Military Engineer Services-MES has published Tender For Provision Of Guard Room With Attached Bathroom Toilet At Hq 41 Inf Bde And Additional/Alternator To Drain Near Bldg P 27 And Other Sanction Rev And Minor Work Under Ge East Lucknow. Submission Date for this Tender is 19-06-2024. Building Work Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Jun-2024 | Revised BOQ | BOQ | 12-06-2024 |
| 2 | 12-Jun-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-06-2024 |
| FileName | File Description | File Size |
| 0d01beea-ca3a-48fd-aee9-e54c12b46351.html | Tender Notice | 0 KB |
| BOQ_733397.xls | Tender Document | 0 KB |
| Tender06.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30 cm deep averaging 15 cm deep and getting out in soft/ loose soil. complete all as specified and directed. |
| 2 | Excavation in trenches not exc 1.5 mtr wide & not exc. 1.5mtr depth for foundation, manholes etc and getting out soft/loose soil complete all as specified and directed. |
| 3 | M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation or mass concrete etc complete all as specified and directed. |
| 4 | M&L for RCC M -25 (20mm graded stone aggregate) design mix as in foundation, including raft footings, foundation beams, plinth beams bases for columns etc complete all as specified and as directed. |
| 5 | M&L for RCC M-25 (20mm graded stone aggregate) design mix as beams etc. complete all as specified and directed. |
| 6 | M&L for RCC M-25 (20mm graded stone aggregate) design mix as roof slab. complete all as specified and directed. |
| 7 | M&L for RCC M-25 (20mm graded stone aggregate) design mix as chajja. complete all as specified and directed. |
| 8 | M&L for RCC M-25 (20mm graded stone aggregate) design mix as columns. complete all as specified and directed. |
| 9 | M&L forbrick work with fly ash bricks, straight or curved on plan exc 6mtr mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed. |
| 10 | M&L for brick work with fly ash bricks,straight or curved on plan to any radius in a half brick thick wall in CM 1:4 mortar complete all as specified and directed. |
| 11 | M&L for treating the soil under plinth protection at the rate of 5 litre of emulsion per square metre of surface areacomplete all as specified and directed. |
| 12 | Treating the back fill in contact with foundation at the rate of 7.50 litre of emulsion per square metre of vertical surface (area of sub structure in contact with back fill to be measured)complete all as specified and directed. |
| 13 | Treating the top surface of filled earth rate of5litre of emulsion per square metre of surface areacomplete all as specified and directed. |
| 14 | M&L for TMT 6mm to 8mm dia cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed. |
| 15 | M&L for TMT 10mm dia and over cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed. |
| 16 | M&L for TMT 6mm dia and over cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed. |
| 17 | M&L for Formwork to sides of footings of concrete foundation with rough finished surfaces of concrete complete all as specified and directed. |
| 18 | M&L for Formwork to sides of columns with rough finished surfaces of concrete complete all as specified and directed. |
| 19 | M&L for Formwork to sides and soffits of lintels & beams including supports overhangs etc with rough finished surfaces of concrete. complete all as specified and directed. |
| 20 | M&L for Fromwork to roof slab with projection including edges with rough finished surfaces of concrete complete all as specified and directed. |
| 21 | M&L for Fromwork to chajjas, troughs and similar items including edges for rough finished surfaces of concrete complete all as specified and directed. |
| 22 | M&L for 15mm thick rendering in (CM) 1:4 on fair surfaces of brick walls finished even and smooth without using extra cement. complete all as specified and directed. Note -WPC paid seperately) |
| 23 | M&L for 15mm thick rendering in cm 1:6 on other than fair surfaces of brick walls finished even and smooth w/o using extra cementcomplete all as specified and directed. |
| 24 | M&L for earth filling,spreading, leveling & compecting n exc. 30 cm thick Layer, watering, ramming/rolling and finishing to required size, shape,etc.n exc. 1.5m high from base. complete all as specified and directed. |
| 25 | Returning filling in cluding spreading levelling watering and well ramming in layers not exc 25cm in hard dense soil. complete all as specified and directed. |
| 26 | Removing excavated material not exc 50mtrs and depositing where directed at level not exc 1.5 mtrs above the starting pointcomplete all as specified and directed.. |
| 27 | Removing excavated material not exc 50mtrs and depositing where directed at level exc 1.5 KM but not exc 5.00 KMcomplete all as specified and directed.. |
