Military Engineer Services-MES has published Tender For Spl Repairs To Bldg No P-529 At Hq Afc Chakkargaon Under Ge Brichgunj Port Blair.. Submission Date for this Tender is 03-06-2024. Building Work Tenders in South Andamans Andaman And Nicobar Islands. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified and directed. |
| 2 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for slab,shelves etc complete all as specified and directed |
| 3 | Demolition of Precast Concrete work built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 4 | Taking down cement plaster of any descriptionon brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 5 | Dismantling floor, hearth or wall tilesincluding cement mortar bedding(but not backing) andremoving serviceable tiles to stores and rubbish off the premises complete all as specified and as directed. |
| 6 | Taking down chowkats or frames(without taking off shutters from the frame) area n.exc 1.5 Sqm each complete all as specified and as directed. |
| 7 | Taking down chowkats or frames(without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified and as directed. |
| 8 | M&L 25mm thick cement concrete type B-1, 1:2:4 (using 20mm graded aggregate ) as in sub base of flooring for correction of slope complete all as specified and directed. |
| 9 | M&L providing cement concrete type B1 1:2:4 ( using 20 mm graded aggregate) in coping including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 10 | Dismantling of stone slabs and tiles of anydescription or thickness in floors, approns and laid bedded and pointed in any mortar etc complete all as specified and as directed. |
| 11 | Use and waste of form work to sides and sofit of Slab & Chajja etc for Fair finished surfaces complete all as specified and as directed. |
| 12 | M & L for RCC- M -30 Design Mix as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in,shelves and the like all as specified |
| 13 | M&L Mild steel corrosion resistant TMT bars 10mm dia and over cut to length, bent to shape required including cranking and bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia) or securing with clips complete all as specified and as directed. |
| 14 | M&L Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over Screed bed or bedding layer of15 mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed. |
| 15 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in neatcement slurry and pointed in white or coloured cementwith pigment to match over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 16 | M&L Glazed ceramic coloured/ printed tiles (450X350mm) x6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neatcement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed. |
| 17 | M&L Light shade Vitrified ceramic tiles 10mm thick (Square/rectangular) area of each tile exc 0.42 Sqm but n exc 1.00 Sqm, in floors etc set and jointed in neatcement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 18 | All as per item No. 18.00 above except screed bed but in skirting/dado laid over 10mm thick cement plaster in cement mortar 1:4 complete all as specified |
| 19 | M&L for Pre-cast cement concrete block masonry Type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed |
| 20 | M&L for precast cement concrete block masonry with solid Type C1 1:3:6 (20mm graded aggregate as per IS 383) n.ecx 10 cm in width and setting in CM 1:6 complete all as specified and directed |
| 21 | M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cementcomplete all as specified and directed |
| 22 | M&L 15mm thick rendering on brick work or concrete surfaces in two layers of 5mm thk CM 1:4 including WPC over a coat of 10 mm thk CM 1:6 finsihed the surfaces even and smoothwithout using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid seperately. |
| 23 | Supply only integral water proof compoundcomplete all as specified and directed |
| 24 | M&L rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling complete all as specified and directed. |
| 25 | M & L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of putty complete all as specified and as directed. |
| 26 | M & L for preparation of old plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of puttycomplete all as specified and as directed. |
| 27 | M & L for preparing newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of putty complete all as specified and as directed. |
| 28 | M & L for preparing old plastered ceiling surfaces and applying one coat of oil bound distemper complete all as specified and as directed. |
| 29 | M&L Preparation of newly plastered surfaces of wall & applying Material & Labour for applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over a coat of putty complete all as specified and directed. |
| 30 | M & L for preparation of existing old plastered surfaces of wallsand applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over a coat of putty complete all as specified and directed. |
| 31 | S&F solid PVC door frame of sixe 50mmx47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube in opening as per specification and drawingcomplete all as specified and directed |
| 32 | S&F factory made solid panel PVC Door shutter 30mm thick (S type) consisting of frame made out MS frame shall be covered with heat moulded woodgrain printed PVC "C" channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and woodgrain printed PVC sheet for top rail, lock rail, & bottom rail; Panneling of colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing. |
| 33 | M&L Painting two coats of synthetic enamel paint over a coat of red oxide including preparation of new steel surfaces of any description over 10cm in width or girth not other wise described complete all as specified and directed. |
| 34 | M&L Painting two coats of synthetic enamel paint over a coat of red oxide including preparation of new steel surfaces of any description n exc10cm in girth not other wise described complete all as specified and directed. |
| 35 | Dismantling boarding of any description, fixed in any position with nails/screwscomplete all as specified and directed |
| 36 | Material and labour for false ceiling with aluminum grid work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick finished with two coats of oil bound distemper over a coat of primer on exposed surfaces all as specified and directed by Engineer-in-Charge. |
| 37 | S&F for PVC ceiling including GI Frame work comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall ueing nylon sleeves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm fixed to wall at approx 900mm centre to centre with gleat and steel expansion fasteners with and including wall section of 0.55mm thickness having kurled web of 50mm and flange of 28mm each with PVC sheet of 1.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre fixed with joining for "J" trim & "T" Section including hanging of 6mm dia GI(Up to 1200mm length) adjusting level finished to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed. |
| 38 | M & L for Providing 15mm thick superior quality chemical pressuretreated edged glued finger jointed rubber wood boarding tongued grooved fixed over rubber wood frame work with rubber wood runner of size 100mm x 50mm fixed at 600mm c/c horizontally (both Direction) by secret nailing with brass screws duly fixed in ceiling including provision of designed rubber wood beading on top and bottom termination of wood boarding and finished with two coats of melamine polish over a coat of honey/natural colour wood filler putty etc, including preparation and applying sand paper and finishing to a glossy/mat finish, suspended below Truss at every 1200mm c/c in both directions using 4mm thick pre-straightened GI wire/GI Rod with adjustable clip complete all as specified and as directed. Make : RUBCO or Equivalent |
| 39 | Supply and fix in repair ECO board 600x600x4mm thick decorative type fixed in existing aluminium grid frame work for false ceiling incl two coats of oil bound distemper over a coat of primer all as specified. |
| 40 | S & F Aluminium anodised (minimum anodisation is50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills,necessary joining cleats, glazing clips, rubber packing,anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight ofvarious Aluminium sections handles and locking arrangementsshall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only). |
| 41 | Supply and fix in repairs aluminium composite panel sheet of 3 to 4mm thick as in cupboards, wall cladding & false ceiling fixed on aluminium/ iron frame work with plastic strips (Double sided sticker) of suitable size of varying thickness of 10mm to 30mm excluding aluminium frame work applying adhesive over aluminium screws. The joints in panels shall be filled with weather proof sealant, the board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and as directed. |
| 42 | Taking down and refixing aluminium composite panel sheet of 3 to 4mm thick as in cupboards, wall cladding & false ceiling fixed on aluminium/ iron frame work and applying adhesive over aluminium screws. The joints in panels shall be filled with weather proof sealant & the board shall be installed using epoxy adhesive complete all as specified and as directed. |
| 43 | S&F in repairs Wire netting of size 12mm with galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified and directed |
| 44 | Supply only 5.5mm thick sheet glass, ordinary quality in squares exc 0.50 sq.m in each panecomplete all as specified and directed |
| 45 | Supply only 150mm aluminium anodised barrel tower bolts of extruded section and fixedcomplete all as specified and directed |
| 46 | Supply only 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed. |
| 47 | Supply only Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified |
| 48 | Supply only 150mm aluminium handles, cast type , anodisedcomplete all as specified and directed |
| 49 | S&F of 150mm Floor door stoper of aluminium alloy and tounge, anodised, with hard drawn steel sring, fixed in doorcomplete all as specified and directed |
| 50 | Dismantling wrought iron or mild steel work of any description not otherwise providedcomplete all as specified and directed |
| 51 | M & L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.con- forming to Fe.290.Gde-E-165complete all as specified and as directed. |
| 52 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E 251 Quality B complete all as specified and directed. |
| 53 | S &F MS work in wind ties for roof including securing boltscomplete all as specified and directed |
| 54 | Dismantling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering all as specified. |
| 55 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including cranking to shape as specified and fixed with self tapping screws complete all as specified and directed. |
| 56 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asin ridges, hips, valley gutter, drip, and straight flashingcomplete all as specified and directed |
| 57 | S&F Plain, Aluminium sheeting 0.56mm thick,Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)complete all as specified and directed |
| 58 | Taking down eaves gutter and rain water pipes (of any size and pattern), incl all fittings and, heads, shoes, bends, swan-necks, etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) |
| 59 | S&F 150mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints, fixed in wallscomplete all as specified and directed |
| 60 | S&F 110mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints, fixed in wallscomplete all as specified and directed |
| 61 | S&F 110mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints, laid in trenches or in floorscomplete all as specified and directed |
| 62 | S&F 75mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints, fixed in wallscomplete all as specified and directed |
| 63 | S&F 75mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints, laid in trenches or in floorscomplete all as specified and directed |
| 64 | S&F PVC (SWR) 150mm dia bend of any radius complete all as specified and directed |
| 65 | S&F PVC (SWR) 110mm dia bend of any radius complete all as specified and directed |
| 66 | S&F PVC (SWR) 110mm dia double T equal or unequal at Junctions of any radius complete all as specified and directed |
| 67 | S&F PVC (SWR) 75mm dia bend of any radius complete all as specified and directed |
| 68 | S&F PVC (SWR) 75mm dia double T equal or unequal at Junctions of any radius complete all as specified and directed |
| 69 | S&F PVC (SWR) 75mm dia cowls complete all as specified and directed |
| 70 | Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 71 | Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 72 | Taking up or down steel tubing 25mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 73 | S&F 15mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed |
| 74 | S&F 20mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed |
| 75 | S&F 25mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed |
| 76 | Supply and fixvitreous china CASCADE type WC single piece-WC with UF Soft close slim seat Cover, hinges, fixing accessories set, dual flush cistern fittings complete of size 655 x 360 x 765 mm , P trap-180mmin approved colour all as specified and directed as per ISI mark. Make : Jaguar cat Part No. LYS-WHT-38851P180UFSM or equivalent . |
| 77 | S&F in Repair wash hand Basin of size 375x475x130mm including all connecting fittings and brackets etc of Jaquar Cat Part No JDS WHT-25907, complete all as specified and as directed by Engineer-in-Charge. |
| 78 | S&F in repairs Vitreous China urinals with spreader hole and fixing accessories of Size 355 x 340 x 535 mm of Jaquar Cat Part No URS-WHT-13261H complete all as specified and directed by Engineer in Charge. |
| 79 | S&F in repairs Curved shaped urinal partition with frosted glass 8mm thk chrome finish of size 450 x 900 mm including all connecting fittings of Jaquar Cat Part No JSE-CHR-810UC450X complete all as specified and directed by Engineer in charge. |
| 80 | S&F in repairs bathroom swivel mirror 630x445mm rectangular shape of Kubix prime range Jaquar Cat Part NoAKP-CHR-35795 complete all as specified and directed. |
| 81 | S & F in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook , complete all as specified and as directed by Engineer-in-Charge. (Make : Jaquar cat No ALD-CHR-573) |
| 82 | S&F in repairs Toilet paper holder,with flap type fixed to wall with chromium plated brass screws. (Make : Jaquar cat No ACN-CHR-1153S or equivalent ) |
| 83 | S&F in repairs two way bib cock, brass CP mixture for mixing hot & cold water complete of Make Jaquar Cat Part No ARI 39041 all as specified and as directed by Engineer-in-Charge |
| 84 | S & F in repairs glass corner shelf, Cat No.1173 of Jaquar or equivalent, complete all as specified and as directed by Engineer-in-Charge. |
| 85 | S&F in repairsAluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.(Make : Jaquar cat No AKP-CHR-35711PS or equivalent ) |
| 86 | S&F in repairs CP towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed by Engineer-in-Charge. (Make : Jaquar cat No ACN-CHR-1121S or equivalent ) |
| 87 | S & F in repairs Angle Cock, 15 mm dia, cast copper alloy with capstan head, Chromium Plated, screwed down high pressure with crutch or butterfly handle for iron pipe etc. complete all as per Jaquar Catalogue No. OPP-CHR-15053PM or its equivalent in Marc or Plumber complete all as specified. |
| 88 | S&F repairs connection pipe15mm size with CP brass Nutsof length 600mm complete all as specified and as directed by Engineer-in-Charge (Make : Jaquar cat No ALD-CHR-801B or equivalent ) |
| 89 | S&F in repair 32mm bore brass CPbottle trap for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed (Make : Jaquar cat No ALD-CHR-769L300x190 or equivalent ) |
| 90 | S & F in repairs 15 mm dia bore single lever basin mixer without popup waste and 450mm long braided hoses complete all as specified and as directed. (Make : Jaquar cat No ARI-CHR-39001B or equivalent ) |
| 91 | S&F in repair 15mm Bib taps chromium, plated cast copper alloy, fancy type with cruttch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and complete all as specified and as directed (Make : Jaquar cat No OPP-CHR-15037PM or equivalent ) |
| 92 | S&F waste coupling 32mm size full thread with 80mm height of Jaquar Cat part No ALD-CHR-705 complete all as specified and directed. |
| 93 | S&F CI floor traps 100mm bore with stainless steel grating including jointing to waste pipe in cement concrete 1:2:4 type B-1 complete all as specified and directed. |
| 94 | S&F in repair Rotational moulded polythylene water storage tanks 1000ltr (Cylinderical vertical with closed top ) hoisted and fixed in position all as per specified in SSR Pt-1 complete all as specified and directed. |
| 95 | S&F in repair Rotational moulded polythylene water storage tanks 500ltr (Cylinderical vertical with closed top ) hoisted and fixed in position all as per specified in SSR Pt-1 complete all as specified and directed. |
| 96 | S&F in repair Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe 20mm bore complete all as specified and directed. |
| 97 | S&F in repair Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe 25mm bore complete all as specified and directed. |
| 98 | M&L for PCC 1:2:4 type B0 (using 12.5mm graded aggregate) as in levelling course for slope correction of existing RCC roof surfaces including cleaning the roof surfaces and removing existing APP based membrane removing all foreign materialsby wire brushes/ brooms/ water jet as specified |
| 99 | M&L in repairs water proofing treatment to RCC roof by priming the plastered surfaces with a coat of cold applied bituminous primer conforming to IS 2488 @ 0.30 kg/sqm and laying APP modified five layer polymeric membrane of minimum wt. 3.50 kg/sqm reinforced with polyster non wovenfabric (weighing not less than 160 gms/sqm) laid by torch application as per the manufacturers instructions with side overlap of 100mm & end overlap of 150mm & tucked into the chases on vertical surfaces to a height of 300mm & finally finished with bituminous aluminium paint @ 0.10 kg/sqm complete all as specified and as directed. |
| 100 | S&F Steel works In tubular/ posts/ trusses/ purlin including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to IS 1161-1797 grade St 240 complete all as specified and directed. |
| 101 | Providing and fixing WPC Fluted exterior & interior louvers including the cost of aluminium section 25 x 25 x 1.2mm, aluminium angle (cleat) 19mm x 19mm x 2mm & Screw locking etc. The WPC fluted panels are interlockable. Louvers should be of size 2400 x 219mm x 25mm with wall thickness of 4mm with exterior coating with warrenty of 10 years all complete including all necessary fixtures and as per design, drawing and site condition complete all as specified and directed and approved by GE |
| 102 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturercomplete all as specified and directed and approved by GE |
| 103 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 104 | Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow sectionwith multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 105 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose) |
| 106 | M&L Post construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene-based solution) at the rate of0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed. |
| 107 | Taking down carefully copper / aluminium point wiring [light, fan, socket or power] complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed. |
| 108 | M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type and Modular Type Pressed Metal Flush Box made out of 2mm thick MS Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth for (a) One Light / Fan Point / Bell Point controlled by One Switch complete all as specified. Note: Rate quoted is also deemed to be including cost of Cutting chases, pinning in Brick Walls, making good to facings where required and pointing in Cement Mortar 1:3 to ends or edges of landings, steps, Cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed. |
| 109 | (b) One 3 pin Socket Outlet 5 Amps on the Same Board with other switches. |
| 110 | (c)One 3 Pin Switch Socket Outlet 5 Amps on Independent Board. |
| 111 | (d) One Light Point controlled by Two Nos. of, Two way Switches. |
| 112 | All as per Serial Item No. 108 above but one 3 Pin Switch Socket Outlet 15 Amps on independent board, with 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor. |
| 113 | S&FModular switch 1 way 6 A, 1 module complete all as specified and directed. |
| 114 | S&FModular switch 1 way 16 A, 1 module complete all as specified and directed. |
| 115 | S&FModular switch 2 way 6 A, 1 module complete all as specified and directed. |
| 116 | S & F Ceiling Rose, Surface Bakelite, 65 X 50 mm, Three Terminals, 230 Volts complete all as specified and as directed. |
| 117 | S&FModular socket outlet, 2/3 pin combined, 6 Amps, 2 module, 230 volts complete all as specified and as directed. |
| 118 | S&Fmodular socket outlet, 2/3 pin combined, 6/15 Amps, 2 module, 230 volts complete all as specified and as directed. |
| 119 | S&Flamp holder (angle type) PVC body with back plate suitable for batten fittings, complete all as specified and as directed. |
| 120 | S&F modular fan step regulator, 230 volts, 120W - 2 module all as specified and directed. Note for item No 03 to 10: Make : Legrand, Havells or eqvt. |
| 121 | M&L for dismantling the burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding with new rotor shaft the ceiling fan of size 1200mm/1400mm sweep motor with super enamelled copper winding wire of suitable SWG including varnishing, baking in oven and reassemling complete all as specified and as directed. |
| 122 | M&L for dismantling the burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the exhaust fan of size upto 250mm sweep motor with super enamelled copper winding wire of suitable SWG including varnishing, baking in oven and reassemling refixing at same/ required location, complete all as specified and as directed. |
| 123 | S & F Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 2000 Lumens output, 5700 K of Cool White, with extruded Aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 124 | S & F Alluminum conciled profile channel of size 35 x 20 mm with diffused cover end caps and mounting clips for LED Strip lights complete all as specified and directed. |
| 125 | S & F LED cove lighting (Each cove lighting length 5 mtr) provided with high output diffuser including high efficiency electronic driver complete with LED Lamp, prewired upto connection block and connecting with three core pvc copper flexible cable from ceiling rose to connector block, including taking down fitting of any wattage complete all as specified and directed. |
| 126 | S&F decorative high wattage LED spot light 30 watt not less than 2250 lumen recessed mounted deep recessed,complete all as specified and as diected. Make : Philips or equivalent |
| 127 | S & F Recess mounted LED Downlight, Round type, Ultra Slim [10mm thick] and of not less than 1200 Lumens, 12 Watt output with Pressure Die Cast Aluminium Housing,with all accessories internally prewired and including connecting up with twin core PVC insulated, including taking down existing light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 128 | S&F 2"x 2" LED recess/ surface mounted fitting 36 Watt, 230V, withintegrated electronic driver high transcluent frosted diffuser, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 129 | S&F 25 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed. |
| 130 | S & F Bell Push, Modular Type, One Module, Single Pole, 6 Amps, 230 Volts complete all as specified and as directed. |
| 131 | Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed. Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc. |
| 132 | All as per Serial Item No. 128 above but for SPN 4 Way complete all as specified and as directed. |
| 133 | S&F in repair MCB single pole and neutral, 240 volts, 40 amps,10KA,230V, B series complete all as specified and as directed. |
| 134 | S&F in repair MCB single pole 240 volts, 5 to 32 amps,10KA,B series ,230v complete all as specified and as directed. |
| 135 | Supply and fix sheet metal enclosures Loadline distribution vertical DB, MCCB as incomer 4 ways 415 volts, with 200 amps rated bus bar, double door, suitable for mounting MCCB 63A TPN as incomer and MCBs as outgoing, Triple pole as incomming complete all as specified and as directed including taking down old MCB DBs complete. |
| 136 | M & L for sub main wiringcomplete with two runs of 4 Sqmm FRLS single core PVC insulated insheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessoriesfixed to wall/ roofs/ floors etc with one run of 4.0 sqmmm FRLSsingle core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre. |
| 137 | All as per Serial Item No. 133 above but 6 sqmm single core cable complete all as specified. |
| 138 | S&F Single pole and neutral enclosure with a two pin and earth plug andsocket complete with one single pole MCB of 20 Amps complete all as specified and as directed |
| 139 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I |
| 140 | Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth in softand loose soil and getting out for laying of pipelines /cables all as specified and directed. |
| 141 | Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils all as specified. |
| 142 | Removing the surplus soil not exceeding 50 M and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 Mtr above the starting point. |
| 143 | Supply and lay HDPE double wall corrugated pipes confirming to IS-14930 Part II for cable protection of size90mm OD and 75mm ID including all acessories such as bend, end caps and couplers etc, complete all as specified and as directed. |
| 144 | Supply & LayXLPEinsulated,heavy duty 1100 volt grade electric armoured LT UG cable with aluminium conductorof size 240 Sqmm 3.5 Core in trenches/along the wall/including making all connections, saddles, spacersincluding scaffolding if any required for saddling the cable in walls of building, complete wih aluminium lugs as required at site and as directed by Engr-in-Charge |
| 145 | All as per item No. 141 here-in-before but cable of size 120 sqmm 3.5 core complete all as specified and directed. |
| 146 | M&L for jointing straight through joint, outdoor type 1100 volts grade, heat shrinkable type suitable for 3.5 core, 240 Sqmm LT XLPE cable and testing after jointing complete all as specified and as directed. |
| 147 | All as per item No. 143 here-in-before but cable of size 120 sqmm 3.5 core complete all as specified and directed. |
| 148 | Taking down old unserviceable LT panel of any discription and size including demolition of PCC foundation and disconnecting all connected accessories such as LT Cables, MCCBs etc complete all as directed. |
| 149 | Supply, installation, testing & commissioning CPRI approved outdoor cubical type LT feeder pillar box suitable for 415V, 3 phase , 4 wire 50 Hz, AC supply system fabricated outer shell from MS sheet 3.15 mm thick and MS angle of size 55 mm x55 mm x6 mm frame front and back openable double door system lockable /openable by keys from both sides totally enclsoed dust, weather & vermin proof having and inner shell 2mm thick made of MS sheet compartmentlisedfor each control gear front openable having louvers and air vent gaskets for natural flow of Air. "U" type gasket shall be used to make the inner shell completely vermin proof and to accomodate incommer/outgoing MCCBs andAluminum busbars of rating 2 times that of controlling MCCB. TPN busbar and extension link shall be insulated with color coded heat shrinkable sleeve and shall be mounted on suitable size SMCinsulator at suitable inteval throghout the length of TPN busbar, supported on SMC insulator, bottom base channel of MS section not less than 100mm x60mm x6mm thick, entire panel shall have a common aluminium earth bar of size 25mm x 5mm at the rear with 2 Nos earth stud, solid connections from main bus bar to switchgears with required size of copper bus bars. All control wiring with minimum 1.5 sqmm PVC insulated multistranded copper conductor cable, cable alleys, cable gland, plates in two halfand general construction confirming to IS. Computer cut self adhesive vinyl danger notice plate having conventional symbol of bone & skull be provided on the busbar chamber and front of outer shell and the degree of protection of outer shell shall be IP-54 and mountedon suitable PCC foundation. A detechable pre drilled gland plate of thickness 3mm should be used at bottom shell.Provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the feeder pillat box safely shall be made. Indicating lamps LED type, 230volts, AC at the incomer of the unit to show three phase availability at the outgoing of incomer including tamper proof digital meter to measure voltage, current with CT & PT (Make- Secure/L&T/HPL/Schneider). An inspection lamp with 5 watt LED bulb shall be fitted on top side of inner shell. The degree of protection for inner shell shall be IP-54 & including carry the following controls :- Note: Contractor shall be submit panel drawing before placing order and approved from GE. |
| 150 | Item No. 146 Contnd...........INCOMING (a)MCCB, adjustable type thermal magnetic release type,4 pole, 415 V, Ics = 100% Icu, Lcu = 36 KA 400 Amps including all fixing accessories with both ends spreader links - 01 No. OUTGOING (a) MCCB, adjustable type thermal magnetic release type,4 pole, 415 V,Ics = 100% Icu, Lcu = 25 KA breaking capacity, rating 250 Amps including all fixing accessories with both ends spreader links - 02 Nos. Make :- Siemens / Legrand / Schneider (b) MCB, TPN -63 Amp -02 Nos and 40 Amp-03 Nos (c)Spare pocket for 01 No MCCB. (d)MF Meter digital type showing V,A,F,Pf, Kw,KWH in built selector switch with CT coils for 3 phs- 01 No (e)Indicator lamp R, Y, B = 03 Sets (Set of three) (f)Complete internal wiring with PVC insulated copper conductor cable of suitable size. |
| 151 | M&L for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, earthing connected to galvanisedstrip 32 x 6mm as earth lead by means of bolts, nuts, washers and check nuts etc incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification. |
| 152 | M&L for Cutting Bittumen Road Hard top at site as requiredfor Laying of Pipe line and making good of disturbed surfaceas per existing top with 20/40mm graded stone aggregate and bitumen layer etcafter repair work complete all as specified and as directed. |
| 153 | S&F in replacement of GI tubing medium grade, 80mm bore ISI marked laid in floor / trenches etc fixing with all GI fittings as required at siteincluding taking out of old pipe complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
