1. Supply And Fixing Of Public Utility Items In Various Park In Municipal Area. , Providing And Fixing Cross Trainer Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 1320Mm (Length) X 600Mm (Width) X 1750Mm. (Height). Safe Area:- 1.77 X 1.2Mtr. Cross Trainer Equipment Made From “B” Class G.I. Pipe Of Different Nb. The Main Frame Pipes Are Of 80Nb “B” Class G.I. Pipe With Single Bend Pipe With 250Mm Radius. The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thick. The Handle Frame Is Made Up Of 25Nb “B” Class G.I.Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mmcrc Square Pipes Of 3Mm Thickness. To Build Structure Bushes Are Used Which Are Made From M.S.Seamless Pipe Of 60Mm Od. With 5 Mm Thickness. The Footrests Are Made From Aluminum Casting Material Of Size 130 Mm X 310Mmx5mm Thickness And Mounted On M.S. Plate Of Size 130Mm X 310Mm X 3Mm Thick Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. Pins Used Of Diameter 35Mm, 25Mm, And 17Mm Are Made Up From Sae 8620 Bright . The Bearings Used Are Of “6007Zz” “6205Zz” And“6203Zz”Permanent Lubricated Sealed Bearing Ofreputed Brand. High Tensile Steel With Galvanized Nuts And Bolts Are Used For Assembly. The Powder Coating Is Done With Pure Polyester Powders Of Ackzonoble Or Berger Paints With 60 To 70Micron Thickness. A16 , A 24 Mm Circlips Are Used For Assembly. Bolt M8x16 Mm And Ny Lock Nut Of M8 Made Of Ss 304 Used On Nylon Cap Mounted On Pins To Protect Bearings And Pins From Rain And Dust. , Providing And Fixingseated Pullar Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Belowdimensions: - 1900Mm (Length) X 740Mm (Width) X 1920Mm. (Height).Safe Area:- 1.2Mtr X 3Mtr Seated Puller Equipment Made Up Of “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Center Pipe Is Of 100Nb Made From “B” Class G.I. Pipe. Bottom Support Is Of M.S. Round Plate Of Ø 250 Mm & 10Mm Thickness Is Welded. All Linkages Are Made Up Of 25Nb “B” Class G.I. Pipe. The Handle Frame Is Of 32Nb “B” Class G.I. Pipe. The Seat Frame Is Of 32Nb “B” Class G.I. Pipe, To Build Structure Bushes Are Used Which Are Made From Seamless Pipe Of 60Mm O.D. And 5Mm Thickness As Well As 60Mm Diameter Solid Bar Bush Is Used. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class.Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick.Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness. Foundation Cover Closing Cap Is Made Fromfrpmaterial With 0.7 Mm Thickness. The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330 Mm X 300 Mmx2mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. Pins Used Of Diameter 25Mm And 17Mm Are Made Up From Sae 8620 Bright Material. The Bearings Used Are Of“ 6205Zz” And “6203Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Cerclips Used For Assembly Are Of A16 The Powder Coating Done With Pure Polyester Powders Ofackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing And Fixingrower Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 1200Mm (Length) X 1000Mm (Width) X 920Mm. (Height)Safe Area: - 1.5Mtr. X 1.5Mtr. Rower Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Main Frame Is Of 80Nb “B” Class G.I.. Pipe Welded With M.S. Round Plate Of 250Mm X 10Mm. The Handle Frame 25Nb Is Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness. To Join The Movement Frame To Main Frame Connecting Links Made Up From 32 Nb G.I. “B” Class Pipe. The Seat Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330 Mm X300mm X 2Mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. Pins Used Of Diameter 17Mm Are Made Up From Sae 8620 Bright Material. The Bearings Used Are Of “6203Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nuts And Bolts Are Used For Assembly. The P.U. Bushes (Stopper) Used To Avoid The Collision. The Circlips Used For Assembly Is Of A 16 The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. Includes As The Cost/Unit Ie. , Providing And Fixing Chest Press Including Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 2000Mm (Length) X 710Mm (Width) X 2200Mm. (Height). Safe Area: - 3.0Mtr X 1.7Mtr. Chest Press Equipment Made Up Of “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Center Pipe Is Of 100Nb Made Up Of “B” Class G.I. Pipe. The Bottom Welded With Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thickness. The Connecting Pipes Are Made Up From 25Nb “B” Class G.I. Pipe. The Handle Frame Is Made Up From 32Nb “B” Class G.I. Pipe. To Build Structure Bushes Are Used Which Are Made From Ms Seamless Pipe Of 60Mm O.D. And 5Mm Thickness As Well As 60Mm Diameter Solid Bar Bush Is Used. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S.Angles Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness. The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330 Mm X 300 Mmx2mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. Foundation Cover Closing Cap Is Made Fromfrpmaterial With 0.7Thickness. Pins Used Of Diameter 25Mm And 17Mm Are Made Up From Sae 8620 Bright Material. Bolt M8x16 Mm And Nylock Nut Of M8 Made Of Ss 304 Used On Nylon Cap Mounted On Pins To Protect Bearings And Pins From Rain And Dust. The Bearings Used Are Of “6205Zz” & “6203Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Cerclips Used For Locking Is Made Up Of A24 Mm & A16mm. The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing And Fixing Leg Press Including Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 1840Mm (Length) X 360Mm (Width) X 1560Mm. (Height). Safe Area:- 2.8 X 1.4Mtr. Leg Press Equipment Made From“B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Center Pipe Is Of 100Mm Nb Made From“B” Class G.I. Pipe. The Sleeve Frame Is Of 100 Od And Of M.S. Seamless Pipe With Thickness 5Mm. This Sleevecan Be Disassembled From Main Frame. The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thick. The Remaining Outer Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is Structure And Made From Center Pipe Of G.I. Of 80Mm Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angle Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipe Of 3Mm Thickness. Seat & Back Rest Provided Are Made Up Of Ms Deep Draw Quantity Of 2Mm Thickness With No Joint With Uniform Outer Edge Radius 20Mm. The Footrests Are Made From Casted Aluminum Material, Having Sizes 130Mm X 310Mm X 5Mm Thick. With The Support Of 310Mm X 130Mm X 3Mm Thick Ms Plate. The Frame Of Footrests Made Up Of 25 Nb “B” Class G.I. Pipe. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. To Build Structure Bushes Are Used Which Are Made From M.S. Seamless Pipe Of 50Mm O.D. And 5Mm Thickness. The Pins Used Are Made Up Of Ø25 Mm Sae 8620 Bright Material. The Bearings Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. The Cerclips Used For Assembly Are Of A24 Mm. The Powder Coating Done With Pure Polyester Powder Of Ackzonoble Or Berger With 60 To 70 Micron Thickness. Includes As The Cost/Unit Ie. Rate Include Basic Item Cost 12.5% Excise And 5% Cst, Transportation & Fitting Charges Transit Insurance. , Providing And Fixing Uneven Bar Including Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 3200Mm (Length) X 1360Mm (Width) X 2850Mm.(Height). Safe Area: - 5.4Mtr X 5.2Mtr Uneven Bar Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Main Frame Of 100 Nb Made From “B” Class G.I. Pipe, And The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thickness Is Welded At Bottom. The Handle Frame Is Of 32Mm Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness. Closing Caps Are Made From Aluminum Casting Of 3 Mm Thickness. The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70Micron Thickness. , Providing And Fixing Bench With Fix Weight Including Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Product Dimensions: - 1220Mm (Length) X 1220Mm (Width) X1110 Mm (Height). Safe Workout Area: - 2500Mm (Length) X2000mm (Width). Bench With Fixed Weight Lift Equipment Made Up Of “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Main Frame Having Pipe 50 Mm Nb Made Up Of “B” Class G.I. Pipe. The Middle Connecting Pipes Are Made Up From 40Mm X 20Mm Rectangular Ms Pipe. The Handle Bar Made From 25Mm Od Solid Ms Bar. The Structure Having Hole Pass Provision For Foundation Weight Plates Are Made From Iron Casting Material Which Is Permanently Attached With 25Mm Ms Solid Bar. The Powder Coating Is Done By Pure Polyester Powder With 60 To 70 Micron Thickness. , Providing And Fixing Sky Walker Including Filting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowedimensions: - 1720Mm (Length) X 630Mm (Width) X 1750Mm.(Height) Safe Area: - 2.7Mtr X 1.6Mtr.Sky Walker Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Main Frame Pipe Is Of 80Mm Nb Made From “B” Class G.I. Material Which Is Bend At The Radius Of 250Mm. The Leg Movement Frame Is Of 50 X 50Mm X 3Mm Thick Crc Square Pipe. Sleeves Are Made Up Of 100 Mm Od M.S. Pipe With Thickness 5Mm. This Results In Easy Replacement Of Bearings, Pins And Handle. The Handle Frame Is Of 25Mm Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class.Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick.Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness. Two Foundations Are Provided For Rigid Support. The Footrests Made From Aluminum Casting Material Of Size 130 X 310 X 5Mm. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Pins Used Are Made Up Of Ø 25Mm Sae8620 Bright Material. Pins Are Fixed At The Outer End With M8 Grub Screws And Dia.8Mm Ss Ball. The Bearings Used Are “6205Zz” Are Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Cerclips Used For Assembly Are Of A24 Type. The Powder Coating Is Done With Pure Polyester Powderof Ackzonoble Or Berger With 60 To 70 Micron Thickness. , Providing And Fixing Bench With Dumble Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Product Dimensions: - 2350Mm (Length) X660 Mm (Width) X600 Mm (Height). Safe Workout Area: - 3500Mm (Length) X 2000 Mm (Width). Bench With Fixed Dumbell Equipment Made Up Of “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Main Frame Having Pipe 50 Mm Nb Made Up Of “B” Class G.I. Pipe. The Middle Connecting Pipes Are Made Up From 40Mm X 20Mm Rectangular Ms Pipe. The Handle Frame Is Made Up From 32Nb “B” Class G.I. Pipe. To Build Structure Bushes Are Used Which Are Made From Seamless Pipe Of 50Mm O.D. And 6Mm Thickness As Well As 25Mm Outer Diameter Solid Bar Is Used. The Structure Having Hole Pass Provision For Foundation Weight Plates Are Made From Iron Casting Material Which Is Permanently Attached With 25Mm Ms Solid Bar. Shaft Used Of Diameter 25Mm Made Up From Sae 8620 Bright Material.The Bearings Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand (Fag/Skf). The Cerclips Used For Locking Is Made Up Of Ø25 Mm. The Powder Coating Is Done By Pure Polyester Powder With 60 To 70 Micron Thickness. , Providing And Fixing Triple Standing Twister Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Dimensions: - 1150Mm (Length) X 1150Mm (Width) X 1580Mm. (Height). Safe Area: - Ø2.1Mtr. Triple Twister Made From “B” Class Galvanized Iron (G.I.) Pipe Ofdifferent Nb Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. The Center Pipe Is Of 100Nb Made From “B” Class G.I. Round Pipe. The Bottom Support Welded Is Of M.S. Round Plate Of Ø250 Mm & 10Mm Thick. The Standing Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Handle Frame Of Triple Twister Is Of 25 Mm Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80Mm Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angle Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipe Of 3Mm Thickness The Standing Plate Is Fitted On The Frame Made Up Of Ø 80 Nb Gi. Pipe. M.S. Round Plate Of Size Ø300mm X 10Mm Thickness. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Pins Used Are Made Up Of Ø 35 Mm Sae 8620 Bright Material. The Bearings Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness Includes As The Cost/Unit Ie. Rate Include Basic Item Cost 12.5% Excise And 5% Cst, Transportation & Fitting Charges Transit Insurance. , Providing And Fixing Shoulder Builder Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Dimensions: - 900Mm (Length) X 900Mm (Width) X 1580Mm (Height). Safe Area:- 1.9Mtr X 1.9Mtr Shoulder Builder Equipment Made From“B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Center Pipe Is Of 100Mmnb Made From“B” Class G.I. Pipe, And The Bottom Support Of M.S. Round Plate Of 250 Mm Diameter & 10Mm Thickness. Sleeve Provided Of M.S. Seamless Pipe Of Outer Diameter 125Mm With Thickness 5Mm Provided. The Handle Movement Frame Is Of 25Mm Nb Made From“B”Class G.I. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80Mm Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angle Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipe Of 3Mm .Thickness. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Pins Used Are Made Up Of Ø 25 Mm Of Sae8620 Bright Material. The Bearing Used Is “6201Zz” & “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. The Cerclips Used For Assembly Is Of A 24. The Nylon Bush Is Used For Handle Knob. The Powder Coating Done With Pure Polyester Powder Of Ackzonoble Or Berger Paints With 60 To70 Micron Thick. , Providing And Fixing Air Walker Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Dimensions :- 1060Mm (Length) X 810Mm (Width) X 1600Mm. (Height). Safe Area: - 2.0 Meter X 1.8 Meter Air Walker Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Main Frame Pipe Is Of 80Mm Nb Made From “B” Class G.I. Material Which Is Bend At The Radius Of 250Mm. The Sleeve Frame Is Of 100 Od And Of M.S. Seamless Pipe With Thickness 5Mm. This Sleeve Can Be Easily Disassembled From Main Frame. The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thick. The Leg Movement Frame Is Of 32Nb Made From “B” Class G.I. Pipe. This Link Is Supported With Ms Flat Of Size 60X8mm. The Handle Frame Is Of 25Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness. Foundation Cover Closing Cap Is Made Fromfrpmaterial With 0.7 Mm Thickness. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. Pins Used Of Diameter 25Mm Are Made Up From Sae 8620 Bright Material. A24 Circlips Are Used For Assembly. The Bearings Used Are “6205Zz” Permanent Lubricated Sealed Bearing Of Repute Brand. High Tensile Steel Galvanized Nuts & Bolts Are Used For Assembly. The Powder Coating Is Done By Pure Polyester Powder Of Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. The Footrests Are Made From Casted Aluminum Material, Having Sizes 130Mm X 310Mm X 5Mm Thick. With The Support Of 250Mm X 115Mm X 3Mm Thick Ms Plate. To Build Structure Bushes Are Used Which Are Made From M.S.Seamless Pipe Of 60Mm O.D.And 5Mm Thickness As Well As 60Mm Diameter Solid Bar Bush Is Used. Bolt M8x16 Mm And Nylock Nut Of M8 Made Of Ss 304 Used On Nylon Cap Mounted On Pins To Protect Bearings And Pins From Rain And Dust. , Providing And Fixing Stepper Cum Surf Board Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Dimensions: - 910Mm (Length) X 860Mm (Width) X 1400Mm.(Height). Safe Area: - 1.39 X 1.27Mtr. Surf Board Cum Stepper Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Center Pipe Is Of 100Mm Nb Made From “B” Class G.I. Pipe. The Bottom Support Welded Of M.S. Plate Of Ø 250 Mm & 10Mm Thickness. The Handle Frame Is Of32nb Made From “B”Class G.I. Pipe . The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80Nb“B” Class.Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick.Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness. Bushes Are Used 70Mm Outer Diameter With 5Mm Thickness Is Used. The Footrests Made From Aluminum Casting Material Of Size 320Mmx270mmx5mm. For Support To Footrest 200Mmx250mm With 3Mm Thickness M.S. Plate Used. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Pins Used Are Made Up Of Ø35 And Ø25 Mm Made From Sae 8620 Bright Matl. The Bearings Used Are Of “6007Zz” And “6205Zz” Permanent Lubricated Sealed Bearingof Reputed Brand. The P.U. Bushes (Stopper) Used To Avoid The Collision. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. The Cerclips Used For Assembly Are Of A24and A34 The Powder Coating Is Done With Pure Polyester Powder Of Ackzonoble Or Berger With 60 To 70 Micron Thickness. Includes As The Cost/Unit Ie. Rate Include Basic Item Cost 12.5% Excise And 5% Cst, Transportation & Fitting Charges Transit Insurance. , Providing And Fixing Knee Hip Riser Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Product Dimensions: - 2300Mm (Length) X 600Mm (Width) X 2200Mm (Height). Safe Workout Area: - 4000Mm (Length) X 1600Mm (Width). Knee/Hip Raise On Parallel Bars Equipment Made From “B”Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Main Frame Is 100Nb Made From “B”Class G.I. Pipe. M.S. Round Plates Of Ø250 Mm & 10Mm Thickness Are Welded At Bottom. The Handle Frame Is Of 32Nb, 60 Mm Nb And Made From “B” Class G.I. Pipe And 40Mm X 80Mm X3mm Thick Ms Pipe For Flat Surface, 20Mm X 40 Mm Ms Pipe Used For Flat Back Rest.The Bottom Support Of Handle Is Made From 80Mm X 40Mm X 3Mm Thickness Square Crc Pipe. The Foundation Used For Fixing Structure Having Hole Pass Provision. The Parallel Bars Are Made From 25Mm Dia Solid Ms Bar With Ms Square Pipe Support. Closing Caps Made From Top Quality Fiber Reinforced Plastic Material With 2 Mm Thickness. High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Powder Coating Done With Pure Polyester Powders With 60 To 70 Micron Thickness. , Providing And Fixing 4 In 1 (Seated Pullar , Leg Press, Surf Board, Seating Twister) Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Product Dimensions: - 2410Mm (Length) X 1720Mm (Width) X 2350Mm (Height). Safe Workout Area: - 4500Mm (Length) X 4500Mm (Width). Combination Made From “B” Class G.I. Pipe. The Center Ms Pipe Is Of 100Mmx100mm Size. Round Plate Of 250 Mm Diameter & 10Mm Thickness Is Welded At Bottom. The Links Are Made Up Of 25Mm Nb “B” Class G.I. Pipe. The Handle And Seat Frame Of Seated Puller Is Made From 32Mm Nb “B” Class G.I. Pipe. For The Assembly Different Bushes Are Used Which Is Made From Seamless Pipe Of 50Mm Od And 5Mm Thickness & 50Mm Solid Bar Is Used. Leg Press Center Frame Is Of 32Mm Nb Made From “B” Class Gi Pipe. The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330Mm X 300 Mmx2mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. The Leg Press Footrest Consists Of 25 Nb Made From “B” Class Gi Pipe. The Pins Used In Are Made Up Of 25 Mm Diameter Hardened Low Carbon Steel Material. The Nut Bolts Used For Assembly Are Made From S.S. Material. The Bushes (Stopper) Used To Avoid The Collusion Made From Poly Urethin Plastic Material Of 50 Mm Diameter. Surfing Frame Is Of 32Nb Made From “B” Class G.I. Pipe. Surf Board Handle Frame Is Of 25Nb Made From “B” Class G.I. Pipe. 300Mm Diameter X 10Mm Thick Plate Can Be Used For Rotating Seat Of Seating Twister With 50Nb Vertical G.I. Pipe. Closing Caps Made From High Quality Frp Material Which Is Of 2 Mm Thickness. The Pins Used Are Made Up Of 17Mm Diameter Solid Bar. The Bearing Used Are Of “6203, 6205” Permanent Lubricated Sealed Bearing Of Reputed Make. The Nut Bolts Used For Assembly Are Made From M.S. Pre-Galvanized Material. A17, A24, A34 Circlips Are Used For Assembly. The Footrests Are Made From Casted Aluminum Material, Having Sizes 130Mm X 310Mm X 5Mm Thick. With The Support Of 310Mm X 130Mm X 3Mm Thick Ms Plate.It Has Bolting Provision For Mounting On Concrete Slab. Polycarbonate Sheet Is Used For Roof With Supporting Frame Which Made From 25X25mm, 40X20mm Ms Pipes And 25Mm Nb “B” Class G.I. Pipe. Ms 8Mm Thick Round Plate Can Be Used For Splitting Roof Structure From Main Frame. The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With Minimum 60 To 70 Micron Thickness. , Providing And Fixing 3 In 1 (Leg Press, Air Waler,Surf Board) Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Dimensions: - 2300Mm (Length) X 860Mm (Width) X 1600Mm.(Height). Safe Area:- 1.39 X 1.27Mtr. Air Walker Cum Leg Press Cum Surf Board Equipment Made From “B” Class G.I. Pipe Of Different Nb.Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. The Main Frame Of 100Nb Made From “B” Class G.I. Pipe. The Sleeve Frame Is Of 100 Od And Of M.S. Seamless Pipe With Thickness 5Mm. This Sleeve Can Be Disassembled From Main Frame. The Bottom Support Frame Of M.S. 40Mm X80mmx3mm Thick C Channel. The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330Mm X 300 Mmx2mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. The Leg Movement Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Handle Frame Is Of 25Nb Made From “B” Class G.I. Pipe. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. Pins Used Of Diameter 25Mm Are Made Up From Sae 8620 Bright Material. Bolt M8x16 Mm And Nylock Nut Of M8 Made Of Ss 304 Used On Nylon Cap Mounted On Pins To Protect Bearings And Pins From Rain And Dust. The Bearings Used Are “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel Galvanized Nuts & Bolts Are Used For Assembly. A24 Mm Cerclips Are Used For Assembly. 