tender for Modification And Maintenance Under Operation Kayakalp For J.H.S And P.S Balance Work In (Zone-05) Phase-2 Yeidawc-06, 1 Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (UPPWD SOR) 2 Cement concrete with 4cmgauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all material, Labour, Tools&plants etc required for proper completion of the work. 3 Centringand shutteringincluding strutting, propping etc. andremoval of form for : Foundations,footings, basesof columns etc.for mass concrete. 4 Centringand shutteringincluding strutting, propping etc. andremoval of form for : Lintels,beams,plinth beams,girders, bressumer sand cantilevers. 5 Centringand shutteringincluding strutting, propping etc. andremoval of form for : Columns,Pillars, Piers, Abutments, Posts and Struts 6 Centringand shutteringincluding strutting, propping etc. andremoval of form for : Slab 7 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 8 RCC work with cement approved coarse sand & 2cm gauge approved stone grit in proportion of 1:1.5:3 in lintel of door & windows excluding supply of reinforcement & its bending but including its fixing and binding necessary centering & shuttering etc and supply of all materials labour tools & plants etc 9 Reinforcement for rcc work all complete upto plinth level mild steel and medium tensile steel bar 10 B/W with bricks of class 150 in foundation & plinth in CM 1:4 (Based on UP PWD SOR 2020) Cement mortar 1:4 ( 1cement :4Coarse sand) 11 B/W with bricks of class 150 Above Plinth in CM 1:4 (Based on UP PWD SOR 2020) 12 12mm cement plaster of mix: 1:4 (1 cement : 4 coarse sand)BASED on UP PWD SOR 2020 13 15mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand)BASED on UP PWD SOR 2020 14 Finishing walls with water Proof cement paint of approved make and quality on new wood with two coats to give an even shade including supply of material, labour, and tools and plants etc required : new work with two or more coats. 15 Providing precast cement concrete JaIl 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits.50 mm thick 16 Structural Steel work riverted boltedor welded in bulit up sectiontrusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete UPPWD SOR 17 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: 18 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufactures) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc complete. size of Tile 600x600mm (DAR/11.41.2/Based on UPPWD/SOR- 2020) 19 Providing & Fixing 1st Quality Ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture) of approved make in all coloursshades except burgundy bottle green colour, black of any size as approved by engineer in charge in skirting rises of stepsand dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 Coarse sand) and joining with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete (DAR/8.31/Based on UPPWD SOR -2020) 20 Providing wall Putty on old new surface with approved quality material of berger /j.k / birla or similar make 2 coats 21 Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade 22 Finishing walls with water Proof cement paint of approved make and quality on new wood with two coats to give an even shade including supply of material, labour, and tools and plants etc required : new work with two or more coats. 23 Supply of good earth, banking, earth in layers not exceeding 20cm in depth clods watering rolling each layers with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layers with power roller of minimum 8 tonnes and dressing up in embankment for roads flood bank marginal bank and guide bank or filling up ground depression as per MORTH. All kinds of soils (only for where mechanical cant be reach/ move) (based on SOR) 24 Providing & Fixing brass bib cock of approved quality 15mm nominal bore (DAR/18.15.1/Based on UPPWD/SOR-2020) 25 Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and over flow pipes but with out fittings and the base support for tank (DAR/18.48/Based on UPPWD/SOR-2020) 26 Providing & Fixing20mm to 25mm CPVC pipe dia nominal bore for lowering of pump set including all material labour t&p etc25mm nominal inner dia pipes (DAR/18.8.3/Based on UPPWD/SOR-2020) 27 Providing and fixing gum metal gate valve CI wheel of approved quality 25mm nominal bore (DAR/18.17.1/Based on UPPWD/SOR-2020) 28 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (Based on SOR UP PWD 2020) 29 Providing and laying 60 mm thick factory made cement concreteinterlockingpaver block(ISI Marked) made by block making machine withstrong vibratory compaction of approved size design, shape, laid inrequired color and pattern over and including average50 mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per direction of Engineer-in - charge with conforming (UP PWD SOR 2020) (New SOR Based DSR 16.68) 30 Cement concrete with 4cm based approved stone ballast coarse sand and cement in the proportion of 4:2:1 including supply of all material labour tools and plants etc required for all completion of work (item code 5.06) 1:2:4 (1cement :2coarse sand : 4 graded stone aggregate 20mm nominal size) 31 Providing and laying integral cement based water proffing treatment including prepartion of surface as required for treatment of roofs, balconies,terrace etc 32 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110mmdia Pipes.(DAR/12.41.2/Based on UPPWD/SOR-2020) 33 Providing and fixing ISI flush door shutters conforming to IS:2022 (Part-1) non decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30mm thick including ISI marked stainless steel butthinges with necessary screws (DAR/9.21.2/Based on UPPWD/SOR-2020) 34 Providing & Fixing wash basin 15mm CP brass pillars taps 32mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls where ever require :white vitreous china wash basin size 630X450mm with a pair of 15mm CP brass pillar taps (DAR/17.7.1?Based on UPPWD/SOR-2020) 35 Providing & Fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast ironP or S trap 10ltr low level white pvc flushing cistern including flush pipe with manually controlled device IS :7231 WC 580x 440mm (DSR 18/17.1.1/Based on UPPWD/SOR-2020) 36 Providing and Fixing white viterous china flat back or wall corner typr lipped front urinal basin of 430x260x350 mm and 340x410x265 mm size respectively with automatic flushing 37 Providing and fixing 600x450mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete (DAR/17.31/Based on UPPWD SOR-2020) 38 Providing & Fixing Vertical grab rail as approved quality as per direction of E/I rate and language based on CWSN Toilet 39 Bench for class room 40 Lettering with black japan paint of approved brand and manufacture DAR/13.71/Based on UPPWD/SOR-2020) 41 Supply & Errected ceiling fan 120mm including regulator
