Military Engineer Services-MES has published Tender For Special Repairs To Offers Md Accommodation Block No P-41 At Hathikhana Enclave Morar Cantt Under Ge Gwalior. Submission Date for this Tender is 12-06-2024. Building Work Tenders in gwalior Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Jun-2024 | Corrigendum 1 | BOQ | 12-06-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) incl the disposal upto 50M distance complete all as specified and directed. |
| 2 | M&L for 25 mm thick cement concrete (1:2:4) type B0(using 12.5mm graded stone aggregate) as in leveling course complete all as specified and directed. |
| 3 | M&L for Vitrifiedceramic coloured tile 7mm to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match over & including 15 mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:6)complete all as specified and directed. |
| 4 | M&L for non-skid ceramic coloured tile 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 10 mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:4) complete all as specified and directed. |
| 5 | M&L for non-skid ceramic coloured tile 7mm to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bed or bedding layerin cement plaster (1:6) for laying floor finishes complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tilingof any description and in any positionincluding cement mortarbedding (but not backing) complete all as specified and directed. |
| 7 | M&L forglazed ceramic coloured tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm in vertical surfacethick set and jointed in neat cement slurry and pointed inwhite or colour cement to match, laid over and including 10mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) complete all as specified and directed. |
| 8 | Dismantling of stone slab and tiles of any description or thickness in floor, aprons etc laid dry and pointed in any mortar complete all as specified and directed. |
| 9 | M&L of 20 mm thick screed bed or bedding layer for laying floor finishes in cement mortar (1:6) complete all as specified and directed. |
| 10 | M&L for 18mm to 20mm thick machine cut kota stone flooringover cement screed base laidand jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note : Screed base shall be paid under Item No 09 here-in-before. |
| 11 | M&L for 20-25mm thick machine cut Kota stone slab in riser of steps, skirting, dado and pillar laid over and including 10mm thick cement plaster in CM 1:3 and jointed complete all as specified and directed. |
| 12 | Demolition of Brickwork or stone/boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 13 | M&L for Brickworkwith sub class "B" bricks old size brick, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed. |
| 14 | Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 15 | M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 16 | M&L for 15 mm thick rendering in cement mortar (1:4) onfair faces of brick work or concrete surfacesand mixed with WPC,finished even and smooth (without using extra lime or cement) complete all as specified and directed. (Note:- WPC shall be measured & paid seperately). |
| 17 | M&L for5mm thick rendering in CM (1:3) on ceiling surface finished even and smooth (without using extra lime or cement)complete all as specified and directed. |
| 18 | Supply onlyliquid water proofing compound complete all as specified and directed. |
| 19 | M&L for preparation of new plaster surfaces of wall and applying two coats of distemper oil emulsion over a coat of 1-2 mm thick wall care putty & over a coat of alkali-resistant primming paintcomplete all as specified and directed. |
| 20 | M&L for applying two coats of cement base paint, including preparation of newly plastered surface of walls complete all as specified and directed. |
| 21 | M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash all as specified and directed. |
| 22 | M&L for preparation of old decoratedsurface of ceiling and applying one coat of white wash complete all as specified and directed. |
| 23 | M&L for preparation old surfaces of wallincluding, complete removal of existing treatment complete all as specified and directed. |
| 24 | M&L for applying2-3 mm wall care putty on walls and applying two coats oil emulsion distemper over a coat of primer complete all as specified and directed. |
| 25 | M&L for preparing of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforecent salt and trading oil and greasy spots plastered or un plastered surfaces of wall including cornices, pilasters etc complete all as specified and directed. |
| 26 | M&L for applying one coat of cement base paint white or tinted complete all as specified and directed. |
| 27 | M&L for 40 mm thickcement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors,laid in panels and finished even & smooth with using extra cement complete all as specified and directed. |
| 28 | Supply only Glass dividing strips, 3mm thick and width of strip 38mm, inserted in position in floors complete all as specified and directed. |
| 29 | M&L for cement concrete 1:5:10 type E2(using 40mm graded stone aggregate) as in sub base of floor or sunken floor etc complete all as specified and directed. |
| 30 | M&L for 75 mm thick PCC 1:3:6 type C-1(using 20mm graded stone aggregate)finished even and smooth without using extra cement as in plinth protection including forming of joints 10mm wide and 75mm deep and joint filled with bitumin and sand mixture in 1:1 ratio complete all as specified and directed. |
| 31 | Taking down shutters of any description size exceeding 1 sqm and n.exc 2 sqm each and removing to store complete all as specified and directed. |
| 32 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) size n.exc 1.50 Sqm each complete all as specified and directed. |
| 33 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n.exc 4 sqm each complete all as specified and directed. |
| 34 | S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, as per specification complete all as specified and directed. |
| 35 | S&F for pressed steel frame of size 105mm x 60 mm for door with one or more rebates makaing necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 36 | S&F for pressed steel frame of size 125mm x 60 mm for door with one or more rebates makaing necessary fixing lugs ,hinges, lock strike plate etc complete all as specified and directed. |
| 37 | M&L for cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as filling inside pressed steel frame complete all as specified and directed. |
| 38 | S&F for factory made solid PVC moulded door shutter, 28mm to 30mm thick (stiles) with 2 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core S&F in frame at site as per specification complete all as specified and directed. |
| 39 | S&F for 35 mm thick factory made shutter, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 40 | S&F for 35mm thick factory made glazed and skelton shutters 2nd class HW open rebated and prepared to receive gauage (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred bead or security glass etc.Size of members of shutters as specified in IS-1003 supplied and fitted to chowkhats complete all as specified and directed. |
| 41 | S&F for Box Type steel windows, Ventilator with side hung shutters (double shutters for glass and gauge ) joined together with and including grills using 12 mm square bars @ 10 mm c/c as per TD No CEBZ/TD/14/2011, Sheet no -1/7 to 7/7 Including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and weldedand preparing new steel surfaces, exc. 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified. |
| 42 | S&F for 150 mm size aluminium anodised, barrel tower bolts of extruded sectionand fixed complete all as specified and directed. |
| 43 | S&F for extruded aluminium alloy handles 125 mm size, fabricated type, anodised complete all as specified and directed. |
| 44 | S&F for 75 mmsize butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 45 | S&F for aluminium door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 46 | S&F for Butthinges, 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed. |
| 47 | S&F forAluminium handles, cast type anodised of Size 150 mm complete all as specified and directed. |
| 48 | S&F for 150 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 49 | S&F for 250 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy complete all as specified and directed. |
| 50 | S&F for 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 51 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 52 | S&F for18 /19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 53 | S&F forcontinuous (piano) hinges,mild steel, bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed. |
| 54 | S&F in renewal of 19/20mm thick block boards grade 2 quality, interior grade, commercial type fixed with screws to timber frame-work complete all as specified and directed. |
| 55 | S&Ffor75 mm size Hasp & Staple, safety type, aluminium anodised hinge pin, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 56 | S&Fin renewal of75 mm size Hasp & Staple, safety type, aluminium anodised hinge pin, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 57 | M&L for mild steel work as in bands, straps, clamps, hold fasts, wall tiles, plain angle cleats for securing purlins to wood trusses or refters, and similar samll articles confirming to Fe- 290 Gde E-165 complete all as specified and directed. |
| 58 | S&F for 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square, size not exceeding 0.5 Sqm of each pan complete all as specified and directed. |
| 59 | S&F for 4mm thick figured glass, pin head typeand glazing with oil putty in square not exceeding 0.5 Sqm of each pane complete all as specified and directed. |
| 60 | S&F for galvanised mild steel wire cloth 0.46 nominal dia of wires and average width of aprature 1.18mm and fixed with tinned tacks galvanised wire staples fixedincluding a coat of french blue paints complete all as specified and directed. |
| 61 | S&F in renewal of galvanised mild steel wire cloth 0.46 nominal dia of wires and average width of aprature 1.18mm and fixed with tinned tacks, or galvanised wire staples fixed including complete all as specified and directed. |
| 62 | M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 63 | M&L forpreparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 64 | Taking down steel tubing and connection 15mm bore inclremoving from site complete all as specified and directed. |
| 65 | All as per Item No. 64 above but 20 mm dia pipe complete all as specified and directed. |
| 66 | M&L for GI tubing 15mm dia medium grade galvanised with all fittingsfixed to wall and floor complete all as specified and directed. |
| 67 | All as per Item No 66 above but 20 mm dia pipe complete all as specified and directed. |
| 68 | S&F in renewal of PVC (SWR) floor trap, plain with grating including jointing with solvent cement and fixed75mm dia outlet complete all as specified and directed. |
| 69 | S&F in renewal of 15mm bore bib taps, fancy type chromium plated cast copper alloy with capaston head handle, screwed down screwed iron pipe or for brass ferule fixed complete all as specified and directed. |
| 70 | S&F in renewal of Stop valve, cast copper alloy, screwed down, high pressure, with capston headed handle chromium plated concealed type screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed. |
| 71 | S&F in renewal of PVC connection 15mm sizewith PTMT nuts on both endsof length 450 mm complete all as specified and directed. |
| 72 | S&F in renewal of swivel shower of brass chromium plated of size 125mm for fixing with 15mm bore pipe complete all as specified and directed. |
| 73 | S&F in renewal of tabular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 74 | S&F in renewal of grating 100/125 mm dia of PTMT, fixed to Nahani trap complete all as specified and directed. |
| 75 | S&Fin renewal of PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed. |
| 76 | S&F in renewal of Brass CP mixer with Mark "Hot" or "Cold" on taps for basin mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 77 | S&F in renewal of 15 mm bore, cast copper alloy chromium plated fancy type wall mixer tap with telephonic shower(3-in-1 system) for cold & hot water wall mixerwith Mark "Hot" or "Cold" on taps complete all as specified and as directed. |
| 78 | S&F in renewal of stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of size 900mm x 750 mm includingscrews and wt not less than 5.00 Kg each complete all as specified and directed. |
| 79 | S&F for kitchen sinks made of stainless steel 1mm thick with kitchen or laboratory with plug, washers, wastes, including fixing (cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm) complete all as specified and directed. |
| 80 | S&F in renewal of wash hand basin vitreous china (flat back) of size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper with and including brackets cutting and S&F angle iron brackets of size 25 x 25 x 5mm & suitable length for and pinning in ends complete all as specified and directed. |
| 81 | S&F for viterous china wash down water closet pan (pedestal pattern) or wall mounted white fixing bolts, excluding flushing cistern and flush pipe including Seat cover, connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & CP Jet complete all as specified and directed. |
| 82 | M&L in renewal ofvitreous china squatting pan, orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed. |
| 83 | S&F in renewal of32 mm size waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 84 | Dismantling of water tank capacity exceeding 250 Ltrs but not exceeding 500 Ltrs complete all as specified and directed. |
| 85 | S&F forrotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litres hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed. |
| 86 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning for refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. |
| 87 | S&F for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 88 | S&F for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 89 | S&F for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 90 | S&F for PVC (SWR) bends any radius, 110mm bore, complete all as specified and directed. |
| 91 | S&F for PVC (SWR) bends any radius, 75mm bore, complete all as specified and directed. |
| 92 | S&F for PVC (SWR) junction single (single T), equal or unequal, 110mm bore,complete all as specified and directed. |
| 93 | S&F for PVC (SWR) junction single (single T), equal or unequal, 75mm bore,complete all as specified and directed. |
| 94 | S&F in renewal of PVC mirror cabinet with looking mirror overall size 560mm x 350mm x 120 mm complete all as specified and directed. |
| 95 | M&L for 18 mm thick Granite (of any type) tilesmachine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 96 | S&F in renewal of 20 mm dia fancy type vista patern aluminium curtain roads with required colour powder coated of approved shade including bracket/joints/wall to wall and with rings of best quality as approved by Engineer-in-Charge complete all as specified and directed. |
| 97 | M&L for preparing of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforecent salt and trading oil and greasy spots plastered or un plastered surfaces of wall including cornices, pilasters etc complete all as specified and directed. |
| 98 | M&L for applying one coat of cement base paint white or tinted complete all as specified and directed. |
| 99 | M&L for preparing of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforecent salt and trading oil and greasy spots plastered or un plastered surfaces of wall including cornices, pilasters etc complete all as specified and directed. |
| 100 | M&L for applying two coats of oil emulsion distemper white or tinted complete all as specified and directed. |
| 101 | M&L for applying two coats of distemper oil emulsion white or tinted over and including a layer of 3mm thick wall care putty on wall complete all as specified and directed. |
| 102 | Removing existing water proofing treatment (Brick tile terracing), roughning of concrete surfaces, cleaning of concrete surfaces with water and removing debries/rubbish off materials out side of Ministry of defence (MOD) land complete all as specified and directed. |
| 103 | Cuttingout cracks to "V" section in existing roofs or tarracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed. |
| 104 | M&L for 25 mm thick PCC 1:2:4 type B-0(using 12.5 mm graded BT stone aggregate) as in levelling course complete all as specified and directed. |
| 105 | M&L for 15mm thick screed bed of cement mortar (1:4) on concrete surfaces mixed with WPC, surface finished even and smooth w/o using extra cement complete all as specified and as directed. (WPC shall be measured & paid seperately). |
| 106 | M&L for bitumenous based primer conforming to IS-3384-1965 @ 0.40 Kg / Sqm including preparation of roof surface complete all as specified and as directed. |
| 107 | M&L for APP based polymeric membrane minimumweighing 3.5kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application method complete all as specified. |
| 108 | M&L for after laying the membrane apply bituminouse aluminium paint @ 200 gm/Sqm (minimum) in two coats complete all as specified and directed. |
| 109 | M&L for100 mm thick cement concrete 1:4:8 type D-2(using40 mm graded stone aggregate), as in sub base for floor, finished even and rough complete all as specified and directed. |
| 110 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 111 | M&L for60 mm thickness rubber moulded machine pressed precast concrete interlocking paver block M-35 any shape and size, confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sandcushioning complete all as specified and directed. |
| 112 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations etc or for shafts, well cess pits, manholes, pier holes, etc but not exceeding 10 Sqm on planand getting out insoft/ loosesoil complete all as specified and directed. |
| 113 | Demolition and breaking up drain pipes of 150 mm internal dia(Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified anddirected. |
| 114 | Demolition of brickwork, plain cement concreteor stone/ boulder masonry, built in cement or lime mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified anddirected. |
| 115 | M&L for Brickwork old size with sub class ‘B’bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 116 | M&L for cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) in bed to drain pipe including packing under and hunching against the sides of pipes after they are laid and tested complete for pipe of size150mm bore complete all as specified and directed. |
| 117 | M&L for 150 mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed. |
| 118 | M&L for cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in surfaces channels drains and benching including form work and finishing fair and smooth using extra cement complete all as specified and directed (forming fair finished channel shall be measured and paid for separately). |
| 119 | M&L for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slabs for man holes and set in CM (1:6) including necessary from work complete all as specified and directed. (Note: Reinforcement and form work shall be measured paid separately) |
| 120 | M&L for PCC 1:2:4 Type B1 using (20mm graded stone aggregate) as in coping and grove cutting every 1.5m length including use and waste of necessary form work complete all as specified and directed. |
| 121 | M&L for mild steel TMT bars, 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 122 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in loose/soft soil complete all as specified and directed. |
| 123 | Removing excavated materialn.exc 50m and depositing where directed at a level n.exc 1.5mabove the starting point complete all as specified and directed. |
| 124 | Cutting into existing manholes for connecting new drains of internal dia 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) smooth finished, and reforming benching as required complete all as specified and directed. |
| 125 | Taking down carefully existing aluminum/copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 126 | Taking down ceilingfan/exhaust fan of any sweep, removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including renewal of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and directed. |
| 127 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 128 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB"s of any make/capacity complete all as specified and directed. |
| 129 | Taking down unserviceable TPN DBwith MCB"s of any make/capacity, complete all as specified and directed. |
| 130 | Taking down the water heater (Geyser) storage type of any make25/50 Ltrs capacity. Dismantling carefully from its position fixed on walls, descaling the inner tank, flange assembly by applying descaling solution, reassembling the same, after renewal of defective parts and re-installing to their original locations or as directed after commissioning and testing complete all as specified and directed. |
| 131 | Taking down existing energy meter and Refixing the same back to its original positions including connecting with requirement connection etc, complete all as specified and directed. |
| 132 | M&L for concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade confirming to IS 14930 (Part-I) 2001( ISI marked with valid CML No)not less than 20 mm diawith all fitting and fixing accessories and1.5 Sqmm FRLSH , PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel modularsunken terminal boxesfactory madeduly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint insidefor mounting switches, sockets etccomplete all as specified and directed. |
| 133 | One light point controlled by one switch. |
| 134 | One Ceiling fan point controlled by one switch. |
| 135 | One Exhaust fan point controlled by one switch. |
| 136 | One Bell/Buzzer point controlled by one way 5 Amp push button switch. |
| 137 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 138 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 139 | For one light pointcontrolled by 2- two way switch |
| 140 | Description all as per item No 132 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire (Only for power point) complete all as specified and directed. |
| 141 | Description all as per item No 132 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire (for inverter) complete all as specified and directed. |
| 142 | S&F of Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 143 | S&F of Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 144 | S&F of Modular switch 1 way 16A, 1 module 15 Amp complete all as specified and directed. |
| 145 | S&F of Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 146 | S&F of Socket 25A - 2/3 pin combined 2 module complete all as specified and directed (for AC and Inverter) |
| 147 | S&F of Modular switch 2 way 6A, 1 module complete all as specified and directed. |