| 28 | M&L for preparation of new plaster surfaces of wall and applying two coats of oil bound distemper ovr one coat of wall care puty 1mm thick on walls with alkali resistant primercomplete all as specified and directed. |
| 29 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of primercomplete all as specified and directed. |
| 30 | M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed. |
| 31 | M&L for 100mm thick PCC type D-2 1:4:8 (40mm graded stone aggregate) for sub base. complete all as specified and directed. |
| 32 | M&L forPCC 25mm thick 1:2:4 of type B0 using 12.5mm graded stone aggregate as in base of floors complete all as specified and as directed. |
| 33 | M&L for Non skid coloured ceramic tiles 7to 8 mm thick (square/Rectanglar) area of each tiles exc .18 Sqm but not exc 0.38 Sqm in floor includingscreed bed 15mm thick or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and directed. |
| 34 | M&L for glazed coloured ceramic tiles in vertical surface 300x300mm x 7mm thick/350x450mm x 7mm thick, laid over 15 mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and directed. |
| 35 | M&L for double chargedvitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceedubg 0.18 Sqm but not exceeding 0.36 Sqm , in floors etc set in on 15 mm thick in net cement screed (1:4) slurry and pointed incl white or colour cement to match complete all as specified and directed. |
| 36 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate finished even and smooth witthout using extra cement as in plinth protection/pathcomplete all as specified and directed. |
| 37 | S&F anodised aluminium ventilator fixed type weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and directed. |
| 38 | S&F 3mm thick sheet glass ordinary quality frosted one on side and glazing with oil putty/beads in square not exc 0.5 Sqm in each panecomplete all as specified and directed. |
| 39 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawingcomplete all as specified and directed. |
| 40 | S&F factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. complete all as specified and directed. |
| 41 | S&F butt hinges 100mm, medium weight, cold rolled mild steel, and fixedcomplete all as specified and directed. |
| 42 | S&F aluminium, anodised, barrel tower bolts 150mm of extruded section and fixedcomplete all as specified and directed. |
| 43 | S&F aluminium handles 150mm, cast type, anodisedcomplete all as specified and directed. |
| 44 | S&F for aluminium alloy, anodised, sliding door bolt (bolt not less than 10mm dia, 150mm size) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section or cast slumininum alloy and fixed complete all as specified and directed. |
| 45 | S&F pressed steel frames of size 125X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etccomplete all as specified and directed. |
| 46 | M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as for filling in door frames etc complete all as specified and directed. |
| 47 | S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides. complete all as specified and directed. |
| 48 | S&F 35mm thick 2nd class hard wood glazed skelton shutters open rebated and prepaired to receive glass guage etc (w/O sash bars) edges of framing plain chambered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part-I section-8 clause 8.24 (a) S&F to chowkhat. complete all as specified and directed. |
| 49 | S&F stainless steel butt hinges of size 100mm medium weight steel ISI markedcomplete all as specified and directed. |
| 50 | S&F 300 mm long aluminium alloy, anodised sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding boltscomplete all as specified and directed. |
| 51 | S&F 200mm aluminiumanodized barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 52 | S&F 150mm size aluminium alloy handles, febricated type extruded section, ISI markedcomplete all as specified and directed. |
| 53 | S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller platecomplete all as specified and directed. |
| 54 | S&F powder coatedalumium glazed window shutter sliding type using 1.30 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rils 100x44mm Make jindal/Hindalco including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodisedaluminium fittings complete and glazing shall be done by using 5mm thick plain sheet glass Make- Modi guard/saint gobin) and stainless steel wire cloth 0.63 mm nominal dia of wire and averagewidth of aperture 1.40 mm complete all as specified and directed. |
| 55 | Anodised aluminium Grill (anodised tranparent of dyed to required shade according to IS1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the exiting window frame with CP brass/ stainless steel screws @200 mm centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Enginer-in-charge. complete all as specified and directed. |
| 56 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer surfacescomplete all as specified and directed. |
| 57 | M&L forpreparation of new steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer/ zinc chrome primercomplete all as specified and directed. |
| 58 | S&F drapery rods, coloured, standard quality, stainles steel not less than 25mm dia with heads both ends and middle support rings etccomplete all as specified and directed. |
| 59 | S&F aluminium peg set consisting of 6 pegs on aluminium flat of standard section. complete all as specified and directed. |
| 60 | S&F GI tubing of size 20 mm dia, medium grade, laid in floors/wallscomplete all as specified and directed. |
| 61 | S & F GI tubing of size 15mm dia, medium grade, laid in floors/wallscomplete all as specified and directed. |
| 62 | S&Fin repairs vitreous china wash hand basin, white, flat back of sizeWHB 600 x 480mm with & including a pair of cast iron brackets embeddd in PCC 1:3:6 type C1 blocks of size 10x7.5xx15cm, 32mm dia PVC waste Pipe and 32mm bore chromium plated brass waster fitting with long screwed shanks and fly nuts flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug)complete all as specified and directed. |
| 63 | S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, "P" or "S" trap, including connection to trap and flushing pipe, antisyphonage pipe etcincluding provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed. |
| 64 | S&F PVC low level flushing cistern of 10 ltr capacity fixed in repair including siphon float valve and rubber cone etc complete all as specified and directed. |
| 65 | S&F PVC connection 450mm long with brass nuts and PVC washercomplete all as specified and directed. |
| 66 | S&F Vitreous china Squatting pan, indian pattern, size 580 x 440mm white, with integral foot rest in cluding "P" or "S" trap complete,fixed in repairscomplete all as specified and directed. |
| 67 | S&F for pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and directed. |
| 68 | S&F bib taps 15 mm chromium plated fancy type, cast copper alloy screwed pressure,screwed both ends for iron pipe for unions and fixedcomplete all as specified and directed. |
| 69 | S&F 600 x 450mm x 6mm bevelled edge mirror ofselected quality class mounted on 6mm thick AC building board or commercial plywood with PVC moulding and fixed to wooden plugs with CP brass screw & cup washers. complete all as specified and directed. |
| 70 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed. |
| 71 | S&F for 15 mm stop valves/angle volve, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixedcomplete all as specified and directed. |
| 72 | S&F 75mm dia PVC floor trap with grating fixed in position complete all as specified and directed. |
| 73 | M&L for PVC (SWR) pipes 110mm dia laid in floor or in trenches, single socketed with rubber ring joints complete all as directed and as specified |
| 74 | M&L for PVC (SWR) pipes 110mm dia bends with rubber ring jointscomplete all as specified and directed. |
| 75 | M&L for PVC (SWR) pipes 75 mm dia laid in floor or in trenches, single socketed with rubber ring jointscomplete all as specified and directed. |
| 76 | M&L for PVC (SWR) pipes 75mm dia bends with rubber ring jointscomplete all as specified and directed. |
| 77 | Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling.complete all as specified and directed. |
| 78 | S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed. |
| 79 | M&L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) on roof slabcomplete all as specified and directed. |
| 80 | M & L for rendering 10mm thick on fair faces ofconcrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound finished even and smooth without using extra cement . (Liquid water proofing compound to be measured paid separately) complete all as specified and directed. |
| 81 | Supply only Liquid water proofing compound complete all as spesified and directed. |
| 82 | M & L for Waterproof coating Providing and applying waterproofing treatment to sound, moisture free concrete surface using Nitoproof 600PF manufactured by Fosroc Chemicals India Pvt Ltd. Nitoproof 600PF shall be liquid applied single component pitch free polyurethane coating capable of bridging substrate cracks up to 2 mm. It shall be applied in two coats at coverage rate of 2kg/sqm. The membrane formed shall confirm to following minimum properties: 1) Elongation : >400% as per ASTM D412 2) Tensile Strength : 2.5 N/mm2 as per ASTM D 412 3) Adhesion in-peel test : >50 N as per ASTM C- 836 4) Recovery from 350% elongation : 95% as per ASTM D 412 5) Water Vapour Transmission 2.3mm film: 0.6 g/m2/hr 6) Initial Hardness Shore A : min 60 as per ASTM D 2240 7) Root resistant : protection screed required No geotextile recommended in between layers as it decreases elongation property of material Membrane Termination shall be done 300 mm above floor level. System includes supply, Surface preparation (crack treatment, coving etc), application and termination of coating all complete as per the fosroc methodology. complete all as specified and directed. |
