}

Tender For Roof Treatment And Other Miscellaneous Civil Works Of Control Room Building And S.D.O. Office At 33/11 K.V. S/S Hakikat Nagar Distt. Saharanpur, 1 Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand)., saharanpur-Uttar Pradesh

Paschimanchal Vidyut Vitran Nigam Limited has published Tender For Roof Treatment And Other Miscellaneous Civil Works Of Control Room Building And S.D.O. Office At 33/11 K.V. S/S Hakikat Nagar Distt. Saharanpur, 1 Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand).. Submission Date for this Tender is 31-07-2024. Shed Construction Tenders in saharanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

43759998
Corrigendum : Tender For Roof Treatment And Other Miscellaneous Civil Works Of Control Room Building And S.D.O. Office At 33/11 K.V. S/S Hakikat Nagar Distt. Saharanpur, 1 Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand).
Open Tender
Indian
Uttar Pradesh
Saharanpur
31-07-2024

Tender Details

Tender For Roof Treatment And Other Miscellaneous Civil Works Of Control Room Building And S.D.O. Office At 33/11 K.V. S/S Hakikat Nagar Distt. Saharanpur, 1 Excavation in foundation in ordinary soil (loam, clay or sand) including lift upto 1.5 Metreand lead upto 30 metreincluding filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation or in to the plinth and removal & disposal of surplus earth as directes by the E/I up to a distance of 30m from the foundation trenches. CSI No. 4.01 2 Clearing jungle including uprooting of rank vegetations, grass, bush,wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. CSI No. 4.08 3 Earth filling under floors and/or scorporation area including cost of earth obtained with in 8 kmoutside UPPCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. CSI No. 4.10 4 Concrete with 4cm gauge I class brickballast, coarse sandand cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion.CSI No. 5.01 5 Cement concrete with 2cm gauge approved hard stone ballast, coarse sandand cement in proportion 4:2:1 including supply of all material, labour side shuttering if required and T&P etc. Required for proper completion of the work.CSI No. 5.06 6 Cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 3:1.5:1 including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of workCSI No. 5.21 7 Precast cement concrete door sills, chaukhatsboundary posts, shelves and similar small work with cement, approved coarse sand 2cm gauge graded approved hard stone ballast in the proportion 1:1.5:1 excluding reinforcement but including fixing the same in position including cost of all other material, labour and T&P CSI No. 5.22 8 RCC work with cement approved coarse sand and 2cm gauge graded approved hard stone ballast likeranite, quartzite etc. in proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . CSI No. 5.23 9 RCC work with cement, approved coarse sandand2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.CSI No. 5.24 10 RCC work with cement, approved coarse sandand2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3inlighter beams i.e. having span upto6m, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.CSI No. 5.25 11 RCC work with cement approved coarse sandand 2cm gauge graded approved hard stone ballast likeranite, quartzite etc. from Dalda, Jhansi or other quarries in proportion 1:1.5:3 in raft foundation and footing, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&PCSI No. 5.27 12 RCC work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in RCC T beam-slab and column, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.CSI No. 5.29 13 First class brick work in 1:6 cement and coarse sand mortar in foundation and plinth workincluding supply of all materials, labour & T&P etc required proper completion of work. CSI No. 6.01 14 First class brick work in 1:6 cement and coarse sand mortar in foundation one brick thickness. and work plinth including supply of all materials, labour & T&P etc required proper completion of work. CSI No. 6.01+08 15 Firstclass brick work in 1:4 cement and coarse sandmortar in foundation and plinth, for walls of ½ brick(115mm) thickness, add for extra labour to the rates including supply of all materials, labour & T&P etc. required for proper completion of work. CSI No. 6.03+6.09 16 Brick work in foundation & plinth with old dismantledbricks (supplied by department free of cost) and coarse sand mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. CSI No. 6.18 17 Same as in item 6.18 above butin super structure for 230 mm thick wall. CSI No. 6.19 18 2.5 cm. thick damp proof course of cement concrete consisting of 1 part cement 1.5 parts approved coarse sand (F.M.1.8 to 2.5), and3 parts approved 12 mm. graded stone grit and also including liquidwater proofing material as approved by the Engineer-Incharge in the proportions specified by the manufacturer.CSI No. 7.02 19 Fixing of Departmental doors & windows shutters including supply& fixing of hinges and other fixtures.(excluding their supply) including all materials,labour & T&P etc. required for proper completion of work. CSI No. 8.51 20 Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials,labour & T&P etc. required for proper completion of work. CSI No. 8.54 21 Supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P.CSI No. 8.60 22 Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.CSI No. 9.01 23 TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) . CSI No. 9.03 24 Supply and fixing galvanised mosquito proof jali (16x24 gauge) withM.S. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame.CSI No. 9.18 25 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. CSI No. 11.07 26 Add for extra labour to all items of plaster if done in ceiling.CSI No. 11.10 27 Add for extra labour and materials for plaster over rough face of one brick thick wall. CSI No. 11.12 28 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of onepart of cement and two parts of approved coarse sand laid inpanels finished with 3mm.floating coat of neat cement or cementand marble dust in ratio of 5:1 including supply of all materials, labour & T&P etc. required for proper completion of the work.CSI No. 11.13 29 S/mixing approved water proofing compound (CICO, DR FIXIT etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer.CSI No. 11.15 30 6mm thick plaster with 1:3 cement & coarse sand including all material, labour and T&P etc required for proper completion of work.CSI No. 11.17 31 Making drip coarse (25x12) mm in 1:2 cement and coarse sandincluding supply of all materials, labour and T&P etc requiredfor proper completion of work. CSI No. 11.19 32 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumption 0.044 bag/Sq.m.). CSI No. 11.20 33 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC. CSI No. 12.04 34 First class bricks on edge floor laid dry, joints sand filled,including preparation of base to proper slope and its rammingincluding supply of all material labour & T&P etc. required forproper completion of the work. CSI No. 12.07 35 Supply and laying 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make, laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete including supply of all materials, labour and T&P etc required for proper completion of work.CSI No. 12.11 36 Supply and Laying 6 mm thickglazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and T&P etc. completion required for proper completion of the work.CSI No. 12.12 37 Providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& T&P etc. required for proper completion of work.CSI No. 12.14 38 Providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand (Bell, Johnson or equi. make)size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work.CSI No. 12.18 39 Painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint Luxol or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. CSI No. 13.01 40 Same as in item 13.01 above but for every coat after first coat.CSI No. 13.02 41 Same as in item 13.01 above but for every coat on previously paintedold wood or iron work including its sand papering,rubbing andcleaning as required, for proper completion of work. CSI No. 13.03 42 One priming coat and one coat oil bound distemper on new work includingsupply of all materials,labour and T&P etc. required for propercompletion of the work. CSI No. 13.08 43 Same as in item 13.08 but for every coat after the first coat. CSI No. 13.09 44 Same as in item 13.08 but for every coat on previously old oil bound distemper surface. CSI No. 13.10 45 Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. CSI No. 13.20 46 Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work. CSI No. 13.21 47 Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (Well prepared with Birla putty and one coat of primer of ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour & T&P etc. required for proper completion of work. CSI No. 13.22 48 Same as in item no 13.22 above but for every coat of additional APEX or equivalent brand weather coat paintCSI No. 13.23 49 Same as in item no 13.22 above but for each coat APEX or equivalent brand weather coat paint on previously treated surface CSI No. 13.24 50 Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres. CSI No. 15.01 51 Dismantling reinforced cement concrete or reinforced brick work,including stacking of dismantled materials as directed by theEngineer-Incharge within a distance of 60 metres. CSI No. 15.03 52 Dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the Engineer In-charge within a distanceof 60 metres.CSI No. 15.05 53 Dismantling doors or window leaves including stacking ofmaterials as directed by the Engineer I/C within a dist. 60 M.CSI No. 15.09 54 Dismantaling doors and windowschowkhatsincluding stacking of materials as directed by Engg-in-Charge within a distance of 60 meters. CSI No. 15.10 55 Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M. CSI No. 15.11 56 Scrapping old white or colour wash or distemper including disposal of refuseas directed by the Engineer-I/C within a distance of 60 