}

Tender For Supply And Construction Of Op Tr Trg Area To Yellow Patch(Qty 3.20 Km), Rajouri-Jammu And Kashmir

Indian Army has published Tender For Supply And Construction Of Op Tr Trg Area To Yellow Patch(Qty 3.20 Km). Submission Date for this Tender is 03-06-2024. Bolts Tenders in Rajouri Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

43422229
Tender For Supply And Construction Of Op Tr Trg Area To Yellow Patch(Qty 3.20 Km)
Open Tender
Indian
Jammu And Kashmir
Rajouri
03-06-2024

Tender Details

Tender For Supply And Construction Of Op Tr Trg Area To Yellow Patch(Qty 3.20 Km); 1 SINGLE SIDED ‘W’ TYPE METAL CRASH BARRIER Supply of store at FOR,shifting of store from FOR to worksite and construction forerecting ‘W’ metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC vertical posts 150x75x5 mm erected @ 2.00 mtr centre to centre, 1.80 mtr hight, 1.10 mtr below GL/road level. All steel parts and fitment to be galvanized by hot dipped process. All fittings to be conforming to IS:1367 and IS: 1364. Metal beam to be fixed on vertical post with a spacer of channel section 150x75x5 mm,300 mm long including 1.20mtr long high intensity reflective conspicuity tape , Yellow 2 wide to be supplied with each crash barrier complete all as per drawing. Make :Jindal/ TATA/SAIL or Equivalent to IS 808(1989).List of stores for metal crash barrier:-(a)‘W’ shapedmetal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail 311 mm wide and 4000mm longgalvanized by hot dipped process including suitable holes for 12 mm dia bolts and nuts for fixng as per drawing.(b)ISMC vertical posts 150x75x5 mm1800 mm long galvanized by hot dipped process including suitable holes for 12 mm dia bolts and nuts for fixng as per drawing.(c) Spacer of channel section 150x75x5 mm,300 mm long galvanized by hot dipped process including suitable holes for 12 mm dia bolts and nuts for fixng as per drawing. (d) Bolts with hexagonal headand nuts 30mm long, 12 mm diawith three 3 mm round washer galvanized by hot dipped process. 2 Cement of 43 grade OPCin sealed bags each weighing 50 kgs.The date of manufacture of cement should not be more than one month prior to the date of delivery.Make- Ambuja/ Ultratech / ACC/JK Lakshmior Equivalent to IS 8112/1989 3 Clean coarse river sand conforming to IS 2116-1980 4 Aggregate 10-20mm graded confirming to IS 383-1970 5 Aggregate 20-40mm graded confirming to IS 383-1970 6 Broken Stone Boulders 100 to 300 mm size confirming to IS 383-1970 7 PCC solid bricks of size 230mm x115mm x75mm with minimum strength of M-15, Grade A, Quality conforming to IS 2185-2005 8 PVC pipe 75 mm dia 9 450 mm dia RCC NP-3 Hume pipe including rubber ring of same size with each pipeconforming to IS 458:2003 . 10 Provision of sign board glowing type fixed into frame made of stainless steel for op track. Length of pole to be fixed is 1.50 Mtr above GL and 0.50 Mtr below ground with cementcoping of PCC 1:2:4 following indication to be given:-(a) Start point, Length, Date of constr, Job No(Diagram attached with TS) x 01 No (b) Turn ahead x 05 Nos , (c)Speed limit (20 KM/Hr) x 02 Nos(d) END Point x 01 No 11 Supply of stores at NAUSHERA, Shifting of stores from FOR to worksite and construction of 3.20 Km Op Tr from Trg Area to Yellow Patch

Key Value

Document Fees
Refer document
EMD
INR 160000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail