Military Engineer Services-MES has published Tender For Special Repair In Md Accn To Bldg No P-36 (Qtr No 01 To 12) At New Mil Stn Kapurthala Under Ge Kapurthala.. Submission Date for this Tender is 19-06-2024. Building Work Tenders in kapurthala Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Jun-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-06-2024 |
| FileName | File Description | File Size |
| 6a13a1bd-a588-4b85-a1ce-0943bdf36d22.html | Tender Notice | 0 KB |
| BOQ_733354.xls | Tender Document | 0 KB |
| Tender.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling offloor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick setand jointed in neat cement slurry pointed in white or colour cement to match the colour,with 15 mm thick cement screed bed(1:4) complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for non skid ceramic coloured tiles 7-8 mm thick (square/rectangular) polished, area of each tile exe 0.11sqm not exc 0.18 Sqmin floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for vitrified ceramic coloured tiles 10mm(square /rectangular)area of each tile exceedingn.exc 0.36 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for machine cut kota stone for cooking platform and flooring,riser and steps 20-25mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6 incl making hole for gas pipe complete all as specified and directed by Engr-in-Charge. |
| 6 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed by Engr-in-Charge. |
| 7 | Demolition of brick/block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises, complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 9 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge. |
| 10 | Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc complete all as specified and directed by Engr-in-Charge. |
| 13 | Uprooting of tree roots from walls/roof of any girth at any height/ location, of any depth by dismantaling brickwork/PCC by treating it with Ferro herbicide chemical agent on affected area making good the damaged portion as existing by PCC 1:2:4 type B-0 and finished with 15mm thick plaster in 1:4 complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for dugging out average 10mm thcik on disturbed chajja beam, slab portion and applying chicken wire mesh over disturbed portion fixed with drilling, bolting etc after anti corrosion treatement of steel bar and finally finished with 10mm thick (1:3) cement plaster mixed with WPC @3% by the weight of cement complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for preparation of affected concrete and steel surface as in ceiling of roof slab, beams by cleaning with metallic wire brush scrupiously and carrying out the following operations stepwise: (i) Applying rust remover solution on steel bars by using cotton waste swab or by brush and leave the surface for 15-30 minutes. Remove the loose rust particles by srcubbing with brush and wash the steel surface with water. (ii)Apply red oxide primer over cleaned steel surfaces. (iii) Apply epoxy bonding agent (adherent solution) over cleaned dust freed old concrete surface. (iv)Apply polymer mortar with the help of trowel in single or multilayer as an when required during application and finishing the surface even and smooth. Note:- (a) The bars which are corroded badly need to be strengthen by placing new bars by means of welding with proper splice length and will be measured and paid seprately under appropriate item. (ii) The rate of item includes necessary formwork,shuttering, scaffholding, staging etc all as specified and directed by Eng-in-Charge. |
| 16 | Taking down cement plaster on brick work or concrete surfaces incl racking out joints complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for 15mm thick Rendering in CM 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc complete all as specified and directed by Engr-in-Charge. Note:- WPC shall be paid separately. |
| 19 | M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of whitewash on ceiling over a coat of birla white putty complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat birla white putty complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation ofsurfaces, complete all as specified and directed by Engr-in-Charge. |
| 23 | Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L PCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick as in sub base complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L for water proofing treatment to sunken floors of kitchen, toilets, laboratories,bath and WC"s etc shall be as under:- (i) Application of Two component acrylic modified cementitious coating. (aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement litance, existing coatings and achieve a gripping profile that is clean, dry and free from litanceand any other form of surface contamination. the installation instructions in manufacturer"s published literature should be strictly compiled with, including but not limited to the following:- (bb) Chipping out any visible cracks in " V- Groove" pattern as applicable. Special attention on this part cleaning of cracks and then filling those cracks with SIKA latex SBR 100 putyy/ Dr Fixit 302 SBR latex/ perma latex SBR / FOSROCNitibond SBR latex/ Asian Paints latex as required. Final cleaning of surface with power grinder, wire brush, hair brush and vaccum pressure if required. |
| 27 | (cc) Dampen all surfaces immediately ahead of application of Acrylic modified cemetitious coating of Sika Top seal - 107/brush Bond FOSROC/ Dr Fixit/ STP/ CICO. (dd) While the surface is still damp from saturation(SSD), apply one coat of acrylic modified cementitious coating of Sika Top seal- 107/ Brush bond FOSROC/ Dr fixit / STP/ CICO of viscosity as per manufacturer"s instructions. (ee) Apply glass fabric sheet of Sika Fab 1 / FOSROC/ Dr Fixit/ STP while the first coat is wet. (ff) Once touch dry apply second coat of Acrylic modified cementitious coating of Sika Top Seal- 107/ Brush bond FOSROC/ Dr FiXit/ STP/ CICO of viscosity as per manufacturer"s instructions on the entire area. (gg) Second coat shall be applied after 6-8 hrs of application of previous coat and in the direction right angle to the previous coat. (hh) The waterproofing coating should be taken to a height minimu 300mm above the finished floor level on the vertical surface. (jj) It is essential to cure acrylic modified cementitious coating immediately after application ( minimum 6-8 hrs drying) for a minimum of 3 to 54 days to ensure full cement hydration and to minimize cracking. |