M.CSI No. 15.12 57 Dismantling of existing damaged Mud Faska over the roof, Clearing the surface with wire, brush, removal and disposal of rubbish at a distance 100 meters also including the cost of clearing and stocking of usable materials etc. including all labour, materials required for proper completion of work. CSI No. 15.14 58 Dismantling of B.O.E. Floors and stacking of dismantled bricks as per direction of Engineer-in-charge within distance of 60 meters lead.CSI No. 15.16 59 Dismantling and re-laying of dry B.O.E floor including coat of all labour and T&P required for proper completion of work. CSI No. 15.18 60 Repair to plaster or patches including removal of old plaster racking out joints to 1 cm. (3/8”) depth, watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and T&P etc. required for proper completion of the work.CSI No. 20.02 61 Renewing panes of 4.8 to 5.7 mm glass Panesincluding supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(a) glass of 4 mm thick. CSI No. 20.04 (b) 62 Fixing panes of glass with and including putty brads and including supply of all materials, labour and T&P etc. required for proper completion of the work but excluding cost of glass.CSI No. 20.07 63 As in item No.20.07 above but with wooden beading.CSI No. 20.08 64 Cleaning panes of glass with spirit of caustic soda including supply of all materials, labour and T&P etc. required for proper completion of the work. . CSI No. 20.09 65 Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. CSI No. 20.12 66 Disposal of rubbish / debris out side the UPPCL direction of Er/in-charge including cartage, labour and materials, T&P etc.required for proper completion of the work. (No. deduction for voids shall be made). CSI No. 20.16 67 Supply and replacing L drops 16 mm dia x 300 long.of following chromium polished iron fittings including cost of nuts, bolts etc.complete.CSI No. 20.17 (a) 68 Supply and replacing of Tower bolts 10 mm dia x100mm long.CSI No. 20.17 (c) 69 Supply and replacing of M.S. handles 100 mm size. CSI No. 20.17 (f) 70 Supply and replacing of L-drop 16 mm dia x 200 mm long. CSI No. 20.17 (h) 71 S/laying chicken mesh of (20mm) hexagonal heavy quality over roofs of joints of roof a per direction of the Engineer – in- charge. CSI No. 20.21 72 Supplyand replacing of Angle Holder of “Anchor” or Equivalent make of approved quality including all materials, labour and T&P etc.CSI No. 22.01 73 Supplyand replacing of 6 Amp. Plano tyre switch of “Anchor” or Equivalent make of approved quality including all materials, labour and T&P etc. CSI No. 22.02 74 Supplyand replacing of 6 Amp. Plano tyre socketof “Anchor” or Equivalent make of approved quality including all materials, labour and T&P etc. CSI No. 22.03 75 Supplyand replacing of 16 Amp. Plano tyre switch of “Anchor” or Equivalent make of approved quality including all materials, labour and T&P etc.CSI No. 22.04 76 Supplyand replacing of 16 Amp. Plano tyre socket of “Anchor” or Equivalent make of approved quality including all materials, labour and T&P etc. CSI No. 22.05 77 Supply and laying 1.5Sq.mm gauge copper wire of Plaza orequivalent make of approved quality including connecting withexisting wiring in existingP.V.C.pipe. including allmaterials, labour and T&P complete.CSI No. 22.06 (a) 78 Supply and laying 2.5Sq.mm gauge copper wire of Plaza orequivalent make of approved quality including connecting withexisting wiring in existingP.V.C.pipe. including allmaterials, labour and T&P complete.CSI No. 22.06 (b) 79 Cutting down trees (exceeding 30 cm. grith) grubbing up roots, filling pits and leveling off ground, lopping branches trimming removing (not exceeding 50 metres) and stacking serviceable materials and cleaning side. CSI No. 22.12 (a) 80 Cleaning and sweeping of roof of residence as and when requiredincluding uprooting of rank vegetation and disposal of thegarbage upto 50 M. CSI No. 22.20 81 Providing and fixing half turn15mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for propercompletion of work. CSI No. 26.05 (a) 82 Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.06 (a) 83 Providing and fixing PVC BALL FLOAT VALVE 20 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.06 (b ) 84 Providing and fixing NON RETURN REFLEX VALVE, 15 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.07 (a) 85 Providing and fixing NON RETURN REFLEX VALVE, 20 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.CSI No. 26.07 (b) 86 Providing and fixing PVC CONNECTION PIPE, 450X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.CSI No. 26.09 (b) 87 P/F GI UNIONS NOMINAL BORE 15 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.10 (a) 88 P/F GI UNIONS 20 mm NOMINAL BORE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.10 (b) 89 Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work. CSI No. 26.12 90 P/F BARSS STOP COCK, 20 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.14 (b) 91 Providing and fixing CP BRASS Angle ValveHEAVY QUALITY (400gm) (L&K and