Military Engineer Services-MES has published Tender For Repair And Replacement Of Roof Sheets, False Ceiling, Wall Paneling, Roof And Roof Treatment, Rcc Parapet Wall And Leakage/Seepage At Afs Bihta. Submission Date for this Tender is 05-06-2024. Shed Construction Tenders in bihta Bihar. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| BOQ_732604.xls | Tender Document | 0 KB |
| TenderDocs8408.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| ed408318-76d7-4030-a9a1-1e13bb8d5cd7.html | Tender Notice | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital orsimilar pattern roof covering, in wall clading and valley gutters, complete all as specified and directed. |
| 2 | S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. |
| 3 | S&F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet crimped eaves and steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. |
| 4 | Dismantling wall/ceiling boards (fibre pulp insulation etc.) or insulations boards/slabs/blankets of any thickness incl aluminium /GI snap grid of any description, complete all as specified and directed. |
| 5 | Cutting holes in brick walls exc. half brick but n.exc one brick thick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required for fixing false ceiling MS angle frame work, complete all as specified and directed. |
| 6 | S&F Rolled sections as frame/grid work for false ceilings and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates Fe-410- W(GdeE-250) quality B complete all as specified and directed. |
| 7 | M&L for 6 mm thick Plywood, grade BWR, type BB, fixed with screws in ceilings, flat or sloping, complete all as specified and directed. |
| 8 | S&F anodised powder coated GI snap grid frame work for false ceiling including perimeter channel and hanger 6mm dia GI (upto 1200 mm length), complete all as specified and directed. |
| 9 | Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturer instructions, complete all as specified and directed. |
| 10 | S&F wall panelling ofPVC foam profile having 100 mm to 200 mm wide tongue and groove 4 mm thick panels with 12 mm thick ribs of approved shade and pattern. Framing shall be made from solid PVC foam batten of size 35 mm x 17 mm, placed horizontally at 45 cm c/c with solid PVC foam corner all around, fixing shall be done with csk screw of size 19 mm x 6 mm including necessary sealant etc, complete all as specified and directed as per manufacturer"s instructions and design/colour as approved by the GE. Make- Accucel or equivalent as approved by GE |
| 11 | M&L for preparing new surfaces of wood of any description not otherwise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 12 | Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creoste oiling on back side of plywood, complete all as specified and directed. |
| 13 | M&L for preparing new surfaces of steel of any description not otherwise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 14 | Dismantling / taking out of existing roof treatment in roofs any thickness including plastering, concrete padding including brick tiles or terracing tiles (Brick tiles shall be dismantled along with mud phuska) (whether full thickness removed or part there of) any description on horizontal and vertical surface and removed spoil / rubbish out side of MD land. Note :-The surface shall be wire brushed and cleaned to receive the PCC padding. |
| 15 | M&L for cement concrete type B1, 1:2:4 (using 20mm graded stone aggregates) as levelling course in roof tops for roof treatment, complete all as specified and directed. |
| 16 | M&L for rendering 10mm thick in CM 1:3 on concrete surfaces / slabs finished even and smooth without using extra cement with admixture of integral water proofing compound @ 3% by weight of cement for filling depressions if any to receive water proofing treatment (WPC shall be measured & paid seperately), complete all as specified and directed. |
| 17 | Supply only approved ISI marked integral water proofing compound, complete all as specified and directed. |
| 18 | Applying evenly @ 0.30 ltr per Sqm of bitumious primer over plastered suraces of Roof surfaces, complete all as specified and directed. |
| 19 | M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces, complete all as specified and directed. |
| 20 | S&F polymeric water proofing membrane consisting of 90 to 100 micron thick central core of HMHDP film and minimum weight 3kg/sqm shall be laid with 100mm side lap/end lap over hot bitumen on prepared surface all as per manufacturers instruction and under supervision of manufacturers technical representative, complete all as specified and directed. |
| 21 | M&L 40mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement over 20 mm thick screed bed of cement mortar in CM 1:4 with WPC as per manufacturer"s instructios, complete all as specified and directed. (Note :- WPC shall be measured and paid separatly) |
| 22 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 23 | M&L for Rendering 15 mm thick in CM 1:4 on Brick / concrete surfaces as in walls finished even and smooth without using extra cement including mixing water proofing compound @3% by weight of cement, complete all as specified and directed. (Note :- WPC shall be measured and paid separatly) |
| 24 | M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint, complete all as specified and directed. |
| 25 | M&L for preparation of new plastered surface of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (compony Depot Tinted) with silicon adhesives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm, complete all as specified and as directed. Note:- Shade and pattern of the colour to be approved by GE. |
| 26 | Taking up or down steel tubes and connections including cleaning for refixing or removal to store, bore of pipe 15mm, complete all as specified and directed. |
| 27 | Taking up or down steel tubes and connections including cleaning for refixing or removal to store, bore of pipe 20mm, complete all as specified and directed. |
| 28 | M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm, complete all as specified and directed. |
| 29 | M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 20mm, complete all as specified and directed. |
| 30 | Dismantling water tanksof capacity exc 250 ltrs but n.exc. 500 ltrs and removing to store, complete all as specified and directed. |
| 31 | Dismantling water tanks of capacity exc 500 ltrs but n.exc. 1000 ltrs and removing to store, complete all as specified and directed. |
| 32 | S&F rotational moulded polyethylene water storage tanks three layers white in colour 500 ltr capacity, cylindrical vertical with closed top, hoisted and fixed in position, complete all as specified and as directed. |
| 33 | S&F rotational moulded polyethylene water storage tanks three layers white in colour 1000 ltr capacity, cylindrical vertical with closed top, hoisted and fixed in position, complete all as specified and as directed. |
| 34 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position for 500 ltr capacity tanks including cleaning and removing all scale and dirt from tank and mouth of circulating pipe, complete all as specified and directed. |
| 35 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position for 1000 ltr capacity tanks including cleaning and removing all scale and dirt from tank and mouth of circulating pipe, complete all as specified and directed. |
| 36 | S&F in repair 20 mm dia float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm - 142 gms / 20mm -210 gms / 25mm - 455 gms /40 mm - 690 gms / 50 mm - 1240 gms), complete all as specified and directed. |
| 37 | S&F in repairs gun metal globe or gate valves of20mm dia pipes with iron wheel head screwed both ends for iron pipe or for unions etc. complete all as specified and as directed by engr-in-charge. |
| 38 | Demolition and breaking up drain pipes and fittings, salt glazed ware, AC, PVC or RCC, internal dia of pipe 110 mm, complete all as specified and directed. |
| 39 | S&F for PVC (SWR) pipe of 110 mm bore single socketed in any length with rubber ring joint, fixed to wall, complete all as specified and directed. |
| 40 | S&F PVC (SWR) bend 110 mm bore, any radius, incl jointing to waste pipe with solvent cement, complete all as required and as directed. |
| 41 | S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required for clamps of pipe, complete all as specified and directed. |
| 42 | M&L cuting "V" grooves in brickwalls / stone masonry / RCC 75mm wide and 20-30mm deep and filling with cement mortar 1:3 mixed with WPC on vertical surfaces as directed for fixing the edges of water proofing membrane, complete all as specified and directed. |
| 43 | Demolition of brick work or stone boulder masonry built in cement mortar including all arches, pillars etc incl removal of demolished materials n.exc 50 Mtr etc complete all as specified and directed. |
| 44 | M/L for brick workwith sub class "B" brick straigthor curved on plan exc. 6.0m mean radius, built in CM 1:6, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
