Tender For Maintenance Of Sgr Building, Roof Treatment, Water Supply And Other Related Civil Work At 33/11 Kv Substations Hamirpur-Ii And Pauthiya District Hamirpur, 1 Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01) 2 Earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 kmoutside UPPCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (CSI No. 4.10) 3 Concrete with 4cm gaugestone ballast, coarse sand (F.M. 1.8 to 2.5) & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No. 5.02) 4 Cement concrete with 2cm gauge approved hard stone ballast,coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 3:1.5:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work(CSI No. 5.21) 5 Precast cement concrete door sills, chaukhats boundary posts,shelves and similar small work with cement, approved coarse sand(F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast in the proportion 1:1.5:3, excluding reinforcement but including fixig the same in position including cost of all other material, labor and T&P . (CSI No. 5.22) 6 RCC work with cement, approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. . (CSI No. 5.23) 7 RCC work with cement, approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P (CSI No. 5.24) 8 RCC work with cement, approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite quartzite etc from Dalla, Jhansi or other quarries in proportion1:1.5:3 in raft foundation and footings , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (CSI No. 5.27) 9 RCC work with cement, approved coarse sand (F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in RCC T beam-slab and column, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.29) 10 First class brick work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01) 11 First class brick work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in super structure but for walls of one brick thickness.Add for extra labour to the rates. (CSI No. 6.08)[CSI NO 6.01+6.07+6.08] 12 Brick work in foundation & plinth with old dismantledbricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.18) 13 2 cm. thick damp proof course with 1:2 cement and approved coarsesand (F.M.1.8 to 2.5) mortar with liquid water proofing material as ordered by the Engineer-In-charge in the proportion as specified by the manufacturer, including supply of all materials, labour and T&P etc. (CSI No. 7.01) 14 Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.57) 15 Supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P. (CSI No. 8.63) 16 Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01) 17 TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)(CSI No. 9.03) 18 Providing and Fixing barbed iron wire fencing including stretching, fixing into the post including all labour, materials and T&P required for proper completion of work. the weight of hot dipped GI barbed wire having 12 SWG - 2 ply wires and 4 point ordinary barbs @ 150 mm (approx) C/C should be 100 gm per Meter. (CSI No. 9.07) 19 Supply and fixing galvanised mosquito proof jali (16x24 gauge) withM.S. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame. (CSI No. 9.18) 20 S/F welded wire mesh size 75x25mm and rectangularmade out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labourand T&P etc. required for proper completion of work . except cost of M.S angle and flat. (CSI No. 9.22) 21 S/F 50x50mm, 8 gauge G.I. chain link fencing 1.8 Mhigh including fixing to vertical posts, horizontal runners with 10mm dia.40mm long bolts, nuts and washers complete with all material, labour and T&P etc. required for proper completion of work. Chain link of 8 gauge shall be galvanized by hot dipped method as per relevant IS Code. (Excluding cost of vertical posts and horizontal runners) (CSI No. 9.23) 22 Grouting of vertical or inclined post of pale/chain/security fencing in truelevel, alignment and in plumb or inclination as required,including cost of all labour, materials and T&P required forproper completion of work. ( Post and concrete for grouting shall be measured separately) (CSI No. 9.28) 23 P/F Concertina coilfencing with required dia. 600 mm upto 3 M height of wall between existing angle iron ‘Y’ shaped placed 2.4 M or 3.0 M apart and with 6 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete ( No. of rounds will be 7 to 8 in one Meter length) as per direction of Engineer I/C with reinforced barbed tape (R.B.T.)/ Spring core (2.5mm thick ) wire of high tensile strength of 165 kg/Sqmm with tape ( 0.52 mm thick ) of supreme make or equivalent and weight 43.478 gm/meter ( cost of MS angle, C.C. blocks shall be paid separately).(CSI No. 9.37) 24 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(CSI No. 11.07) 25 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.09) 26 Add for extra labour to all items of plaster if done in ceiling. (CSI No. 11.10 27 Add for extra labour and materials for plaster over rough face ofone brick thick wall. (CSI No. 11.12) 28 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of onepart of cement and two parts of approved coarse sand laid inpanels finished with 3mm.floating coat of neat cement or cementand marble dust in ratio of 5:1 including supply of all materials, labour & T&P etc. required for proper completion of the work. (CSI No.11.13) 29 S/mixing approved water proofing compound (CICO,DR FIXIT etc) in cementmortar in plaster or concrete work in the proportion as recommended by the manufacturer. (CSI No. 11.15) 30 Making drip coarse (25x12) mm in 1:2 cement and coarse sandincluding supply of all materials, labour and T&P etc requiredfor proper completion of work. (CSI No. 11.19) 31 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumption 0.044 bag/Sq.m.) (CSI No. 11.20) 32 2.5 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specifiedand including 7.5 cm thick base concrete consisting of cement, coarse sand and 4cm gauge I class brick ballast in the proportion of 1:6:12 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work.(CSI No. 12.01) 33 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.04) 34 First class bricks on edge floor laid dry, joints sand filled,including preparation of base to proper slope and its rammingincluding supply of all material labour & T&P etc. required forproper completion of the work. (CSI No. 12.07) 35 Supply and Laying 8 mm thickglazed floor tiles of Somany, Johnson or equivalent make, , laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 12.11) 36 Providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& T&P etc. required for proper completion of work. (CSI No. 12.14) 37 providing and fixing 8 mm thick vitrifiedtiles in flooring or skirting with adhesive of approved quality on existing smooth floor including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.19) 38 Painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint Luxol or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01) 39 As in item 13.01 above but for every coat after first coat. (CSI No. 13.02) 40 As in item 13.01 above but for every coat on previously paintedold wood or iron work including its sand papering,rubbing andcleaning as required, for proper completion of work. (CSI No. 13.03) 41 One priming coat and one coat oil bound distemper on new work includingsupply of all materials,labour and T&P etc. required for propercompletion of the work. (CSI No. 13.08) 42 As in item 13.08 but for every coat after the first coat. (CSI No. 13.09) 43 As in item 13.08 but for every coat on previously old oil bound distemper surface.(CSI No. 13.10) 44 Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20) 45 Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.(CSI No.13.21) 46 Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.25) 47 Same as above in item no. 13.25 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint. (CSI No. 13.26) 48 Same as above in item no. 13.25 but one coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint on previously painted surface. (CSI No. 13.27) 49 Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres. (CSI No. 15.01) 50 Dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the Engineer In-charge within a distanceof 60 metres. (CSI No. 15.05) 51 Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11) 52 Scrapping old white or colour wash or distemper including disposal of refuseas directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.12) 53 Dismantling of existing damaged Mud Faska over the roof. Cleaning the surface with wire brush, removal and disposal of rubbish at adistace 100 Meters also including the cost of cleaning and stacking of usable materials etc., including all labour, material required for proper completion of work. (CSI No. 15.14) 54 Renewing panes of 4 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.. (CSI No. 20.04) i 55 Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.L drops 16 mm dia x 300 long. (CSI No. 20.17)a 56 Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.Tower bolts 10 mm dia x 250 mm long.(CSI No. 20.17b) 57 Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.Iron hinges 100 mm size.12 gauge.thick(CSI No. 20.17d) 58 Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.M.S.handles 100 mm size (CSI No. 20.17f) 59 Cleaning and opening of chocked W.C./ bath / kithchen pipe line including opening and refixing of chamber cover including washing etc. complete.(Analysis based on NBO - 11 25.020.(CSI No. 20.19) 60 S/laying chicken mesh of (20 mm.)hexagonal heavy quality over roofs of joints of roof as per direction of the Engineer - in - charge.(CSI No. 20.21) 61 Attending to petty maintenance service like plumbingservice,welder service, mansion service and carpenter servicerequired as Job attending by one no. Plumber/welder/mason/carpenter with oneno. helper per hour or part of an hour. CSI 22.18 62 Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01)a 63 Providing and fixing 20 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01)b 64 Providing and fixing15 mm dia Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.02)a 65 Providing and fixing 20 mm dia Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.02)b 66 Providing and fixing PVC CONNECTION PIPE, 300X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.09)(a) 67 Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work. (CSI No. 26.12) 68 P/FBRASS BIB COCK, 15 mm dia (400 gsm) ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.13) 69 P/F BRASS STOP COCK, 15 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.14)a 70 Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.17) 71 P/F 15 mm dia ISI approved CPVC pipes complete with special such as bend tee. socket, crosee, clamp etc earth work including filling the trenches etc required for proper completion of the work, the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials labour and T&P complete(CSI No. 26.19) 72 P/F 20 mm dia ISI approved CPVC pipes complete with special such as bend tee. socket, crosee, clamp etc earth work including filling the trenches etc required for proper completion of the work, the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials labour and T&P complete(CSI No. 26.20) 73 P/F 25 mm dia ISI approved CPVC pipes complete with special such as bend tee. socket, crosee, clamp etc earth work including filling the trenches etc required for proper completion of the work, the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials labour and T&P complete(CSI No. 26.21) 74 Providing and fixing first quality white glazed Orissa pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out P trapincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.01) 75 Providing and fixing 450X300 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 27.10) 76 Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12) 77 Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.13) 78 Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.19) 79 Providing and fixing 100 mm dia PVC P or S trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.24) 80 Providing and fixing CI GRATING 100 mm dia includingall materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.25) 81 Wiring point for light with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour was.(PWD ELE. SCH.2018,131C+187A) 82 Wiring point for plug with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour wash. (PWD ELE. SCH.2018,134C+187C) 83 Wiring point for exhaust fan with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour was.(PWD ELE. SCH.2018,137C+187D) 84 Supply and fixing and concealing of 20 mm dia 2 mm thick PVC conduit pipe with ISI marked embossed and with PVC accessories confirming to IS 3419 for drawing wires duly sealed at joints original resin/adhesive to make the complete piping rigid, plastering with cement sand mortor finished to the level with matching colour wash including costof all materials, labour and T&P etc.required for propercompletion of the work.(PWD ELE. SCH.2018,148A) 85 S/F of 6/10/16/20/25/32 Amp. SP MCB (10 KA ) C Curveof approved make and as per sample approved by E/I (PWD ELE. SCH.2018,1002 CAT-B) 86 S/F surface/flush mounting 4 ways SPN distribution board without MCB with additional metal door complete in all respect as per direction of E/I. (PWD ELE. SCH.2018,1022 CAT-B) 87 Supply and fixing of power plug with 20 amp/250 volt flush type modular switch and 5pin 20A/250V flush type universal modular socket switch on concealed M.S.Boxincluding suplly of all materials ,labour T&P etc. required for proper completion of work (PWD Elec.Sch.2018 Item No.1139 A) 88 Providing and fixing 12 mm thick Industrial tiles size 400 x 400 mm or more of Kajaria or approved make and colour usingin different sizes (thickness to be specified by the manufacturer) conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete (NSI) 89 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.(NSI)
