Military Engineer Services-MES has published Tender For Welcome Maint Services And Connecting Br Works For Offrs Md Accn In Chetak Complex Under Ge Af Adm Area At Af Stn Gwalior. Submission Date for this Tender is 31-05-2024. Building Work Tenders in gwalior Madhya Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 141edb8c-9b6b-4ade-9025-36de2ada3fdb.html | Tender Notice | 0 KB |
| BOQ_731262.xls | Tender Document | 0 KB |
| TENDER8408.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | M&L for complete removal of existingtreatment from old surfaces of walls including cornices and applying 1mm thick wall care putty including one coat of primer to obtain the desired/ true surface of wall complete all as specified and directed by Engineer- in-charge. |
| 2 | M&L for applying two coat of oil emulsion distemperon putty prepared surface of walls complete all as specified and directed. Note:- Distemper shall be applied by using hand roller. |
| 3 | M&L for Preparation of olddecorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material including screws, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying one coat of oil emulsion distemper on old decoratedsurface of wall etc complete all as specified and directed. Note:- Paints/Primer shall be applied using hand roller only. |
| 4 | M&L for Preparation of olddecorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material including screws, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying two coat of oil emulsion distemper on old decoratedsurface of wall etc complete all as specified and directed. Note:- Paints/Primer shall be applied using hand roller only. |
| 5 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white washcompleteall as specified & as directed. |
| 6 | M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceilingcompleteall as specified &directed. |
| 7 | M&L for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works complete all as specified and directed. |
| 8 | M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) with and including two coats of oil paint over a coat white basesynthetic enamel paint complete all as specified and directed. |
| 9 | M&L forpreparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying two coat of synthetic enamel paint,complete all as specified and as directed. |
| 10 | M&L forpreparation of new painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over coat of pink primer,complete all as specified and as directed. |
| 11 | M&L forpreparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint, complete, all as specified and as directed |
| 12 | Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified anddirected. |
| 13 | M&L for non skid ceramictiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed. |
| 14 | M&L for non skid ceramictiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed. |
| 15 | All as per above item No 14.00 buton vertical surfaces including 10mm thick rendering in CM 1:4 |
| 16 | M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc,set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles overrendering 10 mm thick in CM 1:3 on wall complete all as specified and directed. |
| 17 | M&L for vitrified ceramic coloured tiles 10 mm thick, area of each tiles n. exc 0.36 sqm in floors, set and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 18 | M&L,forvitrified ceramic coloued tiles 10 mm thick, area of each tiles n. exc 0.36 sqm in floors, set and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over but, on vertical surfaces over and incld 10 mm thick rendering in CM 1:4complete all as specified and directed |
| 19 | Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, sccrubbing down with water etc complete all as specified and directed. |
| 20 | M & L for rendering 10 mm thick on fair faces of brick wall finished even & smooth without using extra cement in CM 1:6 complete all as specified and directed. |
| 21 | M &L for 5 mm thick rendering in cement mortar1:3 to the surfaces of ceiling/fascia/roof projection and finishing even and smooth without using extra cement complete all as specified. |
| 22 | M & L for rendering 15 mm thick on other than fair faces of brick wall finished even & smooth without using extra cement in CM 1:4 complete all as specified. |
| 23 | M & Lpreparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 24 | M & L for preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of primer complete all as directed. Note:- Paints shall be applied by using hand roller. |
| 25 | M & Lpreparation of newly plastered surfaces of wallsincluding one coat of primer and providing1 mm thick putty on wall surface and twocoats of oil bound distemper complete all as specified and directed. Note:- Distemper shall be applied by using hand roller. |
| 26 | M & L for providing drip moulding or small weather groove n exc exc 15 cm width or girth including cutting to edges all mitres and stopped endscomplete all as specified and direcetd. |
| 27 | Demolition of Stone slabs of any description or thickness in floors / kitchen/roof platforms etc., complete all as specified and as directed. |
| 28 | M&L Granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm screed bed in CM 1:4 all as specified and directed. |
| 29 | Taking down shuttersexe 1.0 Sqm but not exc 2.0 Sqm each complete all as specified and directed. |
| 30 | S & F factory made 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed |
| 31 | S & F factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter ,divided into squares with plain chamfered rounded, mitered and rebated sash bars as specifed in SSR Part-I section 8, clause 8.24 (a) complete all as specified and directed. |
| 32 | S&F for Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sidesand includingDecorative laminate type 1 of surface finish, colour and pattern 0.9 mm thick both sides as approved, fixed with approved adhesive as per manufacturer"s instructions completeas spd and directed. |
| 33 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. but partially gauzed i.e upper panel will be wire guage and lower panel will be prelam pvc sheet. M.S frame shall be covered with both side prelaminated printed PVC sheet used instead of plain colour PVCSheet5mm thick x 15 mm wide PVC sheet beading used inside stiles and rails and decotative PVC beading of 10mm x 10mm (90 )used instead of exposed portion of PVC sheet beading width stuck inside with solvent cement for stiles and prelaminated printedPVCsheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing complete all as specified. |
| 34 | S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC PrelamSheet on the front face & 2mm Prelam colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 35 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 36 | S&F 110mm bore PVC (SWR) pipessingle socketed in any length with rubber ring joints fixed to wall/floor including PVC holding clamps includingtaking down rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store complete all as directed. |
| 37 | S&F 110mm bore PVC (SWR) bend, any radius complete all as specified and directed. |
| 38 | S&F GI tubing 15mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling including taking down old 15 mm bore steel tubingetc complete all as specified andasdirected. |
| 39 | S&F GI tubing 20mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling including taking down old 20 mm bore steel tubing etc complete all as specified andasdirected. |
| 40 | Disconnecting existing tanks, setting aside (or lowering if required) for Cleaning and removing all Scales and dirts from the Tank and mouths of Circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 LITRE but not exc. 500 LITRE, cleaning the Tank by scrubbing the deposits with Wire Brush, writing Letters "CLEANED ON DD.MM.YYYY" (i.e. date of Cleaning of Tank) not exc. 50mm in height afterand hoisting if required reconnecting and re-fixing in position. inposition complete all as specified and as directed. |
| 41 | Disconnecting existing tanks, setting aside (or lowering if required) for Cleaning and removing all Scales and dirts from the Tank and mouths of Circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 500 LITRE but not exc. 1000 LITRE, cleaning the Tank by scrubbing the deposits with Wire Brush, writing Letters "CLEANED ON DD.MM.YYYY" (i.e. date of Cleaning of Tank) not exc. 50mm in height afterand hoisting if required reconnecting and re-fixing in position. inposition complete all as specified and as directed. |
| 42 | S&Frotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top),triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknutsetc. of 20 mm dia including dismantling of old PVCtank(Capacity 250- 500 Litres) & removing to where directed complete all as specified and as directed. |
| 43 | S&Frotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknutsetc. of 20 mm dia including dismantling of old PVCtank(Capacity 500- 1000 Litres) & removing to where directed complete all as specified and as directed. |
| 44 | S&Fball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore pipe minimum weight 210 gms complete all as specified. |
| 45 | S&F in repairball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified. |
| 46 | S&F in repair CP health faucet with 1.00 Mtr long flexible tube including wall hook complete all as specified and directed. Make Jaquar,Plumber or equivalent as approved by GE. |
| 47 | S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottmom & cover and aluminum anodised hinging device all as specifed and as approved. |
| 48 | S&F in repair vitreous china wash down water closet pan pedestal pattern white (excluding fixing bolts, flushing cistern) including flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern etc all as specified and directed. |
| 49 | S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, "P" or "S" trap, including connection to trap and flushing pipe, antisyphonage pipe including PCC 1:5:10 type E2 in filling making good to floor etc all as specified. |
| 50 | S&F in repair of internal fittings Kit/wall mounted concealedfor vitreous chinaflush cistern with twin flush complete all as specified and directed |
| 51 | S&F in repair PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including32 mm dia PVC flush pipeconnected to water closet with inlet, ball valve, float and handle complete all as specified. |
| 52 | S&F in repairCP Showerrosewith arms\125mm dia size for 15mm bore pipecomplete all as specified and as directed. |
| 53 | S&F in repairs two way bib cock, brass CP mixture for mixing hot & cold water Quarter turn with water saving nozzle complete all as specified and as directed by Engineer-in-Charge. |
| 54 | S&F in repairs PTMT waste pipe 32 mm bore of length up to 80 cm for WHB / sink/unrinal pots, complete all as specified and directed. |
| 55 | Supply & fixin repairsheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. |
| 56 | S&F in repair glass corner self assembly, fancy type,made of 7-8mm thick sheet toughened glass of size 300*150mm,fixed with CP brackets,complete,all as specified and directed. |
| 57 | S&F in repair fancy type brass chromium plated wall mixer with and including Telephonic shower arrangements & with pipe bend 3-in-1 screwed down with connection to overhead and hand shower suitable for 15 mm bore GI pipeQuarter turn with water saving nozzle complete all as specified and directed. |
| 58 | S&F in repair fancy type brass chromium plated wall mixer 2-in-1 with wall flanges Connecting legs and bend screwed down suitable for 15 mm bore GI pipeQuarter turn with water saving nozzle complete all as specified and directed. |
| 59 | S&F in repairs fancy typesink mixer brass chromium plated screwed down 15mm bore Quarter turn with water saving nozzle complete all as specified and directed. |
| 60 | S&F in repairs fancy typeCentre hole basin mixer brass chromium plated screwed down 15mm bore Quarter turn with water saving nozzle complete all as specified and as directed. |
| 61 | S & F in repair fancy type angle/stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed,complete all as specified and as directed. |
| 62 | S & F in repair Bib cock long body with flange, 15 mm dia, cast copper alloy, fancy type ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, Quarter turn with water saving nozzle complete all as specified and as directed. |
| 63 | S&F in repairs PVC connections 15mm size of PTMT of 600mm long. complete all as specified and directed. |
| 64 | Repair to leakage of 15 mm bore CP Wall Mixer/WHB Mixer/Sink Mixer by replacing of necessary brass spindles as required complete all as specified and directed. |
| 65 | S & F in repair Gun-metal, globe or gate valve, 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 66 | S&F in repairstank covers(with locking arrangements as per existing one) of water storage tank for capacity 500 ltrs to 1000 ltrs complete all as specified & directed. |
| 67 | S&F in repair 1.00 mm thick stainless steel plate rack ofover all size 600x900x100 mm of standard pattern complete all as specified and directed. Make : Nirali |
| 68 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe( overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm), complete all as specified and directed. |
| 69 | S&F in repairhigh quality plastic bathroom cabinet of size 550 x 342 x 125mmconsisting front looking mirror and four to five inner compartments fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed |
| 70 | S&F in repairs 600 x 450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with C.Pbrass screws and cup washers complete all as specified and directed. |
| 71 | S&F in repair chromium plated hand shower with flexible pipe not less than 1 Meter suitable for 15 mm bore fittings complete all as specified and directed. |
| 72 | S&F in repair 125mm chromium plated central hole grating dome with waste hole complete all as specified and directed. |
| 73 | S&F in repair CP soap dish with glass Finish (Glossy) complete all as specified and directed. |
| 74 | S&F in repair brass chromium plated paper holder complete as specified and directed |
| 75 | S&Fixed in repair ofSS powder coated peg sets of 6 Nos peg set of good quality, complete all as specified and directed. |
| 76 | Dismantling boarding any description, fixed in any position with nails etc all as specified and directed. |
| 77 | S&F in repair 18mm thick solid PVC ply of 1st quality, one side prelaminated of approved colour and other side white colour fixed with screwes, solvent cement/ adhesive to make kitchen cabinate and cup board shutters complete all as specified and directed. |
| 78 | S & F in repair 12mm thickPVC boardof grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawer any type or specification complete all as specified and directed. |
| 79 | S&F including fabricating of aluminium powder coated having minimum thickness of powder coating 50 micron for door / window / ventilator frame, shutters and partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc. aluminium sections as approved by GE complete all as specified and directed. |
| 80 | S&F aluminium grills of size exc 5mm x 7.5mm and aperture n. exc 80 mm incl fixing with aluminium channel 1mm thick with steel screw and tint match with existing complete all as specified and as directed |
| 81 | S&F mild steel work as in small ariticles as bend, strap, hold fast,jiost,angles and smiliar articles Fe-410W Gde Ecomplete all as speciifed and directed. |
| 82 | Refixing of shutters including taking down of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s)after resecuring or easing & adjusting, complete all as specified and directed. |
| 83 | Taking down and re-fixing of old aluminum door shutters/window in same opening after necessary required repairs and fittings including replacement of damaged, glass rubber beading and glazing clips (Glass pan and wire gauge will be measured and paid separately area n.exc 2.00 sqm each completion all as specified and directed. |
| 84 | S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staplescompleted all as specified and directed. |
| 85 | S & F in repair 140mm door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed complete all as specified and directed. |
| 86 | Supply and fixing of steel door spring of size 300mm in wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed. |
| 87 | S&F 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane with wooden beads/putty including hacking out old glass from frames glazed with p[utty or fixed with beads complete all as spd and directed |
| 88 | S & Fstainless steel butt hinges of 125mm size complete all as specified and directed. |
| 89 | S&F 150mm long aluminum anodized barrel tower bolts of extruded section & fixed complete all as specified and directed. |
| 90 | S&F aluminum handles anodized 150 mm size complete all as specifed and directed |
| 91 | S&F stainless steelanodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed. |
| 92 | S&F in repair fancy type decorated anodised aluminium curtain hanging rods 25 mm dia heavy duty (304 grade)including brackets, including fixing arrangement,heads at both ends and making up repair work and all fitting complete all as specified and directed. |
| 93 | S & F continuous (Piano) hinges ,stainless steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed. |
| 94 | S&F soft closing hinges O "Dgree" heavy duty 304 Grade high grade mild steel, bright finish or electrogalvanised as per approvedsample for kitchen cupboard shutters complete all as specified and directed. |
| 95 | S&F in repairs Magnet catchfor kitchen cabinet shutters as per approvedsample complete all as specified and directed. |
| 96 | Supply and fixing of door beading 40mm strip in bottom of door complete all as specified and directed. |
| 97 | S&F 100mm long fancy SS handle for cupboard & wardrobe shutter complete all as specified and as directed by Engr-in-charge |
| 98 | Supplyandfixing in repairStainless Steel (SS-204)Basket for plate/cutlery/Large utensil/Cup&saucer/Tali of size as per site requirement of approved sample complete all as spd and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
