|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50m.beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift up to 1.5 m.) By Mechanical Means. |
| 2 | Excavation for foundation including removing the excavated material upto distance of 50m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift up to 1.5 m.) By Mechanical Means. |
| 3 | Filling in plinth and floors with contractors’ material/brought from outside and approved by Engineer in charge in layers of 15 cm to 20cm including watering and compaction. |
| 4 | Providing soling using 80mm size trap metal in15cm.layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening the if special finish is to be provided, finishing if required and curing complete, with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). |
| 6 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). |
| 7 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 0.5 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper. |
| 8 | Providing pre constructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper. |
| 9 | Providing and laying Castin situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). With fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). |
| 10 | Providing and laying Castin situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSI Grade). |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade ) |
| 12 | providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels par is, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 13 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 14 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar1:6 in super structure including striking joints, raking out joints, watering and scaffolding etc. Complete. |
| 15 | Providing & laying in situ cement concrete M-20 of trap metal for RCC work in slabs as per detailed sqm 8 drawing and design as directed including dewatering if necessary centering, formwark, compaction, finishing the formed surface wil |
| 16 | Providing and laying in situ cement concrete M-20 with tremix treatment for 100 mm thickness for floaring with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bilumen etc |
| 17 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including basecoat of 15mm thick in cement mortar 1:4 using waterproofing compound at1 Kilogram per cement bag curing the same for not less than 2days and keeping the surface of the base coat rough to receive the sand faced treatment 6to 8mm thick in cement mortar1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. |
| 18 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (Without mechanical gear) |
| 19 | Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes and approved type and quality and iron oxidized fixtures and fastening oil paint two coats etc. complete. |
| 20 | Providing internal cement plaster 20mm thick in single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curingetc.complete. |
| 21 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 22 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete. |
| 23 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 24 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws & bolts, lead & bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). |
| 25 | Providing and applying three coats of waterproof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 26 | Providing and firing colour coated Zincalume (R) AZ150 (min 150 gms/sq mt. Total on each side profiled SOM sheets for rooling. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min 550 Mpa yield strength, metallic hot dip coated with Aluminium- Zinc alloy (55% aluminium 43 4% zinc 1.6% silicon) váth COLORBOND (R) steel quality with thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominat 10 coat on back surface. Profile sheet shall have nom. 950-1050 mm width and nominal 25-30 mm deep ribs with subtle square fluting in shall be designed for anti-capillary groove & refum leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. Fastened with min. 25 um Zinc-Tin alloy coated. Hex head, self-dolling screw etc. Complete (weight of profile 4.52 kg/sqm) (As directed by Engineer in charge.) |
| 27 | Providing and fixing of colour coated Zinc aluminium R) AZ150 (min 150 gms/sq.mt. Total on each side) SQM profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT). Hi-strength steel with min 550 Mpa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminiumm 43 4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capacity groove & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. Fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-dolling screw etc. Complete. (weight of profile 4.52 kg/sqm) 301 mm to 600 mm girth (Surface Width) (As directed by Engineer in charge.) |
| 28 | Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete. (Weight of 6.8 kg/sq.m.) |
| 29 | Providing and fixing 12 mm dia. mild steel bar upto 0.5 M. length for anchor rods with necessary threading nuts and bolts etc. complete |
| 30 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 31 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning preparing the plaster surface, applying primer coat scaffolding if necessary, and watering the surface for two days etc complete |
| 32 | Providing and fixing self supporting steel roofing system (Profiex) for a Godown or alike made up of structural grade steel sheet of 912 millimeter width (tolerance +/- 2 millimeter), moulded at site using mechanical press dies to the desired curve and shape to form 605 millimeter wide interlocking panels. The Interlocking panels shall be pressed to close the seam forming water tight joints for a span of 25.00 meter having arch rise as 5.00 meter, arch length 29.00 meter The base material made up of imported galvalume steel complying to ASTM A792 having base metal thickness of 1.20 millimeter ( tolerace +/-0.02 millimeter) with alloy coating AZ 150 and paint coating of regular modified polyster, top coat 25 micron and bottom coat 12 micron as per approved colour, Including fixing hangers, damps etc.as may be necessary of Proflex standard, including fixing sky light of 2 millimeter thick polycarbonate sheet of size 2 x 14\" and turbo ventilator of 24\" diameter to he installed at every 30 feet along the length of mof As directed by Engineer in charge. |
| 33 | Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contracior, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made up of 4 mm aluminum composite pannel sheet with 0.5 mm skin thickness on either side bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive adhesive. Retro reflective sheeting with specified background, border and back side reto reflective symbols, letters, numerals, arrow as per IRC: 67-2012 Table No 8.3, on MS.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc. and fixing MORTH 801 |
| 34 | Providing and fixing wind oppareted tarbo ventiletar systim (24 inch dia.) over exsiting roof including cutting of sheet propar fixing in position to true line & level with all fixtures & fastning, providing 0.8mm thick FRP sheet for covering area between roof and fan so as to provide waterfoof joints with approved water proffing compound making good the roof surface including cleaning etc. complete |
| 35 | Supplying 60 mm trap stone metal at the road side including conveying & stacking etc. complete. |
| 36 | Supplying 40 mm trap stone metal at the road side including conveying & stacking etc. complete. |
| 37 | Supplying hard murum at the road side including conveying & stacking etc. complete. |
| 38 | Supplying soft murum at the road side including conveying & stacking etc. complete. |
| 39 | Spreading hard murum at the road side including conveying & stacking etc. complete |
| 40 | Spreading soft murum over size metal as blindage as directed etc. complete. |
| 41 | Spreading 60 mm trap stone metal including sectioning as directed etc. complete. |
| 42 | Spreading 40 mm trape stone metal including sectioning as directed etc. complete. |
| 43 | Compacting oversize metal layer with H. M. with power roller including artificial watering & necy. Sqm Labour etc. complete. |
| 44 | Compacting size metal layer with S. M. with power roller including artificial watering & necy. Labour sqm etc. complete. |
| 45 | Compacting hard murum side width layer on each side with power roller including artificial watering etc. sqm complete. |
| 46 | Providing & fixing R. C. C. 1:2:4 guard stones as per type design including painting numbering fixing in std. NO Size C. C. 1:4:8 block complete. |
| 47 | Item No (13-A) :- Excavation for foundation in earth soil of all types sand, gravel & soft murum, depth upto1.50 meters including removing the excavated stuff upto a distance of 50 meters beyond the bldg. area all lifts stacking or spreading as directed, dewatering, shoring, strutting if necessary preparing the bed for foundation including necessary backfilling (Bd.A.1/259) |
| 48 | Item No (14) :- Providing & laying in situ cement concrete M-10 of trap metal for foundation & beddingincluding dewatering if necessary, compacting, curing etc. complete [Bd.E.1 / 287] |
| 49 | Item No (15) :- Providing U.C.R. masonary of trap stones in C.M. 1:6 in foundation & plinth including dewatering, striking joints on exposed surfaces and pointing with C.M. 1:3 on outside surfaces curing etc. complete.(Bd. H.1/329) |
| 50 | Item No (16) :- Providing & fixing in position TMT reinforcement of various diameters for R.C.C. foundations footings, columns, beams, lintels, weathersheds, canopy drops etc as per detailed design, drawing & schedule including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete (Bd.F.17/306) |
| 51 | Item No (17) :- Providing & laying in situ cement concrete M-20 of trap metal for R. C. C. work in beams and lintels as per detailed drawing and design as directed including dewatering if necessary centering, forwork, compaction, finishing the formed surface with C. M. 1:3 of sufficient minimum thickness to give smooth finish and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement) [ Bd. F. 6 / 300] |
