Purvanchal Vidyut Vitaran Nigam Limited has published Tender For Maintenance And Repair Of Office Building Of Edd Handia, District- Prayagraj. Submission Date for this Tender is 21-06-2024. Building Repair Tenders in prayagraj Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Jun-2024 | Date Extension | Date | 21-06-2024 |
| FileName | File Description | File Size |
| 09575c41-7ecd-4374-9d2b-e9d3b8525e15.html | Tender Notice | 0 KB |
| 9handiya.pdf | Tender Document | 0 KB |
| BOQ_1598214.xls | Tender Document | 0 KB |
| TD2024-25.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11) |
| 2 | S/mixing approved water proofing compoun(CICO,DR FIXIT etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer(CSI NO.11.15) |
| 3 | S/laying chicken mesh of (20 mm.)hexagonal heavy quality over roofs of joints of roof as per direction of the Engineer - in - charge.(CSI No. 20.21) |
| 4 | Cement concrete with 2cm gauge approved hard stone ballast,coarse sand and cement in proportion of 3:1.5:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work(CSI No. 5.21) |
| 5 | 6 mm. thick plaster with 1:3 cement & coarse sand includinglabour, materials & T&P etc. required for proper completion ofthe work. (CSI No. 11.17) |
| 6 | 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumtion 0.044 bag/Sq.m.) (CSI No. 11.20) |
| 7 | First class brick (class-150) work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in super structure a including supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01+6.07+6.08) |
| 8 | RCC work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P (CSI No. 5.24) |
| 9 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) (CSI No. 9.03) |
| 10 | 12 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand (1:3), minimum thickness not to be less then 10 mm including supply of all materiallabour and T&P etc for proper completion of work.(CSI No. 11.06) |
| 11 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(CSI No. 11.09) |
| 12 | 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07) |
| 13 | Supply and Laying 6 mm thickglazed tiles of size 450x300 mm in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and T&P etc. completion required for proper completion of the work.(CSI No. 12.12) |
| 14 | Supply and Laying 8 mm thickglazed floor tiles of Somany, Johnson or equivalent make, of size 300x300 mm, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and T&P etc. completion required for proper completion of the work.(CSI No. 12.11) |
| 15 | Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.54+8.58) |
| 16 | Renewing panes of 4.0 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work. (CSI No. 20.04b) |
| 17 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01) |
| 18 | Concrete with 4cm gaugeBrick ballast, coarse sand (F.M. 1.8 to 2.5) & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No. 5.01) |
| 19 | First class brick work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01) |
| 20 | Supply and laying of 80 mm thick I shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge but excluding G.S.T. which shall be paid extra as per rules. (CSI No.12.23) |
| 21 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01) |
| 22 | Supply and fixing Zinc- Aluminium coated sheet(thickness not less than .45mm) roofing. Fixed in position with J or U bolts 10 mm . Dia with G.I.Limpet& bitumen washers including supply off all materials,labour , wastege and T& Petc. Required for proper comletion of the work. (NSI) |
| 23 | Earth filling under floors and/or corporation area including cost of earth obtainedwith in 8 km distance outside corporation area including all taxes (if any) andits carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (CSI No. 4.10) |
| 24 | Scrapping old white or colour wash or distemper including disposal of refuseas directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.12) |
| 25 | Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20) |
| 26 | Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.(CSI No.13.21) |
| 27 | Same as above item 26 above but for every coat of additional APEX or equivalent brand weather coat paint . (CSI No. 13.23+13.24) |
| 28 | Painting two coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.25+13.26) |
| 29 | Same as above in item 28 but one coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint on previously painted surface. (CSI No. 13.26+13.27) |
| 30 | Painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint "Luxol" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.(CSI No. 13.01+13.02) |
| 31 | Same as above item 30 but for every coat on previously paintedold wood or iron work including its sand papering,rubbing andcleaning as required, for proper completion of work. (CSI No. 13.03) |
| 32 | Providing and fixing of 110 mm dia PVC pipe 4 Kg/ Sq.cm for with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.18) |
| 33 | Providing and fixing 15 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.19) |
| 34 | Providing and fixing 25 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.21) |
| 35 | Providing & fixing half turn 25mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05c) |
| 36 | Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work. (CSI No. 26.12) |
| 37 | Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16a) |
| 38 | Providing and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.08) |
| 39 | Supply and fixing 100 mm dia PVC Nahani Trap India make of heavy approved quality complete with grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21b) |
| 40 | Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trapincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.01) |
| 41 | Providing and fixing 10 littres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12) |
| 42 | Providing and fixing 100 mm dia PVC "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.24) |
| 43 | Wiring point for light with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface with 1 sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit,piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed, including maching colour wash.(UPPWD ELE SCH 2018 ITEM NO 121C ) |
| 44 | Wiring point for fan/fresh air fan(light duty exhaust fan) with 1.5 sq. mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface with 1 sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit,piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed, including maching colour wash.(UPPWD ELE SCH 2018 ITEM NO 123C) |
| 45 | Wiring point for plug with 1.5sq. mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface with 1 sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit,piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed, including maching colour wash.(UPPWD ELE SCH 2018 ITEM NO 124C) |
| 46 | Supply and wiring of sub main with two Nos 2.5 Sq.mm F.R.P.V.Cinsulated 1100V grade multi strand single core copper conductor, cable in 20mm dia heavyduty (2mm thick) PVC conduit on surface with one number 1.5 sq.mm multi strand copper conductor, cable as earth continuity wire drawn in a conduit .(UPPWD ELE SCH 2018 ITEM NO 1301C) |
| 47 | Supply and fixing of LED tube light of make Syska,Bajaj Phillips or equivalent make of 22watt on surface complete including all material and T&P etc in all respect as per direction of EIC (UPPWD ELE SCH 2018 ITEM NO 1413A CAT-A) |
| 48 | Supply and fixing of LED bulb of make Syska,Bajaj Phillips or equivalent make of 12watt on surface complete in all respect as per direction of EIC (NSI) |
| 49 | Supplying and fixing 63A DP isolator of approved make (Havells,Crompton, Anchor or equivalent) complete including all material and T&P etc in all respect as per direction of EIC(UPPWD ELE SCH 2018 ITEM NO 1005B CAT A) |
| 50 | Supply and fixing of 6 Amps to 32 Amps MCB 10KA HAVELLS or equivalent make including all materials, labour and t&p requiered for proper completion of work as per direction of EIC (UPPWD ELE SCH 2018 ITEM NO 1002 CAT -A) |
| 51 | Supply and fixing of power plug with 15Amps. 250V. Flush type switch and 5pin 15A-250V. Flush type universal socket in suitable M.S.box of 175x100x50mm Size with phenolic laminated bakelite sheet cover 3mm. Thick fixed with brass machinesscrews and cup washer(UPPWD ELE SCH 2018 ITEM NO 1139) |
| 52 | Supply and fixing of surface /flush mounting 12 ways SPN Distribution board with additional metal door without MCB complete in all respect as directed by EIC(UPPWD ELE SCH 2018 ITEM NO 1025 CAT-A) |
| 53 | Supply and fixing of 1200mm sweep ceiling FAN of make USHA/HAVELLS or its equivalent makeincluding supply of all material, labour, T&P etc. required for proper completion of work as per direction of EIC. (C.S.I.28.39 ) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