| 28 | (kk) A protection plaster ( 12-15 mm thick) in CM 1:3admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture : - Sika Plastocrete plus/ FPSROC/ Dr Fixit / STP/ CICO confirming to IS 2645. Providing and applying a protection screed of 50 mm thick 1:4 cement sand mortar admixed with Sika plastocrtete over the applied water proofing coating on horizontal surfaces. Admixutre : Sika Plastocrete Plus/ FOSROC/ Dr Fixit/ STP/ CICO confirming to IS 2645. Providing and applying a protection screed of 50mm thick 1:4 cement sand mortar admixed with Sika Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture : - Sika Plastocrete plus/ FPSROC/ Dr Fixit / STP/ CICO confirming to IS 2645. (ll) All the corners and joints should be pretreated with elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of make Sika Seal Tape S/FOSROC/Dr Fixit/STP. |
| 29 | (mm) The membrane has to be protected in accordance with the manufacturer"s recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer"s recommendations. (nn) waterproofing treatment has to be carried out through applicators authorised. (i) All the joints of pipesand traps within sunken portion shall be selaed properly by Epoxy sealant. (ii) All CI traps in sunken slabs to be enclosed with PCC1:1.5:3 (min 15cm) all - round. (iii) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40 mmstone aggregate) complete all as specified. (iv) Providing drainage spout pipe GI 40mm dia bore light grade upto outside of outer wall ( Approx 450mm to 600 mm long) including cutting to existing wall and making good the disturbed surface complete all as specified and directed. (v) Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm grade stone aggregate as in flooring for laying floor finish all as specified. Note:- Item No 21 (iv) & (vi) shall be measured and paid seprately. |
| 30 | M&L PCC (1:5:10) type E2 using 40mm graded aggregate thick as in sub base complete all as specified and directed by Engr-in-Charge. |
| 31 | M&L PCC type B-0 (1:2:4) (12.5mm stone graded aggregate), 40 mm thick as for receiving top finishing layer of ceramic tiles for sunken portion finished even and smooth etc complete all as specified and directed by Engr-in-Charge. |
| 32 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed by Engr-in-Charge. |
| 33 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4sqm each complete all as specified and directed by Engr-in-Charge. |
| 34 | S&F solid PVC door frame of size 50x47mm made out of5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F factory made solid Panel PVC moulded door shutter with particle board core ,28 to 30mm thick (stiles) with 2,4 or 6 raise panel design with 2mm thick moulded pvc sheet on the front face and 2mm plain colour pvc sheet on back face supplying and fixing in frame at site complete all as specified and directed by Engr-in-Charge. |
| 36 | S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60mm filling hollow frame complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F Framed work as in doors Fe-410 W (Gde-E-250)or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L PCC 1:3:6 type C2 as in filling of chowkhats complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F factory made 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F PVC cupboard frame of size 75mm x 40mm with wall thickness of 5mm made out of extruded 5mm thick Plain/Printed/Prelam PVC sheet reinforced with 15mm x 15mm M.S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick(5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterprrof and fire retardent printed PVC sheet using solvent cement on both sides of panel complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F Veneered decorative plywood as in cupboard shelves,12mm thick, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatscomplete all as specified and directed by Engr-in-Charge. |
| 44 | S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed by Engr-in-Charge. |
| 48 | M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 49 | M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 50 | M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Handles of Z Sec 20mm x 100mm long (b) stopper – 01 No per leaf (c) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 Noper leaf (d)Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (e) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar and paid separately, complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 Noper leaf (e)Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F steel ventilators fixed type with glazing bars etc complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F 3.00mm thick acrylic sheet as in glasses in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engr-in-Charge. |
| 55 | S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil puttycomplete all as specified and directed by Engr-in-Charge. |
| 56 | S&F stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screwswith bolts incl leaping wooden complete all as specified and directed by Engr-in-Charge. |
| 57 | M&L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as specified and directed by Engr-in-Charge. |
| 59 | Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed by Engr-in-Charge. |
| 61 | Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low levelofMake 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F 20mm dia aluminium chromium plated tubular towel rails,D type, 60cm long between flanges, complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specified and directed by Engr-in-Charge. |
| 70 | S&F in repairsfor vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F in repairs shower rose 100mm with cp arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F utensil rack stainless steel of size 750x600x250 mm fixed on walls with screws complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F soap dish chromium plated heavy duty complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F in repair 25mm MS curtain rail powder coated with fixing brackets, stops, roller etc complete all as specified and directed by Engr-in-Charge. |
| 76 | Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing oretc and making good complete all as specified and directed by Engr-in-Charge. |
| 77 | Taking down eaves gutters and rainwater pipes including all fittings complete all as specified and directed by Engr-in-Charge. |
| 78 | Dismantling of cast iron pipe any diameter jointed with cement mortar or lead incl all fittings from wall or floors complete all as specified and directed by Engr-in-Charge. |
| 79 | S&F 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 80 | S&F 75 mm PVC (SWR) pipes in repair single socketed in any length laid in floor complete all as specified and directed by Engr-in-Charge. |
| 81 | S&F 75 mm PVC (SWR) bend complete all as specified and directed by Engr-in-Charge. |
| 82 | S&F 75 PVC (SWR) junction single,(single T)equal or unequal complete all as specified and directed by Engr-in-Charge. |
| 83 | S&F 75 PVC (SWR) junction double,(double T)equal or unequal complete all as specified and directed by Engr-in-Charge. |
| 84 | S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 85 | S&F 110 mm PVC (SWR) bend with complete all as specified and directed by Engr-in-Charge. |
| 86 | S&F 110 PVC (SWR) junction single,(single T) equal or unequal complete all as specified and directed by Engr-in-Charge. |
| 87 | S&F 110 PVC (SWR) junction double,(double T)equal or unequal complete all as specified and directed by Engr-in-Charge. |
| 88 | S&F 110mm PVC(SWR) vent cowl, complete all as specified and directed by Engr-in-Charge. |
| 89 | Dismantiling water tank PVC 500 Ltrs and removing from site, complete all as specified and directed by Engr-in-Charge. |
| 90 | S&F rotational moulded polythelene water storage tanks (Three llayered) cylindircal water tankfor hoisted and fixed in postion of 500 ltrs capcity incl fittings complete all as specified and directed by Engr-in-Charge. |
| 91 | S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs complete all as specified and directed by Engr-in-Charge. |
| 92 | S& F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engr-in-Charge. |
| 93 | Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs complete all as specified and directed by Engr-in-Charge. |
| 94 | Demolition of mud in roof any thickness including plastering & leeping removed complete all as specified and directed by Engr-in-Charge. |
| 95 | M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound complete all as specified and directed by Engr-in-Charge. |
| 96 | Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge. |
| 97 | Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed by Engr-in-Charge. |
| 98 | M&Lfor 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement complete all as specified and directed by Engr-in-Charge. |
| 99 | All as per item no 95 above but except brick tiles complete all as specified and directed by Engr-in-Charge. |
| 100 | M&L for 40 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slab without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 101 | M&L cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and directed by Engr-in-Charge. |
| 102 | Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engr-in-Charge. |
| 103 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :- (a) One light point controlled by one, one way switch |
| 104 | (b)One fan point controlled by one, one way switch |
| 105 | (c)One socket outlet 3 Pin, 5 Amp on independent board |
| 106 | (d) One socket outlet 3 Pin, 5 Amp on same board. |
| 107 | (e) One bell point controlled by one bell push |
| 108 | (f) One light point controlled by two 2 -way switches |
| 109 | M&L for point wiring with 4.0 Sqmm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board complete all as specified and directed by Engr-in-Charge. |
| 110 | S&Fswitch piano flush type single pole one way 5 Amp, complete all as specified and directed by Engr-in-Charge. |
| 111 | S&F switch piano flush type single pole one way 15 Amp, complete all as specified and directed by Engr-in-Charge. |
| 112 | S&F Bell push flush type single pole one way5 Amp, complete all as specified and directed by Engr-in-Charge. |
| 113 | S&F socket out let 2 in 1, 3 pin 5 Ampflush type, complete all as specified and directed by Engr-in-Charge. |
| 114 | S&F socket out let 2 in 1, 3 pin 15 Amp flush type, complete all as specified and directed by Engr-in-Charge. |
| 115 | S&F switch piano flush type single pole two way 5 Amp, complete all as specified and directed by Engr-in-Charge. |
| 116 | M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body, complete all as specified and directed by Engr-in-Charge. |
| 117 | M&L for bell multi music type, AC 230 Volts, single pole, complete all as specified and directed by Engr-in-Charge. |
| 118 | Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface, complete all as specified and directed by Engr-in-Charge. |
| 119 | Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076, complete all as specified and directed by Engr-in-Charge. |
| 120 | Taking down old unserviceable wall mounting fitting & supply & fixdecorative wall mounting type made up of polycarbonate rings, and glass shade with lamp holders, connectors block, 1 x 09 watt LED Blub,glass fitted engineering plastic B22 d lamp holder with electrical copper contactcs, self screwed polycarbonate diffuser in opal finish for soothing light effect, LED 09 watt etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable complete cat part No LHDL03160099, complete all as specified and directed by Engr-in-Charge. |
| 121 | Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 09W, complete all as specified and directed by Engr-in-Charge. |
| 122 | Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as specified and directed by Engr-in-Charge. |
| 123 | Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:- (a) S & F of MCB, 10 to 32 Amp, SP, 240 Volt |
| 124 | (b) S&F of MCB,25 to 32 to Amp, SPN, 240 Volt |
| 125 | M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductormulti-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-in-Charge. Note:- Three run of 6.00 Sqmm cableand one run of PVC Conduit shall be measured & paid as one unit.) |
| 126 | S&F in replacement Exhaustfans of 230 Volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specified and directed by Engr-in-Charge. |
| 127 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old and depositing to E/M store, complete all as specified and directed by Engr-in-Charge. |
| 128 | S&F water heater storage type electric, capacity 25 litres BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces, complete all as specified and directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
