tender for 06 Nos. Class Rooms And 02 Nos. Pharmacy Lab, Faculty Room At Third Floor And 08 No. Pharmacy Lab, Faculty Room At Forth Floor In Library Builing At Kmc Language University, Lucknow, Brick work with common burnt clay F.P.S. (non modular) bricks of dass designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1) coment: 4 coarse sand 12 mm cement plaster of mix: 1:5 (1 cement: 6 coarse sand) Providing and applying white cement based putty of average Thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete Finishing with Deluxe Muili surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two for more coats applied on walls @ 1.25 tr/10 sqm over and including one coat of Special primer applied @ 0.75 lir/10 sqm Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajas, Intels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sourcest Steel reinforcement for R.C.C. work including straightening. cuting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars Centering and shuttering including strutting, propping elc and removal of form for Suspended floors, roofs, landings, balconies and access platform Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, induding painting of fittings and brackets, cutting and making good the wall wherever required Size 1600x450x200 mm Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge, 100 mm nominal dia Pices Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fiftings, including fixing the pipe with damps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore Providing & Fixing of Jali Providing & Fixing of CP Waste Pipe, Providing and fixing double glazed hermelically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete Constructing brick masonry manhole in cement mortar 14 (1 cement: 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1) cement 15 coarse sand (zone-III): 3 graded slone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement 4 coarse sand (zone-ll) 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:24 (1 cement 2 coarse sand: 4 graded stone aggregate 20 men nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep induding C.I. cover with frame (light duty) 455x610 mm intemal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common bunt clay F.PS. (non modular) bricks of class designation 7.5