equi.) fitting, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.CSI No. 26.16 (i) 92 Providing and fixing CP BRASS Piller Cock HEAVY QUALITY (400gm) (L&K and equi.) fitting, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.CSI No. 26.16 (j) 93 Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work.CSI No. 26.17 94 Providing and fixing of 15 mm dia ISI Approved CPVC pipes complete with special such as bend tee, socket, cross, clamp etc earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed GI fitting where required cutting and making good the walls etc. and all mareials, labour and T&P complete.CSI No. 26.19 95 Providing and fixing of 20 mm dia ISI Approved CPVC pipes complete with special such as bend tee, socket, cross, clamp etc earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed GI fitting where required cutting and making good the walls etc. and all mareials, labour and T&P complete.CSI No. 26.20 96 Providing and fixing of 25 mm dia ISI Approved CPVC pipes complete with special such as bend tee, socket, cross, clamp etc earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed GI fitting where required cutting and making good the walls etc. and all mareials, labour and T&P complete.CSI No. 26.21 97 Providing and fixing first quality white glazed “Orissa” pattern W.C. pan Hindustan, Cera make. Size 580 mm. (Hindustan, Cera make) with out “P” rap including supply of all labour, material, T&P etc complete required for proper completion of work. CSI No. 27.01 98 Same as in item no. 27.01 but of European type. CSI No. 27.02 99 Providing and fixing PLASTIC SEAT COVERCOMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKEDincluding supply of all materials,labour and T&P etc.complete. CSI No. 27.04 100 Providing and fixing 510X400 mm wash hand basin of white glazed earthern ware first quality I.S.I marked (Hindusatan, Neycer / Cera make) including supply of all labour, material, T&P etc. complete required for proper completion of work.CSI No. 27.09 101 Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work.CSI No. 27.12 102 Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work. CSI No. 27.13 103 Providing and fixing in position 32 mm. dia P.V.C.WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work. CSI No. 27.14 104 Providing and fixing M.S. holder bat clamps of approved design including supply of all materials, labour and T&P etc. required for proper completion of the work for 100 mm dia pipe. CSI No. 27.20 (a) 105 As above 75 mm dia pipe.CSI No. 27.20 (b) 106 Supply and fixing 100 mm.PVC trap India make of heavy approved quality complete with CI grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. CSI No. 27.21(b) 107 Providing and fixing 100 mm dia PVC “P”or “S” trap including CEMENT CONCRETE AND ALLmaterial, labour T&P etc. required for proper completion of work. CSI No. 27.24 108 Providing and laying 75 mm Dia. SWR,PVC (Finolex or equivalent) pipe including cost of excavation, C.C. etc. including its jointing and connection, all material, labour cartageT&P etc. required for proper completion of work.CSI No. 27.29 (a) 109 Providing and laying 110 mm Dia. SWR,PVC (Finolex or equivalent) pipe including cost of excavation, C.C. etc. including its jointing and connection, all material, labour cartageT&P etc. required for proper completion of work.CSI No. 27.29 (c) 110 Applying two coat Tapcrete mixed with White Cement and water to proper consistany on leaky surface including supply of all material, labour etc. required for proper completion of work.CSI No. 28.16 111 .Providing and applying plaster of paris putty of 2 mm thickness over plaster surface to prepare the surface even and smooth complete. CSI No. 28.27 112 Providing and laying Integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-In- charge over the RCC slab including adjoining walls up to 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with50% of cement mortar 1:5(1 cement :5 coarse sand) admixed with water proofing compound conforming ti IS : 2645 and approved by Engineer-In- charge to required stope and treating simllarlythe adjoining wall upto 300 mm height including rounding of Junction of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/and approved by Engineer –in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar if mix 1:4(1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-In-charge including laying glass fiber cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minium period of two weeks for curing and for final test”, All above opeations to be done in order and as directed and specified by the Engineer-in-charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. CSI No. 28.28

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 04-07-2024 DATE EXTENDED Date 15-07-2024
2 16-07-2024 Bid Submission Date Extension Date 24-07-2024
3 25-07-2024 BID SUBMISSION DATE EXTEND Date 31-07-2024

Key Value

Document Fees
INR 1180 /-
EMD
INR 11000.0 /-
Tender Value
INR 5.94 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail