|
| 1 | Dismantling asbestos cement (corrugated/semi corrugated) in roof coverings, etc including ridges, claddings, etc. including all necessary staging / scaffolding, etc. as required and disposing off complete all as specified and as directed |
| 2 | Dismantling rusted / damaged sheeting any type, any gauge or thickness, corrugated / plain as in roof coverings, wall cladding, chajjas, etc. including all necessary staging / scaffolding, etc. as required and disposing off complete all as specified and as directed |
| 3 | Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed |
| 4 | Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed |
| 5 | Demolition of reed lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed |
| 6 | Dismantling mild steel work or wraught iron of any description and in any position complete all as specified and as directed |
| 7 | Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc. or insulation boards/slabs/blankets, any thickness including cover fillets, frameworks, etc. and disposing off complete all as specified and as directed |
| 8 | Dismantling timber scantlings 40sqcm and over in section, in any position and disposing off complete all as specified and as directed |
| 9 | Taking up/down PVC pipes 110/150mm of any pattern and from any locations and disposing off complete all as specified and as directed |
| 10 | M&L for brickwork with sub-class \"B\" bricks, straight or curved on plan to any radius built in CM (1:6) complete all as specified and as directed |
| 11 | M&L for brickwork with sub-class \"B\" bricks, straight or curved on plan to any radius as in half brick thick walls built in CM (1:4) complete all as specified and as directed |
| 12 | M&L for rendering 15mm thick in cement mortar (1:4) on one side of lathing finished even and smooth without using extra cement complete all as specified and as directed |
| 13 | M&L for rendering 10mm thick in cement mortar (1:6) on other side of lathing finished even and smooth without using extra cement complete all as specified and as directed |
| 14 | M&L rendering 15mm thick, in cement mortar (1:6) on brick walls / concretesurfaces, etc. finished even and fair without using extra cement complete all as specified and as directed |
| 15 | M&L rendering 15mm thick, in cement mortar (1:4) on brick walls / concretesurfaces, etc. finished even and smooth without using extra cement complete all as specified and as directed |
| 16 | S&F for GI wire netting 0.71mm dia and 12mm mesh lathing to wood or metal studding joints, etc. in walls, ceiling stanchion, beams, etc. including all laps cutting and wastes complete all as specified and as directed |
| 17 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 complete all as specified and as directed |
| 18 | S&F bands, straps, hold fasts, wall ties, cleats, supports or stays of RWPs, ventilation pipes and similar articles of mild steel conforming to Fe-290 grade E-165 including bolts as required complete all as specified and as directed |
| 19 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 5cm in length, dia of neck & shank 11 to 15mm complete all as specified and as directed |
| 20 | M&L for 2nd class hard wood timber scantling, clean sawn in unframed works and fixed complete all as specified and as directed |
| 21 | M&L for preparation of new plastered surfaces and applying two coats of oil emulsion distemper over a coat of wall primer including all necessary staging, scaffolding, etc. as required to work at heights, etc. complete all as specified and as directed |
| 22 | M&L for preparation of new plastered surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungus resistant, dirt resistant, exterior paint (of approved tint, company depot tinted) with silicon additives @1.43litre/10sqm over a priming coat of exterior primer applied @0.90litre/10sqm complete all as specified and as directed |
| 23 | M&L for preparing of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of wall primer complete all as specified and as directed |
| 24 | M&L for preparing of new steel / metal surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed |
| 25 | M&L for preparing of new wood / wood based surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, tint as approved complete all as specified and as directed |
| 26 | S&F pre-painted galvalume aluminum zinc coating GI based corrugatedsteel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed |
| 27 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed |
| 28 | S&F false ceiling with fully perforated 12mm thick micro tegular edge of 10mm thick square at all heights with glass reinforced gypsum ceiling tiles of size 595x595mm, if approved texture, pattern and design having moisture content less than 2%, humidity resistance 99%, NCR (0.75 to 1) as per IS-8225:1987 (updated till date), nn-combustible as per BS: 475 (Part-IV) 1970 (updated till date), reflectance minimum 85% when laid truely horizontal level, suspended from interlocking \"T\" grid of hot dipped galvanized (galvanized @120gm/sqm) iron section 0.33mm thick, network comprising of main T runner of size 32x15mm 3000mm long, cross T of size 32x15mm 1200mm long, secondary intermediate cross T of size 32x15mm 600mm long, forming grid size of 600x600mm duly suspended from soffits of slab with galvanized (galvanized @80gm/sqm) iron wire 8mm outer dia, 50mm long, alongwith 6mm dia fully threaded hanger rods upto 1000mm length, L shaped adjusters of size 85x25mm GI perimeter angle of size 24x24x0.4mm 3000mm long, fixed with anchor fastners @450mm c/c and 40mm long dry wall screws complete all as per drawings, as specified and as directed |
| 29 | S&F PVC (SWR) pipes, 150mm dia, single socketed in any length with rubber ring joints fixed to walls, etc. for eves gutter as required complete all as specified and as directed |
| 30 | S&F PVC (SWR) bends, 150mm dia, ISI marked, any radius with rubber ring joints, etc. complete all as specified and as directed |
| 31 | S&F PVC (SWR) tee, 150mm dia, ISI marked, any radius with rubber ring joints, etc. complete all as specified and as directed |
