Tender For Increasing Capacity Of Transformer And Other Work In Business Plan Under Edd-I, Bulandshahr., 1 Carriage Of Fallowings From Esc Bsr To Pit Site On Kachcha Pacaa Road Including Loading And Unloading Chagres At Both Ends, Required Ccompletion O, bulandshahr-Uttar Pradesh

Tender For Increasing Capacity Of Transformer And Other Work In Business Plan Under Edd-I, Bulandshahr., 1 Carriage of fallowings from ESC BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx. 2 Carriage new 10 KVA Transformar. 3 Carriage new 25 KVA Transformer 4 Carriage new 63 KVA Transformer 5 Carriage new 100 KVA Transformer 6 Carriage new 250 KVA Transformer 7 Carriage PCC Pole for Distribution Transformer 8 Carriage LT lead 240/400/630 sqmm 9 Carriage LT ABC 3x50/95/120 sq.mm. 10 Carriage 11 KV HT fuse set 11 Carriage ACSR Dog conductor 12 Carriage ACSR Weasal conductor 13 33 KV line spare cable 3X300 sqmm 14 LT PVC XLPE Cable 1X240 /400 /630 sqmm 15 33 KV V- Type x arm 16 Stay Set Complete with wire 17 11 KV V-Type Cross Arm 18 Earthing Rod Complete 19 The following meterial Erection & Fixing as per RESPO manual. It including the cost of labour, T&P, Carrier etc. required for proper completion of work. 20 Installation new 10 KVA Transformar. 21 Installation new 25 KVA Transformer 22 Installation new 63 KVA Transformer 23 Installation new 100 KVA Transformer 24 Installation new 250 KVA Transformer 25 Installation PCC Pole for Distribution Transformer 26 Installation LT lead 240/400/630 sqmm 27 Installation 11 KV HT fuse set 28 Carriage LT ABC 3x50/95/120 sq.mm. 29 Laying ACSR Dog conductor 30 Laying ACSR Weasal conductor 31 Laying 33 KV line spare cable 3X300 sqmm 32 Laying of LT PVC XLPE Cable 1X240 /400 /630 sqmm 33 Fixing of Aluminum Bus Bar & Crimping Lug 34 Fixing of LT ACB630 Amp. 35 33 KV V- Type x arm 36 Stay Set Complete with wire 37 11 KV V-Type Cross Arm 38 Earthing Rod Complete 39 Providing and fixing of the following material by the Contractor as per UPPCL/RESPO Rules. 40 Guarding M.S. Angle 65x65x6mm)/1.6 meter 41 Distribution Box 3 phase 42 MS Channel (Dropper) 100x50x2028 43 MS Angle 75x75x6x2028 mm 44 M.S. Top Channel (125x65x2240 mm) 45 MS T-off Channel 125x65x1300 mm 46 F-Clamp 47 11 KV Cross Arm Holding Clamp 48 33 KV Cross arm Holding clamp 49 Nut & Bolt with Washers all sizes. 50 Danger Board with Clamp 51 Grouting of Pole 52 Stone Pad 53 Clamps for D.B. (40x6 mm) 54 Clamps for 10 KVA T/F (75x8 mm) 55 Clamp for D/P with Nut & Bolt 56 DEAD END CLAMPS WITH I-HOOK (INSULATED) 57 LT PIERCING CONNECTOR 58 SUSPENSION CLAMPS WITH I-HOOK (INSULATED) 59 Clamp for Guarding MS Angle 60 Fixing of Aluminum Bus Bar & Crimping Lug 61 Fixing of LT ACB630 Amp. 62 Providing & Fixing of LT ACB Plinth 63 The followings matarial dismantalling & Carriage from site to ESC BSR including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx. 64 ACSR Weasal/Rabbit Conductor (Scrap) - 65 G.I. Wire (Scrap) - 66 XLPE/AB Cable (Scarap / Old And Damaged) 67 PCC 11 MTR LONG (Iron scrap) 68 1. Nut, Bolt, Clamps and others necessary items should be provided by contractor.2. T and P should be and other necessary machinery should be provided by contractor.3.All the MS Items must be Galvanized.All work will be done as per UPPCL/RESPO Rules and these work will be inspected by TPIA or any departmental authority.

INR 3540 /-

INR 82000.0 /-

INR 82000.0 /-