300Mm Diameter X 10Mm Thick Plate Used For Rotating Seat Of Seating Twister With 50Nb “B” Class G.I. Pipe. The Footrests Are Made From Casted Aluminum Material, Having Sizes 130Mm X 310Mm X 5Mm Thick. With The Support Of 250Mm X 115Mm X 3Mm Thick Ms Plate. It Has Bolting Provision For Mounting On Concrete Slab. The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With Minimum 60 To 70 Micron Thickness. Bolt M8x16 Mm And Nylock Nut Of M8 Made Of Ss 304 Used On Nylon Cap Mounted On Pins To Protect Bearings And Pins From Rain And Dust. , Providing And Fixing Parallel Bars Including Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 1870Mm (Length) X 530Mm (Width) X 2000Mm. (Height). Safe Area: - 5.0Mtr X 2.5Mtr Parallelbar Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. The Main Frame Made From 50Nb “B” Class G.I. Pipe. The Handle Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is 25Mm X 25Mm X 3Mm Thickness Langle. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing And Fixing Push Up Bar Including Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 1870Mm (Length) X 530Mm (Width) X 2000Mm. (Height). Safe Area: - 5.0Mtr X 2.5Mtr Push Up Bar Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. The Main Frame Made From 50Nb “B” Class G.I. Pipe. The Handle Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is 25Mm X 25Mm X 3Mm Thickness Langle. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing And Fixing Double Standing Twister Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Dimensions: - 1150Mm (Length) X 1150Mm (Width) X 1580Mm. (Height). Safe Area: - Ø2.1Mtr. Triple Twister Made From “B” Class Galvanized Iron (G.I.) Pipe Ofdifferent Nb Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. The Center Pipe Is Of 100Nb Made From “B” Class G.I. Round Pipe. The Bottom Support Welded Is Of M.S. Round Plate Of Ø250 Mm & 10Mm Thick. The Standing Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Handle Frame Of Triple Twister Is Of 25 Mm Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80Mm Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angle Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipe Of 3Mm Thickness The Standing Plate Is Fitted On The Frame Made Up Of Ø 80 Nb Gi. Pipe. M.S. Round Plate Of Size Ø300mm X 10Mm Thickness. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Pins Used Are Made Up Of Ø 35 Mm Sae 8620 Bright Material. The Bearings Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness Includes As The Cost/Unit Ie. Rate Include Basic Item Cost 12.5% Excise And 5% Cst, Transportation & Fitting Charges Transit Insurance. , Providing And Fixing Surf Board Including Filting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Dimensions: - 910Mm (Length) X 860Mm (Width) X 1400Mm.(Height). Safe Area:-1.39 X 1.27Mtr. Surf Board Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Center Pipe Is Of 100Mm Nb Made From “B” Class G.I. Pipe.The Sleeve Pipe Is Of 125Mm Od Seamless Pipe With Thickness Of 5Mm And Bolted To Main Frame With M10 Ss Bolts. The Bottom Support Welded Of M.S. Plate Of Ø 250 Mm & 10Mm Thickness. The Handle Frame Is Of25nb Made From “B” Class G.I. Pipe. The Paddleframe Is Of50nb Made From “B” Class G.I. Pipe Is Supported With70 X 8Mm Bend M.S. Flat And Can Be Replaceable. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80Nb“B” Classwelded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick.Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X40mm Crc Square Pipes Of 3Mm Thickness. Bushes Are Used 70Mm Outer Diameter With 5Mm Thickness Is Used. The Footrests Made From Aluminum Casting Material Of Size 320Mmx270mmx5mm. For Support To Footrest 200Mmx250mm With 3Mm Thickness M.S. Plate Used. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Pins Used Are Made Up Of Ø35 Mm Sae 8620 Bright Material. The Bearing Used Are Of “6007Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. The Cerclips Used For Assembly Is Of A34. The Powder Coating Is Done With Pure Polyester Powder Of Ackzonoble Or Berger With 60 To 70 Micron Thickness. Includes As The Cost/Unit Ie. Rate Include Basic Item Cost 6% Excise And 5% Vat, Transportation & Fitting Charges Transit Insurance. , Providing And Fixing Body Strecher Including Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 1870Mm (Length) X 530Mm (Width) X 2000Mm. (Height). Safe Area: - 5.0Mtr X 2.5Mtr Body Strecher Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. The Main Frame Made From 50Nb “B” Class G.I. Pipe. The Handle Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is 25Mm X 25Mm X 3Mm Thickness Langle. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing And Fixing Body Strecher Including Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 1870Mm (Length) X 530Mm (Width) X 2000Mm. (Height). Safe Area: - 5.0Mtr X 2.5Mtr Body Strecher Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. The Main Frame Made From 50Nb “B” Class G.I. Pipe. The Handle Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is 25Mm X 25Mm X 3Mm Thickness Langle. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing And Fixing Chest Press & Seated Puller Including Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 2000Mm (Length) X 710Mm (Width) X 2200Mm. (Height). Safe Area: - 3.0Mtr X 1.7Mtr. Chest Press & Seated Puller Equipment Made Up Of “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Center Pipe Is Of 100Nb Made Up Of “B” Class G.I. Pipe. The Bottom Welded With Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thickness. The Connecting Pipes Are Made Up From 25Nb “B” Class G.I. Pipe. The Handle Frame Is Made Up From 32Nb “B” Class G.I. Pipe. To Build Structure Bushes Are Used Which Are Made From Ms Seamless Pipe Of 60Mm O.D. And 5Mm Thickness As Well As 60Mm Diameter Solid Bar Bush Is Used. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S.Angles Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness. The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330 Mm X 300 Mmx2mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. Foundation Cover Closing Cap Is Made Fromfrpmaterial With 0.7Thickness. Pins Used Of Diameter 25Mm And 17Mm Are Made Up From Sae 8620 Bright Material. Bolt M8x16 Mm And Nylock Nut Of M8 Made Of Ss 304 Used On Nylon Cap Mounted On Pins To Protect Bearings And Pins From Rain And Dust. The Bearings Used Are Of “6205Zz” & “6203Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Cerclips Used For Locking Is Made Up Of A24 Mm & A16mm. The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing And Fixing Surfing Board Including Filting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Dimensions: - 910Mm (Length) X 860Mm (Width) X 1400Mm.(Height). Safe Area:-1.39 X 1.27Mtr. Surfing Board Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Center Pipe Is Of 100Mm Nb Made From “B” Class G.I. Pipe.The Sleeve Pipe Is Of 125Mm Od Seamless Pipe With Thickness Of 5Mm And Bolted To Main Frame With M10 Ss Bolts. The Bottom Support Welded Of M.S. Plate Of Ø 250 Mm & 10Mm Thickness. The Handle Frame Is Of25nb Made From “B” Class G.I. Pipe. The Paddleframe Is Of50nb Made From “B” Class G.I. Pipe Is Supported With70 X 8Mm Bend M.S. Flat And Can Be Replaceable. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80Nb“B” Classwelded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick.Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X40mm Crc Square Pipes Of 3Mm Thickness. Bushes Are Used 70Mm Outer Diameter With 5Mm Thickness Is Used. The Footrests Made From Aluminum Casting Material Of Size 320Mmx270mmx5mm. For Support To Footrest 200Mmx250mm With 3Mm Thickness M.S. Plate Used. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Pins Used Are Made Up Of Ø35 Mm Sae 8620 Bright Material. The Bearing Used Are Of “6007Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. The Cerclips Used For Assembly Is Of A34. The Powder Coating Is Done With Pure Polyester Powder Of Ackzonoble Or Berger With 60 To 70 Micron Thickness. Includes As The Cost/Unit Ie. Rate Include Basic Item Cost 6% Excise And 5% Vat, Transportation & Fitting Charges Transit Insurance. , Providing And Fixing 6 In 1 (Seated Pullar , Leg Press, Surf Board, Seating Twister, Air Walker,Cross Trainer) Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Combination Made From “B” Class G.I. Pipe. The Center Ms Pipe Is Of 100Mmx100mmsize. Round Plate Of 250 Mm Diameter & 10Mm Thickness Is Welded At Bottom. The Links Are Made Up Of 25Mm Nb “B” Class G.I. Pipe. The Handle And Seat Frame Of Seated Puller Is Made From 32Mm Nb “B” Class G.I. Pipe. For The Assembly Different Bushes Are Used Which Is Made From Seamless Pipe Of 50Mm Od And 5Mm Thickness & 50Mm Solid Bar Is Used. Leg Press Center Frame Is Of 32Mm Nb Made From “B” Class Gi Pipe. The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330Mm X 300 Mmx2mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. The Leg Press Footrest Consists Of 25 Nb Made From “B” Class Gi Pipe. The Pins Used In Are Made Up Of 25 Mm Diameter Hardened Low Carbon Steel Material. The Nut Bolts Used For Assembly Are Made From S.S. Material. The Bushes (Stopper) Used To Avoid The Collusion Made From Poly Urethin Plastic Material Of 50 Mm Diameter. Surfing Frame Is Of 32Nb Made From “B” Class G.I. Pipe. Surf Board Handle Frame Is Of 25Nb Made From “B” Class G.I. Pipe. 300Mm Diameter X 10Mm Thick Plate Can Be Used For Rotating Seat Of Seating Twister With 50Nb Vertical G.I. Pipe. Closing Caps Made From High Quality Frp Material Which Is Of 2 Mm Thickness. The Pins Used Are Made Up Of 17Mm Diameter Solid Bar. The Bearing Used Are Of “6203, 6205” Permanent Lubricated Sealed Bearing Of Reputed Make. The Nut Bolts Used For Assembly Are Made From M.S. Pre-Galvanized Material. A17, A24, A34 Circlips Are Used For Assembly. The Footrests Are Made From Casted Aluminum Material, Having Sizes 130Mm X 310Mm X 5Mm Thick. With The Support Of 310Mm X 130Mm X 3Mm Thick Ms Plate.It Has Bolting Provision For Mounting On Concrete Slab. Polycarbonate Sheet Is Used For Roof With Supporting Frame Which Made From 25X25mm, 40X20mm Ms Pipes And 25Mm Nb “B” Class G.I. Pipe. Ms 8Mm Thick Round Plate Can Be Used For Splitting Roof Structure From Main Frame. The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With Minimum 60 To 70 Micron Thickness. , Providing And Fixing Of Stainless Steel Twin Bin/Litterbin/Dual Pole Dustbin.Dustbin Shall Be Made Up Of 304 Grade Steel And With The Best In Mirror Polished Ss Pipes Rectangular Pipes Shall Be Of 25Mmx50mm Dustbin Size The Dustbin Shall Be Madewearing Cap And Shirt With Tie In Different Colour And Holding The Dustbin From Hand And Legs The Dusbin Shall Be Made In Round Bucket Shape Of Height 2.5 And Width 1.5 And The Weight Carrying Capacity Of 80 To 100 Liters The Dustbin Shall Be And With The Lid At The Top For Insurting Of The Garbage. The Hole Shall Be Done In The Bottom For Extracting Of The Garbage The Bottom Cover Shall Be Made Up Proper Hooks And Opeaner And Coloser Accessiories. ‘Logo Shall Be On The Front Side Of The Dustbin. All Dustbin Fabricated From High Quality Grade Fiber Glass Mat Of 450 Gsm With 2 Layers Or With 300 Gms Mat With 3 Layers With Heavy Quality Resin And Cobalt And All The Chemicals With Proper Thickness And Shall Be Made In Esthetical Look With Proper Finishing Workall The Different Color Use For Finishing Work. All Work Should Be Complete As Per Direction & Fully Satisraction Of Engineer Incharge. , Providing And Fixing Of [Octagonal Shape 8 In 1 (Seated Puller, Air Walker,Cross Trainer,Rower,Thi Chi 2 Wheel,Surf Board,Sit Up Board,Puish ,Bar)] Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Seated Puller, Air Walker,Cross Trainer,Rower,Thi Chi 2 Wheel,Surf Board,Sit Up Board,Puish ,Bar Combination Made From “B” Class G.I. Pipe. The Center Ms Pipe Is Of 100Mmx100mmsize. Round Plate Of 250 Mm Diameter & 10Mm Thickness Is Welded At Bottom. The Links Are Made Up Of 25Mm Nb “B” Class G.I. Pipe. The Handle And Seat Frame Of Seated Puller Is Made From 32Mm Nb “B” Class G.I. Pipe. For The Assembly Different Bushes Are Used Which Is Made From Seamless Pipe Of 50Mm Od And 5Mm Thickness & 50Mm Solid Bar Is Used. Leg Press Center Frame Is Of 32Mm Nb Made From “B” Class Gi Pipe. The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330Mm X 300 Mmx2mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. The Leg Press Footrest Consists Of 25 Nb Made From “B” Class Gi Pipe. The Pins Used In Are Made Up Of 25 Mm Diameter Hardened Low Carbon Steel Material. The Nut Bolts Used For Assembly Are Made From S.S. Material. The Bushes (Stopper) Used To Avoid The Collusion Made From Poly Urethin Plastic Material Of 50 Mm Diameter. Surfing Frame Is Of 32Nb Made From “B” Class G.I. Pipe. Surf Board Handle Frame Is Of 25Nb Made From “B” Class G.I. Pipe. 300Mm Diameter X 10Mm Thick Plate Can Be Used For Rotating Seat Of Seating Twister With 50Nb Vertical G.I. Pipe. Closing Caps Made From High Quality Frp Material Which Is Of 2 Mm Thickness. The Pins Used Are Made Up Of 17Mm Diameter Solid Bar. The Bearing Used Are Of “6203, 6205” Permanent Lubricated Sealed Bearing Of Reputed Make. The Nut Bolts Used For Assembly Are Made From M.S. Pre-Galvanized Material. A17, A24, A34 Circlips Are Used For Assembly. The Footrests Are Made From Casted Aluminum Material, Having Sizes 130Mm X 310Mm X 5Mm Thick. With The Support Of 310Mm X 130Mm X 3Mm Thick Ms Plate.It Has Bolting Provision For Mounting On Concrete Slab. Polycarbonate Sheet Is Used For Roof With Supporting Frame Which Made From 25X25mm, 40X20mm Ms Pipes And 25Mm Nb “B” Class G.I. Pipe. Ms 8Mm Thick Round Plate Can Be Used For Splitting Roof Structure From Main Frame. The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With Minimum 60 To 70 Micron Thickness. , Providing And Fixing Sit Up Board Double Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 1320Mm (Length) X 600Mm (Width) X 1750Mm. (Height). Safe Area:- 1.77 X 1.2Mtr. Sit Up Board Double Equipment Made From “B” Class G.I. Pipe Of Different Nb. The Main Frame Pipes Are Of 80Nb “B” Class G.I. Pipe With Single Bend Pipe With 250Mm Radius. The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thick. The Handle Frame Is Made Up Of 25Nb “B” Class G.I.Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mmcrc Square Pipes Of 3Mm Thickness. To Build Structure Bushes Are Used Which Are Made From M.S.Seamless Pipe Of 60Mm Od. With 5 Mm Thickness. High Tensile Steel With Galvanized Nuts And Bolts Are Used For Assembly. The Powder Coating Is Done With Pure Polyester Powders Of Ackzonoble Or Berger Paints With 60 To 70Micron Thickness. A16 , A 24 Mm Circlips Are Used For Assembly. Bolt M8x16 Mm And Ny Lock Nut Of M8 Made Of Ss 304 Used On Nylon Cap Mounted On Pins To Protect Bearings And Pins From Rain And Dust. , Providing And Fixing Pommel Horse Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Pommel Horse Equipment Made From “B” Class G.I. Pipe Of Different Nb. The Main Frame Pipes Are Of 80Nb “B” Class G.I. Pipe With Single Bend Pipe With 250Mm Radius. The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thick. The Handle Frame Is Made Up Of 25Nb “B” Class G.I.Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mmcrc Square Pipes Of 3Mm Thickness.To Build Structure Bushes Are Used Which Are Made From M.S.Seamless Pipe Of 60Mm Od. With 5 Mm Thickness. High Tensile Steel With Galvanized Nuts And Bolts Are Used For Assembly. The Powder Coating Is Done With Pure Polyester Powders Of Ackzonoble Or Berger Paints With 60 To 70Micron Thickness. A16 , A 24 Mm Circlips Are Used For Assembly. Bolt M8x16 Mm And Ny Lock Nut Of M8 Made Of Ss 304 Used On Nylon Cap Mounted On Pins To Protect Bearings And Pins From Rain And Dust. , Providing And Fixing Thi Chi 4 Wheel Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowe Dimensions: - 900Mm (Length) X 900Mm (Width) X 1580Mm (Height). Safe Area:- 1.9Mtr X 1.9Mtr Thi Chi 4 Wheel Equipment Made From“B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Center Pipe Is Of 100Mmnb Made From“B” Class G.I. Pipe, And The Bottom Support Of M.S. Round Plate Of 250 Mm Diameter & 10Mm Thickness. Sleeve Provided Of M.S. Seamless Pipe Of Outer Diameter 125Mm With Thickness 5Mm Provided. The Handle Movement Frame Is Of 25Mm Nb Made From“B”Class G.I. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80Mm Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angle Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipe Of 3Mm .Thickness. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Pins Used Are Made Up Of Ø 25 Mm Of Sae8620 Bright Material. The Bearing Used Is “6201Zz” & “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. The Cerclips Used For Assembly Is Of A 24. The Nylon Bush Is Used For Handle Knob. The Powder Coating Done With Pure Polyester Powder Of Ackzonoble Or Berger Paints With 60 To70 Micron Thick. , Providing And Fixing Horse Rider Stationincluding Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 1870Mm (Length) X 530Mm (Width) X 2000Mm. (Height). Safe Area: - 5.0Mtr X 2.5Mtr Horse Rider Station Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. The Main Frame Made From 50Nb “B” Class G.I. Pipe. The Handle Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is 25Mm X 25Mm X 3Mm Thickness Langle. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing And Fixing Back Extensionincluding Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 1870Mm (Length) X 530Mm (Width) X 2000Mm. (Height). Safe Area: - 5.0Mtr X 2.5Mtr Back Extension Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. The Main Frame Made From 50Nb “B” Class G.I. Pipe. The Handle Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is 25Mm X 25Mm X 3Mm Thickness Langle. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing And Fixing Cross Walker Including Filting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Blowedimensions: - 1720Mm (Length) X 630Mm (Width) X 1750Mm.(Height) Safe Area: - 2.7Mtr X 1.6Mtr.Cross Walker Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters The Main Frame Pipe Is Of 80Mm Nb Made From “B” Class G.I. Material Which Is Bend At The Radius Of 250Mm. The Leg Movement Frame Is Of 50 X 50Mm X 3Mm Thick Crc Square Pipe. Sleeves Are Made Up Of 100 Mm Od M.S. Pipe With Thickness 5Mm. This Results In Easy Replacement Of Bearings, Pins And Handle. The Handle Frame Is Of 25Mm Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class.Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick.Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness. Two Foundations Are Provided For Rigid Support. The Footrests Made From Aluminum Casting Material Of Size 130 X 310 X 5Mm. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Pins Used Are Made Up Of Ø 25Mm Sae8620 Bright Material. Pins Are Fixed At The Outer End With M8 Grub Screws And Dia.8Mm Ss Ball. The Bearings Used Are “6205Zz” Are Permanent Lubricated Sealed Bearing Of Reputed Brand. High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Cerclips Used For Assembly Are Of A24 Type. The Powder Coating Is Done With Pure Polyester Powderof Ackzonoble Or Berger With 60 To 70 Micron Thickness. , Supply And Fixing Of Stainless Steel Twinbin/Hanging Double Litterbin. The Dustbin Shall Be Made In Heavy Stainless Steel 304 Grade Steel And With The Best In Mirror Polished Shinning Pipes Side Rectangle Pipe Size : 50Mmx50mm Dustbin Size Shall Be Of 2.5 Feet X 5 Feet Aprox. Capacity Of Each Dustbin Shall Be 100 Liters Each And 2 Nos Of Dustbin Shall Be Attach In One Twin Bin.The Hut Shape Of Canopy Shall Be Made On The Top Of The Dustbin In Stainless Steel Material Heavy Sheet To Cover The Whole Dustbin And Name Shall Be Written Nagar Palika Nathdawa On It. , Providing And Fixing Loop Climber Including Fitting And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Loop Climber Equipment Made From “B” Class G.I. Pipe Of Different Nb. The Main Frame Pipes Are Of 60 Nb “B” Class G.I. Pipe With 09 Nos Of Loops Made In 20 Nb Heavy Class Pipe. The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thick. The Handle Frame Is Made Up Of 25Nb “B” Class G.I.Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mmcrc Square Pipes Of 3Mm Thickness.To Build Structure Bushes Are Used Which Are Made From M.S.Seamless Pipe Of 60Mm Od. With 5 Mm Thickness. High Tensile Steel With Galvanized Nuts And Bolts Are Used For Assembly. The Powder Coating Is Done With Pure Polyester Powders Of Ackzonoble Or Berger Paints With 60 To 70Micron Thickness. A16 , A 24 Mm Circlips Are Used For Assembly. Bolt M8x16 Mm And Ny Lock Nut Of M8 Made Of Ss 304 Used On Nylon Cap Mounted On Pins To Protect Bearings And Pins From Rain And Dust. , Providing And Fixing Leg Strecher Including Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 1870Mm (Length) X 530Mm (Width) X 2000Mm. (Height). Safe Area: - 5.0Mtr X 2.5Mtr Leg Strecher Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. The Main Frame Made From 50Nb “B” Class G.I. Pipe. The Handle Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is 25Mm X 25Mm X 3Mm Thickness Langle. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness , Providing And Fixing Cycle Walker Including Filling And Fixtures, Civil Works And Required Sand Pit Filled With Approved Sand Work To Be Done As Per The Instruction Of Engineer Incharge And Specification Given Below Dimensions: - 1870Mm (Length) X 530Mm (Width) X 2000Mm. (Height). Safe Area: - 5.0Mtr X 2.5Mtr Cycle Walker Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. The Main Frame Made From 50Nb “B” Class G.I. Pipe. The Handle Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is 25Mm X 25Mm X 3Mm Thickness Langle. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness
