Military Engineer Services-MES has published Tender For Repairs To Rolling Shutters, Hanger Doors, Gates, False Ceiling And Bird Proofing Net, Camouflage And External Painting To Bldg In Zone B In Tech Area At Af Stn Jaisalmer. Submission Date for this Tender is 03-06-2024. False Celing Tenders in jaisalmer Rajasthan. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 11f579e8-9c51-4923-b309-5c792116b06f.html | Tender Notice | 0 KB |
| 8229TENDERDOCUMENTS.pdf | Tender Document | 0 KB |
| BOQ_731161.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking downrolling shutter push pull or manual type and re-fixing the same in position after necessary repairs such as cleaning , oiling, greasing,replacement of rusted nuts and bolts with required / welding grinding for smooth functioning of shutter and making good any damage to the existing shutters to the following opening:- (a)Area of Shutters exceeding 5 Sqm but not exceeding 10 Sqm each. |
| 2 | Taking down rolling shutter gear operated type with bevel gear box and crank handle and re-fixing the same in position after necessary repairs such as cleaning , oiling, greasing, replacement of rusted nuts and bolts with required / welding grinding for smooth functioning of shutter and making good any damage to the existing shutters to the following opening:- (a) Area of Shutters not exceeding 10 Sqm each. |
| 3 | (b) Area of Shutters exceeding 10 Sqm but not exceeding 20 Sqm eachcomplete all as specified and as directed. |
| 4 | (c) Area of Shutters exceeding 20 Sqm but not exceeding 30 Sqmcomplete all as specified and as directed. |
| 5 | (d)Area of Shutters exceeding30 Sqmcomplete all as specified and as directed. |
| 6 | Dismantling mild steel work of any description and size as in purlins, stanchions, plate etcnot otherwise providedcomplete all as specified and as directed. |
| 7 | S&F Steel work in tubular pipes stanchions, purlinsincluding special shaped , including special shaped washer etc. complete usingor including butt welded tuber cum forming to I.S. 1161-1979 grade st - 240complete all as specified and as directed. |
| 8 | M&L Repair to existing hanger sliding door shutter, each exceeding 5.0 m but not exceeding 10 M height straightening of worn-out top & bottom rails, replacing of unserviceable rollers,including oiling, greasing & cleaning of rails,tightening/replacing the loose nut and bolts, necessary /required welding, replacement of broken locking arrangement etc and positioning of door shutter in same opening for smooth functioning of hanger door shutter complete all as specified and as directed. |
| 9 | M&L Repair to existing hanger sliding door shutter, each exceeding 2.00 m but not exceeding 5.00 M height straightening of worn-out top & bottom rails, replacing of unserviceable rollers,including oiling, greasing & cleaning of rails, tightening/replacing the loose nut and bolts, necessary /required welding, replacement of broken locking arrangement etc and positioning of door shutter in same opening for smooth functioning of hanger door shutter complete all as specified and as directed. |
| 10 | S&F in repairs MS chain of size 20mm x20mm and 1.50 to 2.00m long complete all as specified and directed. |
| 11 | S&F in repairs stainless steel ball bearings roller of existing size as per site requirement complete all as specified and directed. |
| 12 | S&F in repair MS Flat iron handle of 500mm long suitable for operating hangar door/steel doors complete all as specified and directed. |
| 13 | S&F in repairs 40 mm boreM SPipe “medium grade for rolling shutter for smooth functioning, of old rolling shutter all as directed. |
| 14 | S&F in repairs steel spring of suitable sizeforold rolling shutter and including smooth functioning andremoval of old steel spring from site all as directed. |
| 15 | S&F in repairs in rolling shutters top coverfabricated to required shape and size made out of 1.00 mm (20 gauge) thick M S sheet including necessary fixtures and fastening with one shop coat of redoxide primer of length upto 3.00 Mtr complete all as directed. |
| 16 | Ditto all as in Sl Item No 12 above but length exc 3.00 Mtrbut n" exc 5.00 Mtrscomplete all as specified and as directed. |
| 17 | S&F in repairs Gear box assembly for rolling shutter including rod, required nuts, bolts, cleats, crank handle etc. complete of standard make and fixed in position including one coat of primer including removal of old gear box assembly and other accessories all as specified and directed. |
| 18 | Taking down existing unserviceable rolling shutter complete of any size and any type andremoving from sitecomplete all as specified and as directed. |
| 19 | S&F rolling shutter with thickness of laths 1.25 mm including top cover, anchoring rod, hasp and staple and one coat of primer and erect with gear operated type with bevel gear box with rod and crank handle, with 1.25 mm thick laths complete all as specified and as directed. |
| 20 | Dismantling Plain / Galvalum sheet, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed. |
| 21 | S&F Pre-painted galvalume sheet as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed. |
| 22 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of ancolour having tensile strength of 550 Mpa as in nroof covering/cladding to wall, fixed with L-type or J-type screwscomplete all as specified and as directed. |
| 23 | M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthethic enamel paint in one or more tints as required in camouflage pattern etc complete all as specified and directed. |
| 24 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthethic enamel paint in one or more tints as required in camouflage pattern over a coat of red oxide primer etc complete all as specified and directed. |
| 25 | Demolition of Brick work of stone/boulder masonry, built in cement mortar excluding ashlars facing dressed stone work and pre-cast concrete etc complete all as specified. |
| 26 | M&L for square rubble walling Jodhpur type brought up to courses well bonded, bedded and solidly hearted in cement morgtar 1:6 etc complete all as specified. |
| 27 | Labour only for hammer dressing to face stones with maximum depressions on face from a stright edge not exc. 20 mm and dressing face beds and joints as specified to SR walling Jodhpur typebrought upto courses complete all as specified and as directed. |
| 28 | M&L for rendering 15 mm thick in cment mortor 1:6 on fair faces of stone masonary or concrete surfaces is to be finished even and smooth w/o using extra cement complete all as specified and as directed. |
| 29 | Dismantling wall and ceiling boards any thickness, including cover fillets complete all as specified and as directed. |
| 30 | S&F 12 mm thick Perforated particle board/tiles for insulation and acoustic purposes, 60x60 cm in size, fixed with screws to ceiling timber frame work or with staples on snap grid complete all as specified and as directed. |
| 31 | S&F anodised aluminium snap grid (size 605 x 605 mm) frame work for false ceiling complete all as specified and as directed. |
| 32 | M&L for preparation of old treated/decorated external wall surfaces of any storeys / heightand applying one coat of cement based paint in different tints in sigma/camouflage pattern as approved complete all as specified and directed. |
| 33 | M&L preparation of old painted steel surfaces over 10 cm in width or girth as in steel gate, fencing post, gates hangars, steel door etc and applying one coat of synthetic enamel paint with appropriated arrangements of shuttering to reach any height of bldgs complete all as specified and directed. |
| 34 | M&L for preparation of old treated/ decorated external wall/roof surfaces of any storeys / heightof any description and applying one coat of exterior emulsion paint (weather coat) 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified & as directed. |
| 35 | M&L for preparation of old decorated surfaces of walls of any description and applying one coat of white wash etc. complete all as specified and directed by Engineer-in-Charge. |
| 36 | M&L for preparation of old decorated surfaces of ceilings of any description and applying one coat of white wash etc with appropriated arrangements of shuttering/ladder. complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for preparation of old decorated wall surfaces of any description and applying one coat of oil emulsion distemper of different tints in sigma/camouflage pattern as approved complete all as specified and directed. |
| 38 | M&L for preparation of old decorated ceiling surfaces of any description and applying one coat of oil emulsion distemper of any tint etc complete complete all as specified and directed by Engr-in-charge. |
| 39 | M&L for preparation of old painted wooden surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint of any tint etc complete all as specified and directed by Engr-in-charge. |
| 40 | Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. |
| 41 | M&L for 15mm thick external rendering in CM 1:4 on stone masonry or other than fair faces ofconcrete / brickis to be finished even and smooth (without using extra lime or cement) complete all as specified. |
| 42 | M&L for internal rendering 10mm thick on concrete surfaces of any description in cement mortar (1:6) is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 43 | M&L 5mm thick rendering on concrete surfaces of ceiling,soffits of chajjas/drop & roof projection facia etc.in CM 1:3 finiched even and smooth with out using extra cement complete all as specified. |
| 44 | M&L for applying 3mm thick wall care putty on wall surface complete all as specified |
| 45 | M&L for applying 3mm thick wall care putty on ceiling surface complete all as specified |
| 46 | M&L for preparation of newly plastered of wall surfaces and applying two coats of cement based paint over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified. |
| 47 | M&L for preparation of new treated/ decorated external wall/roof surfaces of any storeys / height upto 10m of any description and applying two coat of exterior emulsion paint (weather coat) over one coat primer 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified & as directed. |
| 48 | M&L for prepration of new surface plastered or unplastered applying three coats of White washing on ceiling,soffits of chajjas/drop & roof projection facia etccomplete as specified. |
| 49 | M&L for preparation of newly plastered of wall surfaces and applying two coat of oil emulsion distemper over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified. |
| 50 | M&L writing letters or figures(Block,roman,Italic or Indian letter n.exc 30cm high) complete as directed by Engineer-in-charge |
| 51 | M&L preparation of old painted concretesurfaces over 10 cm in width or girth as in kerb stone,concrete floor etc and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 52 | M&L for rendering 10mm thickon concrete surfaces as kerb stone etc of any description in cement mortar (1:4) is to be finished even and smooth (without using extra lime or cement) incl grooving complete all as specified and directed. |
| 53 | M&L preparation of new plastered concretesurfaces over 10 cm in width or girth as in kerb stone,concrete floor etc and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
