Tender For Rfq For Hunt Spares Under Pr 33392024 33390752 0001 0001 300893869 SPRING,COIL,MN:V980-399-223-5 Technical Details Name : Vinaykumar Shridhar Makde Contact : Email : Vinaykumar.Makde@amns.in 1 NO SPRING,COIL MAKE MODEL/BRAND:V980-399-223-5 , DRAWING DRG NO:V980-399-223 DRAWING REV NO:0 , APPLICATION AREA EQUIPMENT:CHECK VALVE MAKE NAME:HUNT VALVE Item Details : MATERIAL REQUIRE AS PER PO TEXT PERFORMANCE GARENTEE AND WARENTEE CERTIFICATE REQUIRE RELAVANT TEST CERTIFICATE REQUIRE Item Note : 2 33390752 0002 0002 300893728 SEAL,VLV,PN:V980-399-223-8 Technical Details Name : Vinaykumar Shridhar Makde Contact : Email : Vinaykumar.Makde@amns.in 10 NO SEAL,VALVE PARTS MATERIAL:H-URETHANE , ADDITIONAL INFORMATION:SEPARATOR SEAL APPLICATION AREA EQUIPMENT:CHECK VALVE , DRAWING REV NO:0 DRAWING DRG NO:V980-399-223 , MAKE PART NO:V980-399-223-8 MAKE NAME:HUNT VALVE Item Details : MATERIAL REQUIRE AS PER PO TEXT PERFORMANCE GARENTEE AND WARENTEE CERTIFICATE REQUIRE RELAVANT TEST CERTIFICATE REQUIRE Item Note : 3 33390752 0003 0003 300893677 SEAT,VLV,PN:V980-399-223-13 Technical Details Name : Vinaykumar Shridhar Makde Contact : Email : Vinaykumar.Makde@amns.in 1 NO SEAT,VALVE PARTS ADDITIONAL INFORMATION:SEAT - STELLITE HARDFACED STAINLESS STEEL APPLICATION AREA EQUIPMENT:CHECK VALVE , DRAWING DRG NO:V980-399-223 DRAWING REV NO:0 , MAKE PART NO:V980-399-223-13 MAKE NAME:HUNT VALVE Item Details : MATERIAL REQUIRE AS PER PO TEXT PERFORMANCE GARENTEE AND WARENTEE CERTIFICATE REQUIRE RELAVANT TEST CERTIFICATE REQUIRE Item Note : 4 33390752 0004 0004 300893724 POPPET,VLVPART,PN:V980-399-223-14 Technical Details Name : Vinaykumar Shridhar Makde Contact : Email : Vinaykumar.Makde@amns.in 1 NO POPPET,VALVE PARTS ADDITIONAL INFORMATION:POPPET - STELLITE HARDFACED STAINLESS STEEL APPLICATION AREA EQUIPMENT:CHECK VALVE , DRAWING DRG NO:V980-399-223 DRAWING REV NO:0 , MAKE PART NO:V980-399-223-14 MAKE NAME:HUNT VALVE Item Details : MATERIAL REQUIRE AS PER PO TEXT PERFORMANCE GARENTEE AND WARENTEE CERTIFICATE REQUIRE RELAVANT TEST CERTIFICATE REQUIRE Item Note : 5 33390752 0005 0005 300894267 SEAL,VLV,PN:V980-399-223-12 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 5 NO SEAL,VALVE PARTS MATERIAL:H-URETHANE , ADDITIONAL INFORMATION:SEAT SEAL H-URETHANE APPLICATION AREA EQUIPMENT:CHECK VALVE , DRAWING DRG NO:V980-399-223 DRAWING REV NO:0 , MAKE PART NO:V980-399-223-12 MAKE NAME:HUNT VALVE Item Details : MATERIAL REQUIRE AS PER PO TEXT PERFORMANCE GARENTEE AND WARENTEE CERTIFICATE REQUIRE RELAVANT TEST CERTIFICATE REQUIRE Item Note : 6 33390752 0006 0006 300894029 SEPARATOR,EQUIP,PN:V980-399-223-3 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 1 NO SEPARATOR,EQUIPMENT ADDITIONAL INFORMATION:SEPARATOR - 17-4 PH STAINLESS STEEL APPLICATION AREA EQUIPMENT:CHECK VALVE , DRAWING DRG NO:V980-399-223 DRAWING REV NO:0 , MAKE PART NO:V980-399-223-3 MAKE NAME:HUNT VALVE Item Details : MATERIAL REQUIRE AS PER PO TEXT PERFORMANCE GARENTEE AND WARENTEE CERTIFICATE REQUIRE RELAVANT TEST CERTIFICATE REQUIRE Item Note : Page 2 of 9 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112813 Date 17.05.2024 Submission Date 26.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Sarvesh Jayesh Gangar Contact Email sarvesh.gangar@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 7 33392024 0001 0007 300894171 SEAT,VLV,PN:V600-430-02-6,NICKELBOUNDTU Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 1 NO SEAT,VALVE PARTS MATERIAL:NICKEL BOUND TUNGSTEN CARBIDE , DRAWING DRG NO:V600-430-02 DRAWING REV NO:0 , MAKE PART NO:V600-430-02-6 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE MAKE NAME:HUNT VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of all supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : 8 33392024 0002 0008 300894358 SEPARATOR,EQUIP,PN:V600-430-02-13 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 1 NO SEPARATOR,EQUIPMENT ADDITIONAL INFORMATION:MATERIAL - MANGANESE BRONZE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 MAKE PART NO:V600-430-02-13 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE MAKE NAME:HUNT VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : Page 3 of 9 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112813 Date 17.05.2024 Submission Date 26.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Sarvesh Jayesh Gangar Contact Email sarvesh.gangar@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 9 33392024 0003 0009 300894923 O-RING,SEAL,PN:5308T282,NBR Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 10 NO O-RING,SEAL MATERIAL:NITRILE,BUNA-N , MAKE PART NO:5308T282 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 MAKE NAME:HUNT VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : 10 33392024 0004 0010 300894830 O-RING,SEAL,PN:95452K408 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 10 NO O-RING,SEAL MAKE PART NO:95452K408 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 MAKE NAME:HUNT VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : Page 4 of 9 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112813 Date 17.05.2024 Submission Date 26.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Sarvesh Jayesh Gangar Contact Email sarvesh.gangar@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 11 33392024 0005 0011 300895226 RING,VLV,PN:V600-430-02-8 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 6 NO RING,VALVE PARTS MAKE PART NO:V600-430-02-8 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 MAKE NAME:HUNT VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : 12 33392024 0006 0012 300895551 O-RING,SEAL,PN:5308T193 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 6 NO O-RING,SEAL MAKE PART NO:5308T193 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 MAKE NAME:HUNT VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : Page 5 of 9 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112813 Date 17.05.2024 Submission Date 26.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Sarvesh Jayesh Gangar Contact Email sarvesh.gangar@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 13 33392024 0007 0013 300895214 SEAL,VLV,PN:V600-430-02-14 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 6 NO SEAL,VALVE PARTS MAKE PART NO: V600-430-02-14 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 , MAKE NAME:HYDAC Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : 14 33392024 0008 0014 300894927 O-RING,SEAL,PN:5308T53 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 10 NO O-RING,SEAL MAKE NAME:HUNT VALVE , MAKE PART NO:5308T53 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : Page 6 of 9 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112813 Date 17.05.2024 Submission Date 26.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Sarvesh Jayesh Gangar Contact Email sarvesh.gangar@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 15 33392024 0009 0015 300895224 RING,VLV,PN:H287-900 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 12 NO RING,VALVE PARTS MAKE PART NO:H287-900 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 MAKE NAME:HUNT VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : 16 33392024 0010 0016 300895328 SEAL,VLV,PN:V600-430-02-17 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 6 NO SEAL,VALVE PARTS ADDITIONAL INFORMATION:UPPER POPPET SEAL - UHMW MAKE PART NO:V600-430-02-17 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 MAKE NAME:HUNT VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : Page 7 of 9 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112813 Date 17.05.2024 Submission Date 26.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Sarvesh Jayesh Gangar Contact Email sarvesh.gangar@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 17 33392024 0011 0017 300895814 SEAT,VLV,PN:V600-430-02-10 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 4 NO SEAT,VALVE PARTS ADDITIONAL INFORMATION:POPPET SEAT - NICKEL BOUND TUNGSTEN CARBIDE APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 MAKE PART NO:V600-430-02-10 , MAKE NAME:HUNT VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : 18 33392024 0012 0018 300894925 SEAL,VLV,PN:V600-430-02-19 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 10 NO SEAL,VALVE PARTS MAKE PART NO:V600-430-02-19 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 MAKE NAME:HUNT VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : Page 8 of 9 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112813 Date 17.05.2024 Submission Date 26.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Sarvesh Jayesh Gangar Contact Email sarvesh.gangar@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 19 33392024 0013 0019 300895220 RING,VLV,PN:V600-430-02-20 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 6 NO RING,VALVE PARTS MAKE PART NO: V600-430-02-20 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 MAKE NAME:HUNT VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : 20 33392024 0014 0020 300894966 ROD,COUPLING,PN:V600-430-02-22 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 1 NO ROD,COUPLING MAKE PART NO: V600-430-02-22 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE DRAWING DRG NO:V600-430-02 , DRAWING REV NO:0 MAKE NAME:HUNT VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of al supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : Page 9 of 9 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112813 Date 17.05.2024 Submission Date 26.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Sarvesh Jayesh Gangar Contact Email sarvesh.gangar@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 21 33392024 0015 0021 300900236 BODY,VLV,PN:V600-430-02-12 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 1 NO BODY,VALVE PARTS ADDITIONAL INFORMATION:POPPET BODY - 17-4 PH S.S. MAKE PART NO:V600-430-02-12 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE MAKE NAME:HUNT VALVE , DRAWING DRG NO:V600-430-02 DRAWING REV NO:0 Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of all supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing. Item Note : 22 33392024 0016 0022 300902645 BOLT,ALLN,PN:V600-430-02-9 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 5 NO BOLT,ALLEN DRAWING DRG NO: V600-430-02 , DRAWING REV NO:0 MAKE NAME:HUNT VALVE , MAKE PART NO:V600-430-02-9 APPLICATION AREA EQUIPMENT:MINIMUM FLOW BYPASS VALVE Item Details : 1 - Material must be as per PO text/Drawings only. Material require as per PO only any deviation in the MOC after PO placement PO shall lead for rejection of the materials. 2 - If any changes in dimension or material should inform before manufacturing and manufacturing to be done after approval from AMNS. 3 - material code and PO number must mentioned in all Test reports and Invoice. 4 - Fitment and performance guarrantee certificate required of all supplied spares. 5 - In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6 - In case of any query vendor must to discuss with the site or may visit the site for technical discussion before submitting offer or manufacturing. 7 - Materials should be as per given standard, class, grade. 8 - all relevant reports must be submitted prior to dispatch of material for DCC. (i.e. UT, DP, MTC, Dimensional reports, hardness, heat treatment etc) 9 - QAP and Drawings approval to taken where ever applicable prior to manufacturing.