| 148 | S&F of modular bell push flush type, 5 Amps complete all as specified and directed. |
| 149 | S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed. |
| 150 | S&F of ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 151 | S&F of Fan step regulator, 120W-2 module 240 volts, AC 50Hz complete all as specified and directed. |
| 152 | S&F of Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete all as specified and directed. |
| 153 | S&F of LED "T" Type Mirror light fitting09/10 watt , 6500k , luminous efficiency >130lm/watt with provision of fixed in Lamp holder complete all as specified and directed. |
| 154 | M&L for sub main wiringwith two single cores PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade confirming to IS 14930 (Part-I) 2001, (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSHcopper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.(NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 155 | M&L for sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 2.5 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 2.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.. (NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.) |
| 156 | M&L for sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade confirming to IS 14930 (Part-I) 2001 (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH , copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. NOTE : For AC and Geyser connection. |
| 157 | S&F of Decorative ultra slim LED Tube light fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500Kfitting, Efficiency >100 lumen/watt including reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 158 | S&F of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 159 | S&F of modular, AC starter with MCB SP 240 volts, 20 Amps, "C" series 10 KA including connection with suitable size copper lugs complete all as specified and directed. |
| 160 | S&F in renewal of sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp, 4 pole & Including MCCB 100 amps 4 pole 16 KA complete (when MCB"s are to be used) with suitable size of busbar complete, fixed flush in wall including chases wall for fixing DB and making goodthe distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 161 | S&F of MCB DB, sheet metal enclosures double door SPN 12 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed. |
| 162 | S&F of MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed. |
| 163 | S&F of MCB SPN63 Amps, 240 volts "C" series 16KA, including connection with suitable size copper lugs complete all as specified and directed. |
| 164 | S&F of MCB SP 240 volts, 6to 32 Amps, "C" series 10 KA including connection with suitable size copper lugs complete all as specified and directed. |
| 165 | S&F of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed. |
| 166 | Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor 1100 volts grade, cross sectional area size 50 Sqmm 3.5 Core complete all as specified and directed. |
| 167 | Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed. |
| 168 | Supplying and laying un reinforced precast concrete cable cover Class LV, Type I, flat of size 250mm x 150mm x 40mm complete all as specified and directed. |
| 169 | Supply and fix cable jointing kit for 1.1 KV grade cable for End terminal joint outdoor complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, aluminium conductor cable of size 25 to 50 sqmm, Indoor/Outdoor type complete all as specified and directed. |
| 170 | S&F of tube "Light" grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. |
| 171 | Taking out old u/s pipe line alongwith fittings from existing connections of size 50 mm dia complete all as specifies and directed. |
| 172 | All as item No. 164 above but of size 25 mm dia complete all as specifies and directed. |
| 173 | M&L for GI pipe medium grade of 50 mm dia alongwith all fittings and fixtures complete laid in trenchescomplete all as specified and directed. |
| 174 | M&L for GI pipe, medium gradeof 25 mm galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 175 | S&F of Gun metal Gate Valve of size 50 mm, iron wheel head with both ends for iron pipes complete including dismentaling of old u/s gate valve fixed at any location complete all as specified and directed. |
| 176 | All as per item No 168 above but of size 25 mm complete all as specified and directed. |
| 177 | Cutting of existing Cast iron pipes in position for insertion of new tees, for branch connection of 50 mm dia from bore of pipe existing CI pipe complete all as specified and directed. |
| 178 | Supply and installation of earthingelectrode 3.0 mtr length, galvanised outer dia 88mm and inner dia 48mm and the cavity between the rod pipes filled with ground resistance improment powder, sealed with both end. The outer pipe of electrode should be Zinc coated, the electrode should buried directly in ground by making boring of diameter 10" with boaringmachine highly connected with GI strip of size 25x3mm of 2 to 3 mtr length to facilitet further connection to earth dolly and provision of earthing chamber in bricks wall of size 45x45x15 cm and having PCCcover of required size made out of PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and directed as per IS 3034(1981). |
| 179 | S&F for modular plate and provising of new modular plate of different sizeincluding fixing, the existing modular switchs, modular socket, modulare regulator and refixing them in new board . Note : Renewal of any switches, sockets, fan regulator will be measured under separated items |
| 180 | White cover plate with frame but 2/3/4 module |
| 181 | White cover plate with frame but 6/8/12 module |
| 182 | S&F of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Minimum air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
