Military Engineer Services-MES has published Tender For Special Repair To Bldg No Pfs33 P 32 And T Ops 147 At Mil Stn Gandhidham Under Ge A Bhuj. Submission Date for this Tender is 03-06-2024. Building Work Tenders in bhuj Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-05-2024 |
| 2 | 28-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-06-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling of water tanks and removing to store having Capacity of Exc 500 litres and n exc1000 litres complete all as specified and directed. |
| 2 | M & L for screed bed of mortar 15 mm thick in cement mortar 1:4 for laying APP membrane and including mixing water proofing compound as per manufactureres instructions complete all as specified and directed. Note :- Water proofing compound shall be measured and paid for seperately under appropriate item of Sch "A" as supply only complete all as specified and directed. |
| 3 | Supply only Liquid water proofing compound all as specified and directed. |
| 4 | M & L for brushing neat cement slurry with 3.0 kg of cement per square metre complete all as specified and directed. |
| 5 | M & L in repairsfor preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles andapplying one coat of bituminous primer @ 200 gms per sqm and then laying 3 mm thick APP modified bituminous membrane weighing not less than 3.50 kg/sqm reinforced weighing not less than 160 gms/sqm laid by torch application method overlap while torching shall be 75 mm on length and 100 mm width side, all angles & bituminous should sealed with extra care to ensure full bondage all joints and changes should covered with CM 1:3 with water proofing chemical as per manufacturer"s instructions and cured well before laying membrane etc and applying aluminium paint @ 100 gram / sqm on roof or vertical surfaces complete all as directed. |
| 6 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & as directed. |
| 7 | Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing off rubbish off the premises of cantonment complete all as specified and directed. |
| 8 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 9 | M & L for 100 mm thick PCC 1:3:6 type C-2 (40 mm graded stone aggregate) as in sub base and all other similar works complete all as specified and directed. |
| 10 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete allas directed. |
| 11 | M & L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 12 | M & L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm,n vertical surfaces such as skirtings, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 13 | M & L for coloured joint free non skid tiles 7 to 8 mm thick (Square / Rectangular) area of each tileexceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and directed. |
| 14 | M & L for coloured joint free non skid tiles 7 to 8 mm thick (Square / Rectangular) area of each tileexceeding 0.11 sqm but not exceeding 0.18 sqm as in vertical surfaces such as skirtings, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and directed. |
| 15 | M & L for coloured Glazed ceramic tiles in vertical surface area exc 0.06 Sqm andn exc 0.18 Sqm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed. |
| 16 | M & L for Non Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tileexceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and directed. |
| 17 | M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6)for laying floor finishes like tiles etc complete all as specified and directed. |
| 18 | M & L for rendering 10 mm thick in CM (1:4) on fair faces of brick workcomplete all as specified and directed. |
| 19 | S & F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white,including trap and connection to drain and flushing pipe (excluding flushing cistern)including seat cover with flat bottom and mild steel chromium plated or aluminium hinging devices for pedstal pan complete. |
| 20 | S & F in repairs vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets,complete all as specified and directed. |
| 21 | S & F in repairs 10 litre capacity PVC low level flushing cisternwith all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. |
| 22 | S & F in repairs PVC connection 15mm size PTMT nuts of length 450 mm. |
| 23 | S & F in repairs 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions . |
| 24 | S & F in repairs of two way angle cock chromium plated fancy type 15 mm bore complete all as specified and directed. |
| 25 | S & F in repairs of two way bib cock chromium plated fancy type 15 mm bore complete all as specified and directed. |
| 26 | S & F in repairs 15 mm bore fancy type bib taps long bodycast copper alloychromium plated, screwed down, screwed for iron pipe or for brass ferrule. |
| 27 | S & F in repairs to health faucet with 1200 mm long flexible mild steel tube 80 mm dia with wall hook complete all as specified and directed. |
| 28 | S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screwscomplete all as specified and directed. |
| 29 | S & F in repairs acrylic shelfhaving size of 56 cms x 13 cms with chromium plated bracketbelow WHB mirror complete all as specified and directed. |
| 30 | S & F in repairs grating round 150mm size of PTMT (minimum 100 gms) with waste hole of PTMT complete all as specified. |
| 31 | S & F in repairs 15 mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type, high pressure, with or without lettred "HOT or COLD" with long screwed sunk and fly nuts. |
| 32 | S & F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges brass chromium plated complete all as specified and directed. |
| 33 | S & Fin repairs CP Towel Ring round with round flange and not less than280 gms complete all as specified and directed. |
