Tender For PROCUREMENT OF DIFFERENT TYPES OF ADDITIONAL HT BOTLS, NUTS , WASHERS , ETC TO BE USED FOR UNIT-4 OVERHAULING UNDER BM2, SGTPP- 1 PROCUREMENT OF DIFFERENT TYPES OF ADDITIONAL HT BOTLS, NUTS , WASHERS , ETC TO BE USED FOR UNIT-4 OVERHAULING UNDER BM2, SGTPP 2 BOLT M16X265 WITH NUT & WASHER FORDRESSER COUPLING AT COAL MILL DROP PIPE ,HALF THREAD, HT, GR.10.9 3 BOLT HT M20X80 HEX HEAD FULL THREAD GRADE.10.9 ( WITH PLAIN WASHER, HT Gr. 10.9 APPLICATION: FOR MPO BASE BOLT FOR MILL XRP 1003 MAKE: UNBRAKO/CAPARO/TVS ) 4 FASTENER HT BOLT M20X100 HEX HEAD PART THREAD,GRADE 10.9 ( with plain washer, HT, Gr.10.9 APPLICATION: MPO Base Bolt, MAKE: UNBRAKO/CAPARO/ TVS ) 5 BOLT,M20X60 ( with plain washer, HT, Gr.10.9 APPLICATION: AT MPO Top /MDV Base Bolt FOR MILL XRP 1003 Make: UNBRAKO/CAPARO/TVS ) 6 MS BOLT M20X45 WITH PLAIN WASHER,GR 4.6 FOR FASTENING COAL CHUTE AT STAGE-2 ,FULL THREAD ( APPLICATION: AT COAL FEEDER CHUTE OF MILL XRP 1003 MAKE: UNBRAKO/KAPARO/TVS/LOCAL MADE ) 7 BOLT,HEX HEAD,HT,M16X70 FT PROPERTY CLASS-8.8/10.9,IS:1364 ( BOLT M16X70 with Nut & washer, HT, GR. 10.9 APPLICATION: AT FLANGES (Chute Bottom FLANGE with drop pipe flange), MILL XRP 1003 Make: UNBRAKO/CAPARO/TVS ) 8 FASTENER MS STUD M16?110,PITCH 2MM ( MS stud M16X160 with double nuts, Gr.4.6 APPLICATION: FOR butterfly valveS at air header to supply air to MDV & power cylinder of MDV FOR MILL XRP 1003 ) 9 U CLAMP-2.5 ( GI U clamp with double nuts and threads at both ends APPLICATION: FOR FASTENING THE AIR HEADER SUPPLYING AIR TO ALL MDVS & POWER CYLINDERS, CLAMP DIA: 90 mm ) 10 MS BOLT M16X45 WITH NUT, GR 4.6 FOR STAGE-2 MRHS CONVEYING LINE ,FULL THREAD ( APPLICATION: FOR FASTENING FLANGES AT MRHS CONVEYING LINE FOR MILL XRP 1003 MAKE: UNBRAKO/TVS/CAPARO/OTHERS ) 11 RUBBER HOSE SIZE 1/2 ( 1/2 inch flexible rubber hose. MOC: HIGH QUALITY BRAIDED RUBBER APPLICATION AREA: AT DOME COOLING WATER LINE OF MRHS. ) 12 TEE # # ( 20 mm internal Threads at 3 sides and one extra cap for fitting at one side MOC: MS APPLICATION AREA: AIR BOOSTING LINE AT MRHS. ) 13 CONNECTING PIECE,20X50X125 ( 20 mm ID short piece with external thread at one end, Length of short piece: 200 mm. MOC: MS APPLICATION AREA: AIR BOOSTING LINE AT MRHS. ) 14 PIPE FITTING ( 20 mm ID short piece with external thread at both ends, Length of short piece:250 mm. MOC: MS APPLICATION: MRHS AIR BOOSTING LINE ) 15 MS REDUCER SIZE 3/4X1/2 # ( Socket type reducer for fitting 20 mm ID pipe to 15 mm ID pipe MOC: MS APPLICATION AREA: AT DOME COOLING WATER LINE OF MRHS. ) 16 TEE WITH SOCKET SYSTEM,20 MM UNIFORM LINE PRESSURE: 15 KG/CM2,MATL: PVC ( Socket type T for fitting 15 mm ID pipe MOC: MS APPLICATION AREA: AT DOME COOLING WATER LINE OF MRHS. ) 17 JUBILEE CLAMP; SIZE: 1½? ( Jubilee Clamp: 1/2 inch APPLICATION AREA: AT HOSE OF AIR BOOSTING LINE AT MRHS. MOC: GI ) 18 BEND,ALL SOCKET 22?DEG.X100MM ( Socket type 90 deg bend for fitting pipe of 20 mm ID Pipe MOC: MS APPLICATION AREA: AT WATER AND AIR LINES OF MRHS. ) 19 COUPLING # # ( 20 mm ID pipe coupling, internal thread . Length-1 inch MOC: MS APPLICATION AREA: AT AIR BOOSTING LINE OF MRHS. ) 20 HT BOLT M16X100 HEX HEAD,GRADE 10.9 FULL THREAD ( WITH DOUBLE NUTS APPLICATION:Mill +PAPH AXIAL SEAL MAKE: TVS/UNBRAKO/CAPARO ) 21 BOLT,M16X60 ( BOLT HEX 16X60, GR.10.9 WITH NUT APPLICATION:APH RADIAL SEAL, APH DOOR MAKE: TVS/UNBRAKO/CAPARO ) 22 WASHER M16 ( WASHER SIZE:ID-17MM AND OD-50MM, THICKNESS-3 MM, HT, GR.10.9 APPLICATION: FOR 16MM STUD FOR FASTENING THE COAL NOZZLE, APH RADIAL SEALING. MAKE: TVS/UNBRAKO/CAPARO/OTHERS ) 23 HOSE BARB/NIPPLE SIZE 3/4 MNPT X 1/2 ( Hose nipple 3/4 x 1/2 , 20 mm outer thread at one end and one end fitted with 1/2 rubber hose MOC: MS APPLICATION AREA: AIR BOOSTING LINE AT MRHS ) 24 UNION JOINT,MS,15NB SIZE $FOR WATER LINE APPLICATION
