Military Engineer Services-MES has published Tender For Repair To Plastering, Periodical, Flooring, Roof Treatment And Connected Work In Lekhanagar Under Ge(U) E/M Meerut Cantt. Submission Date for this Tender is 19-06-2024. Shed Construction Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 12-Jun-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-06-2024 |
FileName | File Description | File Size |
f9c1d56f-b7b9-4a42-8062-9b106d5348db.html | Tender Notice | 0 KB |
BOQ_733386.xls | Tender Document | 0 KB |
CreditSchedule8609.pdf | Tender Document | 0 KB |
PS8609.pdf | Tender Document | 0 KB |
Tender8609.pdf | Tender Document | 0 KB |
Tendernotice_1.pdf | Tender Document | 0 KB |
Sl. No. | Item Description |
1 | Taking down chowkats or frameswith shutters(without taking offshutters from frames) area exceeding 1.50 square metre andnot exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical after fixing new chowkhats / frame to existing finish without any extra cost to Govt.) complete all as specified and directed |
2 | Taking down chowkat or frames with shutters (without taking off shutters from the frames)n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identicalafter fixing new chowkhats / frame to existing finish without any extra cost) complete all as specified and directed |
3 | Taking down shutters of any description exceeding 1 square metre each and n. exc 2 Sqm complete all as specified. |
4 | Taking down and refixing shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each in same opening, complete all as specified and directed |
5 | S&F 2nd class hard wood (sal/hollock),plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick completeincluding fixing only aluminiummongery such as tower bolt (one Nos each Shutter 150 mmlong) ,handle,( 150 mm long 2Nos on eah doors ) hinges ( 100 mm long heavy dutyMS ),aldrop bolt ( 01 Nos on each doors 300 mm long with hasp and staple complete aluminium) etc complete all as specified and directed |
6 | S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut &mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats completeincluding fixing only iron mongery such as wer bolt (one Nos each Shutter 150 mmlong) ,handle,( 150 mm long 2Nos on eah doors ) hinges ( 100 mm long heavy dutyMS ),aldrop bolt ( 01 Nos on each doors 300 mm long with hasp and staple complete aluminium) etc complete all as specified and directed |
7 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing on page No. 150 MES SSR-2004 Part II and complete all as specified and directed |
8 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rails.M.S. frame shall be covered with heat mouleded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom railon either side & as gap insert for top rail & bottom rail.Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification clause No.8B.1 to8B.10 and drawing on page No. 146 of MES SSR-2004 Part-II complete including fixing only iron mongery such as wer bolt (one Nos each Shutter 150 mmlong) ,handle,( 150 mm long 2Nos on eah doors ) hinges ( 100 mm long heavy dutyMS ),aldrop bolt ( 01 Nos on each doors 300 mm long with hasp and staple complete aluminium) etc complete all as specified and directed |
9 | S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, and directed by Engr-in-charge. |
10 | M&L for rolled mild steel work of angle ironas in frames of doors & Cup Board etcconforming to grade Fe 410-O or Fe-310-Ocomplete all as specified and directed |
11 | S&F of stainless steel wire cloth cut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed |
12 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steelstaple complete all as specified and directed by Engr-in-Charge. |
13 | S&F in repair MS helical door spring 150mm size incl roller and roller platefixed to wooden or steel frames incl necessary welding etc complete all as specified and directed |
14 | S&F in repair 18/19 mm thick prelaminated particle boards bothsides with decorative choice laminations, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board exposed face fixed with 20x6mm thick teak wood beading complete all as specified and directed |
15 | S&F 100 mm longmild steel hasp and staple complete all as specified and directed |
16 | S&F of 200 mm long mild steel barrel tower bolts, extruded section complete all as specified and directed |
17 | S&F of mild steel sliding door bolt plate type250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, completecomplete all as specified and directed |
18 | S&F of150 mm long mild steel pressed steel handle, oval type, stove enameled blackcomplete complete all as specified and directed |
19 | M&L for hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete complete all as specified and directed |
20 | S&F of 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane fixing in glass any height/ any stories without any financial effect complete all as specified and directed |
21 | S&F in repair stainless steel grade 304conduit pipe 25mm bore (Drapery rod) with a pair of stainless steelclamps to hold drapary rod and decorative attachment atboth ends of drapary rod,fixed to opening of door/windows, with a pair of clamps and a pair of side ornamental attachments), complete all as specified and directed by Engr-in-Charge. |
22 | Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15mm complete complete all as specified and directed |
23 | M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm, complete complete all as specified and directed |
24 | Fixing only Steel water tubing 15mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and directed |
25 | S&F in repairs Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brasswith polyethylene float and fly nut and tank nipples incl dismantling existing RCC and PVC water tank of any capacity and removing from site, complete all as specified and directed |
26 | Supply and fixing in repair ball valves of size 20mm bore dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixedincluding necessary fitting as reqd at site complete all as specified and directed |
27 | Supply and fixing in repair ball valves of size 15 mm bore dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixedincluding necessary fitting as reqd at site complete complete all as specified and directed |
28 | Supply and fixing in repair angle valves cast copper alloy 15 mm, chromimum plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge. |
29 | M&L for cleaning the existing surfaces and removal of debris , loose particles , grass etc and existing water proofing roof treatment completely and repairing the cleaned surfaces through repair mortar and providing chemical injection grouting and angle filets ( if required ) and treatment of pipe entry with hybird PU sealant dual shrinkage compensated micro conrete.Applying priming coat of epoxy primer with resin hardner in 1:1 ratio with water dilution as per manufacturerinstructions applying 2 coats of solvent based polyrethane liquid membrane not less than 500 micron thick UV having SRI valve greater than eual to 105 with consumption of 0.61 kg/sm ( each coat), 2nd coat shuld be applied once 1st coat becomes dry completely including 40mm thick (average thickness) PCC 1:2:4 type B-1(using 20 mm graded stone aggregates) as in paddingon roof finished even and fair without using extra cement and all as specified and directed. (Make : Asian Paints /Thermax/Berger) |
30 | S&F powder coated anodised aluminium windows slidingtype (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) inclstainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed. |
31 | Taking down PVC (SWR) pipe 110 mm dia fixed in position complete all as specified and directed by Engr-in-Charge. |
32 | S&F PVC (SWR) Pipe 110mm dia single socketin any length with rubber ring joints fixed to wall including PVC clamps complete all as specified and directed by Engr-in-Charge. |
33 | S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed by Engr-in-Charge. |
34 | M&L uprooting of plants (girth n.exc 15 cm of trunk to any type of plants 100 ml grown along the pipes or walls chajjas, parapets and roof of building at any height (incl multistoried) and making good the surface as per existing surface and pouring acid not less than 100 ml for each plant in the roof to avoid further growth complete all as specified and directed by Engr-in-Charge. |
35 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
36 | M&L for15 mm thick rendering on fair faces of brick or stone/concrete surfacesin cement mortar 1:4 and finished surfaceeven and smooth without using extra cement complete with water proofing compound (Height of work to be considered upto 9.50mtr from FFL of Ground Floor.), complete all as specified and directed |
37 | M&L for5 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finishedeven and smooth without using extra cement complete all as specified and directed |
38 | M&L for10 mm thick rendering on fair faces of brick /concrete surfacesin cement mortar 1:6 and finishedeven and smooth without using extra cement complete all as specified and directed |
39 | M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces over a coat of 1mm thick wall care putty, complete all as specified and directed |
40 | M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed |
41 | M&L for applying two coats of external Weather proof emulsion paint on walls after preparation of newly plastered surfaces over a coat of 1mm thick wall care putty,complete all as specified and directed |
42 | Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge. |
43 | M&L for Glazed ceramic coloured tiles 300mm x 200mm x 7/450X250x7 mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry,pointed in white or coloured cement to matchover and including 10mm thick renderingin cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-charge. |
44 | M&L for Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.complete all as specified and directed by Engr-in-Charge. |
45 | M&L Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble, complete all as specified and directed by Engr-in-charge. |
46 | M&L for applying two coat of synthetic enamel paint on new wooden surfacesincluding preparation of newly wooden surfaces over a coat of pink primer, complete all as specified and directed |
47 | M&L for applying two coat of painting on new steel surfacesincluding preparation of newly steel surfaces over a coat of red oxide primer, complete all as specified and directed |
48 | Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in -Charge |
49 | Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, iron doors, ladders, framed balusters, walk ways railings, framework of watertanks and similar work, conforming to Fe-290, Gde E-165, complete all as specified and directed by Engr-in-charge. |
50 | M&L for oldplastered surfaces applying Two or more coats of 100% Premium external weatherproofpaint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over andincluding priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. complete all as specified and directed.Make:-Apex Ultima protect/Berger paints(weather coat smooth)). |
51 | Rewriting or repainting of existing writing letters (Block or Indian) with synthetic enamel paint white with 150 mm hieght of letters over 30 mm dia of circle black syntheic eanemal paint all as specified and directed by Engr-in-Charge. |
52 | Preparation of old plastered/unplastered wallsurfaces and applying one coat of oil bound distemper (including wahsing, rubbingdown and stopping of distempered and painted surfaces), complete all as specified and directed |
53 | M&L for 1mm thick wall care putty of wall surfaces, complete all as specified. |
54 | M&L for prepration of old surfaces including cornices, pilasters etc(Plastered or unplasterd surfaces) and applying one coats of white (Lime) wash on wall complete all as specified and directed |
55 | M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.(Note:-Using roller for painting and use scrapping machine for scrapping work) |
56 | M&L for prepration of old steel/iron surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail