|
| 1 | BOQ |
| 2 | Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. |
| 3 | Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge stone ballast. (SOR 279a) |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. a) Size of Tile 600 x 600 mm DSR-11.41.2) |
| 5 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.DAR18/11.46.2 |
| 6 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600 x 600 mm. Based on DSR18 - 11.48.2) |
| 7 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete. Based on DSR18-11.36) |
| 8 | Brick work with non modular fly ash bricks conforming to IS:12894, Class designation 10 average compressive strength in super structure above plinth level up to floor V level in :(SOR New Chapter No. 12 ) |
| 9 | Cement Mortar 1:6 (1 cement : 6 Coarse sand) |
| 10 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry (with M-150 bricks). (DSR-2018/6.15/AR) |
| 11 | Autoclaved Areated Concrete block (AAC Block) (sor) |
| 12 | Case II RCC Grade M20using batching plant transitmixer & manual placing. Morth-20/15.11/ p-653 |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level (Sail Steel) |
| 14 | Thermo-Mechanically Treated bars of grade Fe-500D or more.DAR18/5.22.6 |
| 15 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)DAR18/13.4.2 |
| 16 | Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from MS. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.l. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.l. channel with connecting clips made out of 2.64mm diax230mm long G.l. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I. DSR- 12.45.1) |
| 17 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. DSR-12.52.2) |
| 18 | Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats. Pwd sor |
| 19 | Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters andalso including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour,Tools & plants etc.required for proper completion of the work. (SOR- 649) |
| 20 | As in item (649) above but for every coat after the first coat.(SOR- 650) |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately |
| 22 | Second class teak woodDAR-18/9.1.1 |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 24 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DAR-18/9.20.2 |
| 25 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of doorshutter to be measured). DAR-18/9.23 |
| 26 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc.complete2nd class teak wood |
| 27 | 50 x 20 mmDAR-18/9.40.1.2outer frames of doors |
| 28 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.DAR-18/9.3.1 |
| 29 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS :12823 marked, including priming coat on unexposed arrangement andscrews etc. complete : |
| 30 | 12 mm thick DAR-18/8.26.1 |
| 31 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : |
| 32 | Decorative veneer facings of approved manufactureDAR-18/8.28.1 |
| 33 | Melamine polishing on wood work (one or more coat).DAR-18/13.114 |
| 34 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete250x10 mmDAR-18/9.74.1 |
| 35 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.DAR-18/9.76 |
| 36 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.DAR-18/9.83 |
| 37 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. |
| 38 | White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.DAR-18/17.68.1 |
| 39 | 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long withS.S. tringular plate for Eureopean type W.C.DAR-18/1313 |
| 40 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal boreDAR-18/18.53.1 |
| 41 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour |
| 42 | 15 mm nominal bore with 45 cm lengthDAR-18/18.74.2 |
| 43 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever require. |
| 44 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tapsDAR-18/17.7.1 |
| 45 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. |
| 46 | Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms DAR-18/17.70.1 |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 48 | 15 mm nominal outer dia PipesDAR-18/18.7.1 |
| 49 | 20 mm nominal outer dia PipesDAR-18/18.7.2 |
| 50 | 25 mm nominal outer dia PipesDAR-18/18.7.3 |
| 51 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 52 | 15 mm nominal boreDAR-18/18.50.1 |
| 53 | 100 mm dia Centrifugally cast (spun) Iron S&S pipe as per IS: 3989(DAR18/17.35.1.2) |
| 54 | 75 mm dia Centrifugally cast (spun) Iron S&S pipe as per IS: 3989(DAR18/17.35.2.2) |
| 55 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts & nuts complete. |
| 56 | 100 mm dia Centrifugally cast (spun) Iron S&S as per IS: 3989(DAR18/17.38.1.2) |
| 57 | Providing and fixing plain bend of required degree. |
| 58 | 100 mm dia Centrifugally cast (spun) Iron S&S as per IS: 3989(DAR18/17.39.1.2) |
| 59 | 75 mm dia Centrifugally cast (spun) Iron S&S as per IS: 3989(DAR/17.39.2.2) |
| 60 | Providing and fixing single equal plain junction of required degree. |
| 61 | 100x100x100 mm Centrifugally cast (spun) Iron S&S as per IS: 3989(DAR18/17.44.1.2) |
| 62 | 75x75x75 mm Centrifugally cast (spun) Iron S&S as per IS: 3989(DAR18/17.44.2.2) |
| 63 | Providing and fixing single unequal plain junction of required degree. |
| 64 | 100x100x75 mm Centrifugally Cast (spun) Iron S&S as per IS: 3989(DSR/17.48.1.2) |
| 65 | Providing and fixing collar. |
| 66 | 100 mm Centrifugally cast (spun) Iron S&S as per IS: 3989(DAR18/17.57.1.2) |
| 67 | 75 mm Centrifugally cast (spun) Iron S&S as per IS: 3989(DAR-18/17.57.2.2) |
| 68 | Providing lead caulked joints to sand cast iron/ centrifugally cast(spun) pipes and fittings of diameter. |
| 69 | 100 mm(DAR18/17.58.1) |
| 70 | 75 mm(DAR18/17.58.2) |
| 71 | Providing and fixing MS stays and clamps for sand cast iron/centrifugally cast (spun) pipes of diameter. |
| 72 | 100 mm(DAR18/17.59.1) |
| 73 | 75 MM(DAR18/17.59.2) |
| 74 | Labour Cess will be paid extra as per applicable |
| 75 | GST will be paid extra as per applicable |
