Border Security Force-BSF has published Tender For Construction Of 04 Nos Corner Bunkers, 02 Nos 2 Men Bunker, Santry Post, Garrage Pol Store, Electric Sub Station, Pump Room And Gen Shed, Sarv Dharm Sthal Development Works At Bop Madanpur Aor Of 134 Bn Bsf Under Shq Bsf Silchar Mnc Ftr (S. Submission Date for this Tender is 24-05-2024. Bunker Tenders in Cachar Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Sub Heading 1 |
| 2 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm, FRLS PVC insulated, copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B |
| 3 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FRLS PVC insulated copperonductor single core cable for loop earthing as required. |
| 4 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 2 No 4 sq. mm FRLS PVC insulated copperconductor single core cable for loop earthing as required. |
| 5 | Wiring for circuit/ submain wiiring along with earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduitas required:(i)2 x 2.5 Sq mm + 1 x 2.5 Sq mm earth wire. |
| 6 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm |
| 7 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. i) 5/6 amps switch |
| 8 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 amp socket outlet |
| 9 | Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
| 10 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc. as required. |
| 11 | Supplying and fixing 20 Amps, 240 volts, SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alongwith 20 amp "C"Curve SP MCB in sheet steel enclosure on surface or in recess with chained metal cover for yhe socket outlet and complete with connections, testing and commissioning etc. as required. |
| 12 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) i) 6 way , Double door |
| 13 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) i) 12 way , Double door |
| 14 | Supplying and fixing 5 amps to 32 amps rating, 240 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i)Single Pole |
| 15 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amp |
| 16 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amp |
| 17 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 18 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 19 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 20 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 21 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 22 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connectionetc. as required. |
| 23 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 24 | Jointing G.I. tape (with another G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. |
| 25 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) |
| 26 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run) |
| 27 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. |
| 28 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. I) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 29 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.I) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 30 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. i) Upto 35 sq. mm |
| 31 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as requiredii) Above 35 sq. mm and upto 95 sq. mm |
| 32 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required. i) Upto 35 sq. mm |
| 33 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required. ii) Above 35 sq. mm and upto 95 sq. mm |
| 34 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of XLPEinsulated and PVC sheathedaluminum conductor cable of 1.1 KV grade as required. i)2 X 25 sq. mm (22mm) |
| 35 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of XLPEinsulated and PVC sheathedaluminum conductor cable of 1.1 KV grade as required. i)2 X 35 sq. mm (25mm) |
| 36 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of XLPEinsulated and PVC sheathedaluminum conductor cable of 1.1 KV grade as required. ii) 3½ X 50 sq. mm (32mm) |
| 37 | Providing, laying and fixing following dia G.I pipe (medium class) in ground complete with G.I fittings including tranching (75 cm deep) and re-filling etc as required. |
| 38 | Providing, Installation, testing and commissioning of 20 TO 24 wattpre-wired, LED tube fittings of all types, complete with all accessories i.e. ready to usedirectly fixed on ceiling/ wall/on existing downrods including connections with 3 x 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Havells (LHEXBLP7PN1W022)/ Philips/ CG or equivalent make |
| 39 | Providing and fixing stepped type deluxe electronic fan regulator on the existing switch box including connections etc. as required. Make Anchor-38660 or itsSSK/ Havells/ Philips |
| 40 | Providing, installation, testing and commissioning of ISI marked A.C. ceiling fan having double ball bearing along with 3 nos aluminium alloy blades, Canopy and300 mm down rods etc as required but without fan regulator. including wiring the down rod of standrad length (up to 30 cm) with 1.5 sqmm, FRLS PVC insulated, copper conductor, single core cable, etc. as required. (Make : CG-WW-HE or Equivalent Make of Bajaj,Havells, Orient Only1200 mm Sweep,White Colour |
| 41 | Providing and fixing fan box in round/ hexagonal shaped cast iron with 12 mm iron baretc. as required. |
| 42 | Providing and Fixing of300 mm Exhaust Fan metallic body and blades suitable for single phase,Rated Voltage (Volts) 230,Rated Frequency (Hertz) 50 . Make Havells- Ventil Air DSP or its equivalent of CG/Khaitan/Bajaj |
| 43 | Providing and fixing louvers, Shutters complete with frame for exhaust fan of 300 mm sweep etc. as required. |
| 44 | Providing & fixing of wall bracket lightfittingdirectly on wall i/c providing and fixing of LED of 10 wattas requiredLED ofmakePhilips/ Crompton / Havells and Wall bracketcompatible to Havells make city 3 or equivalent make of Philips/ Crompton |
| 45 | Providing and fixing of 45 watt LEDstreet light luminare having IP66 protection and impact resistance of IK07(HAVELLS Make ENDURA SUN DOWNSL45 W LED 765 PASY BOTG ) or its equivalent of CG/Philips/Bajaj with 32 mm dia x 1 meters long G.I (.medium duty) pipe brackets for fixing of street light fittings including bending the pipe to the reqd shape by mechanical means and grouting with 2 nos ,100 mm length GI nut & bolts with washers anchored in wallincluding fixing offitting so providedalong with lamp and wiringwith 1.5 sq. mm FRLS PVCinsulated copper conductor single core cable ( from ceiling rose to fitting), testing &commissioningetc as required. |
| 46 | Providing and fixing PVC batten/ angle holder along with 10 Watt LED lamp including connection etc. as required. Make- Anchor/Havells for holder and Havells/Philips/Osram |
| 47 | Providing and fixing of18 Watt round shaped surface mounted LED flat panel PDC aluminium housing type fitting on ceiling with all accessories i.e ready to use (Make Crompton-code-LSDSPLN-R-18-CDL or its equivalent of Havells/ Bajaj/ Philips) |
| 48 | Providing, installation, testing and commissioning of 400 mm sweep A.C. wall fan having inbuilt regulator and mounting arrangement for wall mounting etc as required. The wiring of fan should be donewith 1.5 sqmm, FRLS PVC insulated, copper conductor, single core cable, etc. as required. (Make :Havells model SwingFHWSWSTIVR16 or its equivalentto Crompton Greaves/ Havells/ Orient) |
| 49 | Providing installation testing & commissioning of CMRI certified LED flame proof 2X16/20 W LED tube light fixture suitable for applications with IP 65 protection complete with all accessories with 20W LED tube rod ready to use as required. (Make-CG/Bajaj/Havells/Phillips compatable to CG Model No. EXTN1LT8-16/20 |
| 50 | Providing of3.5 x 50 sq. mm XLPE insulated and PVC sheathed armored cable aluminium conductor 1.1 KV grade conf. to IS : 7098( Part 1)/ 1998 Havells/ Grandlay/ Polycab/ Gloster make |
| 51 | Providing of2 x 35 sq. mm XLPE insulated and PVC sheathed armored cable aluminium conductor 1.1 KV grade conf. to IS : 7098( Part 1)/ 1998 Havells/ Grandlay/ Polycab/ Gloster make |
| 52 | Providing of2 x 25 sq. mm XLPE insulated and PVC sheathed armored cable aluminium conductor 1.1 KV grade conf. to IS : 7098( Part 1)/ 1998 Havells/ Grandlay/ Polycab/ Gloster make |
| 53 | SITC of outdoor type double door distribution panel made out of2 mm thick CRCA Sheet of size 800 mmx 600 mmx 300 mm deep having 125 amp 4 nos aluminium bus bar and following accessories mounted thereon. The panel shall be openable from front side and also consists of angle iron frame of size 600 mm x 300 mm with 4 legs of600 mm long made out of 35 x 35 x 4 mm thick angle iron. The inside and outside painting should be done with super quality Smoke grey synthetic enamelled paint with two or more coats. i) MCCB4 pole 125 Amps25 KA, 415 volts50 Hz ofL&T/ Havells/ Siemens/ HPL Make - 1 Noii) 63 Amps Double pole MCB "C" Series 10 KA ( Make HPL/ Havells/ ABB/ C&S/ Anchor ) - 4 Nos.iii)63 Amps TPNMCB "C" Series 10 KA ( Make HPL/ Havells/ ABB/ C&S / Anchor )- 1 Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