| 83 | S&F M.S framed work such as grills grating etc with ends of bars sholdered and /or riveted into spikes framed guard bars/railingcomplete all as specified and directed. |
| 84 | S&F 150mm internal dia, Salt glazed & stoneware drain pipe grade ‘A’,laid in trenches and jointed with cement jointscomplete all as specified and directed. |
| 85 | M&L concrete bed to drain pipes of 150 mm dia incl packing under and haunching against the sides of pipes with concrete, after they are laid in cement concrete 1:3:6 typer C2 and testing including necessary form work. complete all as specified and directed. |
| 86 | M&L for PCC 1:3:6 type C-2 (suing 40 mm graded stone aggregate in foundation filling of manholes/post holes block/surface channel and draincomplete all as specified and directed. |
| 87 | M&L for PCC 1:2:4 type ‘B1’ (using 20mm graded stone aggregate) in coping, benching of manholesetc and including necessary formworkcomplete all as specified and directed. |
| 88 | M&L for RCC 1:2:4 type ‘B1’ (using 20mm graded stone aggregate) in precast manhole cover and cover slab for septic tanks and including necessary forms and moulds etc and set in cement mortar 1:6 and including demolition of old slabcomplete all as specified and directed. |
| 89 | Soakage well ells exc, in hard soil, foundation in PCC 1:3:6 wells of honey combed bricks work in CM ,RCC Cover slab Filling with bricks bats, complete of size 1.80M dia X 3.00M deep complete all as specified and directed. |
| 90 | Material and Labourfor point wiring complete with 1.5 sqmm (nominal area) FRLS gradePVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduitwith accessories including 1.5 sqmmFRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall complete all as specified and directed. |
| 91 | All as per Item No 90 hereinbefore but forOne 5 A socket outlet on independent Boardcomplete all as specified and directed. |
| 92 | All as per Item No 90 hereinbefore but forOne 5 A socket outlet onsameBoardcomplete all as specified and directed. |
| 93 | All as per Item No 90hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmmFRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductorcomplete all as specified and directed. |
| 94 | Supply and fix frame plate with match cover one moduleplate complete all as specified and as directed. |
| 95 | All as per item No.94 above buttwo moduleplate complete all as specified and as directed. |
| 96 | All as per item No.94 above but three module complete all as specified and as directed. |
| 97 | All as per item No.94 above but six module complete all as specified and as directed. |
| 98 | All as per item No.94 above but Eight module complete all as specified and as directed. |
| 99 | All as per item No.94 above but twelve module complete all as specified and as directed. |
| 100 | Supply and fix terminal box suitable one modular plat of size 75X75x50 mm including cutting, grooving and plastering etc.complete all as specified and as directed. |
| 101 | Supply and fix terminal box suitable two modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed. |
| 102 | All as item No 101 above but three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed. |
| 103 | All as item No 101 above but six modular plate of size 210X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed. |
| 104 | All as item No 101. above but Eight modular plate of size 210X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed. |
| 105 | All as item No 101 above but twelve modular plate of including cutting, grooving and plastering etc. complete all as specified and as directed. |
| 106 | Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one modulecomplete all as specified and directed. |
| 107 | Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module all as specified.Make: Legrand/Anchor Roma/Havells |
| 108 | Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified.Make: Legrand/Anchor Roma/Havells |
| 109 | Supply and fix Modular socket 6A/16A2/3 pin combined 230V AC 50 HZ SP two module all as specified.Make: Legrand/Anchor Roma/Havells |
| 110 | Supply and fix Modular Regulator 230V AC 50 HZ SP two module all as specified.Make: Legrand/Anchor Roma/Havells |
| 111 | Supply and fixin repair of MCB DB SPN 8 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works all as specified and directed. |
| 112 | Supply and fix MCB SP 230V, 6-32 Ampscapacity all as specified and directed. |
| 113 | Supply and fix MCB SPN 230V, 32 to 63 Ampcapacity all as specified and directed. |
| 114 | S&F Ceiling rose PVC polycarbonatecomplete all as specified and directed. |
| 115 | Lamp Holder(ISI Marked) PVC/Polycarbonate type with back plate incl 9 Watt LED Bulb suitable for batten fittings,complete all as specified and directed. |
| 116 | S&F in replacement LED building security light 36W with bracket IP 65 including one number MS clamps made of 25X3 mm flat iron with bracket of GI pipe light grade 25mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting, connecting with three core copper flexible wire 23/0.0076 complete all as specified and directed |
| 117 | S&F LED tube light fittings 20/22 W extruded aluminium housing abs end cap PC diffuser voltage protection 140v-270v cct-6500k, surge protection 2.5 kv cri>80, 100lm/w lumen 2400 complete all as specified and directed. |
| 118 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and directed. |
| 119 | Supply and fixing Exhaust fan 300 mm sweep steel body fix existing wallcomplete all as specified and directed. |
| 120 | Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth and matching wall color. complete all as specified and directed. |
| 121 | Material and Labour for Submain wiring with 2 runs of FRLSgradePVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & includingPVC Conduit pipe 20 mm dia with all fittingscomplete all as specified and directed. |
| 122 | Material and Labour for Submain wiring with 2 runs of FRLS gradePVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and includingPVC Conduit pipe 20 mm dia with all fittingscomplete all as specified and directed. |
| 123 | Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20 amps SPN MCB allcomplete all as specified and directed. |
| 124 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete complete all as specified & directed. |
| 125 | Demolition of plain Concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed. |
| 126 | Demolition of reinforcement concrete any descriptionand position work complete all as specified and as directed. |
| 127 | M&L for brick workusing fly ash brick conforming to IS-12894 2002, non modular, class designation 7.5, straight or curvedon plan, exc.6.0 m mean radius in CM (1:6) complete all as specified and directed. |
| 128 | M&L for extrafor forming fair finished drain or channel 45cm inner girth in cementconcrete, usingextra cement, includingforms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 129 | M&L for Providing perforated precast reinforced cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregat) drain covere factory made as per specification of manufacturer and set in cm 1:6 mortar in manhole cover,drain cover etc complete all all as specified and directed. |
| 130 | M&L for RCC drain hume pipe450mm dia NP3 complete all as specified and directed. |
| 131 | S&F mild steel rolled sections as in framing for drain covers, cladding, glazing and the like fixed with angle cleats and connecting plates(Fe 410 -W(Gde-E- 250)quality -A etc. complete all as specified & as directed. |
| 132 | M&L for preparation of newly plastered surfaces of wall and applying 2-3mm thick wall care putty includingtwo coat of weather exterior emulsion (Apex) by using roller only of approved shade/tint complete all as specified and as directed. |
| 133 | S&F mild steel framed work using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. complete all as specified & as directed. |
| 134 | S&F coloured pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strngth of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screwsincluding necessary washers etc all as per manufactures instruction. complete all as specified & directed. |
| 135 | M&L Cutting opening in cement concrete walls (any descript-ion) for door, window and other openings (with or without reveals)or enlarging existing openings,including trimming surfaces to receive rendering, etcgroutingwith cement and sand slurry 1;3 complete all as specified and directed. |
| 136 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises,complete all as specified and directed. |
| 137 | S&F Non Skid finish ceramic coloured tiles 7 to 8 mm thick joint free (area of each tile exc. 0.06 but n.exc 0.11 Sqm) set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:4as approved. complete all as specified & directed. |
| 138 | S&F glazed coloured ceramictiles300X600x7 to 8 mm thick,set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 10 mm thick renderingin CM 1:4 as in vertical surfaces as approved. complete all as specified & directed. |
| 139 | Dismantling boarding any description, fixed in any position with nails. complete all as specified & directed. |
| 140 | M&Lfor 18 mm thick plywood grade BWR type BB, fixed withscrew totimber frame work block board grade 2 quality interior grade having both sides commercial faces fixed with screws to timber frame work, complete all as specified & directed. |
| 141 | M&Lfor decorative laminate 0.90mm thickness type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructionscomplete all as specified and directed. |
| 142 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws. complete all as specified & directed. |
| 143 | S&F magnet door shutter catcher weight of 100-200gm with plastic/steel body etc complete all as specified & directed. |
| 144 | S&F in repair CP Bibtap fancy type 15mm dia long body complete all as specified & directed. |
| 145 | S&F in repair soap dish CP fixed with and including chromium plated brass screws complete all as specified and as directed. |
| 146 | S&F vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, wall mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed. |
| 147 | S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including32 mm dia PVC flush pipeconnected to water closet with inlet, ball valve, float and handle complete all as specified & directed. |
| 148 | S&F in repairs bevelled edge mirror of selected quality glass mounted on 6mm thick ac building board or commercial ply wood and fixed to stainless steel 150mm long spacer/wooden plugs with chromium platated brass screw and cup washers complete all as specified & directed. |
| 149 | S&F in repairsPVC cabinet with mirror and door of size 560X410mmcomplete all as specified & directed. |
| 150 | S&F in repairsflush pipe of polyethyline of lower high density pvc 32mm dia for WHB, all as approved. complete all as specified & directed. |
| 151 | S&F in repairs brass chromium plated wall mixer for mixing hot & cold water in 3-in-1 with telephonic hand shower and 1.50m long flexible lead & screwed down for iron pipe of 15mm borecomplete all as specified and directed. |
| 152 | S&F in repairs chromium plated single hole & leaver basin mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved qualitycomplete all as specified & directed. |
| 153 | S&F in repairs chromium plated brass angle valve 15mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup complete all as specified & directed. |
| 154 | S&F in repairs CP brass toilet paper holder fixed to wall with chromium plated brass screws of approved quality complete all as specified & directed. |
| 155 | S&F in repair health faucet for EWC CP hand hold with flexible pipe complete set complete all as specified & directed. |
| 156 | S&Fin repairs15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner complete all as specified & directed. |
| 157 | S&F in repairs glass corner shelf assembly consisting of 5.5mm thick sheet glass 250X250mm size fixedwith chromium plated brackets as in repairs complete all as specified & directed. |
| 158 | S&F in repairCP ShowerRosewith arms15mm dia complete all as specified and as directed. |
| 159 | S&F in repairCP grating jali 100/75mm dia complete all as specified and as directed. |
| 160 | M&L for preparation ofold decorated plastered surfaces of walls and applying two coat of oil emulsion distemper (OBD) by using roller approved shade/tint complete all as specified and directed. |
| 161 | S&F in repairs vitreous china wash hand basin,table top white, flat back of size 480x480mm with & including a pair of , 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end (excluding tap, waste chain & plug), complete all as specified & directed. |
| 162 | M&L in repairs for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down of existing one complete all as specified & directed. |
| 163 | Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc., laid, bedded and pointed,in any mortar complete all as specified & directed. |
| 164 | M&Lfor 18-20mm thick Granite (of any type) work(table rubbed and polished) in steps jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified & directed. |
| 165 | Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including irom mongrey andcutting holes for hold fasts & making good complete all as specified & directed. |
| 166 | S&F 90x45mm single rebated factory made 100% solid WPC (Wood Polymer Composit) panasle door frame made from 100% lead free (singal& extruded process) material with density not less than 780 Kg/Cumcomplete all as specified and directed. |
| 167 | S&F Solid PVC Flush Door shutter 28mm thick, made from Co-Extruded three layer rigid PVC foam sheet (Single Extruded) with density not less than 600 Kg/Cum outer layer (0.8-1mm) thick should be of rigid PVC with density of not less than 1400 Kg/Cum manufactured by an ISO 9001-2015 certified company, Both of surface to be laminated with 0.12mm thick PVC film with suitable adhesive. Door should be Water Proof, Termite Proof, Fire Retradant & having good screw holding capacity. complete all as specified and directed. |
| 168 | S&F of Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and directed. |
| 169 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and averagewidth of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified & directed. |
| 170 | S&F of sheet glass 4mm thick,ordinary quality and glazing with aluminium snap beading in squares n.exc 0.5 sq. m in each pane complete all as specified & directed. |
| 171 | S&F powder coated aluminium grill (opening of gril not more than 100x100mm) fixed to windows or ventilators with anodised aluminium U channel 25x12mm size complete all as specified and as directed. |
| 172 | S&F butt hinges 100mm size extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type B-21 complete all as specified & directed. |
| 173 | Taking down cement plaster on brick walls / ceiling incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.. |
| 174 | M&L for rendering 15mm thick on fair faces of work or concrete surface in CM 1:6 and finishing the surface even and smooth without using extra cement all as specified and directed. |
| 175 | M&L for preparation of new plastered surface of wall including wall care putty 2-3mm thick and applying two coats of oil emulsion distemper (OBD) over a coat of primer complete all as specified and directed. |
| 176 | M&L for Complete removal of exiting treatment and applying two coatsof oil bound distemper over one coat of wall care putty complete all as specified and directed. |
| 177 | Preparing old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and directed. |
| 178 | S&Fcurtain rods, standrad quality,bore not less than 25mm dia and thicknesswith 1.8 mm with head/ bulbs at both ends and middle support if necessary, rings etc. complete all as specified & directed. |
| 179 | Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed. |
| 180 | S&F 12 mm thick toughened glass door shutterwith blackvisible film in single leaf with necessary etching including all fittings and pivot at top and floor door spring at bottom,fancy type glass handle of size not less than 300 mm on both sides of shutter with suitable locking arrangement and all necessary fitting complete all as specified and directed. |
| 181 | S&F 12 mm thick toughned glass with black visible film as fixed opening, partitions and similar work including cutting to shape, drilling holes and necessary SS fittings etc complete all as specified and directed. |
| 182 | S&F Solid PVC Wall Linning consisting of 5mm thick Plain single side prelamPVC sheet inclusive of solvent cement and fixing at site on PVC frame and pvc L-beadingat top of wall lining,opening eadge of door&windows as per specifications and drawing complete all as specified and as directed. |
| 183 | S&F 5mm thick PVC sheet fillets of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed. |
| 184 | S&F vitrifield ceramic tiles light/dark shade 10mm thick (Square/rectangular) polished area of each tileexc 0.42 Sqm but n.exc 1.00 Sqmin floor etc laid over 20mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed. |
| 185 | S&F of vitrifield ceramic tiles light/dark shade 10mm thick (Square/rectangular) polished area of each tile exc 0.42 Sqm but n.exc 1.00 Sqm as in skirting etc laid over 10mm thick screed bed in CM (1:3) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed. |
| 186 | S&F 12mm thick plain Gypsum board false ceilingwith GIframe work including all necessary drilling , cutting to fix electrical items as under:- (a) GI sheet channel 30x25x20mm of 24 Gauge fixed with rawl plug and screws 450mm centre to center alongwith perimeter of walls. (b) GI sheet channel made to shape 50x40x40mm of 24 gauge placed @ 600mm centre to centre from perimeter of wall except long wall (in one span) (c) GI sheet intermediate runners of size 45x10x10mm of 24 gauge fixed @ 1200mm centre to centre leaving frame of one side wall (in other span) (d) GI sheet 25mm wide & 20mm gauge suspenders fixed with steel fasteners to roof, ceiling @ 1200mm centre to centre incl plugging in RCC slab. (e) Fixing of 12mm thick gypsum boards, filling joints with P.O.P and finishing complete with two coats of oil of plastic emulsion paint over one coat of primer on ceiling. complete all as specified and as directed. |
| 187 | S&F false ceiling with 4mm thick E-board Everest make white prepainted designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section runner made of 0.33mm GI sheet and angle made of 0.45mm, GI sheet suspected with 4mm dia GI wire complete all as specified.Note.All exposed surface of grid work shall be powder coated white.complete all as specified and as directed. |
| 188 | Removal of dismantled material exc 500mtrs and n.exc 1km depositing where directed at level not exc 1.5 mtrs above trhe starting pointcomplete all as specified and as directed. |
| 189 | Surface dressing not bexc 15cm deep any type of soil.complete all as specified and directed. |
| 190 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in hard/dence of soil complete all as specified and directed. |
| 191 | M&L Cement concrete1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass-concrete complete all as specified and directed. |
| 192 | S&F mild steel joist, channel, angle, or tee sections as in posts fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W (Gde E-250) complete all as specified and directed. |
| 193 | S&F for mild steel as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of FE410-W (Gde E-250) complete all as specified and directed. |
| 194 | S&F exterior tiles of superior quility300x300/400x400x10-12MM thick of approved size/design/shade set and jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in cm 1:4 complete all as specified and directed. |
| 195 | S&F coloured pre-paintedTiles profilegalvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strngth of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screwsincluding necessary washers etc all as per manufactures instruction. complete all as specified & directed. |
| 196 | S&F coloured pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick having tensile strngth of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screwsincluding necessary washers etc all as per manufactures instruction. complete all as specified & directed. |
| 197 | S&F 110mmPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall 110mm bore , complete incl taking down old pipe etccomplete all as specified and directed. |
| 198 | S&F 110mm bore PVC (SWR) bends, any radius complete all as specified & directed. |
| 199 | S&F of made 12mm thick solid WPC designed board with CNC cuttings white color as in view cutter fixed with stapled screw & accessories fittings etc complete all as specified and directed. |
| 200 | S&F Stainless steel dull finishhandles extrude type 100mm size complete all as specified & directed. |
| 201 | S&F modularbell push single pole 1 module6 Amp, 240 volt complete all as specified and as directed. |
| 202 | S&fcall bell , ding dong /musicalAC single phase 230 volts complete all as specified and as directed. |
| 203 | Supply and fix PVC pipe25 mm dia for protection of cables complete all as specified and as directed. by Eng-in-Charge |
| 204 | Supply and fix PVC pipe80 mm dia for protection of cables complete all as specified and as directed.by Eng-in-Charge |
| 205 | Supply and fix TV Socket 1 Module Modular complete all as specified and as directed. by Eng-in-Charge |
| 206 | Supply and fix Telephone socket 1 Module Modula complete all as specified and as directed. by Eng-in-Charge. |
| 207 | Supply and fixing recess mounting LED light fitting 2"x2" luminaire architectural recessed luminaire with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR<=19. The luminaire should have a color consistency SDCM< 5, CRI > 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 4200 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor >0.95, THD <10%, 4KV internal surge protection and the Ripple factor should be <5% to minimise the Flicker and Stroboscopic effect and Fixture should have an operating voltage range of 140-270VAC incl complete all as specified and as directed.by engineer in charge. |
| 208 | S&FEngagement light with set of three light( Red,yellow, and green light) with insulated body with back plate suitable for batten fittings as directedincl 1.5 sqmm 3 core cable for connection complete all as specified and as directed. |
| 209 | Supply and fixing Wall fan complete with all accessories, 230 V, 400 mm sweep.complete all as specified & directed. |
| 210 | S&F in replacement decorative wall mounted fancy light fitting made up of brass rubi lamp brand double handed item code 119598240 including of thred type bulb of 9-15 wattscovered by glasscomplete all as specified & directed. |
| 211 | S&F energy saving ceiling fan of 1200 mm sweep of 330-370 RPM, 220-240 volts, AC, 50 Hz, ISI marked with five star rating including hanging with the help of fan hook, down rod up to 04 feet and connecting up with provn of 3 core copper flexible cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed.Make : Havells, Model: ES-50 Premium or Usha, Model: Energia Star ISI or Crompton Greaves, Model: Empower 50 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
