Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-07-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-07-2024 |
| 2 | 11-07-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-07-2024 |
| 3 | 29-06-2024 | REVISED BOQ | BOQ | 11-07-2024 |
| 4 | 28-06-2024 | CORRIGENDUM NO 01 | Date | 11-07-2024 |
| Sl. No. | Item Description |
| 1 | Dismantlingsingle layer Mangalore pattern or similar tiles in roofing complete all as specified and directed. |
| 2 | Dismantling battens for tiles of any size including tilting fillets, spaced exc 15cm complete all as specified and directed. |
| 3 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 4 | Dismantling timber scantling 40 sq cm and over in section, unframed work, in any positioncomplete all as specified and directed. |
| 5 | Dismantling wall & ceiling Boards ( fibre,pulp,insulation etc. ),or insulation board/slabs/ blankets, any thickness, including cover fillets complete all as specified anddirected. |
| 6 | Dismantlingfloor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed. |
| 7 | S&F mangalore pattern pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick(AZ-150) of anycolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 8 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick(AZ-150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 9 | S&F MS powder coated snap grid frame work for false ceiling with angle 25 mm x 25 mm x 1.5 mmfixed to perimeter of wall, main \"T\" runner 38 mm x 25 mm x 1.5 mm and secondary/cross \"T\" runner 25 mm x 25 mm x 1.5 mm to be interlocked in such a way that the size of grid shall be 605 mm x 605 mm including 6 mm dia GI hangers (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40 x 3 mm, 60 mm long and expansion hold fasteners 12.5 mm dia , 40 mm long and 4 mm thick Non asbestos fibre board (E-board or V board) designer tiles (Electra) suitably fixed in false ceiling grid/frame with staples or screws complete all as specified anddirected. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 11 | S&F rolled mild steel work as inroof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc, conforming to Fe-410-W(Gde-E-250), Quality- A,complete all as specified and directed. |
| 12 | S&F MS steel flat iron as in wind tie conforming to Fe-410-W(Gde-E-250), Quality- A, for roof sheet including securing bolts complete all as specified and directed. |
| 13 | DismantlingStone slabs and tiles of any description or thickness in floors, aprons etc.complete all as specified and directed. |
| 14 | M&L for PCC 1:2:4, 25mm thick type B-0 using 12.5 mm gradedcrushed stone aggregate as in sub base complete all as specified and directed. |
| 15 | S&F VitrifiedCeramic tiles 10 mm thick (square/ rectangular), polished, area of each tile not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 16 | S&F VitrifiedCeramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm as in skirting/dados etc., set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith the shade of tile, laid over and including10 mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 17 | S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, laid over and including15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 18 | S&F Non skid ceramic tiles (400x400)x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including15 mm thickbedding layer in CM 1:6 complete all as specified and directed. |
| 19 | S&F Glazed ceramic tiles (450x300)x 7 mm thick, in dado/skirting,set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith the shade of tiles, laid over and including10 mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 20 | M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including20mm thick cement screed in CM( 1:6) base, laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 21 | M&L for Kota stone slab 20-25mm thick in riser, steps, skirting or dado and pillar, laid over and including10mm thick backing coat in CM (1:4) and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 22 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding, laid over and including20 mm thick screed bed in CM (1:4) andincluding moulding and rounding complete all as specified and directed. |
| 23 | M&L for Machine cut cudappah stone slab 20-25mm thick, laidover and including cement screed bed in CM(1:4), laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 24 | Taking down chowkhat n exc 1.5 sqm each without taking off shutter from frame complete all as specified and directed. |
| 25 | Taking down chowkhatexc 1.5 sqm and n exc 4.00 sqm each without taking off shutter from framecomplete all as specified and directed. |
| 26 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 27 | S&F powder coated aluminium ventilator shutters, partly fixed and partly louvered type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specifiedand directed. |
| 28 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 29 | S & F powder coated aluminium sliding windows three track with two glass shutters using 4 mm thick glass tinted and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using aluminium section powder coated , aluminium cleat, PVC track, bearing, handle, lock, rubber beading, etc complete.NoteSize of aluminum sections are as under :-(i) Shutter vertical section - Jindal main – 2010 Section No 20606.(ii) Shutter top & bottom - Jindal main – 2010 Section No 20604(iii) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.Note : 4 mm thick tinted glass and wire cloth shall be measured and paidfor separately against relevant item of this BOQ. |
| 30 | S&F 4 mm thick tinted sheet glass, with necessary clip or clamp, screws etc in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 31 | S&F 125X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified andas directed. |
| 32 | M&L for plain cement concrete Type C1, 1:3:6 ( using 20 mm graded aggregate) for filling of hollowpressed steel frame complete all as specified and directed. |
| 33 | S & F 25 x 3mmFI hold fast conforming to Fe 290, Gde -E-165 complete all as specified and directed. |
| 34 | M&L for plain cement concrete(1:2:4),Type B-0 ( using 12.5 mm graded crushed stone aggregates) for fixing hold fast including repairing of disturbed plaster ( while taking down Door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed. |
| 35 | M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed.Notes:- (i) glazing will be measured and paid for separately. (ii)Butt hinge will be measured and paid for separately . |
| 36 | S&F 35mm thick second class hardwood factory made flush shutters, solid, core construction with black board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 37 | S & FFactory made solidPVC door frame of size 50 mm x 47 mm, made out of 5 mm plain coloured PVC sheet reinforced with MS square tubecomplete all as specified & directed. |
| 38 | S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed. |
| 39 | S&F 100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 40 | S & F 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 41 | S & F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed. |
| 42 | S/F 150 mmlong aluminum anodized barred tower bolts of extruded section complete all as specified and directed. |
| 43 | S & F Aluminium door stopper of size 150 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed. |
| 44 | S&F MS 300mm helical door springs including roller and roller plate complete all as specified and directed. |
| 45 | S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 46 | S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawing specified & directed. |
| 47 | S&F 18mm thick Solid PVC Sandwich Panel with1 mm plain colour PVC Sheet on both sides suitably fixed in M.S. angle framework as per specification & drawing(Note : MS work shall be measured and paid for separately against relevant item of this BOQ) |
| 48 | Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed. |
| 49 | Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed. |
| 50 | Demolition of cement concrete (un-reinforced)in roof/floors other than ground level beam, stair case, landing, chajjas and similar items includingwater proofing treatment in any layersand removal of debris to distance exceeding 250m and not exceeding 500m from the site complete all as specified and directed. |
| 51 | Demolition of cementConcrete(un-reinforced) of any description and in any position not otherwise specifically provided forcomplete all as specified and directed. |
| 52 | M&L PCC (1:2:4) type B-1 (20mm gradedcrushed stone aggregate) as in kerbs/coping and the like including weathering, slightly rounded or chamfered angles and throating, including formwork complete all as specified and directed |
| 53 | Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed. |
| 54 | M&L for brick work with sub class \"B\"fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed. |
| 55 | M&L 10 mm thick Renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 56 | M&L 15mm thick rendering on fair faces of brick surfaces in CM (1:4), first coat 10 mm thick plaster in CM (1:4) and second coat 5 mm thick in CM (1:4) mixedwithliquidwater proofingcompound,finished surfaces even and smooth without using extra cement complete all as specified and directed. ( Note : Liquid water proofing compoundshall be measured and paidfor separately as \"Supply only\".) |
| 57 | Supply onlyliquid water proofing compound ISI Marked,of make as approved by GE complete all as specified & directed. |
| 58 | M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 59 | Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 60 | Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 61 | S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed. |
| 62 | S&F 20 mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed. |
| 63 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing , etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed. |
| 64 | Dismantling of water tank of any description of capacity exc. 500 litres but not exc. 1000 litres, removing to store or from the site complete all as specified and as directed. |
| 65 | Supply and fix 1000 ltrs capacity rotational moulded polyethylene water storage tank, ISI Marked,double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed. |
| 66 | S&F 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 67 | S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both end for ironpipe complete all as specified and directed. |
| 68 | Demolition and breaking up 100 mm dia drain pipes (Salt glazed ware, PVC, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 69 | Demolition and breaking up drain pipes 150 mm (salt glazed ware or reinforced concrete) inclPCC bedding & hauching set in cement morter of following dia complete all as specified and directed. |
| 70 | S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed. |
| 71 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls75mm bore complete all as specified and directed. |
| 72 | S&F 110mm bore PVC (S.W.R) bend with access door complete all as specified and directed. |
| 73 | S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal with access door complete all as specified and directed. |
| 74 | S&F 75mm bore PVC (S.W.R) bend with access doorcomplete all as specified and directed. |
| 75 | S&F 110mm bore PVC vent cowl complete all as specified and directed. |
| 76 | S&F PVC floor trap 75 mm dia with CP gratings complete all as specified and directed. |
| 77 | S&F PVC nahani trap 110 mm dia with CP gratings complete all as specified and directed. |
| 78 | S&Fin repairs brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm fixed complete all as specified and directed. |
| 79 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed. |
| 80 | Supply & fix vitreous china squatting pan, Orissa pattern of size 580x440 mm white, with integral foot rest and PVC \"P\" or \"S\" trap including connection to trap, and to flush pipe, etc (excluding flushing pipe) and making good to floor complete all as specified & directed. |
| 81 | Supply only PVC valveless syphonic action type flushing cistern 10 ltrs capacity low level, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified. |
| 82 | S&F in repair vitreous china white counter oval shape wash hand basin of size 630x450mm incl brackets complete all as specified. |
| 83 | S&F in repairs sinks made of stainless steel 1 mm thk kitchen with plugs, washers and wastes includingbedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm bowl size size 410mm X 330 mm X 160MM including 40 mm coupling complete all as specified and directed. |
| 84 | S&F waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia.etc. complete all as specified and directed. |
| 85 | S&F in repairs tubular towel rail 20 mm dia \"D\" type 600mm long of stainless steel complete all a specified and diredted. |
| 86 | S&F in repairs 450 mmx600 mm looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood or PVC and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 87 | S&F in repairs for brass chromium plated, 15 mm bore health faucet, (flexibletype) min 1.00 mtr long complete all as specified and as directed. |
| 88 | S&F in repairs for brass chromimum plated two way bib cock fancy type, 15mm bore complete all as specifed and as directed. |
| 89 | S&F in repairs angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified |
| 90 | S&F in repairs 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed. |
| 91 | S&F 15 mm dia brass CP wall mixer unit for mixing hot & cold water screwed down for iron pipe and fixed including all necessary fittings complete all as specified and directed. |
| 92 | S&F in repair 15mm bore fancy type central hole basin mixture , chromium plated, complete all as specified and directed. |
| 93 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 94 | S & F Salt glazed stone ware gully trap 150mm squaretype \"P\" includng MS gratings suitable to 150 x 150 mm gully trap and including PCC chamber 10 cm thick and RCC cover 75mm thick in (1:2:4) reinforced with 8mm dia TMT barat 75mm C/C bothways,set in CM (1:6) complete all as specified and as directed. |
| 95 | S&F, in repair, 20 mm dia curtain rod brass chromium plated with fixing fancy bracket stops rollersetc complete all as specified and directed. |
| 96 | S&F in repair kitchen steel plate rack of size 786x914x254 mm stainless steel of standard quality complete all as specified and directed. |
| 97 | S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 98 | S&F in repairglass corner 8 to 10 mm thick of 300 mm dia with Stainless Steelrailing over it including all fittings and fixtures complete all as specified and directed. |
| 99 | M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applyingtwocoat of synthetic enamel paintover a coat of red oxide primer as approved by GE complete all as specified & directed. |
| 100 | M&L for preparationof new or previously untreated surfaces of steel of any description, not exc 10cm in width or girth when unconnected with other painting and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 101 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat synthetic enamel paint of colour as approved by GE over and including a coat of pink primer complete all as specified & directed. |
| 102 | M&L for preparing newplastered or unplastered surfaces of walls and applying two coats of distemper, oil emulsion,white or tinted,with and including 2mm thick wall care putty in two layers and one coat ofappropriate primer complete all as specified and directed. |
| 103 | Material and Labour including preparation of new plastered wall surfaces and applying three coat of white Wash completeall as specified and directed |
| 104 | M&L for prepraring newly plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed. |
| 105 | M&L for preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed. |
| 106 | M&L for complete removal of existing treatment on wall and applying two coats of distemper oil emulsion over a coat of primer and avg 2 mm thick wall care putty in two layerscomplete all as specified and directed. |
| 107 | M&L for complete removal of existing treatment on wallandapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed. |
| 108 | S & F in repair PVC waste pipe 32mm dia x 600 mm long complete all as specified and directed. |
| 109 | M&L for PCC 1:4:8 type D2, 75mm thick using 40mm graded aggregate as in sub base complete all as specified and directed. |
| 110 | M&L for PCC 1:3:6 type C2, 75mm thick using 40mm graded aggregate as in sub base complete all as specified and directed. |
| 111 | M&L 60 mm thick glossy finish machine pressed precast concrete interlocking paver blockwith grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade, laid over and including 50mm thick sand cushioning complete all as specified and directed. |
| 112 | S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed. |
| 113 | Supply and fix in repair swan neck long body 15 mm bore CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 114 | Dismantling of water tanks of exc 500 ltrs and n exc 1000ltrs capacity and removingfrom siteandS&F of 500 ltrs and n exc 1000 ltrs rotational moulded polythelene water storage tanks ISI marked(Cylindrical vertical with closed top), double layered, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 115 | Dismantling of water tanks of exc 1000 ltrs and n exc 2000 ltrs capacity and removingfrom site andS&F of 1000 ltrs and n exc 2000 ltrs rotational moulded polythelene water storage tanks ISI marked(Cylindrical vertical with closed top), double layered, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 116 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete including removal of debris to out side MD land complete all as specified & directed. |
| 117 | Dismantling Galvanized barbed steel wire any size complete all as specified and directed. |
| 118 | Surface excavation n exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 119 | Excavationin trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any typeof soil complete all as specified and directed. |
| 120 | Excavationin trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out insoft/loose soil complete all as specified and directed. |
| 121 | Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed. |
| 122 | Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed. |
| 123 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 124 | M&L for PCC (1:4:8) Type D-2 using 40 mm graded crushed stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed. |
| 125 | M&L RCC M-25 design mix (using 20mm gradedcrushed stone aggregate) in foundations including rafts, footings, foundation beam, plinth beams,bases for columns etc basement slabs ,under -reamed piles and mass concrete complete all all as specified and directed. |
| 126 | M&L RCC M-25 design mix (using 20mm gradedcrushed stone aggregate) in columns pillars piers posts and struts complete all as specified and directed. |
| 127 | M&L RCC M-25 design mix (using 20 mm gradedcrushed stone aggregate) asin Beams, cantilevers, bressummers, lintels over 1.5m span complete all all as specified and directed. |
| 128 | Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed.Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ. |
| 129 | M&L for mild steel TMT bars10 mm dia and overas in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 130 | M&L for mild steel TMT bars8 mm dia as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 131 | M&L for mild steel TMT bars 8 mm dia as in stirrups, spacers and binders for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 132 | S&F 16 mm dia round bars cut to length bent to shape required, including cranking, bending with mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 133 | M&L Rendering 15mm thickin CM (1:4) on other thanfairfaces of brick work or concrete surfaces, to be finshed even and smooth without using extra cement complete all as specified and directed. |
| 134 | M&L 10mm thick rendering in CM (1:4) onbrick or concretefair faces, finished even and fair without using extra cementcomplete all as specified and directed. |
| 135 | M&L for prepration of new plastered surfaces of walls and applying two coats of cement base paint over & including a coat of cement base primer complete all as specified & directed. |
| 136 | M&L form work to sides of pillars , posts, struts, piers,columns and stanchions for rough finished surfaces of concretecomplete all as specified and directed. |
| 137 | M&L form work to sides of concrete foundation, footings bases of columns sides and soffits of foundation and plinth beams and similar work vertical or to batter for rough finished, flat surfacecomplete all as specified and directed. |
| 138 | M & L formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. roughfinished surfaces of concrete, flat, complete all as specified and directed. |
| 139 | M&L for mild steel work conforming to Fe-290 Gde -E-165 as in hand rail, holdfast,half round or other steel section or core for wooden hand rail strait portion, drilled and countersunk for balusters running bars for doors, nosing to steps including embedingin concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed. |
| 140 | S&F galvanised 2 strand, steel barbedwire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)all as specified and directed. |
| 141 | M&L for PCC (1:3:6) Type C-2 using 40 mm graded crushed stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed. |
| 142 | M&L for PCC (1:2:4) type B2using 40mm graded crushed stone aggregate as in surface channels and drains complete all as specified and directed. |
| 143 | M&L for PCC type type B1 (1:2:4) using 20mm graded crushed stone aggregate, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 144 | M&L RCC (Design Mix) M-25 ( using 20 mm graded aggregate ) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed. |
| 145 | M&L RCC (Design Mix) M-25 ( using 20 mm graded aggregate)Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 146 | M&L Rough finished square/rectangular or polyganal surfaces of concrete formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 147 | M&L Rough finished Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed. |
| 148 | S&F 450 mm bore Reinforced concrete pipes class NP3, laid and jointed complete with collars complete all as specified and directed. |
| 149 | M&L PCC (1:3:6) type C2, 40mm gradedcrushed stone aggregateas in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 450 mm bore complete all as specified and directed. |
| 150 | M&L PCC 1:3:6 type C2, 40mm graded agg as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm bore complete all as specified and directed. |
| 151 | M&L for 75mm bore UPVC Pipes (Sch-40) laid in weep holes complete all as specified & directed. |
| 152 | M&L for 40 mm thick (Avg) PCC (1:2:4) Type B1 using 20 mm gradedcrushed stone aggregate as inlevelling course ,to match the undulations of roof complete all as specified and directed. |
| 153 | M&L for rendering 10 mm thickon fair faces of concrete surfacein cement mortar (1:3) mixed with liquid water proofing compound,for receivingthe roof finishes complete all as specified and directed. ( Note : Liquid water proofing compound shall be measured and paid for separately as \"Supply only\".) |
| 154 | M & L for fillet of 75mm size using PCC(1:2:4) Type B-1 (using 20mm graded crushed stone aggregate)at the junction of all horizontal and vertical surfaces complete all as specified and as directed. |
| 155 | M&L for APP based polymeric membrane minimum weighing 3.00 kg/Sqm and minimum 3mmthick reinforced with polyster non wovenfabric (wt not less than 160 gm/sqm) laidoverprimed surface including bituminous primer conforming to IS-3384-1965 applied @ 0.3 ltr/ Sqm by forced application complete all as speficiedand directed as under (For Approachable roof) :-(i) Applying one coat of bituminous primer conforming to IS-3384-1965@ 0.30 ltr/Sqm.(ii) laying APP based membrane as specififed.(iii) Applying a layer of blown gradebitumen85/25 @ 1.2 Kg/Sqm conforming to IS : 702 |
| 156 | M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( wt not less than 150 gms /sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltr/Sqm by forced complete all as specified and directed as under ( For non-approachable roof):-(a) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr per sqm.(b) Laying of APP based membrane as specified thickness and weight.(c)Applying two coat of aluminium paint @ 100g/sqm in each coat. |
| 157 | M&L forCement concrete tiles 25 cm x 25 cm x 22 mm thick, machine pressed, laid over andincluding15 mm thick screed bed in CM 1:4mixed withliquidwater proofing compound complete all as specified and directed. ( Note : Liquid water proofing compoundshall be measured and paidfor separately as \"Supply only\".) |
| 158 | S&F glossy finished Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, laidoverand including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 159 | M&L for PCC 1:5:10, type E-2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 160 | M&L 15 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:3) mixed with liquid water proofing compound,finished even and smooth without using extra cement complete all as specified and directed.( Note : Liquid water proofing compoundshall be measured and paidfor separately as \"Supply only\".) |
| 161 | M & L for applying acrylic cementitious polymer modified elastomeric waterproofing & protective coating like brush bond of Fosroc or Pidifin 2K (Pidilite) as per manufacturer\"sinstructions on rendered surfaces of floor and wall of sunken portion complete all as specified and directed. |
| 162 | Material & labour for 5 mm thick cement plaster on ceilingin cement mortar 1:3 finished even andsmooth without using extra cementcomplete all as specified and directed. |
| 163 | Material & labour for preparation of new plasteredsurfaces of ceilingand applying two coat of white lime wash complete all as specified and directed. |
| 164 | Complete removal of existing treatment of ceiling surfaces and similar surfaces at any height including necessary scaffolding and applying two coat of white wash (lime) complete all as specified and directed. |
| 165 | M&L for 150mm dia reinforced cement concrete pipeNP-2, laid and jointed complete with collars all as specified. |
| 166 | S&Frolled mild steel workin plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe- 410W (Gde E 250) quality-A, complete all as specified and directed. |
| 167 | S & F flue pipes 250 mm dia of mild steel sheet, black, in suitable lengths as approved by GE,fixed to walls complete all as specified and directed. |
| 168 | S & F 250 mm dia cowls (with 3 stays), riveted to and including 15 CM length of flue pipes complete all as specified and directed. |
| 169 | M & L Hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface with broken stone or boulders complete all as specified and directed. |
| 170 | M&L for prepraring newly plastered surfaces of wall and applying two coat of exterior emulsion paintover a coat of primer after preparation of surfaces, at any height including necessary scaffolding etc complete all as specified and as directed. |
| 171 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, bell,bell push,regulators, sockets etc removing materialsfor taking creditand making good disturbed surfaces of walls, floors, etc |
| 172 | Taking down unservicable/partly unservicable street light /light fittings any type, tube light fitting and fixtures, etc, complete all as specified and directed |
| 173 | Dismantling unserviceable main switch/ kitkat DBs/ MCBs/Meter including wooden board from existing position complete all as specified and directed |
| 174 | Taking down sub main wiring of any size/capacity complete all as specified and directed |
| 175 | Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 20 mm widthwith MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface allas directed and specified. Notes : (1) Making good to match with the adjoining surface shall be included in the unit rate. (2) Rate is inclusive of Cutting/chases of wall/floor/ceiling. |
| 176 | One light point controlled by one, one way switch 5/6 Amp |
| 177 | One ceiling /exhaust fan point controlled by one switch and regulator 5/6 Amp |
| 178 | one 3 pin 5 amp socket out point on the same board with other switches. |
| 179 | One3 pin 5 amps socket out let point on independent board |
| 180 | One bell/buzzer point controlled by one bell push. |
| 181 | One 3 pin socket outlet, 15 Amps, independent, with cables 4 sqmm size. |
| 182 | M&L Modular Switch 1 way 6A, 1 module complete all as specified and directed. |
| 183 | S &F Modular Socket 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 184 | M&L Modular switch socket outlet 3 pin 6 Amp Flush typecomplete all as specified and directed |
| 185 | M&L Switch socket combination 16A, 6 pin, 3 Module complete all as specified and directed. |
| 186 | S &F Ceiling rose, surface bakelite 65x50 mm three terminal complete all as specified and directed |
| 187 | S &F Call bell AC-230 Volt single pole ding dong complete all as specified and directed |
| 188 | S &F Bell push, flush type 5 Amps complete all as specified and directed. |
| 189 | S &F Electronic regulator 100/120 Watt step type complete all as specified and directed |
| 190 | S &F Lamp holder insulated body with back plate for angle holder complete all as specified and directed |
| 191 | S&F LED lumanaire 600mmX600mm 36 Watts 220V AC recessed type with high Efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable with suitable sizeand mounting clamps etc complete all as specified and directed. |
| 192 | S &F LED tube light fittings 1X20 Wattdecorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 193 | S &F earth enclosure with 2 pin earth plug sokcet complete with MCB SP,flush mounting type complete all as specified and directed |
