|
| 1 | Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made up of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+30)mm thick having density (32 & 32)kg/m³ in seat and (40+30)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. The chair shall be supplied with Chrome plated arm with cushion, base leatherite covering top. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged chrome plated having pitch circle dia. 600 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 480±10 mm(D) X 520±10 mm(W) and back size shall be 540±10 mm(W) X 760±10 mm(H) from seat. Overall height shall be = 1190±10 mm, overall depth/width = 700±10 mm. |
| 2 | Providing and supplying high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 45kg/m³ in seat and 45mm thick having density 35Kg/m³ in back. The same shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The back and base of chair shall be supplied with polypropylene/ABS moulded cover and the backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used black integral polyurethane arm with metal insert completely joint with seat and back. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle dia. 700±15 mm and fitted with 5 nos. twin wheel castors. The castors of the chairs should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA Standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 485±10 mm(W) X 450±10 mm(D) and back size shall be 490±10 mm(W) X 610±10 mm(H) from seat. Seat height 460±10 mm, overall height shall be 1060±10 mm, overall depth = 620±10 mm and overall width (Arm) = 600±10 mm, Overall base dia. 760±10 mm. |
| 3 | Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back. The same shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide back support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used black integral polypropylene arm completely joint with seat. For seating durability the chair shall have synchro tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 120mm to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle dia. 700mm and fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycle with 250lbs load. The seat size shall be 465±10 mm(W) X 460±10 mm(D) and back size shall be 480±10 mm(W) X 520±10 mm(H) from seat & overall height = 960±10 mm. |
| 4 | Supplying & Placing Modular table in completely knock down conditions with an overall size 2400mm X 1800mm X 750mm that is to be assembled at site. The work top shall have the size 2400mm X 900mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top shall be 50mm thick on edges, after 100mm from edges it should be 25mm thick. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 50mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-laminated particle board in linear shape with appropriate PVC edge banding connected with both end. The table shall have side unit for storage purpose with an overall size 900mm X 450mm X 750mm. Side Storage top shall be made up from 25mm thik pre-lam particle board. The side unit shall be made up of Pre-laminated particle board of grade II of IS 12823 with 18mm thick like shutter, back, facia, top etc. It shall have 2 shutters. The shutter shall be operated with SS handle and easily close & open with the assistance of roller channel to enable smooth operation. The shutter shall have central locking mechanism in which all the drawer shall be locked with one single lock. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. Laminate pedestal shall be provided with an overall size 400mm X 450mm X 680mm. Laminate pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. |
| 5 | Supplying & Placing Modular table in completely knock down conditions with an overall size 2100mm X 1800mm X 750mm that is to be assembled at site. The work top shall have the size 2100mm X 900mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top shall be 50mm thick on edges, after 100mm from edges it should be 25mm thick. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 50mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-laminated particle board in linear shape with appropriate PVC edge banding connected with both end. The table shall have side unit for storage purpose with an overall size 900mm X 450mm X 750mm. Side Storage top shall be made up from 25mm thik pre-lam particle board. The side unit shall be made up of Pre-laminated particle board of grade II of IS 12823 with 18mm thick like shutter, back, facia, top etc. It shall have 2 shutters. The shutter shall be operated with SS handle and easily close & open with the assistance of roller channel to enable smooth operation. The shutter shall have central locking mechanism in which all the drawer shall be locked with one single lock. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. Laminate pedestal shall be provided with an overall size 400mm X 450mm X 680mm. Laminate pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. |
| 6 | Supplying & placing storage unit with an overall size 1500mm X 450mm X 750mm. It storage should be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. All profile i.e. side, back, top, shutter, facia, shelf, skirting shall be 18mm thick and base 9mm thick. The top and side shall be full round post form at front and other edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have 8 nos. of drawer, 1 nos. of adjustable shelf and 2 nos. of shutter. The drawer shall be operated with roller channel to enable smooth operation and concealed crank hinge with SS handle. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key and shutter shall have MP lock. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. There shall be buffers provided at the bottom to avoid scratches on the floor. |
| 7 | Supplying & placing center table with an overall size 1200mm X 600mm X 450mm. The top of the table shall be made up of 12mm thick toughened glass with bevelled edges. The profile shall be in rectangle shape with round corner. The top shall be supported on MS chrome plated tubular frame with cross-section area 40mm X 20mm with 1.6mm thick. The under structure shall consist of four legs made of MS chrome plated oval pipe having cross-section area 52mm X 26mm with 1.6mm thick. There shall be co-polymer polypropylene shoe provided at the bottom to avoid scratches on the floor. |
| 8 | Supplying & placing storage unit with an overall sizeW 900 X D 450 X H 2020 . It storage should be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. All profile i.e. side, back, top, shutter, facia, shelf, skirting shall be 18mm thick and base 9mm thick. The top and side shall be full round post form at front and other edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have 8 nos. of drawer, 1 nos. of adjustable shelf and 2 nos. of shutter. The drawer shall be operated with roller channel to enable smooth operation and concealed crank hinge with SS handle. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key and shutter shall have MP lock. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. There shall be buffers provided at the bottom to avoid scratches on the floor. |
| 9 | Supplying & placing storage unit with an overall sizeW 2275 X D 450 X H 775. It storage should be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. All profile i.e. side, back, top, shutter, facia, shelf, skirting shall be 18mm thick and base 9mm thick. The top and side shall be full round post form at front and other edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have 8 nos. of drawer, 1 nos. of adjustable shelf and 2 nos. of shutter. The drawer shall be operated with roller channel to enable smooth operation and concealed crank hinge with SS handle. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key and shutter shall have MP lock. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. There shall be buffers provided at the bottom to avoid scratches on the floor. |
| 10 | Supplying & placing storage unit with an overall sizeW 2275 X D 450 X H 775. It storage should be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. All profile i.e. side, back, top, shutter, facia, shelf, skirting shall be 18mm thick and base 9mm thick. The top and side shall be full round post form at front and other edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have 8 nos. of drawer, 1 nos. of adjustable shelf and 2 nos. of shutter. The drawer shall be operated with roller channel to enable smooth operation and concealed crank hinge with SS handle. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key and shutter shall have MP lock. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. There shall be buffers provided at the bottom to avoid scratches on the floor. |
