coats of enamel paint. |
| 63 | Supplying and erecting marine plywood 18/19 mm thick fixed towall or onprovided panel board withnecessary materials such as screws, wall fasteners, supports, nut bolts etc. complete. |
| 64 | Supplyinganderectingtriplepoleandneutraldistribution board(TPNDB)surface/flushmountedsuitableforSPMCB of 12 ways on iron / GI frame (horizontal busbar type) as perspecification no. SW-SWR/MCBDB |
| 65 | Supplying&erectingG.I.pipe‘A’ class25mmdia.erected forenclosing XLPE armoured cable onwall/pole asper specification no. CB-CE |
| 66 | Supplying & erecting G.I. pipe ‘A’ class 40 mmdia. erected forenclosing XLPE armoured cable onwall/pole asper specification no. CB-CE |
| 67 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosingcable belowground/road surface, to required depth complete. |
| 68 | Supplying&erecting18guageM.S.Boxpowdercoated (4\"x4\") 3 way for mains connection. |
| 69 | Supplying & erecting Siemens type brass cable glands for 3 to4core6sq.mm./2to4core10sq.mm.forXLPE armoured cable as per specification No. CB-GL |
| 70 | Supplying shockproof type hand lamp with lamp holder, bulb/ lamp100Wguardedglass and30 mtr.3 corePVC flexible cord with hand shield type 3 pin 6 Amp. Plug top. |
| 71 | Point wiring for independent plug in 20 mm ISI markedHMS PVCconduitwith1.5sq.mm(2+1E)FRLSHgrade copper wire, flush type switch, earthing and requiredaccessories as per specification No: WG-PW/SW |
| 72 | SupplyinganderectingStreetlightbracketmadefrom25 mm. dia =B‘ class G.I. Pipe, 0.6 min length along with pole capof300mmlengthand80mmdiadulyweldedwith provided leads as per specification no. FG-BKT/BPC |
| 73 | Supplying&erectingmainswith2x2.5Sq.mmstranded copper PVC insulated wire with 2 x 1.5Sq.mmcopper PVC wire in PVC casing - caping20 mm on wall / ceiling. |
| 74 | Supplying&erectingmainwith2x4.00Sq.mmstranded copper PVC insulated wire with 2 x 1.5Sq.mmcopper PVC wire in PVC casing - capingon wall / ceiling. |
| 75 | Supplying and erecting double pole switch surface type/ flush type240V,32Awithindicator lamp&fuseas per specification no. SW-SWR/BDP. |
| 76 | Supplying and erecting double pole metal clad switch withHC type fuse and neutral link 240V, 32A on iron / GI frame as per specification no. SW-SWR/MDP .. |
| 77 | Supplying&erecting3W,230VintegraltypeLEDLamp suitable for B-22/E-27 base. |
| 78 | Supplying and erecting T8 Fluorescent tube day light 1200mm 36 W |
| 79 | Supplying&erectingreadytouseRetrofitT8LED18/20 tubelightwithpolycarbonatebody,heatsink,integratedHF electronicdrivercomplete&compatibletoT8/T12LED luminaire by disconnecting starter & ballast if necessary. |
| 80 | Supplying and erecting regular/ standard model ceiling fan of 900/1050mm.sweepcompleteerectedinpositionasper specification no. FG-FN/CF |
| 81 | Supplying and fixing wiremesh (Jali) cover suitable for fitting / fanorforanypurpose,completewithnecessarymaterials. The jali cover shall be made from good quality G.I. wire mesh |
| 82 | Supplyinganderectingdingdong/electronicmusicaltype call bell with heavy duty coil suitable to operate on 230V A.C. supplyerectedonpolisheddoublewoodenblock/sunmicablock of suitable size |
| 83 | SupplyinganderectingstreetlightWallbracketmadefrom 25 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB |
| 84 | Supplying & erecting CRCA sheet metal one wayenclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete. |
| 85 | Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board complete. |
| 86 | Internal Road |
| 87 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (with prior permission of S.E.)SSR 2022-23 It. No.2.18Sr. no.87 |
| 88 | Conveying excavated material up to 0.50 km As per S.S.R.rate of transportation Rate As per Transportation of materail SSR 2022-23 |
| 89 | Supplying hard murum/kankar at the road site, including conveying and stacking complete.Spec. No. : As directed by Engineer-in-charge. SSR 2022-23 It. No.2.29a |
| 90 | Spreading hard murum/soft murrum/gravel or kankar for side width complete CD.-3 Page.No. 160 SSR 2022-23 It. No.2.30 |
| 91 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.SSR 2022-23 It. No.2.31 |
| 92 | Providing and constructing 75mm. thick Modified Penetration Macadam(MPM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates) SSR 2022-23 |
| 93 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING Batchmix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) MORTH 511 SSR 2022-23 |
| 94 | 9MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7mm size and penetration bitumen of specified grade @ 1.2kg/Sq.m, preparing existing road surface by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete.(VG-30 bulk bitumen rates are considered to arrive at rates)SSR 2022-23 |
| 95 | Internal Road Royalty |
| 96 | Other Metal & Murum |
| 97 | Testing |
| 98 | Concrete C.C.Cube (Set of 3 cubes) |
| 99 | MuRUM-HARD Sieve Analysis |
| 100 | Shed |
| 101 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means SSR OF 2022-23 ITEM NO. 21.01 & PAGE NO.153 |
| 102 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m to 3.0 m) By Mechanical Means SSR OF2022-23 ITEM NO. 21.08 & PAGE NO.154 |
| 103 | Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means SSR OF 2022-23 ITEM NO. 21.12 & PAGE NO.154 |
| 104 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR OF 2022-23 ITEM NO. 24.01 & PAGE NO.175 |
| 105 | Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR OF 202-23 ITEM NO. 25.11 & PAGE NO.178 |
| 106 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR OF 2022-23 ITEM NO. 25.31 & PAGE NO.179 |
| 107 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR OF 2022-23ITEM NO. 25.5 & PAGE NO.181 |
| 108 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR OF 2022-23 ITEM NO. 26.05 & PAGE NO.184 |
| 109 | Providing and laying Cast in situ/Ready Mix cement concrete inM-20 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR OF 2022-23 ITEM NO. 26.25 & PAGE NO.185 |
| 110 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.SSR OF 2022-23 ITEM NO. 26.33 & PAGE NO.188 |
| 111 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.SSR OF 2022-23 ITEM NO. 27.01 & PAGE NO.197 |
| 112 | Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.SSR OF 2022-23 ITEM NO. 21.36 & PAGE NO.157 |
| 113 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete.SSR OF 2022-23 ITEM NO. 21.37 & PAGE NO.157 |
| 114 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.SSR OF 2022-23 ITEM NO. 21.4 & PAGE NO.157 |
| 115 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteSSR OF 2022-23 ITEM NO. 27.05 & PAGE NO.197 |
| 116 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete SSR OF 2022-23 ITEM NO. 32.06 & PAGE NO.209 |
| 117 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR OF 2022-23 ITEM NO. 32.11 & PAGE NO.209 |
| 118 | Providing and fixing in position factory made box type steel window with glazed fanlight including steel windows of cold rolled section of 105mm x 60mm x 1.25mm thick frame section filled with cement concrete (1:2:4) and metal pressed steel shutters of 20 gauge (1mm) as per detailed drawing and design or as directed including providing horizontal mild steel 12mm square bars at 10cm center to center, required F-7B section, section 7-6, section 20mm x 5mm mild steel flat for shutter and F4B section for frame, 3mm thick glass of approved quality for fanlight necessary fixtures and fastening etc. complete finishing with one coat of anti-corrosive paint etc.complete SSR OF 2022-23 ITEM NO. 39.22 & PAGE NO.248 |
| 119 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (Without mechanical gear) SSR OF 2022-23 ITEM NO. 39.24 & PAGE NO.248 |
| 120 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down etc. complete. SSR OF 2022-23 ITEM NO. 36.03 & PAGE NO.227 |
| 121 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old andnewsurfacesintwocoatsincludingscaffolding,preparingthesurface.(excludingthe primer coat)etc. complete. SSR OF 2022-23 ITEM NO. 36.12 & PA |
| 122 | Providing and applying plastic emulsion paint of approved quality, colour and shade tonew surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.SSR OF 2022-23 ITEM NO. 36.14 & PAGE NO.227 |
| 123 | Providing preconstruction alantitermite treatment as perI.S.6313 (PartII) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.BASIC RATE AS PER SSR OF 2022-23 ITEM NO. 21.22 & PAGE NO.155 |
| 124 | Providing and laying in situ cement concrete M30 with tremix treatment for 200 mm thickness for flooring with groove cutting of 4 mm wide and 20mm deep with necessary refilling with bitumenetc. complete.SSR OF 2022-23 ITEM NO. 33.31 & PAGE NO.216 |
| 125 | Shed Royalty |
| 126 | FOR SAND |
| 127 | FOR OTHER METAL |
| 128 | Shed Testing |
| 129 | BASIC TEST OF AGGREGATE Water Absorption, Specific Gravity, Impact Value, Crushing Value |
| 130 | BASIC TEST OF CEMENTStandard Consistency Fineness,Specific Gravity, Setting Time ( Initial & Final), Compressive Strength, Soundness |
| 131 | BRICKS Water Absorption , Compressive Strength, Efflorescence (Set of 5 bricks) |
| 132 | CONCRETE Compressive strength of C.C.Cube (Set of 3 cubes) |
| 133 | MURUM-HARD Sieve Analysis |
| 134 | STEEL BAR TESTING Upto 16 mm (Set of 3 Bars) |
| 135 | Shed PEB |
| 136 | Structural Steel E-350 Supplying, fabricating, erecting and fixing in position of steel structures at all elevations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062 - 2006. Rate shall include cost of cutting, welding, splice plates and packing plates, transporting,straightening, cleaning, fabricating and erecting in position welded/bolted Structural steelwork in columns, beams, trusses, purlins,platforms, ladders, monorails, staircases ,supports, strengthening of steel membersetc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings includingpainting as per G4/G5/G6 before erection and all materials and labour charges etc., complete andincluding Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG – HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost of bolts,nuts, washers, welding and electrodes required for the complete work). |
| 137 | Structural Steel - Cold Formed Light gauged Supplying, fabricating and erecting of Cold Formed Light Gauge structural steel members conforming to IS:801/ IS:811 hot-dip galvanised to IS:4759 - 96 including cutting, welding or bolting, splice plates and packing plates,transporting,straightening, cleaning, fabricating and erecting in position. |
| 138 | Sheeting PPGL 0.5 mm thk Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer incharge with all necessary accessories.(Essar) Make) |
| 139 | Roof Accessories Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge- |
| 140 | Center Ridge |
| 141 | Gable flashing |
| 142 | Roof Gutter (Assumed Girth- 600 mm) PPGI 0.5 mm Thk. Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends,all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc., conforming to latest specification including straightening, cutting, welding, bending to shape, bolting etc., complete and as directed as per engineer incharge |
| 143 | Downtake Pipe Providing and fixing of the rain water down take pipes of PPGI, the sectional area of rain water down take pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimetre of roof area drained. No spout shall be less than 80 mm in diameter. The spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour charges etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / |
| 144 | Shed Electricity |
| 145 | Supplying,erecting&terminatingXLPEarmouredcable3 core6sq.mm.copperconductorcontinuous5.48sq.mm. (12SWG)G.I.earthwirecompleteerectedwithglands& lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 146 | Makingtrenchofsuitablewidthanddepthinhardmurum/ tar roadfor layingprovided LTcable upto andincluding 16 sq. mm complete as per specification no. CW-EXNCTR |
| 147 | Makingtrenchofsuitablewidthanddepthinsoftsoilfor layingprovidedLTcableuptoandincluding16sq.mm complete as per specification no. CW-EXN-CTR |
| 148 | Supplying & erecting mains PVC unarmoured cable 1100Volt gradeISImark3core/2.5sqmmstranded/solidcoppercompleteerectedonwallwithdulypaintedG.I.Saddle@ |
| 149 | Supplying & erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrialtwopinplugsocket10Aand3pinplugtop10A with top cover necessary connection etc complete withapproved make. |
| 150 | ProvidingpointwiringforstreetlightwithPVCunarmoured cable1100VoltgradeISImark3core1.5sqmmstranded/ solid copper erected on wall with G. I. Saddle duly painted @ 0,25 m C/C rigidly grouted in the wall with the help of platedscrew including 4” x 4” M. S. box 2 way with epoxy painting & |
| 151 | Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base. |
| 152 | Supplying and erecting LED street light fitting suitable for20 to25W,withPF>0.95classIP65andabovehousingof pressurediecastaluminiumalloyandheatsinkextruded aluminium complete as per specification No FG-ODF/FLS |
| 153 | SupplyinganderectingstreetlightWallbracketmadefrom 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB |
| 154 | Providing earthingwith galvanizediron earthplate size60 x 60x 0.6cmcompletewithallmaterials,testing&recording the results as per specification no. EA-EP |
| 155 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 156 | Supplying, erecting & marking DPMCB 6A to 32A,C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB |
| 157 | Supplying,erecting&markingSPMCB6Ato 32A,B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 158 | SupplyinganderectingGIsheet1.6mm(16SWG)tobe usedforfabricationofboxespanelboardsetc.including cutting,bending,drilling,welding,rivetingetc.andpainting with one coat of red lead paint and 2 coats of enamel paint. |
| 159 | Supplying and erecting marine plywood 18/19 mm thick fixed towall or onprovided panel board withnecessary materials such as screws, wall fasteners, supports, nut bolts etc. complete. |
| 160 | Supplyinganderectingtriplepoleandneutraldistribution board(TPNDB)surface/flushmountedsuitableforSPMCB of 12 ways on iron / GI frame (horizontal busbar type) as perspecification no. SW-SWR/MCBDB |
| 161 | Supplying&erectingG.I.pipe‘A’ class25mmdia.erected forenclosing XLPE armoured cable onwall/pole asper specification no. CB-CE |
| 162 | Supplying & erecting G.I. pipe ‘A’ class 40 mmdia. erected forenclosing XLPE armoured cable onwall/pole asper specification no. CB-CE |
| 163 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosingcable belowground/road surface, to required depth complete. |
| 164 | Supplying&erecting18guageM.S.Boxpowdercoated (4\"x4\") 3 way for mains connection. |
| 165 | Supplying & erecting Siemens type brass cable glands for 3 to4core6sq.mm./2to4core10sq.mm.forXLPE armoured cable as per specification No. CB-GL |
| 166 | Supplying shockproof type hand lamp with lamp holder, bulb/ lamp100Wguardedglass and30 mtr.3 corePVC flexible cord with hand shield type 3 pin 6 Amp. Plug top. |
| 167 | Point wiring for independent plug in 20 mm ISI markedHMS PVCconduitwith1.5sq.mm(2+1E)FRLSHgrade copper wire, flush type switch, earthing and requiredaccessories as per specification No: WG-PW/SW |
| 168 | SupplyinganderectingStreetlightbracketmadefrom25 mm. dia =B‘ class G.I. Pipe, 0.6 min length along with pole capof300mmlengthand80mmdiadulyweldedwith provided leads as per specification no. FG-BKT/BPC |
| 169 | Supplying&erectingmainswith2x2.5Sq.mmstranded copper PVC insulated wire with 2 x 1.5Sq.mmcopper PVC wire in PVC casing - caping20 mm on wall / ceiling. |
| 170 | Supplying&erectingmainwith2x4.00Sq.mmstranded copper PVC insulated wire with 2 x 1.5Sq.mmcopper PVC wire in PVC casing - capingon wall / ceiling. |
| 171 | Supplying and erecting double pole switch surface type/ flush type240V,32Awithindicator lamp&fuseas per specification no. SW-SWR/BDP. |
| 172 | Supplying and erecting double pole metal clad switch withHC type fuse and neutral link 240V, 32A on iron / GI frame as per specification no. SW-SWR/MDP .. |
| 173 | Supplying&erecting3W,230VintegraltypeLEDLamp suitable for B-22/E-27 base. |
| 174 | Supplying and erecting T8 Fluorescent tube day light 1200mm 36 W |
| 175 | Supplying&erectingreadytouseRetrofitT8LED18/20 tubelightwithpolycarbonatebody,heatsink,integratedHF electronicdrivercomplete&compatibletoT8/T12LED luminaire by disconnecting starter & ballast if necessary. |
| 176 | Supplying and erecting regular/ standard model ceiling fan of 900/1050mm.sweepcompleteerectedinpositionasper specification no. FG-FN/CF |
| 177 | Supplying and fixing wiremesh (Jali) cover suitable for fitting / fanorforanypurpose,completewithnecessarymaterials. The jali cover shall be made from good quality G.I. wire mesh |
| 178 | Supplyinganderectingdingdong/electronicmusicaltype call bell with heavy duty coil suitable to operate on 230V A.C. supplyerectedonpolisheddoublewoodenblock/sunmicablock of suitable size |
| 179 | SupplyinganderectingstreetlightWallbracketmadefrom 25 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB |
| 180 | Supplying & erecting CRCA sheet metal one wayenclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete. |
| 181 | Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board complete. |
| 182 | ManagementStrategiesandImplementationPlan(MSIP)tomanagetheEnvironmental,Social,Health and Safety (ESHS) risks and ESHS Code of Conduct |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