| 194 | Taking down ceiling fan /EXHAUST FAN of any size or make complete all as specified and directed |
| 195 | S&F Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sq mm, earth continuity conductor of size 6 Sq mm to be drawn through and including PVCconduit 25 mm dia medium grade conceled in walls/roof/floorsall as directed by Engineer in Charge. Notes:- (i)Two wires of 6 Sq mm and one wire of 6 Sq mmand one run of PVC conduit shall be measured as one unit. |
| 196 | S&F Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sq mm, earth continuity conductor of size 4 Sq mm to be drawn through and including PVCconduit 25 mm dia medium grade conceled in walls/roof/floorsall as directed by Engineer in Charge.Notes:- (i)Two wires of 4 Sq mm and one wire of 4 Sq mmand one run of PVC conduit shall be measured as one unit. |
| 197 | S&F MCCB DB VERTCLE TYPE made of sheet steel , powder painted with 200 A, neutral link,IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door , complete all as specified and directed |
| 198 | MCB DB made of sheet steel , powder painted withNUTRAL bus bar 200 A, neutral link, earth bar and Din rail ,240Volts SPN with 8 way Single door , IP-43-IK09 protection grade, complete all as specified and directed |
| 199 | S&F MCB/Isolator SPN 240 Volts, \"C\" series, breaking capacity 10 KA of rating 40Amps complete all as specified and directed |
| 200 | S&F MCB/Isolator SP 40 Amps240V complete all as specified and directed |
| 201 | S&F MCCB TPN 125 Amps , 415Volts ,4 POLE, 16 KA complete all as specified and directed |
| 202 | Supply and fixing 415V 10KA \"C\" curve miniature circuit breaker MCB TPN 63 Amp current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed |
| 203 | M&L for earthing complete with galvansided steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed.Note:- GI wire and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor. |
| 204 | Supply & fix GI pipe bracket suitable for 35w security light fitting ,made out of 25mm dia- 0.9m long & 2 set of clamps made out of 30x5mmMS flat & fixed with anchor bolt including taking down of oldunserviceablebracketcomplete all as specified and directed |
| 205 | Supply and fix LED security light fitting of 35 watt, 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corossion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed |
| 206 | Taking down old geyser of any make and size and depositing it at E/M Store complete all as specified and directed |
| 207 | Taking down & Fixing only and connecting electric meters upto 25 amps complete all as specified and directed |
| 208 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection pieceetc. complete all as specified and directed |
| 209 | S&F Ceiling fans, BLDC, complete with three blade, down rod, accessories 230V, 1200mm sweep, with squirrel cage induction motor complete all as specified and directed. |
| 210 | S&F Exhaust fan, steel body AC single phase, 230V of size 300mm sweep with blades and frames and louvers complete all as specified and directed |
| 211 | Supply and laying or fixing or passing in trenches/ on pole/ through pipes,1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 35sqmm, 3.5 core including jointing materials such as cable glands & lugs etc Complete all as specified anddirected. ( Note : Excavation and Earthwork, sand cushioning and cable protection shall be measured and paid for separately against relevant items of this BOQ.) |
| 212 | Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed( Note: Punned thickness will be measured for payment). |
| 213 | Supplying and layingunreinforced precast concrete cable cover, type 2, Class LV,flat, size 300mmX180mmX40mmcomplete all as specified and directed . |
| 214 | Supply & Fix25mm bore steel Tubes, \"Medium grade\", galvanised, with all fitting; laid in trenches, complete all as specified and directed . |
| 215 | Supply & Fix20mm bore steel Tubes, \"Medium grade\", galvanised, with all fitting; laid in trenches, complete all as specified and directed . |
| 216 | Supply & Fix 15mm bore steel Tubes, \"Medium grade\", galvanised, with all fitting; laid in trenches, complete all as specified and directed . |
| 217 | S&F MCCB TPN 100 Amps , 415Volts ,4 POLE, 25 KA complete all as specified and directed |
| 218 | S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA, complete all as specified and directed |
| 219 | Supply & fixingamp rating MCB SPN 240 Volts, \"C\" series, breaking capacity 10 KA of rating 6-32Amps , complete all as specified and directed |
| 220 | Supply & fixing MCB SP 6-32 Amps\"C\" series, breaking capacity 10 KA of rating, complete all as specified and directed |
| 221 | S&F Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed . |
| 222 | Taking down & Fixing onlyafter servicing and connecting electric meters upto 25 amps, complete all as specified and directed |
| 223 | Schedule of credit amount of Rs 5,28,407.00to be deducted during AOC |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