| 52 | Item No (18) :- Providing cement plaster 20 mm thick in two coats in C. M. 1 : 4 with slurry finish to concrete or brick surface or U. C. R surface in all positions including scaffolding & curing smooth cement slurry finish of 1.5 mm thickness etc. complete as directed. [ Bd. L 4 / 368] |
| 53 | Item No (23 ) :- Preaparing embankment with approved materials obtained from the cutting within a lead of 50 m including laying in layers of 20 to 30 cms , breaking clods , dressing to the requiredlines curves grades & sections , compacting with power roller etc complete.( Rd14/195) |
| 54 | Item No (26) :- Conveying the materials obtained from excavation including all lifts, laying in layers, breaking clods, dressing to the required lines, curves, grades and section for all leads & lifts from the site of excavation to the site of deposition as directed. (Rd. 18 / P. 197) |
| 55 | Supplying & erecting mains with 2x1.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire, in HMS PVC conduit min. 20mm dia. CSR 2019-20 Item No 1-6-2 Additional specification No: WG-MA/PC. |
| 56 | Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia.CSR 2019-20 Item No 1-6-4 Additional specification No: WG-MA/PC. |
| 57 | Supplying & erecting mains with 2x4 sq.mm. and earth wire 2.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia,CSR 2019-20 Item No 1-6-6 Additional specification No: WG-MA/PC. |
| 58 | Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. |
| 59 | Supplying and erecting hylam sheet/ ebonite sheet 3 mm thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etc. complete. CSR 2019-20 Item No 6-1-9 |
| 60 | Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 12 ways on iron / GI frame (horizontal busbar type) CSR2019-20 Item No 5-4-1Additional |
| 61 | Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board. CSR 2019-20 Item No 5-3- 17 Additional specification No. SW-SWR/MCB |
| 62 | Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board. CSR 2019-20 Item No 5-3-7 Additional specification No. SWSWR/ MCB |
| 63 | Supplying & erecting conventional spike Providing earthing with galvanized iron earth plate size 60 x 60 x0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results CSR 2019-20 Item No 9-1-3 Additional specification No. EA-EP |
| 64 | Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe. |
| 65 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.CSR 2019-20 Item No 7-6-10 |
| 66 | Supplying & erecting Siemens type brass cable glands for 4 core 35 sq. mm./3 core 50 sq. mm. for XLPE armoured cable |
| 67 | Supplying & erecting crimping type copper lugs for cable 25 sq. mm. complete. CSR 2019-20 Item No 7-9-2 Additional specification No. CB-CL/CU |
| 68 | Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 2 ways for outgoing SPMCBs on iron/ GI frame. CSR 2019-20 Item No 5-4-14 Additional specification No. SW-SWR/MCBDB |
| 69 | Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF> 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete .CSR 2019-20 Item No 2-5-4 Additional specification No . FGODF/ FLS2. |
| 70 | Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads. CSR 2019-20 Item No 2-9-2 Additional specification No. FG-BKT/BPC |
| 71 | Providing and fixing lioghtening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25mm dia. 1.2 mm thick with multiple points head 1.2 mt. long ( Heavy Duty) welded or clamped to G.I. pipe pole B grade 50 mm diaof requiired length with M.S. round bnase plate 25 Cm diam and 10mm thick at bottom embeded in cement concrete 1:3:6 dfoundation of size 45 cm diam x 45 cm Height and providing earthing with copper earth plate of size 60 x 60 x 0.3 cms with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40 kg charcoal and salt with altemate layers of charcoal and salt and G.I.pipe 40mm dia 2 meter length burried 1.00 |
| 72 | Providing and fixing copper strip 25mm wide and 3mm thick for lightening conductor including fixing with screws required scaffolding etc.complete Note- Lightening conductor and earthinf pits is not considered in this item.CSR 2019-20 Item No 44.19 Additional Spec No :BDW 1 Page No 581 & As directed by Engineer |
| 73 | Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in SqM two coats including scaffolding. preparing the surfaces. (excluding the primer coat.) etc. complete |
| 74 | TOTAL COST OF PROPER BUILDING (A)Royalty -For Sand |
| 75 | For murum |
| 76 | Rubble |
| 77 | Quality control charges Items 1) Basic test of concrete(M-10) cubes for compressive strength S pec.No. .As directed by Engineer in Charge SSR I.NO.20 P.NO.387 |
| 78 | 2) Basic test of concrete (M-20) cubes for compressive trengthSpec.No. .As directed by Engineer in Charge SSR I.NO.20 P.NO.387 |
| 79 | 1) Crushed metal for concreteWater absorption, Specific gravity, Impact value ,Crushing Value |
| 80 | 2) BRICKSWater Absorption, Compressive Strength, Efflorescence (Set of 5 bricks) |
| 81 | 3) CEMENTFineness, Standard Consistancy, Setting Time(initial &final), Compressive strength, Soundness |
| 82 | 4) TMT steel barUpto 16mm bar |
| 83 | 5) SANDFinenessModulus, silt & clay content |
| 84 | 6) Murum in plinth |
| 85 | 7) SOIL Liquid limit& Plastic limit |
| 86 | Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct |
