Military Engineer Services-MES has published Tender For Construction Of Room For Installation Of Ar/ Vr Based Fire Fighting Tool And Store Room Alongwith Connected Services At Afs Under Ge (Af) Tezpur. Submission Date for this Tender is 25-05-2024. Building Work Tenders in tezpur Assam. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| e4d5d82b-68fa-4a1e-890d-09e3aaa250ff.html | Tender Notice | 0 KB |
| 8009tender.pdf | Tender Document | 0 KB |
| BOQ_731185.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out, complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed. |
| 3 | Returning filling in soft/ loose soil, including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed. |
| 4 | Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed. |
| 5 | Material and labour for, moorum/red bajri filling in floors or pavings, laid in layers not exc.15cm thick, spread, levelled and rammed including watering, complete all as specified and directed. |
| 6 | Material and labour for, broken stone or boulders hardcore of gauge not exc.63 mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 7 | Material and labour for, broken stone or boulders hardcore of gauge exc.63mm but not exc.100 mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 8 | Materials and labour for, plain cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed. |
| 9 | Material and labour for, RCC M25 (Design Mix) (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 10 | Material and labour for, RCC M25 (Design Mix) (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 11 | Material and labour for, RCC M25 (Design Mix) (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m, complete all as specified and directed. |
| 12 | Material and labour for, RCC M25 (Design Mix) (using 20mm graded crushed stone aggregate) as in chajjas, complete all as specified and directed. |
| 13 | Materials and labour for, plain cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in damp proof course to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed. |
| 14 | Materials and labour for, plain cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed. |
| 15 | Materials and labour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 16 | Materials and labour for brickwork with sub class ‘B’ bricks, old size, straight or curved on plan to any radius inhalf brick thick walls built in cement mortar (1:4), complete all as specified and directed. |
| 17 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc. for rough finished surface, complete all as specified and directed. |
| 18 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface, complete all as specified and directed. |
| 19 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and directed. |
| 20 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizon tal or sloping and similar work exc.10cm but not exc 20cm for fair finished, complete all as specified and directed. |
| 21 | Supply and fix for, 20mm thick, 2nd class hard wood boarding, clean sawn with butt joints, fixed with nails in any situation (except flooring and skirting), complete all as specified and directed. |
| 22 | Supply and fix for, 20mm thick, 2nd class hard wood boarding, plane both sides and edges, tongue and groove or rebated, complete all as specified and directed. |
| 23 | Material and labour for 35mm thick 2nd class hard wood, factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 24 | Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed. |
| 25 | Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed. |
| 26 | Supply and fix for, medium weight, cold rolled mild steel butt hinges,100 mm size, complete all as specified and directed. |
| 27 | Supply and fix for 100mm size, butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed. |
| 28 | Supply and fix for, aluminium anodized barrel tower bolts of extruded section, 150mm long complete all as specified and directed. |
| 29 | Supply and fix for, aluminium handles, cast type, anodised 150 mm size, complete all as specified and directed. |
| 30 | Supply and fix for, aluminium alloy, anodised, sliding door bolt, length of bolt 300 mm,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 31 | Supply and fix for, aluminium anodised curtain rod 20mm dia with bracket, stops, rollers etc., complete all as specified and directed. |
| 32 | Supply and fix for, door closer (extruded section) hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 33 | Supply and fix for, rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290, Grade E-165 complete all as specified and directed. |
| 34 | Supply and fix for, rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and directed. |
| 35 | Material and labour for, rolled mild steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290, Grade E-165 complete all as specified and directed. |
| 36 | Supply and fix for, mild steel TMT bars 10mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips, complete all as specified and directed. |
| 37 | Supply and fix for, mild steel TMT bars 5mm dia. and over upto including 10mm dia as in stirrups, spacers and binder, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed |
| 38 | Supply and fix for, factory made pressed steel frames of size 125 mm x 60 mm pressed out of cold rolled mild steel sheets of 1.25 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed. |
| 39 | Supply and fix for, anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement as specified and directed. |
| 40 | Supply and fix for, aluminium with powder coating (minimum thickness of powder coating 50 micron) frame, 92 mm x 29.5 mm for three track sliding windows with one or more rebates including joining cleat for fixing etc., with sliding type shutters,without sash bars, aluminium sections with powder coated (minimum thickness of powder coating 50 micron) 39 mm x 20 mm including necessary joining cleats,glazing clips,rubber packing,anodised aluminium with powder coated (minimum thickness of powder coating 50 micron) snap beading,screws etc.(Thickness of aluminium sections not less than 1.5 mm),with suitable sliding & locking arrangement,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and 4.8 mm thick sheet glass tinted,complete all as specified and directed. Notes:-(i)Refer list of Drawings.(ii) Overall size of opening will be measured. |
| 41 | Supply and fix for, powder coated aluminium door frame with anodised aluminium shutters, side hung type, without sash bars, with top rail, styles, lock rail and bottom rail including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable barrel tower bolts of extruded section (02 Nos), suitable handle (02 Nos), lock (01No.), screws etc. with and including 5.5mm thick sheet glass, tinted, complete all as specified and directed. Notes: (i) Refer list of drawings (ii) Overall size of opening will be measure. |
| 42 | Supply and Fix, aluminium with powder coating (minimum thickness of powder coating 50 micron) ventilator section 63.5 mm x 38.10 mm x 2.5 mmthick, half portion louvered and half portion fixed type without sash bar, with half portion provided with 100 mm wide louver blades made out of 4 mm thick figured glass, pin head type aluminium actuator bar and lever handle with and including stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm for insect proofing and rest half portion provided with aluminium with 4mm thick figured glass, pin head type and including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and directed. Notes:-(i)Refer list of Drawings.(ii) Overall size of opening will be measured. |
| 43 | Material and labour for, pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 44 | Material and labour for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete, all as specified and directed. |
| 45 | Materials and labour for, anodised aluminium snap grid frame work for false ceiling, size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6mm thick, designer(primered) high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screws, complete all as specified and directed. |
| 46 | Material and labour for 100mm thick plain cement concrete (1:2:4) type B2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 47 | Materials and labour for, non - skid ceramic tiles, coloured,7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, conforming to IS 15622, Grade B IIa,in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6), complete all as specified and directed. |
| 48 | Materials and labour for, glazed ceramic coloured tiles, 450 X 300 X 7mm thick, conforming toIS 15622,Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and directed. |
| 49 | Materials and labour for, light shade, vitrified ceramic tiles 10mm thick (square/ rectangular), polished area of each tile not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6), complete all as specified and directed. |
| 50 | Materials and labour for, vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sqm, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and directed. |
| 51 | Material and labour for 75mm thick plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, finshed the surface even and smooth without using extra cement, complete all as specified and directed. |
| 52 | Material and labour for 75mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 53 | Material and labour for providing, dry river sand as in sand cushioning of paver blocks including consolidation and punning down sandin layer, complete all as specified and directed. |
| 54 | Material and labour for bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight, 8cm wide and 8cm depth as in joint filling in plinth protection, complete all as specified and directed. |
| 55 | Materials and labour for, machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed or bedding layer of CM (1:6),complete all as specified and directed. |
| 56 | Materials and labour for, machine cut kota stone slab 20-25 mm in raisers of steps, skirting, dado and pillar, laid over and including 10 mm thick rendering in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 57 | Supply and laying for, machine pressed precast concrete interlocking paver block,with grey cement and pigment,any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade,complete all as specified and directed. |
| 58 | Material and labour for, chequered cement concrete tiles with grey cement and pigment, 20cm X 20cm X 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors and cut and polished over and including 20mm thick screed bed or bedding layer in CM (1:6), complete all as specified and as directed. |
| 59 | Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork or concrete surface in wall, complete all as specified and directed. |
| 60 | Materials and labour for, rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, finished even and smooth without using extra cement, complete all as specified and directed. Note: WPC will be measured and paid separately under relevant item. |
| 61 | Material and labour for, applying 1mm thick wall care putty over plastered surface to prepare the surface even and smooth, complete all as specified and directed. |
| 62 | Material and labour for, preparation ofnew plastered or unplastered surfaces and applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and directed. |
| 63 | Material and labour for preparation ofnew plastered or unplastered surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed. |
| 64 | Material and labour for, preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 65 | Material and labour for preparation of new steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 66 | Materials and labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed. |
| 67 | Materials and labour for galvanized steel tubing, medium grade, 20mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed. |
| 68 | Supply and fix for, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 20mm bore, complete all as specified and directed |
| 69 | Material and labour for, 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I , including ball valves high pressure of PTMT (Minimum weight210gms) with epoxy coated Aauminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed and including dismantling existing water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and removing to store, complete all as specified and directed. |
| 70 | Supply and fix for, vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 71 | Supply and fix for, vitreous china urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed. |
| 72 | Supply and fix for, PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 litres, including brackets, PVC flush pipe, complete all as specified and directed. |
| 73 | Supply and fix for, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect andspecified. |
| 74 | Supply and fix for, toilet paper holder with flat recessed type of brass, chromium plated or stainless steel fixed to wall, complete all as specified and directed. |
| 75 | Supply and fix for, 15mm bore, angle stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 76 | Supply and fix for, bib tap, fancy type, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed. |
| 77 | Supply and fix for, pillar taps, cast copper alloy, with capstan heads, fency type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore, complete all as specified and directed. |
| 78 | Supply and fix for, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed. |
| 79 | Supply and fix for, vitreous china wash basin, white, flat back, size 550mm X 400mm excluding taps, waste chain and porcelain stopper, but including brackets, cutting for and pinning in ends of brackets or erecting stand, 32mm dia brass waste coupling and 32mm dia PVC waste pipe, complete all as specified and directed. |
| 80 | Supply and fix for, 600 mm X 450 mm bevelled edge mirror of selected quality glass 5mm thick mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 81 | Supply and fix for, brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 82 | Supply and fix for, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 83 | Supply and fix for, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 84 | Supply and fix for, 75 mm bore PVC (SWR) bends any radius,complete all as specified and directed. |
| 85 | Supply and fix for, 110 mm bore PVC (SWR) bends any radius,complete all as specified and directed. |
| 86 | Supply and fix for, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 87 | Supply and fix for, 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 88 | Supply and fix for, PVC (SWR) floor trap, plain with grating,with diameter of outlet 75 mm, including jointing with solvent cement, complete all as specified and directed. |
| 89 | Supply and fix for, 110mm bore, PVC (SWR) vent cowl, complete all as specified and directed. |
| 90 | Material and labour for, reinforced concrete pipes, class NP2, laid and jointed complete with collars, 150mm bore, complete all as specified and directed. |
| 91 | Material and labour for, PCC (1:3:6) typeC2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes of 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed. |
| 92 | Material and labour for point wiring with 1.50Sqmm (nominal area) FRLSH PVC insulated and unsheathed, multistranded copper conductor cable 1100 volts grade, single core, laid in and including not less than 20mm size PVC concealed conduit (medium grade) complete with all fittings and accessories suitable for one light/ fan point controlled by one switch including unsheathed single core stranded copper cable of size 1.50Sqmm as earth continuity conductor connected to common earth dollyto be terminated to sunken/ pressed steel flush box covered with outer/ inner plates etc. as per site requirement for mounting switches, socket, fan regulator etc. including testing on completion, complete all as specified and directed. (Notes: Metal flush box and cover plate shall be inclusive in the quoted rate) |
| 93 | All as per serial item No.92 here-in-before but for one 3 pin 5Amps switch socket outlet on independent board. |
| 94 | All as per serial item No.92 here-in-before but wiring with 2.5 Sqmm including 2.5 Sqmm PVC insulated unsheathed multistranded FRLSH copper conductor cable 1100 volts grade, single core earth continuity conductor connected to common earth dolly for one 3/5 pin 15 Ampsswitch socket outlet on independent board. |
| 95 | Supply and fix for, switch piano, flush type single pole, one way 5 Amp, complete all as specified and directed. |
| 96 | Supply and fix for, ceiling rose, surface bakelite, 65mm x 50mm three terminals, complete all as specified and directed. |
| 97 | Supply and fix for, switch socket combination 2 in 1, 3 pin 5 Amps flush type universal, complete all as specified and directed. |
| 98 | Supply and fix for, switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal, complete all as specified and directed. |
| 99 | Supply and fix for, fan regulator electronic type rotary step, 120 volts, complete all as specified and directed. |
| 100 | Material and labour for, sub main/ circuit wiring with two single core FRLSH PVC insulated unsheathed cable 6.00 Sqmm (nominal area) with multistranded copper conductor cable, 1100 Volts grade, drawn through existing PVC concealed conduit includingearth continuity conductor of single core FRLSH PVC insulated, unsheathed multistranded copper cable 6.00 Sqmm (nominal area), 1100 volts grade, complete all as specified and directed. (Note: Two run of wiring cable, one run of earth wire and PVC conduit will be measured as one unit). |
| 101 | Supply and fix for, LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light all as per Cat No.CCS-102-20-65-SL-DP-NWH of make Crompton or equivalent model of make Bajaj/ Philips/ Wipro, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 102 | Supply and fix for, LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp all as per Cat No.CCS-102-10-65-SL-DP-NWH of make Crompton or equivalent model of make Bajaj/ Philips/ Wipro, including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 103 | Supply and fix for, LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp all as per Cat No.TCR-145-36-65-SL-NWH of make Crompton or equivalent model of make Bajaj/ Philips/ Wipro, suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. |
| 104 | Supply and fixing LED street light fitting 35/ 36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant all as per Cat No.LSTS-36-CDL-M of make Crompton or equivalent model of make Bajaj/ Philips/ Wipro, including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed. |
| 105 | Supply and fix for, sheet metal enclosurs for MCB DB 4 way TPN, vertical type, double door, IP54 protection with 200 Amps rated bus bar including earth and neutral link with all accessories, complete all as specified and directed. |
| 106 | Supply and fix for, sheet metal enclosurs for MCB DB 4 way SPN, vertical type, double door, IP54 protection with 200 Amps rated bus bar including earth and neutral link with all accessories, complete all as specified and directed. |
| 107 | Supply and fix for, MCB, SP, 240 volts, 10KA, "C" curve, 6 to 32 Amps, complete all as specified and directed. |
| 108 | Supply and fix for, MCB, SPN, 240 volts, 10KA, "C" curve, 6 to 32 Amps, complete all as specified and directed. |
| 109 | Supply and fix for, MCB, TPN, 415 volts, 10KA, "C" curve, 63 Amps, complete all as specified and directed. |
| 110 | Supply and fix for, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts, complete all as specified and directed. |
| 111 | Supply and fix for, ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC), complete all as specified and directed. |
| 112 | Supply and fix for, exhaust fan, steel body AC single Phase 230 volts of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed. |
| 113 | Material and labour for, earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.50 metre below normal ground level connected to galvanised steel earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised steel and connected to main switch boardor main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54cm x 54cm x 5cm reinforced with 8mm dia. TMT bars @150mm centre to centre both ways, with one handle for lifting made out of 8mm dia MS bar, provision of funnel, wire mesh, 20mm bore galvanised steel tubing (medium grade) for watering, charcoal or coke and salt in alternate layers, 15mm bore galvanised steel tubing light grade for protection of earth lead connection, necessar excavation and earth work in any type of soil complete all as specified and indicated on electrical plate No.3 of SSR Part-I (2009) including testing on completion. (Note: GI earth strp and protection pipe upto 7.5metres shall be deemed to be included in unit quoted rate). |
| 114 | Supply and fix for, GI wire dia 4mm size, complete all as specified and directed. |
| 115 | Material labour for 32 mm outer dia3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polypropylene random fittings laid in trenches, complete all as specified and as directed. |
| 116 | Making connection of PP-R distribution branch with PP-R main of 32mm size by providing and fixing tee including cutting and making fusion joint etc., complete all as specified and as directed. |
| 117 | Supply and fix in repairs for, PP-R gate valves (brass inserted) for 32 mm outer dia of pipes complete all as specified and as directed. |
| 118 | Material and filling in dry sand in cable trenches before and after the cable are laid, as in sand cushioning to cable for protection of cable, complete all as specified and directed. |
| 119 | Supply and laying of sub class "B" bricks, old size, in cable trenches, as cable protection, complete all as specified and directed. |
| 120 | Supply, laying, jointing and testing of LT XLPE insulated, PVC sheathed , armoured (heavy duty)electric cables with aluminiumconductor for working voltage upto and including 1100 volts of cross sectional area 25 Sqmm, 4.0 core, complete all as specified and directed. |
| 121 | Supply and laying of galvanisedsteel tubing, 50mm bore, light grade in trenches or fixed to poles/ walls/ floor/ road crossing etc. for cable protection, complete all as specified and directed. |
| 122 | Horizontal boring of holes, under road/foot path etc., not exc. 10 metres in length in any type of soil, suitable for passing through upto 100mm bore, galvanised steel tubing, complete all as specified and directed. |
| 123 | Cutting chase for pass cable protection pipe etc. in existing plain cement concrete pavement/ road/ hardstanding / aprons etc. and making good, cutting in plain cement concrete (1:3:6) type C1 (using 20mm graded broken stone aggregate), exc. 20cm but not exc. 50cm girth, complete all as specified and directed. |
| 124 | Supply, installation, testing and commissioning, inverter type split AC unit 2.0 Ton capacity, indoor and outdoor units with cordless remote control for indoor unit and with in built air ioniser and plasma filterfor better indoor air quality with BEE 5 star rating and EER 3.2, operated in single phase AC supply, including necessary interconnection refrigerant copper tubing of required dia and length duly insulated , condense water PVC rigid piping not less than 19mm external dia and 2mm wall thickness, outer unit stand made out of stainless steek including leakage testing duly filled with CFC free refrigerant for fixingof compressor as upto the required pressure as per manufacturer"s instructions and including neccessary civil work i.e. making hole, PCC work, MS stand/ bracket, duly painted and connection etc., complete all as specified and directed. |
| 125 | Supply and fix for, voltage stabilizer for automatic operation, single phase naturally air cooled designed for input voltage variation between 130 volt to 250 volt with output voltage stabilized at 230 volt with accuracy of +2.5%, capacity 5 KVA complete all as specified and directed. |
| 126 | Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
