Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet one end crimbed bend 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 3 | M&L for Pre-painted galvalume aluminium zinc coating GI based crimbed corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, andeves board fixed with self tapping screws as specified |
| 4 | Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if type 3 or any all as per direction by Engr In Charge. |
| 5 | S&Fstructural steel work conforming to Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified. |
| 6 | Supply & Fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts,if required: hooks (stay),heavy,for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securingpurlinstowood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165complete all as specified & directed by EIC. |
| 7 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering,slightly rounded or chamfered angles and throating, as directe incuding necessary formwork requiredcomplete all as specified and as directed by EIC. |
| 8 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified |
| 9 | M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primerall as specified and as directed. |
| 10 | M&L for old paintedSurfaces of any description, over 10cm in width or girth,not otherwise described two coats of synthetic enamel paint all as specified and as directed. |
| 11 | Material and labour for false ceiling with GI based steelsnap grid frame work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with hangers 4mm dia GI wire adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long or hooked to roof with needful adjustement bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 8/9 mm thick fixed to steelframe work including Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, including frame of any description and any thickness, fixed in any position . complete all as specified and directed by Engineer-in-Charge. |
| 12 | Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level. |
| 13 | M&L for 75mm thickPCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection ,finished fair and even, without using extra cement.complete |
| 14 | M&L 60mm thick machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of M35 grade complete all as specified. |
| 15 | M&L 100 mm thickPCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases/floors/pavings etc complete all as specified and as directed. |
| 16 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes. |
| 17 | M&L joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over& including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 18 | All as item No (17) here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified. |
| 19 | M&L ceramic coloured matt finish tiles 7 to 8 mm thick ( square/rectangular) area of each tile exc. 0.06 sqm but n. exc, 0.11 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed . |
| 20 | M&L glazed coloured ceramic tiles 450 x 300m x 7mm thick on vertical surfaces of walls as dado etc set and joined in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in cm 1:4 complete all as specified and as directed . |
| 21 | M&L for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and as directed. |
| 22 | Demolition of brick /stone masonary built in cement mortar including all quoins arches, pillars and precast concrete articles all as specified and as directed. |
| 23 | M and L for brickwork with flyash subclass \"B\"old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6)complete all as specified and as directed. |
| 24 | M and L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed. |
| 25 | Taking down of chowkhats or frames not exc 1.5 sqm each (without taking off shutters from the frame)complete. |
| 26 | Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed by EIC. |
| 27 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 28 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 29 | M&L for second class hard woodPlain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned atjoints, supplied and fixedcomplete all as specifiedand directed |
| 30 | Supply & Fixing 35 mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces.The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed by EIC. |
| 31 | Supply & Fixing 35 mm thick factory made glazed and skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze,divided into squares with plain chamfered mitred and rebated without sash bar as in doors, sizes of members of shutters as specifiedin SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified & directed by EIC. |
| 32 | Supply & Fixing 30 mm thick factory made glazed skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze,divided into squares with plain chamfered mitred and rebated sash baras in window/ventilator, sizes of members of shutters as specifiedin SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified & directed by EIC. |
| 33 | Supply & Fixing 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC. |
| 34 | Supply & Fixing 75mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC. |
| 35 | Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC. |
| 36 | Supply & Fixing 100mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC. |
| 37 | Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC. |
| 38 | Supply & Fixing 125 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC. |
| 39 | S& F in repairsAluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified. |
| 40 | S& F3.50 mm thick sheet plain glass, and glazing with oil putty in squaresnot exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 41 | Supply & fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescompleteall as specified. |
| 42 | S & F Harrison rail/Curtain rod of metalic 20mm dia with chromium plated including bracket both sidefixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified and directed. |
| 43 | M and L Creosote Oil including preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated all as directed. |
| 44 | S&F in repairs 15mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etcincl taking down GI Pipecomplete all as specified and as directed by Engineer-in-Charge. |
| 45 | S&F in repairs 20mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed by Engineer-in-Charge. |
| 46 | S&F 15 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc all as specified and directed. |
| 47 | S&F 20 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete as specified and directed. |
| 48 | S&Fin repairs rotational moulded polythylene water storage tanks 1000 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 210 gmscomplete all as specified and directed by Engineer-in-Charge |
| 49 | S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed by Engineer-in-Charge. |
| 50 | S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including urinal sprader chromium plated all as specified and directed. |
| 51 | S&F in repair Vitreous China squating urinals, model - VERTEX-KO509, Make - Kerovit Kajaria complete including providing and fixing plugs, bedding urinal against floor in cement mortar 1:2, securing urinal to plugs with and includingflushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) all as specified and directed. |
| 52 | S&F (in repairs) vitreous china squatting pan \"Orissa pattern\" size 580 x 450 mm white with integral foot rest (ISI marked) with \"P\" or \"S\" trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed. |
| 53 | S&F in repairs PTMT gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge |
| 54 | S&F in repairs vitreous China wash hand basinof size 550 x 400mm white flat back including15 mm dia bore fancy type long body pillar tap , waste coupling, brackets, PVC waste pipe of 32mm, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge. |
| 55 | S&F in repair stop valves15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed. |
| 56 | S & F 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to woodden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 57 | S&F repairs PVC connection15mm size with CP brass Nutsof length 450mm complete all as specified and as directed by Engineer-in-Charge |
| 58 | S&F in repairs fortowel rails of 20mm dia tubular brass chromium plated 60cm long \"D\" type fixed to all as directed by Engr-in-charge including taking down existing towel rail. |
| 59 | S&FBrass Chromium plated Tubular Towel rail, 20mm dia, D type,60 cm long between flanges fixed to wall complete all as specified and directed. |
| 60 | S&F in repairs CP towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed by Engineer-in-Charge. |
| 61 | S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge |
| 62 | S&F 15 mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 63 | S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors. |
| 64 | S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with Holder bat clamps of GI flat iron 25x3 mm all as specified anddirected. |
| 65 | S&F PVC (SWR) bends 75mm dia any radius. |
| 66 | S&F PVC (SWR) junction single(Single T) equal or unequal 75mm dia. |
| 67 | S&F PVC (SWR) 75mm diaFloor Trap, plain with CP grating including jointing with solvent cement. |
| 68 | Supply and fix 110mm PVC (SWR) WC connector bent type all as specified and as directed. |
| 69 | S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors all as specified and directed. |
| 70 | S&F PVC (SWR) bends 110mm dia any radius. |
| 71 | S&F PVC (SWR) junction single(Single T) equal or unequal with access door 110mm dia. |
| 72 | S&F PVC(SWR) reducers 110mmX75mm dia. |
| 73 | S&F PVC(SWR) Vent cowl 75mm dia. |
| 74 | S& F in repair for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 75 | Taking down cement plaster/terrazzo finish on wall of any description hacking for key scrubbing down with water including racking out joints. |
| 76 | M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement. |
| 77 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair without using extra cement. |
| 78 | M&L for preparingsurface of wall priming plastered and other surfaces with one coat wall care putty priming paint over two coat of Oil bond Distermper complete all as specified. |
| 79 | M&L for preparingsurface of wall priming plastered and other surfaces with white cement priming paint over two coat ofcement base paint complete all as specified. |
| 80 | M&L Complete removal of existing treatment on old surfaces on walls and applying two coats of distermpering on walls with distemper oil emulsion over aonecoat of wall care putty complete all as specified |
| 81 | M & L Complete removal of existing treatment on old surfaces on walls two cement base paint over a coat ofwhite cement primerincluding preparation of old surfacescomplete all as specified and directed vy Engr in Charge. |
| 82 | Cleaning of sewage line and connected Manholesany length from WC to Manhole, manhole to manhole, manhole to septic tank septic tank to soakwell by roding and well flushing after cleaning and removing mud etc to in pits complete all as specified and directed by Engr-in-Charge. |
| 83 | 100 mm bore dia of pipe |
| 84 | 150 mm bore dia of pipes |
| 85 | M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete. |
| 86 | M & L for 75mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed. |
| 87 | M&L for hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 88 | M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified. |
| 89 | Ditto as per above item No 86, but 6mm to 8mm dia |
| 90 | All as per item No.86 above but 5mm dia and over up to & including 10mm dia in stirrups, spacers & binders. |
| 91 | M&L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends,etc |
| 92 | Material & Labour for applying Two coats of Epoxy water proofing paintincluding priming coat of water proof based primer applied @ 0.90 litre/10 sqm over new surfaces as per manufacturer\"s instruction complete all as specified and directed. |
| 93 | S&F for 3D stainless steelCopper/Brass/Goldenor any other colouras approved by GEand fixed on wall with connceted drilling & connected works complete all as specified and directed. |
| 94 | Excavation in trenches n.exc. 1.5 M wide and n.exc. 1.5 M in depthand getting out in soft/loose soil all as specified and directed. |
| 95 | Returning ,filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm deep as in soft/loosesoil completete all as specified . |
| 96 | Removing soil n.exc.50& depositing where directed at a level n exc.1.5 m above the starting point,complete all as specified and directed. |
| 97 | Surface dressing n exc15 cm deepin soft/loose soil. Complete all as specified and directed. |
| 98 | Earth filling under floors including spreading, leveling, watering and well ramming in layers not exc 25 cm thick all as specified and directed. Note :- Soil obtained from excavation under item 2.00 here-in-before shall be used for filling. |
| 99 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and directed. |
| 100 | M&L PCC 1:3:6 type C2 (40mm graded agg) as in foundation, filling & Mass concrete complete all as specified and directed. |
| 101 | M&L for form work to sides of concrete foundation, footing, bases of columns, plinth beams and similar work, vertical or to batten rough finish flat surfaces on concrete complete all as specified and directed. |
| 102 | M&L for form work to sides and soffit of flooror floor beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs etc also splays between floors and bemss etc rough finish flat surfaces on concrete completeall as specified and directed. |
| 103 | M&L for form work to sides of Pillars, posts, struts piers, columnsetcin squarre, rectangular or polygonal,rough finished surfaces of concrete completeall as specified and directed. |
| 104 | M&L for use and waste of form work to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work,n.exc 200mm thick flat, rough finished surfaces of cencrete complete all as specified and directed. |
| 105 | M&L form wok to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specifed and directed. |
| 106 | M&L M-25 RCCusing 20mm graded stone aggregate in foundation including footing, plinth beam, base for column, etc complete all as specified anddirected. |
| 107 | M&L M-25 RCC using 20mm graded stone aggregate in for beams, cantilevers, bressummers and lintels over 1.5m span complete all as specified anddirected. |
| 108 | M&LM-25 RCC using 20mm graded stone aggregate in for columns, pillars, piers, posts and strutsetc complete all as specified and directed. |
| 109 | M&L M-25 RCCusing 20mm graded stone aggregate in for slabs sopported on walls ,beams and columns in floor s ,roofsetc complete all as specified anddirected. |
| 110 | M&L providing precast cement concrete Type B0 1:2:4 (using 12.5mm graded aggregate) as inlouvres and jallies 50mm thick including all mouldings set in cement mortar 1:6 complete all as specified and directed. |
| 111 | M & L 5mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 112 | M&L for Screed bed 15 mm thick in cement mortar 1:4 mixed with Water Proofing Admixture as per manufacture instructions on concrete surfaces of roof slab finishing the surfaces even and smooth complete all as specified . (WPC shall be measured and paid separately) |
| 113 | Supply only Liquid water proofing compound |
| 114 | M&L for PCC (1:4:8) type D2 (using 40mm graded aggregate) 100mm thick as in Sub base of flooring finished surface even and roughcomplete all as specified and directed. |
| 115 | S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face& 2 mmplain colour PVC sheet on back face, supplying and fixing in frame at site as per specification. |
| 116 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete. |
| 117 | M&L for 50mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & fair and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed. |
| 118 | M&L for cleaning of all loose dirt and dust from roof and priming the surface with one coat of cold applied bituminous primer @ 0.40 Kg/Sqm conforming to IS : 3384 and applying a layer of APP based polymeric membrane not less than 4mm thick weighing not less than 5.50 Kg/Sqm, reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) and upper side of membrane thermally insulated with white gravel finish uniformly embedded during manufacturing process. It shall be laid by torch application having side over lap 75 mm and at the end 100 mm, all overlaps and joints shall be sealed by torch application. For parapet, membrane shall be taken to a height of minimum 60 cm and inserted inside the parapet in a groove to a depth of 65 mm. The same shall be finished by a membrane flashing.Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates. |
| 119 | S&F in repairs rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including Ball brass valves, high pressure,20mm bore, with polythene float and flynutall as specified in SSR Part I and directed by Engr-in-Charge. |
| 120 | S&F 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed |
| 121 | S&F Brass chromium plated shower rose 125mm size fixed to 15mm bore pipe all as directed. |
| 122 | Material and labour for three coats of white wash on un-decorated surfaces of ceiling including preparation of surfaces complete all as specified and as directed. |
| 123 | M&L preparing new plastered surfaces of walls and applying three coats of white wash complete as specified and directed. |
| 124 | Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specification complete, keeping aside serviceable items and removing to store for reuse within the same bldg or otherwise and removing U/S items from site.Note :- The decision of the Engr-in-Charge as to which material and or serviceable or otherwisecredit to be afforded by the contractor for the unserviceable material shall be final and binding. |
| 125 | Taking down carefullyexisting wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size anycapacity fromboards completeall as specified and as directed. |
| 126 | Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed. |
| 127 | M&L for point wiring one light point controlled by one switch with PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with stranded copper conductor single core in and including rigid PVC surface conduit , clip, with suitable MS terminal boxes( not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green stranded copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and as directed |
| 128 | All as per item No125 but one fan point controlled by one switch & regulator. |
| 129 | ALL as per item No125 but One 3/5 pin5 Amp socket outlet point controlled by one switch on independent board. |
| 130 | All as per item No125 but One 3/5 pin5 Amp socket outlet point controlled by one switch on same board. |
| 131 | Description all as per item No 125 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathedFRLSH cable for 3/6 pin 6/16 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 132 | S&F switch piano flush button type 5 Amp single pole one waycomplete all as specified and asdirected.. |
| 133 | S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and asdirected. |
| 134 | S&F switch pianoflush button type 15 Amp single pole one way complete all as specified and asdirected. |
| 135 | S&F socket outlet2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and asdirected. |
| 136 | S & F delux Fan Regulator electronic rotary, socket type 240 Volt50 Hz complete all as specified as directed. Anchor/Kinjal |
| 137 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed |
| 138 | S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. |
| 139 | S&F ceiling rose,surface bakelite 63 x50mm three terminals completeall as specified and asdirected. |
| 140 | S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade withcopperconductor of size 6 sq mm (Nominal area) multi stranded drawn into cashing capingwith and including 6 sqmm green stranded copper conductor as contineous earthwire withlugs including pvc cashing caping complete all as specified and as directed. |
| 141 | S&F Vertical sheet metal enclosure VTPN MCCB 125A DB-Double door ,4 Way,Mechanical impact strength IK08,IP43 protected,Insulated busbar assembly,Isolated Neutral Bar,Door Earthing suitable for MCCB up to 125 Amp as incomer and SP/TP MCBs as outgoing complete all as specified and directed. |
| 142 | S&F sheet metal enclosure double doorconcealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus barSPN 8 ways 240 V complete all as specified and as directed . |
| 143 | Supply and fix 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA |
| 144 | S&F MCB single pole and neutral 40/63 Amp 240 V ,10KA , \"C\" series, complete all as specified and as directed with copper lugs |
| 145 | S&F MCB single pole 6 to 32Amps 240 V,10KA, \"C\" series,complete all as specified and as directed with copper lugs |
| 146 | Supply and fixing in repair 20 W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 20 watts lamp fitted including wiring upto and terminal into existing ceiling rose complete all as specified and directed by Engr-in- Charge |
| 147 | Supply and fix LED 35W street light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminiumIP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtrlength with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesinglecorePVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and directed. Make:bajajcat part No. BRLEP20WLEDWH or equivelent ofphilips/Havells /CG |
| 148 | M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. |
| 149 | Supply and fixingXLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 35 x 4 sq. mm, |
| 150 | Supply and fixing Double wall corrugated High Density polymer Ethylene (HDPE) pipe of size 50 mm diameter as per IS 14930 (part-2):2001 ,laid in trenchs/floors and fixing on walls/poles,with and including necessary fittingssuch as bends,socketand other connecteedaccessories etc for laying of electric cable,complete all as specified and directed |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail