Tender For Maintenance Work Of Block-C Of Chauphatka Residential Colony Under Honble High Court Allahabad, 1 Supply And Fixing Of C.P. Brass Wall Khuti Including All Charges Etc Complete. 2 Supply And Fixing Of Parada Rod With Bracket Including All C, Prayagraj-Uttar Pradesh

Tender For Maintenance Work Of Block-C Of Chauphatka Residential Colony Under Honble High Court Allahabad, 1 Supply and fixing of C.P. Brass wall khuti including all charges etc complete. 2 Supply and fixing of Parada Rod with bracket including all charges etc complete. 3 Supply and fixing of Door Stopper including all charges etc complete. 4 Supply and fixing of PVC Pipe 4 dia including all charges et complete. 5 Supply and fixing of PVC Pipe 3 dia including all charges etc complete. 6 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. As per DSR No.9.20.1 7 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). As per DSR No.14.5.1 8 Supply and fixing of PVC lid connection 18 long including all charges etc complete. 9 Supply and fixing of PVC cistren handle including all charges etc complete. 10 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. As per DSR No.10.29.1 11 Supply and fixing of C.P. Brass Swan neck pillor cock including all charges etc complete. 12 Supply and fixing of C.P. Brass Angle Valve including all charges etc complete. 13 Supply and fixing of Door closer including all charges etc complete. 14 Supply and fixing of C.P. brass Pillor cock including all charges etc complete. 15 Supply and fixing of C.P. brass short body bib cock including all charges etc complete. 16 Supply and fixing of PVC vest pipe including all charges etc complete. 17 Supply and fixing of C.P. Brass basin mixture including all charges etc complete. 18 Supply and fixing of 6 long aluminum sitkani including all charges etc complete. 19 Supply and fixing of 6 long aluminum handle including all charges etc complete. 20 Supply and fixing of C.P. Brass spendal including all charges etc complete. 21 Supply and fixing of PVC. Comode cover white colour including all charges etc complete. 22 Supply and fixing of C.P. Brass two way angle valve including all charges etc complete. 23 Supply and fixing of C.P. Brass 4 Size wall shower including all charges etc complete. 24 Supply and fixing of 24 guage Aluminium sheet on toilet door shutters bottom including fixing with Aluminium Greves, labour including labour T&P etc. required for proper completion of the work. 25 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. As per DSR No. 17.1.1 26 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. As per DSR No.17.3.1 27 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. As per DSR No.17.7A 28 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. As per DSR No.17.8 29 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per DSR No.17.31 30 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. As per DSR No.17.33 31 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one coats). As per DSR No.13.81.1 32 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (Two coats). As per DSR No.13.81.1 33 12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand). As per DSR No.13.1.2 34 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. As per DSR No.11.37 35 Supply and fixing of 15 mm dia Gate valve including costof all material, labour T&P etc required for the proper completion of the work. As per direction of E/I. 36 Supply and fixing of 25 mm dia Gate valve including costof all material, labour T&P etc required for the proper completion of the work. As per direction of E/I. 37 Supply and fixing of 40 mm dia Gate valve including costof all material, labour T&P etc required for the proper completion of the work. As per direction of E/I. 38 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work. As per DSR No.13.99.1

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	02-07-2024	Date Extension 03/07/24To10/07/2024	Date	10-07-2024
2	24-06-2024	Date Extension	Date	03-07-2024

INR 766 /-

INR 100000.0 /-

INR 10 Lakhs /-