| 34 | S & F in repairs CP Toilet Paper holder all as per cat part complete all as specified and directed. |
| 35 | S & F in repairs 5 mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection mm thick of size 800 x 600 mm bevelled edge mirror of selected quality glass having decorative PU frame and fixed to walls using hidden studs complete all as specified and directed. |
| 36 | Taking up or down steel tubing / CPVC Pipes and connection including cleaning for refixing or removed to storeDia : 20 mm bore |
| 37 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified & directed Dia : 20 mm bore |
| 38 | Demolition and breaking up drain pipes upto 100/110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed |
| 39 | Demolition and breaking up drain pipes upto 75 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed |
| 40 | Supply and fixing of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with suitable clamp complete all as specified and as directed. |
| 41 | Supply and fixing of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with suitable clamp complete all as specified and as directed. |
| 42 | Supply and fixing of PVC (SWR) junction single, (single T) equal or unequal provided with access door suitable for 110mm bore PVC pipes complete all as specified and as directed. |
| 43 | Supply and fixing of PVC (SWR) bends any radius suitable for 110mm bore PVC pipes with access door complete all as specified and as directed. |
| 44 | Supply and fixing of PVC (SWR) bends any radius suitable for 75mm bore PVC pipes with access door complete all as specified and as directed. |
| 45 | Supply and fixing of PVC (SWR) vent cowl for 110mm bore PVC pipes complete all as specified and as directed. |
| 46 | Supply and fixing of PVC (SWR) WC connector bent type for 110mm bore PVC pipes complete all as specified and as directed. |
| 47 | Supply and fixing of PVC (SWR) for 75mm Diameter of outlet floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed. |
| 48 | Supply and fixing of PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed. |
| 49 | S & F for 1000 ltrs capacity rotational moulded polyethelene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. |
| 50 | S & F in repairs 20 mm bore dia gun-metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 51 | S & F in repairs 20 mm bore ball brass valves,high pressure,with polythene float and flunut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified. |
| 52 | Taking down of chowkhats / frames n exc 1.50 sqm each without taking off shutter eachcomplete all as specified and directed. |
| 53 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 54 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings of any height complete all as specified and directed. |
| 55 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified. |
| 56 | Supply & fixfactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top andbottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile "C" channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer"s instructions and drawings as shown in SSR Part-I 2009 complete all as specified. |
| 57 | Dismantling of structural steel work including doors, gates but excluding framed truss etc. |
| 58 | M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410-W (Gde-E-250) quality-A. |
| 59 | S & F of 1.00 mm thick MS plain, black sheet in wall cladding , steel gates and all othersimilar work complete all as specified and directed. |
| 60 | M & L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome complete all as specified and directed. |
| 61 | Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling and disposing off rubbish) off the premises of cantonment complete all as specified & as directed. |
| 62 | M & L for precast cement concrete block masonry with solid blocks exc 10 cm in width and set and jointed in C M 1:6 having ratio of PCC 1:3:6 type C1 (using 20mm graded stone aggregate as directed complete all as specified and directed. |
| 63 | Taking down cement plaster ofany description from brickwall or concrete surfaces including racking out joints and hacking for key, scrubbing down with water etc complete all as directed. |
| 64 | M & L for 15 mm thick plaster in CM(1:6) on brick work / RCC concrete surfaces of wall and finish the surface even and smooth without using extra cement complete all as specified and directed. |
| 65 | M & L for preparation of newly plastered wall surfaces and Providing and applying 3mm thick wall care putty on wall to prepare the surface even and smooth.and Material and labour for two coats of distemper oil emulsion white or tinted including priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed by Engr-in -Charge. |
| 66 | M & L for 5 mm thick plaster in CM(1:3) on brick work / RCC concrete surfaces of ceilings complete all as specified and directed. |
| 67 | M & L for preparation of newly plastered ceilingsurfacesand applied three coats of white wash complete all as specified & directed. |
| 68 | M & L for rendering 15 mm thick in CM 1:4 on concrete / fairsurfaces of block masonary and including mixing water proofing compound as per manufactureres instructions and finished even and smooth without using extra cement complete all as specified and directed. Note :- Water proofing compound shall be measured and paid for seperately under appropriate item of Sch "A" as supply only |
| 69 | M & L for preparation of newly plastered wall surfaces and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 70 | S & F of structural steel work in tubular / square tubular trusses including special shaped washer, gusset/bearing plate etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed. |
| 71 | Complete removal of existing treatment on wall (any number of layers) by scarping with steel scrapersor any other mean and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 72 | Complete removal of existing treatment on wall (any number of layers) by scarping with steel scrapersor any other mean including filling depressions of scrapped surface with putty and Providing and applying 3mm thick wall care putty on wall to prepare the surface even and smooth.and Material and labour for two coats of distemper oil emulsion white or tinted including priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed by Engr-in -Charge. |
| 73 | Taking down of chowkhats / frames n exc 1.50 sqm each without taking off shutter eachcomplete all as specified and directed. |
| 74 | Taking down of chowkhats / frames exc 1.50 Sqm but n exc 4.0 sqm each without taking off shutter eachcomplete all as specified and directed. |
| 75 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 76 | S & F for joist, channel, angle or tee sections, or MS Flats fixed independantly without connecting plates,etc Fe 410-W (Gde-E- 250) quality - A (cut to ordinary lengths i.e within 20mm of lengthindicated) as in frame work for Galvalume / CGI chajjas complete all as specified and directed. |
| 77 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 78 | S & F of 5.5mm thick Sheet glass, ordinary quality and glazing sheet glass is ground or obscured or frosted, on one side with oil putty in square n exc 0.5 sq. m in each pane complete all as specified. |
| 79 | Supplying and fixing in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 80 | S & F of aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed. |
| 81 | S & F of 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C"-22 complete all as specified and directed. |
| 82 | S & F of 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 83 | S & F of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 84 | S & F in repairs to Harrison rails (Curtain Rails / Rod), anodised aluminium alloy, powder coated with fixing brackets, stops, rollers etc rate inclusive of brackets as per requirement complete all as specified and directed. |
| 85 | Supply & fix of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as directed by manufacturer on steel membersincluding scaffoldings of any height complete all as specified and directed. |
| 86 | Preparation of old decoratedsurface of ceiling and including cornices plastered or unplastered surfaces bybrooming down or steel wire brushing toremove all loose scales, and foreign materials scarping down, smoke soot moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash on ceiling surface complete all as specified and directed by Engr-in-Charge. |
| 87 | M & L for preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 88 | Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing off rubbish off the premises of cantonment complete all as specified and directed. |
| 89 | S & F in repairs aluminium (extruded section) body door closer hydraulically regulated designation No 3, universal type,suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg complete all as specified and directed. |
| 90 | M & L for cement concrete type C-2, 1:3:6 (40mm graded aggregate), 75mm thick. as in plinth protection finished even and smooth without using extra cement including expansion joints complete all as specified. |
| 91 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings of any height complete all as specified and directed. |
| 92 | Supply & fix of Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as directed by manufacturer on steel membersincluding scaffoldings of any height complete all as specified and directed. |
| 93 | Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed. |
| 94 | Provding and fixing of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges "of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre ton centre. complete all as specifed and directed. |
| 95 | Providing and fixing of 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh .complete all as specifed and directed. |
| 96 | M & L forpreparation of newly ceiling POP surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paintcomplete all as specifed and direcetd. |
| 97 | S & F of aluminium handle 150 mm cast type anodised complete all as specified and directed. |
| 98 | Taking Down of any type of Door Shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed. |
| 99 | S & F of Factory made wire gauzed PVC door shutter 30 mm thick,i.e. panel will be of wire gauzed in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly(style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet and PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheetfor top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 Deg) used instead of exposed portion of PVC sheet beading. suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 100 | S & F of30 mm thick flush shutter, solid core construction,with block board core and plywood face panel, commercial type on both sides complete all as specified and directed. |
| 101 | S & F of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steelwire staples complete all as specified and directed. |
| 102 | Taking up or down steel tubing / CPVC Pipes and connection including cleaning for refixing or removed to store, (a)16 mm dia bore |
| 103 | (b) 20 mm bore |
| 104 | (c) 25 mm bore |
| 105 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & directed of following outer diameter sizes :-(a) 16 mm dia bore |
| 106 | (b) 20 mm Outer Dia |
| 107 | (c) 25 mm Outer Dia |
| 108 | S & F as in repair 15 mm bore Stop valves (Angle Cock), fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 109 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete and directed. |
| 110 | S & F in repairs 15 mm bore overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long(light weight) round shape with wall flange complete all as specified & directed. |
| 111 | S & F in repairs 15 mm bore two way Bib tap with wall flange of fancy type, chromium plated,screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed. |
| 112 | S & F as in repair PVC (SWR) multi floor trap having 75mm diameter of outlet with grating including jointing with solvent cement complete all as specified & directed. |
| 113 | S & F in repairs 5 mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection mm thick of size 450 x 600 mm bevelled edge mirror of selected quality glass having decorative PU frame and fixed to walls using hidden studs complete all as specified and directed. |
| 114 | S & F in repairs of PTMT Mirror cabinet of size 600 x 450 x 200 mm with all necessary arrangements for fixing to walls |
| 115 | M & L for Preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 116 | Taking down of Wall panelling and similar work complete all as specified and as directed. |
| 117 | S & F of Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 118 | S & F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 119 | S & F of mild steel Fe 410-W (Grade-Fe 250) quality A of Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and directed. |
| 120 | S & F in repairs 25 mm bore dia gun-metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 121 | S & F in repairs 25 mm bore ball brass valves,high pressure,with polythene float and flunut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified. |
| 122 | Dismantling of fencing wire mesh any type complete all as specified & directed. |
| 123 | M & L for cement concrete type D2 1:4:8 (40mm gradedaggregates) in foundation filling and mass concrete complete all as specified & directed . |
| 124 | M & L for Mild steel angle, flat work as in posts and struts in fencing including cutting tops to shape as directed, drillingholes, notching for wireetc., flat iron fillets (for securing wiremesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe-290-Gde E-165 complete all as specified & directed. |
| 125 | Supply only of Mild Steel in flat, Round or Square bars, in available length for fixing of chain link fencing having quality Fe 410-W (Gde-E-250) Quality-A complete all as specified & directed. |
| 126 | S & F of 5 to 10 mm dia MS screw bolts (machine made) with hexagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nutlength of bolt& n.exc 5 cm longcomplete all as specified & as directed. |
| 127 | Supply only chain link MS galvanised fencing of 100mm x 100mm mesh and dia of wire 3.15mm complete all as specified & directed. |
| 128 | Fixing of chain link fencing incl line wires any mesh size & type to any type of standards rails, straining bolts etcincluding provision of line wire complete all as specified & directed. |
| 129 | M & L for preparation of steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified & directed. |
| 130 | S & F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) |
| 131 | M & L for preparation of steel surfaces of any description n exc 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified & as directed. |
| 132 | Taking down of Wall panelling and similar work complete all as specified and as directed. |
| 133 | S & F of Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 134 | S & F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 135 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings of any height complete all as specified and directed. |
| 136 | Supply & fix of Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as directed by manufacturer on steel membersincluding scaffoldings of any height complete all as specified and directed. |
| 137 | Excavating in post holes (or similar holes) in soft / loose type of soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed |
| 138 | M & L for PCC Type D2 1:4:8 (40mm graded aggregates)as in foundation, filling and mass concrete complete all as specified and directed. |
| 139 | Demolition of ceiling boards of any description and any thickness including cover fillets and frame work complete all as specified and directed. |
| 140 | M & L for Anodised aluminium snap grid having Size of grid 605 x 605mm frame work for false ceiling all as specified complete all as specified and directed. |
| 141 | S & F of 9mm thick PVC laminated gypsum ceiling tiles size of 600mm x 600mm, square edge, front side laminated PVC and back side aluminium foil complete all as specified and directed. (Frame work for ceiling shall be measured and paid separately). |
| 142 | Demolition of precast concrete block walling and similar items i.e. ashlar facing dressing stone work, precast concrete articles etc of any description and in any position built in cement mortar including all quoins, arches and pillars etc. complete all as specified & as directed. |
| 143 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 144 | M & L Point wiring for one light/fan point controlled by one modular switch, one way switch byusing 1.5 Sq mm nominal cross sectional area multistrandedcopperconductor, PVC insulated unsheathed FRLS cables in and including PVC casing & capping with all accessories/ fittings, modular metal flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall/panel surface as existing colour and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing good surfaces of walls, panels, floors etc. complete all as specified and as directed by Engineer-in- Charge. |
| 145 | M & L Point wiring for 15 amps socketpoint controlled by one, one way switch using 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLSunsheathed cables in and including PVC casing & capping with all accessories /fittings, modular metal flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall/panel surface as existing colour and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing good surface of walls, panels, floors etc. complete all as specified and as directed by Engineer-in- Charge. |
| 146 | All as per Sl item No141above but for one socket outlet point 5 amps on independent board controlled by one, one way switch. |
| 147 | All as per Sl item No 141abovebut for one socket outlet point on the same baord with other switches. |
| 148 | S & F Modular switch 1 way 6A, 1 module of sigle pole , ,complete all as specified and as directed by Engineer-in- Charge. |
| 149 | S&F Modular switch 1 way 16A, 1 module of single pole, ,complete all as specified and as directed by Engineer-in- Charge. |
| 150 | S&F Modular switch socket outlet 3 pin 5 Amp" flush type controlled by one switch , complete all as specified and directed by Engineer-in- Charge.. |
| 151 | S&F Modular switch socket outlet 3 pin, 15Amp, flush type, complete all as specified and as directed by Engineer-in- Charge. |
| 152 | Ceiling rose, Pilot 3 Plate ceiling rose 6A ,complete all as specified and as directed by Engineer-in- Charge. |
| 153 | S&F Madular Fan step regulator, 120W complete all as specified and as directed by Engineer-in- Charge. |
| 154 | S&F MCB DB epoxy powder coated , SPN 4 way, 240 V, with 200 amps ratedbus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door as in replacment ,complete all as specified and directed by Engineer-in- Charge. |
| 155 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) all as specified and directed. (Note : Old ceiling Fan to be deposited in MES store yard for repair) |
| 156 | Supply and fixing in repair LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to light fittings complete all as specified and directed |
| 157 | Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed |
| 158 | Supply, laying in repair incluiding taking out& connecting PVC insulated, armoured, heavy duty electric cable with aluminium conductor 1100 volts of size 35 Sqmm 3.5 core with stranded aluminium conductor complete all as specified and directed by Engr-in-charge of followingsizes. (Note :- Excavation & earth work will be measured and paid separately under respective item). |
| 159 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in soft/loose soil. |
| 160 | Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point as directed. |
| 161 | Returning, filling in, including spreading, levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-charge. |
| 162 | Supply and spread fine dry sand locally available for cable cushioning complete all as specified and directed by Engr-in-charge. |
| 163 | M&L for laying sub class "B" brick in trenches as cable protection covers across the length of the cable complete all as specified and directed by Engr-in-charge. |
| 164 | Supply & fix in repair MCCB 100 Amp, 4 Pole, 415 V with breaking capacity 16 KA |
| 165 | M& L for Sub main wiring (concealed type )with two single core 4 Sqmm FRLS PVC insulated and unsheathed 1100 volts grade cables with stranded copper conductor cable drawn through in and including 25 mm dia rigid non metallic PVC conduit and conduit accessories including one single core 2.5 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dully complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface in and including taking down old unservicable sub main wiring , complete all as specified anddirected by Engineer-in-Charge. Note : (i) 2 run of 4 Sqmm ,1 run of PVC conduit & 1 run of 2.5 Sqmm cable will be measured as single run. (ii) Extra length of cables/wire required for connection to MCBs shall not be measured and paid separetly the rate quoted by contractor per unit shall be deemedto be included in the quoted rate of this item. |
| 166 | S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified |
| 167 | Supply and fix exhaust fan in repair made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed |
| 168 | Supply, laying in repair incluiding taking out& connecting PVC insulated, armoured, heavy duty electric cable with aluminium conductor 1100 volts of size 25 Sqmm 3.5 core with stranded aluminium conductor complete all as specified and directed by Engr-in-charge of followingsizes. (Note :- Excavation & earth work will be measured and paid separately under respective item). |
| 169 | Supplying and laying un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm complete. |
| 170 | S&F distribution box epoxy powder coated, SPN 8 way, 240 V, with 200 amps ratedbus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal single door as in replacment ,complete all as specified and directed by Engineer-in- Charge. |
| 171 | Supply & fixMCB SPN capacity 32 amp, "C" series , complete all as specified and directed by Engineer-in- Charge. |
| 172 | MCB SP 6 to 32 Amps, 240 Voltsof "B" series to be housed in DBsand suitable size cable lugs to be fixed with MCBs as in replacment, complete all as specified and directed by Engineer-in- Charge. |
| 173 | Supply and fix exhaust fan in repair made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed |
| 174 | NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
